Export limit exceeded: 414020 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 414020 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 414020 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (414020 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99050 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gpio: mpsse: fix race when arming the IRQ poll worker gpio_mpsse_irq_enable() arms the poll worker before publishing it: schedule_work() runs before the worker is added to priv->workers. If gpio_mpsse_disconnect() walks the list in that window it misses the worker, and once disconnect returns, the USB core frees mpsse_priv while the orphaned gpio_mpsse_poll() work keeps accessing it, causing a use-after-free. Fix this by publishing and arming the worker in one irq_spin critical section. Teardown walks the same list under irq_spin, so a worker found on the list is guaranteed to be armed, and cancel_work_sync() handles it whether it is queued or running. A worker armed after the disconnect walk would still be missed, so also set a new priv->dying flag under irq_spin before the teardown walk, and check it in the same critical section, freeing it via kfree_rcu() instead when the device is going away, since kfree() would be called with the IRQ core's raw spinlock held and may sleep on PREEMPT_RT. schedule_work() is safe to call with irq_spin held, and the next probe gets a fresh mpsse_priv, so the flag never needs to be cleared. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-99046 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: gve: fix XSK buffer leak on error descriptor When the error bit is set in the RX completion descriptor, the buf_state and its attached buffer should be freed. In the case of AF_XDP ZC, the XSK buffer was not freed, leading to a leak. This issue was caught by LLM. | ||||
| CVE-2026-99042 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/net: populate CONNECT filter fields for 24-byte sockaddr_in6 io_connect_bpf_populate() fills connect.port and connect.v6_addr for AF_INET6 only when addr_len >= sizeof(struct sockaddr_in6), i.e. 28 bytes. The IPv6 connect paths accept SIN6_LEN_RFC2133 (24 bytes), which already holds sin6_port and sin6_addr. io_connect() passes addr_len to the socket layer unchanged. At addr_len 24 the filter sees family AF_INET6 with port and address zero, while the kernel connects to the real destination. A filter that denies an IPv6 port or address is bypassed. Denying connect.port == P rejects [::1]:P with -EACCES at addr_len 28 but connects at addr_len 24. Use SIN6_LEN_RFC2133 as the threshold. sin6_scope_id stays zero when absent. The threshold mismatch was found by an AI coding assistant (Claude Code) comparing this hook against the net/ipv6 length checks on my instructions; it also drafted the reproducer and this patch. I verified the bypass and the fix in a VM on 7.3-rc6 and that 7.2 has the same code. | ||||
| CVE-2026-99032 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: protect clcsock lifetime in smc_getname smc_getname() dereferences smc->clcsock without holding clcsock_release_lock. Link-group termination can release the CLC socket through smc_close_active_abort() while the SMC socket is still open, for example after shutdown(SHUT_WR). A getsockname() caller can load smc->clcsock, then the termination worker can clear the pointer and call sock_release() before the caller accesses clcsock->ops or invokes getname(). This causes a use-after-free; if the worker clears the pointer before the load, it causes a NULL dereference. The syscall's file reference keeps the SMC socket alive but does not prevent asynchronous release of its CLC socket. KASAN reported the following with test-only timing instrumentation: BUG: KASAN: slab-use-after-free in smc_getname+0x19e/0x1b0 Read of size 8 at addr ffff888109abb4e0 by task poc/103 Call Trace: smc_getname+0x19e/0x1b0 do_getsockname+0xe5/0x170 __sys_getsockname+0x8c/0x100 Allocated by task 95: sock_alloc_inode+0x1e/0x280 sock_alloc+0x3d/0x240 __sock_create+0x7e/0x430 smc_create+0x121/0x240 Freed by task 0: kmem_cache_free+0xcc/0x340 rcu_core+0x50a/0x1850 Last potentially related work creation: evict+0x446/0x6c0 smc_clcsock_release+0xa8/0xd0 smc_close_active_abort+0x26a/0x3a0 __smc_lgr_terminate.part.0+0x137/0x2e0 Hold clcsock_release_lock across the pointer check and the getname() callback to serialize with smc_clcsock_release(). Return -EBADF if the CLC socket has already been released, preserving the existing peer state check and the callback's return value otherwise. | ||||
| CVE-2026-99030 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: skbuff: don't leave stale bytes in skb_copy_and_csum_bits() When skb_copy_and_csum_bits() reaches unreadable frags it returns 0 after copying only the linear part, and the rest of the caller's buffer is left as it was. The callers copy into a buffer that is about to go out on the wire: an ICMP error quoting the offending packet, or a driver's TX bounce buffer in skb_copy_and_csum_dev(). Neither buffer is zeroed beforehand, so whatever was in memory there gets sent. Zero the part of the buffer we didn't fill. The checksum usually won't match the data any more, so the receiver will usually drop the packet, but either way it no longer carries anything it shouldn't. Only zero for a positive @len, a negative one from a broken caller must not turn into a huge memset(). | ||||
| CVE-2026-99018 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: riscv: entry: gate shadow call stack reload on sstatus.SPP, not tp Under CONFIG_SHADOW_CALL_STACK, handle_exception() reloads the kernel shadow call stack pointer (gp) only when the trap came from userspace. It made that decision with scs_load_current_if_task_changed, which compares the trap-time tp (read back from sscratch into s5) against the current tp: beq \prev, tp, _skip_scs scs_load_current _skip_scs: tp is a user-writable register. A user task that sets tp to the linear-map address of its own task_struct (¤t) before trapping makes the comparison succeed (can achieve by brute force with KASLR enable under our test), so the kernel skips scs_load_current and keeps running with the gp that userspace left in place. Under CONFIG_SHADOW_CALL_STACK gp is the shadow call stack pointer and load_global_pointer is a no-op, so the compiler-emitted "sd ra, -8(gp)" / "ld ra, -8(gp)" in every non-leaf function then write to, and return through, an attacker-controlled address -- an unprivileged kernel arbitrary-write and control-flow-hijack primitive. The poisoned gp is saved to task_struct.scs_sp on return, so the reload is skipped on every subsequent entry as well. Decide "came from userspace" from the hardware sstatus.SPP bit (already in s1 at this point) instead of from tp, mirroring the check that ret_from_exception already uses a few instructions later. SPP is written by hardware on trap entry and cannot be forged from U-mode. Legitimate behaviour is unchanged: user entries (SPP=0) reload the task shadow call stack, nested kernel entries (SPP=1) skip it. | ||||
| CVE-2026-99017 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: riscv: errata: select RISCV_ALTERNATIVE_EARLY for THEAD GHOSTWRITE errata_probe_ghostwrite() only marks the CPU as vulnerable when it is called at the RISCV_ALTERNATIVES_EARLY_BOOT stage, and the mitigation in ghostwrite_enable_mitigation() only takes effect if the vulnerable state was recorded before the boot alternatives are patched. The early boot stage is only executed when CONFIG_RISCV_ALTERNATIVE_EARLY is enabled, which currently is only selected by ERRATA_THEAD_MAE. In a kernel built with ERRATA_THEAD_GHOSTWRITE=y but ERRATA_THEAD_MAE=n, the early alternatives never run, so ghostwrite_state is never set to VULNERABLE: ghostwrite_enable_mitigation() returns false, xtheadvector remains enabled, and sysfs reports "Not affected" on a vulnerable T-Head C9xx CPU. Select RISCV_ALTERNATIVE_EARLY from ERRATA_THEAD_GHOSTWRITE so that the vulnerability is detected in the early boot stage and the default mitigation is applied. | ||||
| CVE-2026-99016 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: riscv: futex: untag the user pointer before the atomic access access_ok() checks untagged_addr(uaddr), but arch_futex_atomic_op_inuser() and futex_atomic_cmpxchg_inatomic() hand the raw uaddr to the inline asm amoswap/amoadd/.../lr.w+sc.w through the "+m" (*uaddr) operand. When the tagged address ABI is enabled (CONFIG_RISCV_ISA_SUPM, prctl PR_SET_TAGGED_ADDR_CTRL with PMLEN != 0), those two addresses differ: a user pointer whose top PMLEN bits hold a tag passes access_ok() after untagging, but the atomic is then performed on the still-tagged raw address. Supervisor-mode data accesses are not subject to the U-mode pointer masking (that is governed by menvcfg.PMM, which the kernel does not set), so hardware does not strip the tag for the kernel's own access. With Sv57 and PMLEN=16 the tag bits overlap the canonical-address bits, so a tagged pointer can name a canonical kernel virtual address (e.g. in the linear map) whose untagged form is a valid user address. An unprivileged process can thus make FUTEX_WAKE_OP perform an atomic read-modify-write on an arbitrary kernel address, with the matching FUTEX_OP_CMP_* result serving as a read oracle. get_user()/put_user()/raw_copy_{to,from}_user() already untag the pointer after the access_ok() check; do the same in the futex helpers so the atomic operates on the address that was actually validated. | ||||
| CVE-2026-99014 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Fix command skb lifetime during scan setup During PA sync scan setup, hci_le_set_ext_scan_param_sync() gets the address used for the PA_LINK lookup from hci_sent_cmd_data(). The returned pointer borrows storage from sent_cmd or req_skb, without holding a reference to either skb. The scan worker runs on req_workqueue while hci_cmd_work() runs on the separate device workqueue. After the scan worker loads sent_cmd, the command worker can free and replace it before hci_sent_cmd_data() dereferences the skb. The command payload can also be freed between returning from the helper and comparing the address. The connection lookup's RCU critical section does not protect the command skb. KASAN reported: BUG: KASAN: slab-use-after-free in hci_sent_cmd_data+0x27c/0x2f0 Workqueue: hci0 hci_cmd_sync_work Call Trace: hci_sent_cmd_data+0x27c/0x2f0 hci_le_set_scan_param_sync+0x43a/0x850 hci_passive_scan_sync+0xb09/0x1460 hci_update_passive_scan_sync+0x47c/0x6e0 hci_le_pa_create_sync+0x200/0xa70 hci_cmd_sync_work+0x13c/0x290 Allocated by task 95: skb_clone+0x13f/0x340 hci_cmd_work+0x2a9/0x7e0 Freed by task 95: kmem_cache_free+0xba/0x3a0 hci_cmd_work+0x29c/0x7e0 Use hdev->lock to serialize the address snapshot with sent_cmd replacement. Protect req_skb replacement and completion cleanup with the same lock because the helper falls back to that skb. Copy the address before releasing the lock and use the copy for the existing RCU-protected connection lookup. Release the mutex before sending or waiting for commands, preserving the lookup and completion ordering. | ||||
| CVE-2026-99013 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Reject concurrent BIS listener setup iso_sock_listen() drops the socket lock before calling iso_listen_bis() to preserve the hdev->lock ordering. Two concurrent listen() calls on the same broadcast socket can therefore both observe BT_BOUND. Caller A can attach connA and release the locks, then caller B can acquire them and attach connB before A publishes BT_LISTEN. __iso_chan_add() checks whether connB already has a socket, but not whether the socket already has a connection. The second attachment overwrites iso_pi(sk)->conn, leaking the connA reference and leaving connA->sk intact. Socket teardown follows connB, so later events on connA can cause a stale socket access. Recheck BT_BOUND and require iso_pi(sk)->conn to be NULL after taking both the HCI device and socket locks in iso_listen_bis(). The connection check also covers the interval between attachment and publication of BT_LISTEN. Reject a competing setup with -EBADFD through the existing unlock path before allocating another connection. A recorded KASAN report from an instrumented kernel shows: BUG: KASAN: slab-use-after-free in iso_sock_hold+0x119/0x1f0 Call Trace: iso_sock_hold+0x119/0x1f0 iso_conn_del+0xe4/0x270 hci_disconn_complete_evt+0x351/0x8c0 hci_event_packet+0x71b/0xb20 hci_rx_work+0x293/0x730 Allocated by task 93: sk_prot_alloc+0x113/0x220 sk_alloc+0x2b/0x6d0 bt_sock_alloc+0x29/0x370 iso_sock_alloc.constprop.0+0x19/0x300 iso_sock_create+0x94/0x100 Freed by task 93: kfree+0x121/0x3c0 __sk_destruct+0x42b/0x540 iso_sock_release+0x29d/0x340 __sock_release+0xa1/0x260 sock_close+0x10/0x20 | ||||
| CVE-2026-99012 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Serialize concurrent connect calls iso_sock_connect() checks the socket state before taking the socket lock and drops the lock again before setting up a connection. Two callers can both pass the admission check while the socket is open or bound. Caller A can copy its destination for route selection, then caller B can replace the socket destination before A binds or connects the CIS. A then uses B's destination with the route selected for its own request. B can also proceed after A attaches a connection and sets BT_CONNECT. For deferred BIS setup, B can bind a second BIS and overwrite iso_pi(sk)->conn, leaving the first connection's reference and conn->sk back-pointer stranded. Concurrent CIS connects can likewise replace the socket's connection. Later teardown only detaches the current connection, so a callback on the old connection can race with socket release and access a freed socket. KASAN reported: BUG: KASAN: slab-use-after-free in iso_sock_hold+0xf7/0x1b0 Call Trace: iso_sock_hold+0xf7/0x1b0 iso_conn_del+0x7b/0x1d0 iso_connect_cfm+0x186/0x16a0 hci_conn_failed+0x154/0x280 hci_abort_conn_sync+0x3dc/0x7d0 hci_cmd_sync_work+0x173/0x300 Allocated by task 121: sk_alloc+0x2b/0x6d0 bt_sock_alloc+0x29/0x370 iso_sock_alloc.constprop.0+0x19/0x300 iso_sock_create+0x94/0x100 Freed by task 121: kfree+0x121/0x3c0 __sk_destruct+0x42b/0x540 iso_sock_release+0x29d/0x340 __sock_release+0xa1/0x260 Check admission under the socket lock and mark the connect operation in progress before publishing its destination. Keep that flag set across route lookup and connection setup, rejecting another connect with -EBADFD before it can change the destination or attach a connection. Clear the flag after either helper returns, including on failure, so a failed setup can be retried. A separate flag is needed because the socket lock must be released before acquiring the HCI device lock, while BT_CONNECT requires an attached connection. Keep the existing state transitions and the deferred CIS completion through iso_sock_recvmsg(). Reject an existing socket attachment in __iso_chan_add() before taking a new reference or publishing either pointer, so every caller preserves the connection association. Keep the same-socket, same-connection success case for deferred CIS setup. Reject an attached socket before BIS setup so a reusable BIS is not claimed before the attachment is rejected. In CIS setup, reject a different HCI connection before iso_conn_add() and drop the per-attempt HCI hold directly. An unowned iso_conn may still carry another reference after detachment, so its destruction cannot be relied on to release that hold. iso_listen_bis() creates a fresh PA HCI/ISO pair under the device lock, so the temporary iso_conn_put() frees the ISO candidate and drops its HCI hold on rejection. iso_conn_ready() uses a freshly allocated, unpublished child with no connection, making the socket-side rejection unreachable. | ||||
| CVE-2026-99011 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SCO: serialise sco_conn lifetime against sco_recv_scodata() sco_recv_scodata() upgrades the weak hcon->sco_data back-pointer to a strong reference under hdev->lock: hci_dev_lock(hdev); hcon = hci_conn_hash_lookup_handle(hdev, handle); ... conn = sco_conn_hold_unless_zero(hcon->sco_data); hci_dev_unlock(hdev); but the pointer is cleared from the other side without that lock. When the last sco_conn reference is dropped, sco_conn_free() ran conn->hcon->sco_data = NULL; with no hdev->lock held, so the RX path could read hcon->sco_data and call kref_get_unless_zero() on an sco_conn that was concurrently freed: BUG: KASAN: slab-use-after-free in sco_conn_hold_unless_zero+0xbe/0x160 Write of size 4 by task kworker/u17:0 Workqueue: hci0 hci_rx_work Call Trace: sco_conn_hold_unless_zero+0xbe/0x160 sco_recv_scodata+0x13f/0x490 hci_rx_work+0x3af/0x730 kref_get_unless_zero() only guards against a zero refcount, not against the backing memory already being freed. Give hcon->sco_data an actual reference on the sco_conn it points to, so the object cannot be freed while the pointer is still installed, and only clear and drop it from sco_conn_del(), which runs under hdev->lock (its callers, sco_connect_cfm() and sco_disconn_cfm(), hold it). The reader in sco_recv_scodata() also takes hdev->lock, so the store and the read are now serialised: the RX path either observes NULL or a reference that is guaranteed to stay valid until it drops its own. sco_conn_add() no longer hands its kref_init() reference to the caller as the connection's only reference; that initial reference is the one owned by hcon->sco_data, and callers get their own via sco_conn_hold(). Because the sco_conn can now outlive the socket (the association keeps it alive until the link goes down), the hci_conn can no longer be dropped from sco_conn_free() without regressing socket close: closing a connected SCO socket must still tear the link down. Move hci_conn ownership to the socket instead: __sco_chan_add() takes an hci_conn reference and it is released from sco_chan_del() and sco_sock_destruct(), exactly once. The sco_conn no longer owns an hci_conn reference, so sco_conn_add() stops consuming one and sco_connect() drops the hci_connect_sco() reference on every path; sco_connect_cfm() no longer needs its hci_conn_hold() dance. | ||||
| CVE-2026-99006 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Prevent overstepping exec array boundary It is possible for eb_relocate_parse_slow() to call kvfree() on entries outside the original exec array during following scenario inside eb_relocate_parse_slow(): 1) eb_copy_relocations() allocates as many as eb->buffer_count copies for exec entries; 2) eb_parse() appends up to two VMAs, right after incrementing eb->buffer_count; 3) cleanup under "out" label uses this incremented buffer_count to release relocation pointers from exec array via kvfree(), not from VMA array. To amend this problem, ensure that relocation cleanup uses the original exec object count, excluding the VMAs appended by the command parser. (cherry picked from commit 2a0158925fb943c7ba8f3216e2734952128defc9) | ||||
| CVE-2026-99002 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: validate pitch coming from userspace Validate the pitch, alongside the box dimensions before trying to copy data from the underlying surface. Fixes possible out of bounds reads with cursor snooping. | ||||
| CVE-2026-98999 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix stale pinned_link entry when fb-pin performs the final unpin xe_bo_pin_external() and xe_bo_unpin_external() maintain the bo's pinned_link list membership in xe->pinned.late.external, based on whether the current call is the outermost pin or the final unpin. However, the same external bo's pin_count can also be raised and lowered directly by __xe_pin_fb_vma()/__xe_unpin_fb_vma(), which pin the bo as a display scanout buffer without going through xe_bo_pin_external()/xe_bo_unpin_external() at all, and have no notion of, or ownership over, pinned_link. If a bo is pinned both externally (e.g. dma-buf export) and as an fb, and the external unpin happens first, xe_bo_unpin_external() correctly observes pin_count > 1 and leaves the bo on pinned_link. When the fb unpin later performs the true last unpin (pin_count 1 -> 0), it never touches pinned_link, leaving the bo linked on xe->pinned.late.external indefinitely. Once the bo is subsequently freed, this stale list entry points into freed memory, corrupting the list and risking a use-after-free the next time the list is walked or spliced. The backup object pin/unpin sites in xe_bo_notifier_prepare_pinned()/ xe_bo_notifier_unprepare_pinned() have the same bypass characteristic, though they never add their bo to a pinned list, so are not affected by this particular list-corruption issue. Move the pinned_link removal into xe_bo_account_unpin(), which already runs on every unpin path (kernel, external, framebuffer, backup object) right before the true 1 -> 0 pin_count transition. Since list_del_init() only operates on the node itself, this removal is list-agnostic and safe to perform regardless of which list (external or kernel_bo_present) the bo happens to be linked on, or which code path is performing the final unpin. Drop the now-redundant explicit list_del_init() calls in xe_bo_unpin_external() and xe_bo_unpin(). v2: - New patch v3: - Rebased on changes to previous patch. (cherry picked from commit ca58d36a1f93af586ee93b340c9f9fd81312cc01) | ||||
| CVE-2026-98995 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: namespace: reset the old parent's ->overmount in mnt_change_mountpoint() __umount_mnt() resets ->overmount of the parent when it unmounts the mount that overmounts it. mnt_change_mountpoint() doesn't. It moves the mount to its new parent and leaves the old one pointing at it. For a mount that is moved beneath in attach_recursive_mnt() that doesn't matter. The new mount has already reset ->overmount of the old parent by the time the old top mount is moved onto it. It matters for reparent() though. propagate_umount() moves a surviving overmount onto the first ancestor that isn't going to be unmounted. The mount it was taken from is unmounted immediately afterwards. If a file descriptor keeps that unmounted mount alive ->overmount points at the moved mount. That's a dangling pointer and UAF as the moved mount is unmounted and freed. do_lock_mount() follows ->overmount from the target path under mount_lock. With a file descriptor on such a mount as the target of a mount beneath topmost_overmount() walks into the freed mount and do_lock_mount() takes references on whatever it finds there. So reset ->overmount of the old parent in mnt_change_mountpoint() the same way __umount_mnt() does. A mount's ->overmount is then always a mount that is attached to it. | ||||
| CVE-2026-98993 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: namespace: don't inherit MNT_UMOUNT in clone_mnt() MNT_UMOUNT gets raised on a mount that umount_tree() or umount_one() has taken out of its namespace. It's never cleared. __detach_mounts() unhooks a mount that carries it instead of unmounting it. disconnect_mount() lets an unmounted child stay attached only if its parent carries it. propagate_umount() takes it as the sign that a mount is going to be unmounted when it decides what else can be unmounted, where a chain of locked mounts ends and where a for reparenting an overmount. clone_mnt() copies the flags of the source and only masks MNT_INTERNAL_FLAGS which doesn't include MNT_UMOUNT. A mount that was lazily unmounted but is kept alive by a file descriptor can still be copied when its root is an nsfs or pidfs file because may_copy_tree() accepts those before checking whether the source is mounted at all: mount --bind /proc/self/ns/net /tmp/x exec 3< /tmp/x umount -l /tmp/x mount --bind /proc/self/fd/3 /tmp/y The mount on /tmp/y is attached to the caller's namespace with MNT_UMOUNT already set and every copy of it inherits the flag again. That causes a number of bugs: - Unlink its mountpoint from a mount namespace where it isn't one. __detach_mounts() takes it for a mount that was unmounted earlier, unhooks it from its parent and drops the reference the namespace holds on it. It stays in the namespace with one reference too few and as its own parent, so it can't be unmounted through the file descriptor anymore and the namespace never finds it again. When the namespace goes away it's leaked and points to a freed struct mnt_namespace that may_change_propagation() and anon_ns_root() read on the next propagation change or mount_setattr() through the file descriptor. - Make it shared and unmount a peer. trace_transfers() follows the flag from the peer into it and strips it from its peer group. - Let a propagated umount reach it. gather_candidates() marks it with T_UMOUNT_CANDIDATE but never puts it on the candidate list, so the mark is never cleared and every later propagated umount skips it. If it's the parent of a locked mount handle_locked() takes it as the cutoff and commits the locked child that should have stayed and disconnect_mount() leaves that child attached to it, unmounted under a mounted parent, which is what disconnect_mount() exists to prevent. When the namespace goes away umount_tree() visits the child a second time. And once __detach_mounts() has made it its own parent reparent() never finds the end of the chain of unmounted parents. A clone is a new mount that has never been unmounted. Add MNT_UMOUNT to MNT_INTERNAL_FLAGS so clone_mnt() never copies it. And warn when umount_tree() reaches a mount that already has it set. | ||||
| CVE-2026-98991 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: namespace: queue a mount only once for mount notifications mnt_notify_add() puts a mount on notify_list. It doesn't check whether the mount is on the list already. That's fine as long as every mount is queued at most once per namespace_sem hold. It isn't. propagate_umount() moves a surviving overmount off a stack of mounts that are going away and queues it as moved. shrink_submounts() and mark_mounts_for_expiry() call umount_tree() for several mounts under a single namespace_sem hold. So the second umount_tree() can take down exactly the mount the first one reparented, reparent it once more and so end up queueing it a second time. The second list_add_tail() cuts the mounts queued in between out of the list while the head still points at the last of them. notify_mnt_list() then only visits that one mount and the others are freed after the grace period with notify_list still pointing at them. Every later mount operation on the host walks freed memory: BUG: KASAN: slab-use-after-free in __list_add_valid_or_report Read of size 8 at addr ffff8881003d57e0 by task notify_dq/162 __list_add_valid_or_report+0x15c/0x1a0 mnt_add_to_ns+0x322/0x890 attach_recursive_mnt.isra.0+0xf2a/0x1a00 path_mount+0x139c/0x1d40 This needs a mount with MNT_SHRINKABLE to bind from. That's what finish_automount() creates (submounts of NFS, AFS and CIFS and the tracefs mount below debugfs). Bind mounts inherit the flag. A mount namespace with a FAN_MARK_MNTNS mark does the rest and root in a user namespace can have both. Initialize to_notify in alloc_vfsmnt() and leave a mount alone that is queued already. mnt_notify() looks at the state the mount has when the list is drained so a single entry per mount is enough. The move event for a mount that is unmounted under the same hold is lost. That's fine. The detach is what matters. | ||||
| CVE-2026-98988 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: namespace: keep covered mounts covered in OPEN_TREE_NAMESPACE open_tree(OPEN_TREE_NAMESPACE) creates a new mount namespace from a copy of the tree at the given path. The caller needs to be privileged over its current user namespace because the new mount namespace will be owned by it. It doesn't need to be privileged over the mount namespace the tree is copied from. An unprivileged user just needs to create a user namespace first. The copy follows the rules of a detached bind mount. Without AT_RECURSIVE only the mount itself is cloned and its children are left out. With AT_RECURSIVE unbindable mounts are skipped. Both is fine when the caller has privileges over the source mount namespace because it could unmount those mounts anyway. Not so for an unprivileged user in that mount namespace. For them a mount namespace copy is what unshare() does. copy_mnt_ns() copies everything including unbindable mounts and lock_mnt_tree() makes sure nothing can be unmounted in the copy. Nothing that was covered gets revealed. create_new_namespace() only does the locking and so the covered content is right there in the new mount namespace: # mount -t tmpfs none /tmp/otn; mkdir /tmp/otn/covered # echo hidden > /tmp/otn/covered/under.txt # mount -t tmpfs none /tmp/otn/covered uid 1000, after unshare(CLONE_NEWUSER): fd = open_tree(AT_FDCWD, "/tmp/otn", OPEN_TREE_NAMESPACE); setns(fd, CLONE_NEWNS); open("/covered/under.txt", O_RDONLY) -> "hidden" Covering paths with mounts is how container runtimes mask parts of /proc and /sys and how admins hide things. When the caller's user namespace doesn't own the source mount namespace copy the way unshare() does and refuse a non-recursive copy of a mount that has anything mounted below the requested directory and copy unbindable mounts in a recursive copy. A caller that is privileged over the source mount namespace sees no change. | ||||
| CVE-2026-98982 | 1 Linux | 2 Linux, Linux Kernel | 2026-10-24 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: namespace: don't let a pseudo dentry become the root of a mount d_alloc_pseudo() hands out dentries for pipes, sockets and other files that are never anyone's child or parent. They carry DCACHE_NORCU and dentry_free() frees them right away because no lockless path walk can ever reach them. That holds as long as such a dentry isn't the root of a mount. But bind mounting /proc/self/fd/<fd> of such a file does exactly that. Most callers of alloc_file_pseudo() put their files on kernel-internal mounts and may_copy_tree() refuses those. bpf_token_create() doesn't. It places the token file on the bpffs mount the caller handed it and that mount is in the caller's mount namespace so the clone goes through: mount --bind /proc/self/fd/<token> <file> open_tree(tokfd, "", AT_EMPTY_PATH | OPEN_TREE_CLONE) + move_mount() __follow_mount_rcu() then loads ->mnt_root of that mount, reads d_seq and d_flags of the dentry and only then checks mount_lock. The dentry can be gone by then. The final mntput() of an unmounted parent unhooks a child that stayed attached to it under mount_lock alone. When the child's holder does the final put right after that the root is dput() and freed immediately while a walker that found the mount hashed still looks at it. Refuse to clone a mount with a DCACHE_NORCU dentry as its root. Nothing sensible can be done with a bind mount of a bpf token anyway. | ||||