Export limit exceeded: 413979 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 413979 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 413979 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (413979 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98818 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/slab: do not wake up kswapd in __kfree_rcu_sheaf() Since kfree_rcu() can be called under pi_lock (a raw spinlock in the scheduler), kfree_rcu() itself should never allocate memory with __GFP_KSWAPD_RECLAIM as waking up kswapd ends up acquiring pi_lock, which leads to a deadlock. Reproducing the issue even intentionally was not straightforward. The set_cpus_allowed_force() path that is called under pi_lock is exercised very rarely, and competing tasks that allocate memory will most likely wake kswapd up. Therefore the existence of the deadlock was verified with a modified kernel that has a lockdep map for waking up kswapd: ====================================================== WARNING: possible circular locking dependency detected 7.2.0-rc1-slab-for-next+ #10 Not tainted ------------------------------------------------------ git/6660 is trying to acquire lock: ffff8e524533c550 (&p->pi_lock){-.-.}-{2:2}, at: _raw_spin_lock_irqsave+0x12/0x20 but task is already holding lock: ffff8e57bffff1a0 (&pgdat->kswapd_wait){....}-{3:3}, at: _raw_spin_lock_irqsave+0x12/0x20 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&pgdat->kswapd_wait){....}-{3:3}: __lock_acquire+0x5a4/0xc50 lock_acquire.part.0+0xb7/0x240 lock_acquire+0x70/0x170 __raw_spin_lock_irqsave+0x44/0x80 _raw_spin_lock_irqsave+0x12/0x20 __wake_up_common_lock+0x31/0xa0 __wake_up+0x20/0x40 kswapd_wakeup_wake+0x7e/0x110 wakeup_kswapd+0x295/0x320 wake_all_kswapds+0xac/0x1a0 __alloc_pages_slowpath.constprop.0+0x282/0xf80 __alloc_frozen_pages_noprof+0x32a/0x360 alloc_slab_page+0x2e/0x160 allocate_slab+0x82/0x420 new_slab+0x52/0xb0 refill_objects+0x13d/0x190 refill_sheaf+0x5d/0xd0 __pcs_replace_empty_main+0x230/0xb10 [...] -> #1 (kswapd_wakeup){-.-.}-{0:0}: __lock_acquire+0x5a4/0xc50 lock_sync.part.0+0x75/0x100 lock_sync+0x36/0x70 might_wakeup_kswapd+0x61/0xa0 __kfree_rcu_sheaf+0x33/0xd90 kvfree_call_rcu+0x1d4/0x3b0 set_cpus_allowed_force+0x163/0x220 cpuset_cpus_allowed_fallback+0x18b/0x240 select_fallback_rq+0x1e6/0x250 [...] -> #0 (&p->pi_lock){-.-.}-{2:2}: check_prev_add+0xe6/0xe00 validate_chain+0x51e/0x6e0 __lock_acquire+0x5a4/0xc50 lock_acquire.part.0+0xb7/0x240 lock_acquire+0x70/0x170 __raw_spin_lock_irqsave+0x44/0x80 _raw_spin_lock_irqsave+0x12/0x20 try_to_wake_up+0x77/0xa90 default_wake_function+0x27/0x60 autoremove_wake_function+0x23/0xb0 __wake_up_common+0xb8/0x170 __wake_up_common_lock+0x51/0xa0 __wake_up+0x20/0x40 kswapd_wakeup_wake+0x7e/0x110 wakeup_kswapd+0x295/0x320 wake_all_kswapds+0xac/0x1a0 __alloc_pages_slowpath.constprop.0+0x282/0xf80 __alloc_frozen_pages_noprof+0x32a/0x360 alloc_slab_page+0x2e/0x160 allocate_slab+0x82/0x420 new_slab+0x52/0xb0 refill_objects+0x13d/0x190 refill_sheaf+0x5d/0xd0 __pcs_replace_empty_main+0x230/0xb10 [...] other info that might help us debug this: Chain exists of: &p->pi_lock --> kswapd_wakeup --> &pgdat->kswapd_wait Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&pgdat->kswapd_wait); lock(kswapd_wakeup); lock(&pgdat->kswapd_wait); lock(&p->pi_lock); *** DEADLOCK *** 3 locks held by git/6660: #0: ffff8e519f0e9e20 (&type->i_mutex_dir_key#6){++++}-{4:4}, at: lookup_slow+0x2d/0x60 #1: ffffffff8a31c460 (kswapd_wakeup){-.-.}- ---truncated--- | ||||
| CVE-2026-98855 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: of/overlay: put property on deadprops only after changeset add succeeds add_changeset_property() links a new property of a not-yet-live target node into the node's deadprops list before handing it to of_changeset_add_property(). If that fails, the error path frees the property but leaves the freed pointer linked in deadprops, and of_node_release() frees it a second time when the aborted overlay's node is released. Record the changeset entry first and link the property into deadprops only on success. of_changeset_add_property() never looks at the node's property lists, so the order of the two steps is otherwise immaterial, and the error path frees a property that nothing references. | ||||
| CVE-2026-99002 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: validate pitch coming from userspace Validate the pitch, alongside the box dimensions before trying to copy data from the underlying surface. Fixes possible out of bounds reads with cursor snooping. | ||||
| CVE-2026-99009 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: connect the session socket without rfcomm_mutex An RFCOMM connect() issued while a BR/EDR link is being authenticated makes lockdep report a circular dependency, and the reported cycle is a real AB/BA between rfcomm_mutex and hdev->lock. rfcomm_security_cfm() is called from the HCI event path, which already holds hdev->lock: hci_rx_work() hci_event_packet() hci_cc_read_enc_key_size() [hdev->lock] hci_encrypt_cfm() [hci_cb_list_lock] rfcomm_security_cfm() [rfcomm_mutex] while an RFCOMM connect() from userspace takes the same two locks the other way round: rfcomm_sock_connect() rfcomm_dlc_open() [rfcomm_mutex] __rfcomm_dlc_open() rfcomm_session_create() kernel_connect() l2cap_sock_connect() l2cap_chan_connect() [hdev->lock] WARNING: possible circular locking dependency detected kworker/u131:1/1128 is trying to acquire lock: rfcomm_mutex, at: rfcomm_security_cfm+0x31/0x3e0 [rfcomm] but task is already holding lock: hci_cb_list_lock, at: hci_cc_read_enc_key_size+0x1d2/0xcc0 Chain exists of: rfcomm_mutex --> &hdev->lock --> hci_cb_list_lock hci_auth_complete_evt() and hci_encrypt_change_evt() reach the callback the same way. Both orders have to be seen in the same boot, which is why a BR/EDR connection alone is not enough to show it: a session set up by the remote side is created by rfcomm_accept_connection() in krfcommd, which calls kernel_accept() and never takes hdev->lock under rfcomm_mutex. Connecting a device that authenticates and encrypts the link and then calling connect() on an RFCOMM socket towards any address - the connect does not have to succeed, the order is recorded before the page timeout - reports it every time. Only the session socket has to be connected with the lock held, and it does not: nothing else can see the socket before it is put on the session list. So connect it first and take rfcomm_mutex afterwards, which removes the rfcomm_mutex -> hdev->lock order for good, rather than keeping the HCI event path out of rfcomm_mutex. rfcomm_session_create() becomes rfcomm_session_connect(), which returns the connected socket without touching the session list, and rfcomm_dlc_open() adds the session once it holds the lock again. If another opener added a session for the same pair while this socket was connecting, that session is used and this socket is dropped. __rfcomm_dlc_open() now takes the session it should use, and its state check runs after the lock is re-acquired, so a DLC that was opened or closed in the meantime is still handled. Over an existing ACL link the connection can complete before the session reaches the list, and the wakeup from the socket callback is then lost, so krfcommd is woken once the session is visible. Connecting without the lock opens a window in which the socket can be closed. The DLC is not on a session yet, so rfcomm_dlc_close() finds nothing to do and returns without touching it, and rfcomm_dlc_open() would then attach a DLC whose owner is gone. rfcomm_dlc_close() now marks such a DLC with RFCOMM_CLOSED, and rfcomm_dlc_open() checks the mark once it holds rfcomm_mutex again and drops the socket instead of attaching the DLC. The mark is cleared when an open starts, so a DLC that is reused is not affected. This covers both callers of rfcomm_dlc_open(), the socket and the tty layer. | ||||
| CVE-2026-99012 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Serialize concurrent connect calls iso_sock_connect() checks the socket state before taking the socket lock and drops the lock again before setting up a connection. Two callers can both pass the admission check while the socket is open or bound. Caller A can copy its destination for route selection, then caller B can replace the socket destination before A binds or connects the CIS. A then uses B's destination with the route selected for its own request. B can also proceed after A attaches a connection and sets BT_CONNECT. For deferred BIS setup, B can bind a second BIS and overwrite iso_pi(sk)->conn, leaving the first connection's reference and conn->sk back-pointer stranded. Concurrent CIS connects can likewise replace the socket's connection. Later teardown only detaches the current connection, so a callback on the old connection can race with socket release and access a freed socket. KASAN reported: BUG: KASAN: slab-use-after-free in iso_sock_hold+0xf7/0x1b0 Call Trace: iso_sock_hold+0xf7/0x1b0 iso_conn_del+0x7b/0x1d0 iso_connect_cfm+0x186/0x16a0 hci_conn_failed+0x154/0x280 hci_abort_conn_sync+0x3dc/0x7d0 hci_cmd_sync_work+0x173/0x300 Allocated by task 121: sk_alloc+0x2b/0x6d0 bt_sock_alloc+0x29/0x370 iso_sock_alloc.constprop.0+0x19/0x300 iso_sock_create+0x94/0x100 Freed by task 121: kfree+0x121/0x3c0 __sk_destruct+0x42b/0x540 iso_sock_release+0x29d/0x340 __sock_release+0xa1/0x260 Check admission under the socket lock and mark the connect operation in progress before publishing its destination. Keep that flag set across route lookup and connection setup, rejecting another connect with -EBADFD before it can change the destination or attach a connection. Clear the flag after either helper returns, including on failure, so a failed setup can be retried. A separate flag is needed because the socket lock must be released before acquiring the HCI device lock, while BT_CONNECT requires an attached connection. Keep the existing state transitions and the deferred CIS completion through iso_sock_recvmsg(). Reject an existing socket attachment in __iso_chan_add() before taking a new reference or publishing either pointer, so every caller preserves the connection association. Keep the same-socket, same-connection success case for deferred CIS setup. Reject an attached socket before BIS setup so a reusable BIS is not claimed before the attachment is rejected. In CIS setup, reject a different HCI connection before iso_conn_add() and drop the per-attempt HCI hold directly. An unowned iso_conn may still carry another reference after detachment, so its destruction cannot be relied on to release that hold. iso_listen_bis() creates a fresh PA HCI/ISO pair under the device lock, so the temporary iso_conn_put() frees the ISO candidate and drops its HCI hold on rejection. iso_conn_ready() uses a freshly allocated, unpublished child with no connection, making the socket-side rejection unreachable. | ||||
| CVE-2026-99024 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: optee: register TEE devices only once fully initialized optee_probe() called tee_device_register() on both the client and the supplicant device before the rest of struct optee had been initialized. tee_device_register() calls cdev_device_add(), which does two things at once: it creates /dev/tee0 and /dev/teepriv0, and it links the device into the tee class so that class_find_device() can find it. From that moment on the device is reachable both from user space via tee_open() and from kernel space via tee_client_open_context(). The only gate in teedev_open() is tee_device_get(), which merely checks that teedev->desc is non-NULL, which was already set by tee_device_alloc(). Therefore, there is effectively no gate at all. A context opened in that window can run against a struct optee where - optee->call_queue.mutex is not initialized by optee_cq_init() - optee->supp mutex and completions is not initialized by optee_supp_init() - optee->rpmb_dev_mutex is not initialized yet, - the message argument cache is not initialized by optee_shm_arg_cache_init() - optee->ctx is still NULL Any open session or invoke during this window takes uninitialized mutexes and dereferences a NULL pointer. Fix it by moving both tee_device_register() calls down to the point where all of struct optee is set up. [JW: adding fixes and cc] | ||||
| CVE-2026-99032 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: protect clcsock lifetime in smc_getname smc_getname() dereferences smc->clcsock without holding clcsock_release_lock. Link-group termination can release the CLC socket through smc_close_active_abort() while the SMC socket is still open, for example after shutdown(SHUT_WR). A getsockname() caller can load smc->clcsock, then the termination worker can clear the pointer and call sock_release() before the caller accesses clcsock->ops or invokes getname(). This causes a use-after-free; if the worker clears the pointer before the load, it causes a NULL dereference. The syscall's file reference keeps the SMC socket alive but does not prevent asynchronous release of its CLC socket. KASAN reported the following with test-only timing instrumentation: BUG: KASAN: slab-use-after-free in smc_getname+0x19e/0x1b0 Read of size 8 at addr ffff888109abb4e0 by task poc/103 Call Trace: smc_getname+0x19e/0x1b0 do_getsockname+0xe5/0x170 __sys_getsockname+0x8c/0x100 Allocated by task 95: sock_alloc_inode+0x1e/0x280 sock_alloc+0x3d/0x240 __sock_create+0x7e/0x430 smc_create+0x121/0x240 Freed by task 0: kmem_cache_free+0xcc/0x340 rcu_core+0x50a/0x1850 Last potentially related work creation: evict+0x446/0x6c0 smc_clcsock_release+0xa8/0xd0 smc_close_active_abort+0x26a/0x3a0 __smc_lgr_terminate.part.0+0x137/0x2e0 Hold clcsock_release_lock across the pointer check and the getname() callback to serialize with smc_clcsock_release(). Return -EBADF if the CLC socket has already been released, preserving the existing peer state check and the callback's return value otherwise. | ||||
| CVE-2026-91464 | 1 Oracle | 4 Graalvm, Graalvm For Jdk, Java Se and 1 more | 2026-10-24 | 5.3 Medium |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: JGSS). Supported versions that are affected are Oracle Java SE: 8u503, 8u503-perf, 11.0.32.1, 17.0.20.1, 21.0.12.1, 25.0.4.1, 27; Oracle GraalVM for JDK: 17.0.20.1 and 21.0.12.1; Oracle GraalVM Enterprise Edition: 21.3.19.1.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability does not apply to Java deployments, typically in servers, that load and run only trusted code (e.g., code installed by an administrator). CVSS 3.1 Base Score 5.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:N/A:N). | ||||
| CVE-2026-91463 | 1 Oracle | 5 Graalvm, Graalvm Enterprise Edition, Graalvm For Jdk and 2 more | 2026-10-24 | 5.3 Medium |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: JGSS). Supported versions that are affected are Oracle Java SE: 8u503, 8u503-perf, 11.0.32.1, 17.0.20.1, 21.0.12.1, 25.0.4.1, 27; Oracle GraalVM for JDK: 17.0.20.1 and 21.0.12.1; Oracle GraalVM Enterprise Edition: 21.3.19.1.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability does not apply to Java deployments, typically in servers, that load and run only trusted code (e.g., code installed by an administrator). CVSS 3.1 Base Score 5.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:H/I:N/A:N). | ||||
| CVE-2026-91462 | 1 Oracle | 5 Graalvm, Graalvm Enterprise Edition, Graalvm For Jdk and 2 more | 2026-10-24 | 5.9 Medium |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: JGSS). Supported versions that are affected are Oracle Java SE: 8u503, 8u503-perf, 11.0.32.1, 17.0.20.1, 21.0.12.1, 25.0.4.1, 27; Oracle GraalVM for JDK: 17.0.20.1 and 21.0.12.1; Oracle GraalVM Enterprise Edition: 21.3.19.1.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability can only be exploited by supplying data to APIs in the specified Component without using Untrusted Java Web Start applications or Untrusted Java applets, such as through a web service. CVSS 3.1 Base Score 5.9 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:H/A:N). | ||||
| CVE-2026-91461 | 1 Oracle | 5 Graalvm, Graalvm Enterprise Edition, Graalvm For Jdk and 2 more | 2026-10-24 | 3.7 Low |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: JSSE). Supported versions that are affected are Oracle Java SE: 8u503, 8u503-perf, 11.0.32.1, 17.0.20.1, 21.0.12.1, 25.0.4.1, 27; Oracle GraalVM for JDK: 17.0.20.1 and 21.0.12.1; Oracle GraalVM Enterprise Edition: 21.3.19.1.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via TLS to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability can only be exploited by supplying data to APIs in the specified Component without using Untrusted Java Web Start applications or Untrusted Java applets, such as through a web service. CVSS 3.1 Base Score 3.7 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N). | ||||
| CVE-2026-98839 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 6.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vt: selection: Fix unsigned underflow and slab-out-of-bounds read in paste_selection() In paste_selection(), the loop copies min_t(unsigned int, vc_sel.buf_len - pasted,tty->receive_room) bytes per iteration into tty_ldisc_receive_buf() and increments pasted += count. Because the selection mutex (vc_sel.lock) is dropped inside the loop Whenever the line discipline buffer fills up and paste_selection() sleeps on tty->write_wait, a concurrent TIOCLINUX (TIOCL_SETSEL) ioctl can replace vc_sel.buffer with a shorter selection and reduce vc_sel.buf_len below pasted. When paste_selection() resumes, vc_sel.buf_len - pasted underflows as an unsigned integer to a large positive value, causing tty_ldisc_receive_buf(ld, vc_sel.buffer + pasted, NULL, count) to read up to 4094 bytes out-of-bounds past the newly allocated vc_sel.buffer. Fix this by terminating the loop when pasted >= vc_sel.buf_len. Kernel stack trace (Linux 7.3.0-rc3): ================================================================== BUG: KASAN: slab-out-of-bounds in n_tty_receive_buf_common+0xa01/0x1650 Read of size 4094 at addr ffff888101c58010 by task kworker/u17:1/65 Workqueue: events_unbound flush_to_ldisc Call Trace: <TASK> dump_stack_lvl+0x70/0xa0 print_report+0x153/0x4c6 kasan_report+0xf1/0x120 kasan_check_range+0x11c/0x200 __asan_memcpy+0x29/0x70 n_tty_receive_buf_common+0xa01/0x1650 tty_ldisc_receive_buf+0x66/0x110 tty_port_default_receive_buf+0x6b/0xb0 flush_to_ldisc+0x1b4/0x410 process_one_work+0x6ff/0x1110 worker_thread+0x4a8/0xb70 kthread+0x307/0x3e0 ret_from_fork+0x3ed/0x680 </TASK> ================================================================== | ||||
| CVE-2026-98842 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: module: fix lost error code from codetag_load_module() If codetag_load_module() fails, err is not set to reflect the failure and load_module() returns 0 after the module has been torn down. Also, if the module is a livepatch, mod->klp_info allocated by copy_module_elf() leaks on this error path. Free it via a new livepatch_cleanup label. | ||||
| CVE-2026-98846 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sctp: check RCV_SHUTDOWN after the sendmsg connect wait sctp_wait_for_connect() drops the socket lock while it sleeps. An out-of-the-blue ABORT can then be processed from the socket backlog and unlink the association. If a concurrent shutdown(fd, SHUT_RD) sets RCV_SHUTDOWN, the waiter breaks with err == 0 before checking asoc->base.dead. Its final sctp_association_put() can then free the association, leaving sctp_sendmsg_to_asoc() to continue with a dangling pointer. Check RCV_SHUTDOWN along with the wait error in sctp_sendmsg_to_asoc() before using the association again. The check only accesses the socket, so it needs no additional association reference. Return the existing -ESRCH so that sctp_sendmsg() skips freeing a new association that may already have been destroyed. Keep sctp_wait_for_connect() unchanged to preserve its behavior for the connect() caller. | ||||
| CVE-2026-98852 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: extend IPv6 exthdr detection of tunneled packets Commit c4336a07eb6b ("net: correctly handle tunneled traffic on IPV6_CSUM GSO fallback") split skb_gso_has_extension_hdr() into mutually exclusive branches on skb->encapsulation. This did not yet address all paths: 1. With skb->encapsulation set, the outer header is not checked. IPv6 tunnels such as ip6_gre and ip6_tunnel add an outer Destination Options header by default (encap_limit). Their GSO packets skip software GSO, then skb_csum_hwoffload_help() sees the outer extension header and calls skb_checksum_help() on the GSO skb, which warns and drops it. 2. Tunnels over IPv6 without an outer transport header, such as ip6_tunnel, leave skb->transport_header at the inner transport header. skb_network_header_len() then spans the outer IPv6, tunnel and inner IP headers, a false positive. 3. UDP tunnels without an inner network header, such as SCTP-in-UDP or PSP, have no inner IPv6 header to check. Decide on the outer header alone. 4. Directly dereferencing inner_ip_hdr(skb)->version without skb_header_pointer() is unsafe. Instead, check ipv6_ext_hdr(nexthdr) on the outer IPv6 header and, if set, on the inner IPv6 header. Read the headers with skb_header_pointer(). Keep the skb_network_header_len() check when !skb->encapsulation to also catch encapsulated packets without skb->encapsulation (e.g., virtio). Use the same helper in skb_csum_hwoffload_help(). Its open coded test has the false positive of (2) and ignores the inner header. Background: checksum offload of tunneled packets invariants: Non-GSO skb: - If the inner packet is CHECKSUM_PARTIAL, Local Checksum Offload computes the outer checksum in software and the device offloads only the inner L4 checksum. - If the inner packet is CHECKSUM_NONE (e.g., SCTP-in-UDP, ESP-in-UDP, Remote Checksum Offload), the device offloads the outer UDP or GRE checksum instead. GSO skb: - A device with NETIF_F_GSO_UDP_TUNNEL_CSUM or NETIF_F_GSO_GRE_CSUM computes both inner and outer checksums per segment. The outer checksum is seeded with only the pseudo-header checksum. A NETIF_F_IPV6_CSUM device must parse through the outer headers to reach the inner ones. | ||||
| CVE-2026-99038 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: memstick: rtsx_usb_ms: complete requests after eject instead of dropping them memstick_check() can pass its host->removing check just before rtsx_usb_ms_drv_remove() sets eject/removing. Its next request is then silently dropped: rtsx_usb_ms_request() skips schedule_work() once eject is set, and drv_remove's cancel_work_sync() can also cancel a queued handle_req before it picks the request up. Nobody completes card->mrq_complete. Once memstick core waits for requests without a timeout ("memstick: core: wait for request completion before freeing card"), this hangs removal: memstick_check() never returns and memstick_remove_host() blocks in flush_workqueue(): INFO: task kworker/u10:3:65 blocked for more than 20 seconds. Workqueue: kmemstick memstick_check __wait_for_common memstick_check INFO: task kworker/1:1:33 blocked for more than 20 seconds. Workqueue: usb_hub_wq hub_event __flush_workqueue memstick_remove_host rtsx_usb_ms_drv_remove Never drop a request. rtsx_usb_ms_request() always schedules handle_req, and handle_req fails requests with -ENOMEDIUM once eject is set, without touching the device. drv_remove flushes handle_req instead of cancelling it, and cancels it only after memstick_remove_host(), when no new request can arrive, so it cannot run on a freed host. The host_mutex drain in drv_remove is removed: handle_req always leaves host->req NULL when it finishes, so the drain never had anything to do, and it would now race with handle_req. | ||||
| CVE-2026-98787 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix missing migration protection in __rhtab_map_lookup_and_delete_batch() bpf_mem_cache_free_rcu() uses this_cpu_ptr() which requires migration to be disabled. All callers of rhtab_delete_elem() disable migration except __rhtab_map_lookup_and_delete_batch(), which calls it under rcu_read_lock() only. On CONFIG_PREEMPT_RCU, rcu_read_lock() does not disable preemption or migration, so the task can migrate between CPUs during the delete loop, causing this_cpu_ptr() to trigger: BUG: using smp_processor_id() in preemptible [00000000] code Fix by wrapping the delete loop in migrate_disable()/migrate_enable() in __rhtab_map_lookup_and_delete_batch(), matching the migration protection that the other callers already provide. | ||||
| CVE-2026-98804 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: page_pool: fix use-after-free in page_pool_recycle_ring_bulk() With CONFIG_PAGE_POOL_STATS=y, page_pool_recycle_ring_bulk() updates the recycle stats after dropping the producer lock. If it just recycled the last inflight netmems of a pool being destroyed, page_pool_release() can pass its producer-lock barrier and free the pool before recycle_stat_add() runs. Commit fcc680a647ba7 ("page_pool: allow mixing PPs within one bulk") moved this stat update after the unlock. Commit 271683bb2cf32 ("page_pool: Fix use-after-free in page_pool_recycle_in_ring") later added the barrier, but only fixed page_pool_recycle_in_ring(). Move the update back under the lock. | ||||
| CVE-2026-98807 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: Fix slab-out-of-bounds when handling team device events The mlx5_handle_changeupper_event() and mlx5_handle_changeinfodata_event() functions check for LAG masters (which includes both bonding and team devices) but only call bonding-specific APIs. When processing team device events, calling bond_slave_get_rcu() and bond_is_slave_inactive() on team_port structures causes KASAN to detect an out-of-bounds memory access since team_port is smaller than bond slave. Fix this by wrapping the bond-specific API calls with a check for bonding devices. This allows the function to still process LAG events for both bonding and teams but only calls bond-specific functions when dealing with actual bonding devices. For mlx5_handle_changeinfodata_event(), keep the explicit bond check as mlx5 doesn't handle state information for team ports anyway. Tested with Mellanox ConnectX-5 on Linux 7.2.0-rc6: - Bonding: PASS (no regressions) - Team device: PASS (no KASAN errors) | ||||
| CVE-2026-98812 | 1 Linux | 1 Linux Kernel | 2026-10-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mctp: publish the mctp_dev only after it is initialised mctp_add_dev() links the new mctp_dev into dev->mctp_ptr before mdev->dev is assigned, so a reader that picks the device up in that window dereferences a net_device pointer that is still NULL: KASAN: null-ptr-deref in range [0x00000000000000b0-0x00000000000000b7] Call Trace: <TASK> ? __pfx_mctp_sendmsg (./include/linux/sockptr.h:49) ? __pfx_mctp_dst_output (net/mctp/route.c:41) ? selinux_socket_sendmsg (security/selinux/hooks.c:5278) ____sys_sendmsg (net/socket.c:775 (discriminator 1) net/socket.c:790 (discriminator 1) net/socket.c:2684 (discriminator 1)) ? __pfx_____sys_sendmsg (net/socket.c:1131) ? __pfx_copy_msghdr_from_user (net/socket.c:2590) ? update_cfs_rq_load_avg (kernel/sched/fair.c:5478) ___sys_sendmsg (net/socket.c:2738) ? __pfx____sys_sendmsg (net/socket.c:2625) ? perf_event_task_tick (./include/linux/rcupdate.h:838) ? sched_tick (kernel/sched/core.c:5818) ? clockevents_program_event (kernel/time/clockevents.c:372) ? fdget (./include/linux/rcupdate.h:873 fs/file.c:1100) __sys_sendmsg (net/socket.c:2770) ? __pfx___sys_sendmsg (net/socket.c:2751) do_syscall_64 (arch/x86/entry/syscall_64.c:63) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) </TASK> Fix by publishing only once the object is fully initialised: __mctp_dev_get() runs under rcu_read_lock() only and hands this object to readers as soon as mctp_ptr is assigned, so they must never observe mdev->dev == NULL. | ||||