Export limit exceeded: 417223 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 417223 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417223 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80866 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tipc: avoid busy looping in tipc_exit_net() Blamed commit introduced a busy-wait loop in tipc_exit_net() to wait for pending UDP bearer cleanup works to complete: while (atomic_read(&tn->wq_count)) cond_resched(); This loop can busy-wait for a long time if cond_resched() is a NOP. This typically happens if the netns exit is executed by a high priority task, or under kernels configured without preemption (CONFIG_PREEMPT_NONE). In such cases, it wastes CPU cycles and can lead to soft lockups. Fix this by replacing the busy loop with wait_var_event(), allowing the thread to sleep properly until the work queue count reaches zero. Accordingly, update cleanup_bearer() to use atomic_dec_and_test() and wake_up_var() to wake up the waiter when the count drops to zero. This uses the global wait queue hash table, avoiding the need to bloat struct tipc_net with a wait_queue_head_t. The atomic_dec_and_test() provides the necessary memory barrier to ensure the wakeup is not missed. | ||||
| CVE-2026-80864 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix responder UAF on IB_QP_MAX_DEST_RD_ATOMIC modify_qp rxe_qp_from_attr() handles IB_QP_MAX_DEST_RD_ATOMIC outside the IB_QP_STATE path, so it holds no state_lock and runs while the responder task rxe_receiver() (recv_task on rxe_wq) is live. A modify_qp() setting only that attribute calls free_rd_atomic_resources() then alloc_rd_atomic_resources(), swapping qp->resp.resources[] while rxe_prepare_res()/find_resource() walk it; free_rd_atomic_resources() also leaves the cached pointer qp->resp.res dangling. A local unprivileged user can race the free/realloc into a use-after-free in rxe_receiver() (local DoS). Drain recv_task around the swap with rxe_disable_task()/rxe_enable_task(), as rxe_qp_reset() already does when tearing this array down, re-enabling only after alloc_rd_atomic_resources() succeeds so the responder never resumes against a NULL qp->resp.resources on the ENOMEM path. Also clear qp->resp.res in free_rd_atomic_resources(), like the rxe_resp.c completion paths. Reproduced under KASAN; the slab-use-after-free in rxe_receiver() is gone. | ||||
| CVE-2026-80861 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: xhci: bail out of setup if the controller is inaccessible xhci_gen_setup() locates the operational registers using the capability length read from the very first register: xhci->op_regs = hcd->regs + HC_LENGTH(readl(&xhci->cap_regs->hc_capbase)); If the controller is dead or has dropped off the bus, that read returns ~0, HC_LENGTH() truncates it to 0xff, and op_regs ends up 0xff bytes past the page-aligned MMIO base, i.e. unaligned. The first access through it, xhci_halt() -> xhci_handshake() reading op_regs->status, is then an unaligned readl() on device memory. arm64 faults on unaligned device accesses, so instead of xhci_handshake() catching the all-ones value and returning -ENODEV, setup oopses: xhci-pci-renesas 0005:08:00.0: Unable to change power state from D3cold to D0, device inaccessible xhci-pci-renesas 0005:08:00.0: xHCI Host Controller xhci-pci-renesas 0005:08:00.0: new USB bus registered, assigned bus number 1 Unable to handle kernel paging request at virtual address ffff80030a770103 ESR = 0x0000000096000021 FSC = 0x21: alignment fault Internal error: Oops: 0000000096000021 [#1] SMP pc : xhci_halt [xhci_hcd] Call trace: xhci_halt xhci_gen_setup xhci_pci_setup usb_add_hcd usb_hcd_pci_probe xhci_pci_common_probe xhci_pci_renesas_probe This was hit with a Renesas uPD720201 that failed to power up ("Unable to change power state from D3cold to D0, device inaccessible") yet still reached the HCD probe path. Read the capability register once, and if it reads back the all-ones value (as xhci_handshake() and xhci_reset() already test for), abort setup with -ENODEV before op_regs is derived from it. Reading it once also avoids re-reading a register that may change under a concurrent hot-removal. | ||||
| CVE-2026-80856 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fuse: fix invalidate lock leak on setattr writeback failure fuse_do_setattr() takes filemap_invalidate_lock() for a DAX truncate (fault_blocked = true) and releases it at the out:/error: labels. But when a writeback flush is also needed, a write_inode_now() failure returns directly and leaks the lock, so any later fault or truncate on the file stalls on the stale rwsem. For example, truncate(2) on a setuid file reaches fuse_do_setattr() with both ATTR_SIZE and ATTR_MODE set: truncate(2) └─ do_truncate() ├─ dentry_needs_remove_privs() # S_ISUID └─ notify_change() # KILL_SUID -> ATTR_MODE └─ fuse_setattr() # no killpriv: │ # ia_valid |= ATTR_MODE └─ fuse_do_setattr() ├─ filemap_invalidate_lock() # IS_DAX && is_truncate └─ write_inode_now() # is_wb && ATTR_MODE └─ if (err) # e.g. daemon -> -EIO return err # <- lock leaked Fix this by adding an unlock label that releases the lock before returning the error, and use it for the fuse_dax_break_layouts() failure path as well. | ||||
| CVE-2026-80855 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fuse: fix invalidate lock leak on open O_TRUNC DAX failure fuse_open() takes filemap_invalidate_lock() for a DAX truncate (dax_truncate = true) and releases it before the out_inode_unlock label. But when fuse_dax_break_layouts() fails, the goto out_inode_unlock skips the unlock and leaks the rwsem, so any later fault or truncate on the file stalls on the stale lock. fuse_dax_break_layouts() can fail with -ERESTARTSYS when a signal interrupts the wait for busy DAX pages to drain: open("file", O_RDWR | O_TRUNC) └─ fuse_open() ├─ filemap_invalidate_lock() # dax_truncate └─ fuse_dax_break_layouts() └─ dax_break_layout() └─ wait_page_idle() # TASK_INTERRUPTIBLE └─ fuse_wait_dax_page() # unlock, schedule, re-lock └─ signal → -ERESTARTSYS goto out_inode_unlock # <- lock leaked Fix this by moving filemap_invalidate_unlock() below the label so that all error paths release the lock, and rename the label to out_unlock as it now covers more than just the inode lock. | ||||
| CVE-2026-80852 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tls: device: fix out-of-bounds write in tls_append_frag() Found with syzkaller and a local syzbot instance running on top of a netdevsim TLS offload emulation; tls_device.c is otherwise only reachable on a machine with a NIC that implements the offload. tls_push_data() only checks whether the open record still has room for another frag at the bottom of its loop, and the MSG_MORE early break skips that check. The record survives to the next syscall with the frag count it already had, and tls_append_frag() does not check either, so with TLS_TX_ZEROCOPY_RO every splice(SPLICE_F_MORE) of a byte or two adds a non-coalescing pipe page and num_frags walks off the end of tls_record_info.frags[MAX_SKB_FRAGS]. Once the record is pushed, tls_push_record() runs the same index over sg_tx_data[MAX_SKB_FRAGS] and the sg_set_page() writes land on the destruct_work that follows it, which the workqueue then calls. The byte limit is fine because copy drops to 0 and the loop falls through to the same check; the frag count has no such feedback. Push the record rather than keep a full one open, which is what a plain TCP socket does - tcp_sendmsg_locked() uses tcp_mark_push() and new_segment in both the copy and the MSG_SPLICE_PAGES paths, and tls_sw already sets full_record when the sk_msg ring fills up, MSG_MORE or not. BUG: KASAN: slab-out-of-bounds in tls_append_frag ( net/tls/tls_device.c:269) Write of size 8 at addr ffff8881104d1530 by task tls_oob/450 CPU: 2 UID: 0 PID: 450 Comm: tls_oob Not tainted 7.2.0-rc7+ #329 PREEMPT Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120) print_report (mm/kasan/report.c:378 mm/kasan/report.c:482) kasan_report (mm/kasan/report.c:595) tls_append_frag (net/tls/tls_device.c:269) tls_push_data (net/tls/tls_device.c:518) tls_device_sendmsg (net/tls/tls_device.c:583) inet_sendmsg (net/ipv4/af_inet.c:865) sock_sendmsg (net/socket.c:775 net/socket.c:790 net/socket.c:813) splice_to_socket (fs/splice.c:884) do_splice (fs/splice.c:936 fs/splice.c:1349) __do_splice (fs/splice.c:1431) __x64_sys_splice (fs/splice.c:1634 fs/splice.c:1616) do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) </TASK> and, once the record is pushed: UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:300:24 index 18 is out of range for type 'skb_frag_t [17]' UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:301:41 index 18 is out of range for type 'scatterlist [17]' UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:302:39 index 18 is out of range for type 'scatterlist [17]' UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:307:38 index 26 is out of range for type 'scatterlist [17]' kernel tried to execute NX-protected page - exploit attempt? (uid: 0) BUG: unable to handle page fault for address: ffffea000411a680 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0011) - permissions violation Oops: Oops: 0011 [#1] SMP KASAN PTI Workqueue: ktls_device_destruct 0xffffea000411a680 RIP: 0010:0xffffea000411a680 Call Trace: <TASK> worker_thread (kernel/workqueue.c:3405 kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) </TASK> | ||||
| CVE-2026-80851 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gtp: serialize PDP context updates PDP contexts can be deleted through GTP_CMD_DELPDP or while the GTP network device is being unregistered. The latter is serialized by RTNL, but the generic-netlink delete path only holds RCU. Running both paths concurrently can therefore make both paths delete the same PDP context. The issue was found through static analysis and reproduced on a KASAN-enabled kernel by a simple two-thread program racing GTP_CMD_DELPDP against RTM_DELLINK: Oops: general protection fault, probably for non-canonical address KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127] RIP: gtp_genl_del_pdp+0x1c1/0x420 [gtp] RBP: dead000000000122 The second deletion dereferenced the poisoned hlist pprev pointer. Serialize gtp_pdp_add(), gtp_genl_del_pdp(), and gtp_dellink() with a shared mutex. Keep the mutex held until the final use of a PDP context in the NEWPDP path, and keep the RCU read-side section around the complete PDP context use in the DELPDP path. | ||||
| CVE-2026-80847 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tcp: clamp route advmss to TCP_MIN_MSS tcp_select_initial_window() assumes that callers never pass an MSS smaller than 1, but route-derived advmss values can violate that assumption. A too-small explicit RTAX_ADVMSS is one way to get there, but it is not the only one. The same divide-by-zero can also be reached through the "default advmss" path when RTAX_ADVMSS is left at 0 and the effective advmss is later driven down by route MTU and min_adv_mss. Introduce a tcp_dst_advmss() helper that clamps route advmss to TCP_MIN_MSS before TCP consumes it, and use it in the TCP paths that derive advmss from dst metrics. This keeps the effective MSS from dropping to zero before tcp_select_initial_window() rounds the receive window. | ||||
| CVE-2026-80841 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/packet: defer vmalloc TX_RING free until skbs finish AF_PACKET TX_RING skbs keep a raw pointer to their ring frame. The skb page references preserve page-backed ring blocks after pg_vec is freed, but they do not preserve a vmalloc mapping. tpacket_destruct_skb() currently drops the pending reference before writing the timestamp and TP_STATUS_AVAILABLE to the frame. Move the decrement after those stores. The smp_wmb() in __packet_set_status() orders the frame stores before the decrement. Also recheck pending TX frames under pg_vec_lock before non-closing ring replacement, so a racing send cannot add a pending skb between the initial check and the ring swap. Ring allocation can produce a mixture of page-backed and vmalloc-backed blocks. Allocate deferred-work storage during TX ring setup when the first vmalloc-backed block is encountered, and keep its pointer in the pg_vec allocation header. If allocation fails, return -ENOMEM from ring setup. On socket close, a non-NULL pointer identifies a vmalloc-backed vector without a scan. If TX skbs remain, defer the whole vector to system_long_wq. After pg_vec is detached, a late destructor can skip the pending decrement. Use socket write-memory accounting as the deferred lifetime gate instead: an skb remains charged through its final sock_wfree(), after all ring-frame accesses. The delayed work retains a socket reference and reschedules itself until no TX skbs remain. Move pending_refcnt release to packet_sock_destruct() so late skb destructors and deferred cleanup can safely use it after packet_release(). Page-backed teardown remains synchronous, and no lock is added to the TX completion hot path. | ||||
| CVE-2026-80837 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: don't queue packet path object notifications All file:line references below are against v7.2-rc4 (ac5b0e5651b1). The trace was captured on 7.2.0-rc6-kasan72rc6 (075b74841bd0), where the same lines apply. nft_obj_notify() is exported and reached from the packet path. Its only in-tree caller is nft_quota_obj_eval() (net/netfilter/nft_quota.c:68), which notifies with GFP_ATOMIC while evaluating a rule for a transiting packet, holding no mutex. Since commit 67cc570edaa0 ("netfilter: nf_tables: coalesce multiple notifications into one skbuff") that notification is no longer sent immediately. __nft_obj_notify() queues it onto nft_net->notify_list via nft_notify_enqueue() (net/netfilter/nf_tables_api.c:1211), which is a bare list_add_tail(). notify_list has no lock of its own (include/net/netfilter/nf_tables.h:1951), it is serialised by commit_mutex: the six other enqueue sites all run inside a netlink transaction, and the drain in nft_commit_notify() (net/netfilter/nf_tables_api.c:10746) does list_del() + kfree_skb() from nf_tables_commit() with commit_mutex held. Sending packets through a chain that references a depleted quota object therefore races an unlocked list_add_tail() against list_del() + kfree_skb() on another CPU. The WRITE_ONCE(prev->next, new) in __list_add() then stores through an sk_buff that has already been freed: BUG: KASAN: slab-use-after-free in __nft_obj_notify+0x2c5/0x2d0 Write of size 8 at addr ff110001047183c0 by task poc/76 CPU: 0 UID: 1000 PID: 76 Comm: poc Tainted: G W 7.2.0-rc6-kasan72rc6 #4 Call Trace: <IRQ> __nft_obj_notify (include/linux/list.h:164 include/linux/list.h:191 net/netfilter/nf_tables_api.c:1211 net/netfilter/nf_tables_api.c:8743) nft_quota_obj_eval (net/netfilter/nft_quota.c:68) nft_do_chain_inet nf_hook_slow __ip_local_out ip_push_pending_frames udp_send_skb udp_sendmsg __x64_sys_sendto Allocated by task 77: __alloc_skb (net/core/skbuff.c:704) __nft_obj_notify (include/net/netlink.h:1055 net/netfilter/nf_tables_api.c:8731) nft_quota_obj_eval (net/netfilter/nft_quota.c:68) nft_do_chain Freed by task 79: nf_tables_commit (include/linux/skbuff.h:1332 net/netfilter/nf_tables_api.c:10759 net/netfilter/nf_tables_api.c:11185) nfnetlink_rcv_batch (net/netfilter/nfnetlink.c:574) netlink_unicast netlink_sendmsg The buggy address belongs to the cache skbuff_head_cache of size 232 Queueing from the packet path is wrong even leaving the race aside: notify_list is only drained by nft_commit_notify() from nf_tables_commit() (:11185), so a notification enqueued outside a transaction is not sent until some later netlink batch commits, if one ever does. The gfp argument that nft_obj_notify() still takes is a leftover of the pre-67cc570edaa0 behaviour, where this path called nfnetlink_send() directly. Restore that: split the message construction out into nft_obj_notify_alloc() and let each caller decide what to do with the skb. nft_obj_notify(), the exported one reached from the packet path, sends it straight away; nf_tables_obj_notify(), which runs under commit_mutex, keeps queueing it, so transaction notifications are still coalesced. | ||||
| CVE-2026-80836 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: virtio - bound the akcipher result length virtio_crypto_dataq_akcipher_callback() sets the result length from the device-reported response length without bounding it to the destination buffer, which was allocated for the original request length. sg_copy_from_buffer() then reads that many bytes from the destination buffer; a backend reporting a larger length over-reads adjacent kernel heap into the caller's scatterlist (an out-of-bounds read). Clamp the reported length to the originally requested destination length. A conforming device reports no more than that, so valid results are unaffected. | ||||
| CVE-2026-80786 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: Wrap user-invoked calls to fb_set_var() in helper Handle fbcon during display updates in fb_set_var_from_user(). Check with fbcon if the mode change is possible, update hardware state and finally update fbcon. Update all callers. Only the FBIOPUT_VSCREENINFO ioctl currently does all steps. Other mode-changes callers in sysfs and driver code are missing fbcon-related steps. With the new helper, ps3fb and sh_mobile_lcdcfb no longer maintain fbcon state themselves. | ||||
| CVE-2026-80771 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: HID: nintendo: register input device after capabilities are set input_register_device() exposes the device to userspace immediately. In joycon_input_create() it was called before joycon_config_rumble() configures the FF_RUMBLE capability and the memless force-feedback device, so a concurrent EVIOCSFF could dereference a NULL dev->ff. Registering early also means the initial udev event lacks button and axis information, which can make input managers ignore the device. Move input_register_device() to the end of joycon_input_create(), after all capabilities, the IMU input device and the force-feedback callbacks have been configured. | ||||
| CVE-2026-80761 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: zero the sockaddr before returning it in getname iso_sock_getname() fills a struct sockaddr_iso in place and returns its size without clearing it first, so bytes it does not write are copied to user space from the kernel stack. The getsockname(2) and getpeername(2) paths both run through do_getsockname(), which hands getname() an uninitialized sockaddr_storage on the stack and copies back up to the number of bytes getname() returns, so the driver has to initialize every byte it accounts for. Two ranges are left uninitialized: - struct sockaddr_iso is 10 bytes but only 9 are written (family, iso_bdaddr, iso_bdaddr_type), leaking the trailing pad byte on every call. - for a broadcast peer (BIS_LINK or PA_LINK) the returned length grows by sizeof(struct sockaddr_iso_bc), but only bc_sid, bc_num_bis and bc_bis are filled; bc_bdaddr and bc_bdaddr_type, the first 7 bytes of that structure, are never written. An unprivileged process can open a BTPROTO_ISO socket and reach the pad leak with getsockname(); the broadcast leak needs an established BIS/PA connection. l2cap and rfcomm already memset their sockaddr in getname for the same reason; do the same here. | ||||
| CVE-2026-80755 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: selinux: reject a permission value exceeding the class permission count perm_read() bounds a permission value by SEL_VEC_MAX but never by the nprim of the owning class or common, which is taken verbatim from the policy image. security_get_permissions() then writes perms[value - 1] into an nprim-sized kcalloc() array, so a class declaring fewer permissions than its largest permission value drives an out-of-bounds heap write. The top-level symbol tables are validated this way; the nested per-class permission table is not. Reject a permission whose value exceeds nprim, which is already set when perm_read() runs. Well-formed policies are unaffected. [PM: tweak comment for line length] | ||||
| CVE-2026-80747 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Add bounds check for CRAT subtype length The CRAT parser validates that the subtype header fits within the image, but does not verify that the advertised subtype length fits. A malformed CRAT table with an oversized length field causes out-of-bounds reads when kfd_parse_subtype() casts the header to specific subtype structures. Add validation that sub_type_hdr + length does not exceed the image boundary before parsing the subtype contents. (cherry picked from commit 48e1d1e6e8798aef0312e68d8e586021b5b3cf4d) | ||||
| CVE-2026-80739 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: TC, Check if flow is PEER before acquiring devcom lock In case __mlx5e_add_fdb_flow() fails in lower levels, the flow is deleted via mlx5e_tc_del_flow(), and mlx5e_tc_del_flow() is acquiring ESW devcom lock without condition. In addition, in case of peer_flow, __mlx5e_add_fdb_flow() is called while holding ESW devcom comp lock. This results in an AA deadlock. To fix this, introduce a new PEER flag that is set on flows created as peer flows (the duplicate flows on peer devices), and check it in mlx5e_tc_del_flow() before acquiring ESW devcom lock. Lockdep splat: ============================================ WARNING: possible recursive locking detected ============================================ Possible unsafe locking scenario: CPU0 ---- lock(&comp->lock_key#2); lock(&comp->lock_key#2); *** DEADLOCK *** Call Trace: <TASK> dump_stack_lvl+0x69/0xa0 print_deadlock_bug.cold+0xbd/0xca __lock_acquire+0x1671/0x2ec0 lock_acquire+0x10e/0x2e0 down_read+0x95/0x430 mlx5_devcom_for_each_peer_begin+0x4e/0xe0 [mlx5_core] mlx5e_tc_del_flow+0x11d/0xa70 [mlx5_core] mlx5e_flow_put+0x99/0x100 [mlx5_core] __mlx5e_add_fdb_flow+0x409/0xf00 [mlx5_core] mlx5e_configure_flower+0x2a86/0x4100 [mlx5_core] mlx5e_rep_setup_tc_cls_flower+0x12f/0x1b0 [mlx5_core] mlx5e_rep_setup_tc_cb+0x153/0x750 [mlx5_core] tc_setup_cb_add+0x1dc/0x470 fl_change+0x2f4d/0x626d [cls_flower] tc_new_tfilter+0x79b/0x2310 rtnetlink_rcv_msg+0x778/0xad0 do_syscall_64+0x70/0x960 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> | ||||
| CVE-2026-80738 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Check sk_state before sk_protocol in bpf_tcp_*_syncookie bpf_tcp_gen_syncookie and bpf_tcp_check_syncookie accept a socket pointer 'sk' with argument type ARG_PTR_TO_BTF_ID_SOCK_COMMON. However, they access sk->sk_protocol without validating whether 'sk' represents a full socket. Fix this issue by checking sk->sk_state != TCP_LISTEN before inspecting sk->sk_protocol in both bpf_tcp_gen_syncookie and bpf_tcp_check_syncookie. Since mini-sockets are never in the TCP_LISTEN state, the condition short-circuits and prevents dereferencing fullsock-specific fields. | ||||
| CVE-2026-80710 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Fix undersized format-check buffer fmt_buffer_size in dasd_eckd_check_device_format() is declared as int, even though one of the multiplicands, sizeof(struct eckd_count), is a size_t. The expression trkcount * rpt_max * sizeof(struct eckd_count) is therefore correctly evaluated at 64-bit width, but the result is silently truncated when it is stored back into the 32-bit fmt_buffer_size variable. For a sufficiently large track range (start_unit/stop_unit are caller-controlled) this truncation yields a buffer size far smaller than the number of tracks actually requested. kzalloc() then succeeds with an undersized allocation, while the subsequent channel program build still operates on the untruncated track count and writes past the end of that buffer. Compute the buffer size with check_mul_overflow() and keep it in a size_t, so that a value that no longer fits results in -EINVAL instead of a silently truncated allocation size. | ||||
| CVE-2026-80698 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix double free of wq, engine, and group structs The release callbacks for wq, engine, and group devices (idxd_conf_wq_release, idxd_conf_engine_release, idxd_conf_group_release) each call kfree() on the enclosing struct. The setup error paths and cleanup functions also call kfree() explicitly after put_device(), producing a double free whenever put_device() drops the reference count to zero and fires the release. In the setup functions, device_initialize() is called before device_add(), so the reference count is exactly 1 at the error sites. put_device() unconditionally fires the release, which frees the struct; the subsequent explicit kfree() then operates on freed memory. For idxd_setup_wqs(), the wq release callback also owns opcap_bmap and wqcfg. The error unwind additionally freed those fields explicitly before calling put_device(), causing further double frees on both. Remove the redundant explicit kfree() calls from all setup error paths and cleanup functions for wq, engine, and group structs, delegating sole ownership of those allocations to the release callbacks. | ||||