Export limit exceeded: 109214 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (109214 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-53178 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: rtw_mlme: add bounds checks before ie_length subtraction Add guards to ensure ie_length is large enough before subtracting fixed IE offsets to prevent unsigned integer underflow. | ||||
| CVE-2026-53115 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bus: fsl-mc: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1] | ||||
| CVE-2026-53097 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix use-after-free bugs in mt7996_mac_dump_work() When the mt7996 pci chip is detaching, the mt7996_crash_data is released in mt7996_coredump_unregister(). However, the work item dump_work may still be running or pending, leading to UAF bugs when the already freed crash_data is dereferenced again in mt7996_mac_dump_work(). The race condition can occur as follows: CPU 0 (removal path) | CPU 1 (workqueue) mt7996_pci_remove() | mt7996_sys_recovery_set() mt7996_unregister_device() | mt7996_reset() mt7996_coredump_unregister() | queue_work() vfree(dev->coredump.crash_data) | mt7996_mac_dump_work() | crash_data-> // UAF Fix this by ensuring dump_work is properly canceled before the crash_data is deallocated. Add cancel_work_sync() in mt7996_unregister_device() to synchronize with any pending or executing dump work. | ||||
| CVE-2026-53091 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: net: pull headers in qdisc_pkt_len_segs_init() Most ndo_start_xmit() methods expects headers of gso packets to be already in skb->head. net/core/tso.c users are particularly at risk, because tso_build_hdr() does a memcpy(hdr, skb->data, hdr_len); qdisc_pkt_len_segs_init() already does a dissection of gso packets. Use pskb_may_pull() instead of skb_header_pointer() to make sure drivers do not have to reimplement this. Some malicious packets could be fed, detect them so that we can drop them sooner with a new SKB_DROP_REASON_SKB_BAD_GSO drop_reason. | ||||
| CVE-2026-52983 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net: airoha: fix BQL imbalance in TX path Fix a possible BQL imbalance in airoha_dev_xmit(), where inflight packets are accounted only for the AIROHA_NUM_TX_RING netdev TX queues. The queue index is computed as: qid = skb_get_queue_mapping(skb) % ARRAY_SIZE(qdma->q_tx) txq = netdev_get_tx_queue(dev, qid); However, airoha_qdma_tx_napi_poll() accounts completions across all netdev TX queues (num_tx_queues), leading to inconsistent BQL accounting. Also reset all netdev TX queues in the ndo_stop callback. | ||||
| CVE-2026-46076 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.9 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Raise #UD if unhandled VMMCALL isn't intercepted by L1 Explicitly synthesize a #UD for VMMCALL if L2 is active, L1 does NOT want to intercept VMMCALL, nested_svm_l2_tlb_flush_enabled() is true, and the hypercall is something other than one of the supported Hyper-V hypercalls. When all of the above conditions are met, KVM will intercept VMMCALL but never forward it to L1, i.e. will let L2 make hypercalls as if it were L1. The TLFS says a whole lot of nothing about this scenario, so go with the architectural behavior, which says that VMMCALL #UDs if it's not intercepted. Opportunistically do a 2-for-1 stub trade by stub-ifying the new API instead of the helpers it uses. The last remaining "single" stub will soon be dropped as well. [sean: rewrite changelog and comment, tag for stable, remove defunct stubs] | ||||
| CVE-2026-45956 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl() vidi_connection_ioctl() retrieves the driver_data from drm_dev->dev to obtain a struct vidi_context pointer. However, drm_dev->dev is the exynos-drm master device, and the driver_data contained therein is not the vidi component device, but a completely different device. This can lead to various bugs, ranging from null pointer dereferences and garbage value accesses to, in unlucky cases, out-of-bounds errors, use-after-free errors, and more. To resolve this issue, we need to store/delete the vidi device pointer in exynos_drm_private->vidi_dev during bind/unbind, and then read this exynos_drm_private->vidi_dev within ioctl() to obtain the correct struct vidi_context pointer. | ||||
| CVE-2026-45932 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix tcx/netkit detach permissions when prog fd isn't given This commit fixes a security issue where BPF_PROG_DETACH on tcx or netkit devices could be executed by any user when no program fd was provided, bypassing permission checks. The fix adds a capability check for CAP_NET_ADMIN or CAP_SYS_ADMIN in this case. | ||||
| CVE-2026-45861 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gfs2: Fix slab-use-after-free in qd_put Commit a475c5dd16e5 ("gfs2: Free quota data objects synchronously") started freeing quota data objects during filesystem shutdown instead of putting them back onto the LRU list, but it failed to remove these objects from the LRU list, causing LRU list corruption. This caused use-after-free when the shrinker (gfs2_qd_shrink_scan) tried to access already-freed objects on the LRU list. Fix this by removing qd objects from the LRU list before freeing them in qd_put(). Initial fix from Deepanshu Kartikey <kartikey406@gmail.com>. | ||||
| CVE-2026-43464 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: RX, Fix XDP multi-buf frag counting for legacy RQ XDP multi-buf programs can modify the layout of the XDP buffer when the program calls bpf_xdp_pull_data() or bpf_xdp_adjust_tail(). The referenced commit in the fixes tag corrected the assumption in the mlx5 driver that the XDP buffer layout doesn't change during a program execution. However, this fix introduced another issue: the dropped fragments still need to be counted on the driver side to avoid page fragment reference counting issues. Such issue can be observed with the test_xdp_native_adjst_tail_shrnk_data selftest when using a payload of 3600 and shrinking by 256 bytes (an upcoming selftest patch): the last fragment gets released by the XDP code but doesn't get tracked by the driver. This results in a negative pp_ref_count during page release and the following splat: WARNING: include/net/page_pool/helpers.h:297 at mlx5e_page_release_fragmented.isra.0+0x4a/0x50 [mlx5_core], CPU#12: ip/3137 Modules linked in: [...] CPU: 12 UID: 0 PID: 3137 Comm: ip Not tainted 6.19.0-rc3+ #12 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 RIP: 0010:mlx5e_page_release_fragmented.isra.0+0x4a/0x50 [mlx5_core] [...] Call Trace: <TASK> mlx5e_dealloc_rx_wqe+0xcb/0x1a0 [mlx5_core] mlx5e_free_rx_descs+0x7f/0x110 [mlx5_core] mlx5e_close_rq+0x50/0x60 [mlx5_core] mlx5e_close_queues+0x36/0x2c0 [mlx5_core] mlx5e_close_channel+0x1c/0x50 [mlx5_core] mlx5e_close_channels+0x45/0x80 [mlx5_core] mlx5e_safe_switch_params+0x1a5/0x230 [mlx5_core] mlx5e_change_mtu+0xf3/0x2f0 [mlx5_core] netif_set_mtu_ext+0xf1/0x230 do_setlink.isra.0+0x219/0x1180 rtnl_newlink+0x79f/0xb60 rtnetlink_rcv_msg+0x213/0x3a0 netlink_rcv_skb+0x48/0xf0 netlink_unicast+0x24a/0x350 netlink_sendmsg+0x1ee/0x410 __sock_sendmsg+0x38/0x60 ____sys_sendmsg+0x232/0x280 ___sys_sendmsg+0x78/0xb0 __sys_sendmsg+0x5f/0xb0 [...] do_syscall_64+0x57/0xc50 This patch fixes the issue by doing page frag counting on all the original XDP buffer fragments for all relevant XDP actions (XDP_TX , XDP_REDIRECT and XDP_PASS). This is basically reverting to the original counting before the commit in the fixes tag. As frag_page is still pointing to the original tail, the nr_frags parameter to xdp_update_skb_frags_info() needs to be calculated in a different way to reflect the new nr_frags. | ||||
| CVE-2026-89705 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: restore rq_status_counter to even on all nfsd_dispatch() exit paths nfsd_dispatch() sets rq_status_counter to an odd value once a request has been decoded, and back to an even value once it has been fully processed, forming a seq-lock like protocol with the lockless reader in nfsd_nl_rpc_status_get_dumpit(). Only the fully successful path restored the counter to even. The cache-hit (RC_REPLY), drop (RC_DROPIT / RQ_DROPME) and encode-error paths all return after the odd-valued store without ever bringing the counter back to even. Once one of those paths is taken, rq_status_counter is left odd: the next request's decode ORs in 1 (still odd) and only a subsequent successful encode restores even. While stuck odd, the dumpit reader treats the rqstp fields as stable and its retry check compares against the same unchanging odd value, so it never detects concurrent mutation. This exposes actively mutating fields (e.g. args->ops / args->opcnt during compound decode and release) to the lockless reader, which can read past the end of the 8-element inline ops array. Add a helper that advances the counter to the next even value and call it on every return path that follows the odd-valued store. The decode-error path is left untouched as it is reached before the counter is set odd. | ||||
| CVE-2026-89632 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-before-check of ReparseDataLength in reparse_buf_ptr() reparse_buf_ptr() reads buf->ReparseDataLength before checking that count covers the full fixed header: buf = (struct reparse_data_buffer *)((u8 *)io + off); len = sizeof(*buf); /* 8 bytes */ rdlen = le16_to_cpu(buf->ReparseDataLength); /* offset 4, 2 bytes */ if (count < len || count < rdlen + len) /* check comes after */ struct reparse_data_buffer has ReparseDataLength at offset 4. If a server returns OutputCount < 6, the read at offset 4-5 reaches past the end of the received data. The off+count bounds against iov_len were already validated, but that does not protect against count being smaller than sizeof(*buf). Split the check: verify count >= sizeof(*buf) before reading ReparseDataLength, then verify count covers the data region. | ||||
| CVE-2026-89624 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: universal-pidff: stop the device when force-feedback init fails universal_pidff_probe() starts the device with hid_hw_start() and then, if force-feedback initialisation fails, returns the error through a label that only does "return error". The device is left started. The HID core does not unwind on the driver's behalf. __hid_device_probe() releases the devres group, closes the report and clears hdev->driver: if (ret) { devres_release_group(&hdev->dev, hdev->devres_group_id); hid_close_report(hdev); hdev->driver = NULL; } The hidraw character device that hid_hw_start() registered through hid_connect() is allocated with kzalloc() and added with cdev_device_add(), so it is not devres-managed and survives that. With hdev->driver NULL, hid_device_remove() skips hid_hw_stop() as well, because it only unwinds while a driver is still attached. The registration therefore outlives the device on both paths. Opening the surviving /dev/hidrawX writes into freed memory. KASAN reports a use-after-free write from hidraw_open() -> hid_hw_open() -> the transport's open callback, which takes a spinlock inside the freed object. A descriptor that carries a PID usage page and no input reports is enough: hidraw claims the device so hid_hw_start() succeeds, while hid->inputs stays empty so force-feedback init fails. The other failure returns in hid_pidff_init_with_quirks() - no output reports, an allocation failure, pidff_init_fields(), pidff_check_autocenter(), an unusable effect count, input_ff_create() - all reach the same label. Stop the device on that path. hid-dr.c and hid-emsff.c, which start the device with the same HID_CONNECT_DEFAULT & ~HID_CONNECT_FF mask, already do this. The two earlier gotos must keep returning without hid_hw_stop(), since neither has a started device, so give the path that fails after the start its own label. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-89534 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Clear sc_cm_id when ADDR_CHANGE replacement fails When svc_rdma_listen_handler() handles RDMA_CM_EVENT_ADDR_CHANGE, it creates a replacement listener cm_id and returns 1, telling the CM core to destroy the old one. If the replacement allocation fails, sc_cm_id still points at the old cm_id that the CM core is about to destroy. Any subsequent dereference of sc_cm_id -- such as svc_rdma_detach()'s rdma_disconnect() call -- is a use-after-free. NULL sc_cm_id on the failure path and guard svc_rdma_detach()'s rdma_disconnect() call against NULL so that the listener can be torn down safely when the server shuts down. | ||||
| CVE-2026-80935 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: bound the device EEPROM address before the EFUSE copy mt7996_mcu_get_eeprom() derives the destination of the EFUSE/EXT block copy from the address reported by the MCU response (event->addr, a device-controlled __le32) and clamps only the copy length, never the destination offset into dev->mt76.eeprom.data. A malicious or malfunctioning device can report an arbitrary address and drive an out-of-bounds write of up to MT7996_EXT_EEPROM_BLOCK_SIZE bytes past eeprom.data. Reject a response whose address would place the copy outside eeprom.data before deriving the destination pointer. Devices that echo the requested in-bounds offset are unaffected. | ||||
| CVE-2026-80734 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: initialize inode mapping flags for cached inodes [BUG] When running generic/795 with 8K block size, 4K page size, the test always fails, triggering some ASSERT()s related to folio size: 795 (241074): drop_caches: 3 assertion failed: IS_ALIGNED(start, blocksize) && IS_ALIGNED(end + 1, blocksize), in extent_io.c:1404 (blocksize=8192 root=262 ino=258 start=16826368 end=16830463 mapping min order=0) ------------[ cut here ]------------ kernel BUG at extent_io.c:1404! Oops: invalid opcode: 0000 [#1] SMP CPU: 8 UID: 0 PID: 241105 Comm: fsstress Tainted: G OE 7.2.0-rc5-custom+ #442 PREEMPT(full) f4bfb352566f3949f29c233ce6f735050a03b245 Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022 RIP: 0010:assert_folio_range.cold+0x3d/0x3f [btrfs] Call Trace: <TASK> btrfs_read_folio+0x9e/0x170 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] prepare_one_folio.constprop.0+0x104/0x2a0 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] btrfs_buffered_write+0x285/0xa50 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] btrfs_do_write_iter+0x1aa/0x210 [btrfs 4cd1dd93b341b8ef766643f9512f4a86259567a3] iter_file_splice_write+0x31a/0x540 direct_splice_actor+0x53/0x170 splice_direct_to_actor+0xe9/0x240 do_splice_direct+0x76/0xb0 vfs_copy_file_range+0x1fd/0x630 __x64_sys_copy_file_range+0xf9/0x220 do_syscall_64+0xe1/0x790 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> ---[ end trace 0000000000000000 ]--- The ASSERT() itself is added by a later patch. The crash is triggered with that new debug patch, and without this fix. [CAUSE] In the above case, the start 16826368 is properly 8K aligned, but the end (16830463 + 1) is not 8K aligned. Furthermore the mapping's minimal folio order is 0, not the expected 1 for 8K block size with 4K page size. So this means some inodes do not have btrfs_set_inode_mapping_order() called on it. The missing btrfs_set_inode_mapping_order() call happens for cached inodes, through the following events: - btrfs_create_new_inode() called for inode X Which properly sets minimal folio order for the VFS inode. - btrfs_update_inode() called for inode X Which calls btrfs_delayed_update_inode() to create a delayed_node into root->delayed_nodes xarray. - Drop cache/memory pressure, evicting in-memory inode X Which evicted the inode X, but delayed_node is still in root->delayed_nodes for future reuse. - btrfs_iget() for inode X called again btrfs_iget() |- btrfs_iget_locked() | |- iget5_locked_rcu() | Which creates a new vfs_inode for btrfs, whose mapping still | has the minimal order as 0. | |- btrfs_read_locked_inode() |- btrfs_fill_inode() | |- btrfs_get_delayed_node() | Which found out the previous node, and use that delayed | node to initialize the new inode. | |- filled = true; |- if (filled) goto cache_index; Which skips the btrfs_update_inode_mapping_flags() and btrfs_set_inode_mapping_order() calls. So the inode still has minimal folio order set as 0, not the required 1. Thus later page cache read will get a folio whose size is smaller than block size, as the mapping has its minimal folio order set as 0 not 1, then trigger the ASSERT(). [FIX] Move the btrfs_update_inode_mapping_flags() and btrfs_set_inode_mapping_order() calls under cache_index label, so that the mapping flags and minimal folio order is always set no matter if we have a cached inode. | ||||
| CVE-2026-80692 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: hold conn in hci_connect_acl/le_sync() callbacks There is theoretical UAF if the conn is freed while the hci_sync task is running. Hold refcount to avoid that. | ||||
| CVE-2026-80662 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: cxl: Fix CXL_HEADERLOG_SIZE to match RAS Capability size The CXL r4.0 8.2.4.17.7 RAS Capability Structure has total length 0x58 bytes (CXL_RAS_CAPABILITY_LENGTH); the Header Log occupies the trailing 64 bytes at offset 0x18. CXL_HEADERLOG_SIZE was defined as SZ_512, eight times the actual on-device size. header_log_copy() reads CXL_HEADERLOG_SIZE_U32 (128) dwords from the RAS capability iomap, overrunning the 88-byte mapping by 448 bytes. The cxl_aer_uncorrectable_error trace event memcpy()s CXL_HEADERLOG_SIZE (512) bytes from its source. For the CPER caller the source is struct cxl_ras_capability_regs::header_log[16] (64 bytes) embedded in a stack-local cxl_cper_prot_err_work_data, so the memcpy reads 448 bytes of kernel stack into the trace event ring buffer where userspace can read it via tracefs. Set CXL_HEADERLOG_SIZE to 64 and derive CXL_HEADERLOG_SIZE_U32 from it, bringing all iomap readers into agreement on 16 dwords. Userspace tools such as rasdaemon have grown a dependency on the buggy 512-byte (128 u32) header_log layout in the cxl_aer_uncorrectable_error trace event. Add CXL_HEADERLOG_TRACE_SIZE_U32 = 128 and use it for the trace event __array and its memcpy to preserve that ABI. Both callers now pass a zero-filled u32[CXL_HEADERLOG_TRACE_SIZE_U32] staging buffer with only the first CXL_HEADERLOG_SIZE_U32 (16) entries populated from hardware; the remaining 112 u32s are zero-padded, keeping the 512-byte trace ring buffer layout intact. [ dj: Replaced 64 with SZ_64 per RichardC ] | ||||
| CVE-2026-43263 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Fix Null reference while testing fluster When multi instances are created/destroyed, many interrupts happens and structures for decoder are removed. "struct vpu_instance" this structure is shared for all flow in the decoder, so if the structure is not protected by lock, Null dereference could happens sometimes. IRQ Handler was spilt to two phases and Lock was added as well. | ||||
| CVE-2026-43199 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query Fix a "scheduling while atomic" bug in mlx5e_ipsec_init_macs() by replacing mlx5_query_mac_address() with ether_addr_copy() to get the local MAC address directly from netdev->dev_addr. The issue occurs because mlx5_query_mac_address() queries the hardware which involves mlx5_cmd_exec() that can sleep, but it is called from the mlx5e_ipsec_handle_event workqueue which runs in atomic context. The MAC address is already available in netdev->dev_addr, so no need to query hardware. This avoids the sleeping call and resolves the bug. Call trace: BUG: scheduling while atomic: kworker/u112:2/69344/0x00000200 __schedule+0x7ab/0xa20 schedule+0x1c/0xb0 schedule_timeout+0x6e/0xf0 __wait_for_common+0x91/0x1b0 cmd_exec+0xa85/0xff0 [mlx5_core] mlx5_cmd_exec+0x1f/0x50 [mlx5_core] mlx5_query_nic_vport_mac_address+0x7b/0xd0 [mlx5_core] mlx5_query_mac_address+0x19/0x30 [mlx5_core] mlx5e_ipsec_init_macs+0xc1/0x720 [mlx5_core] mlx5e_ipsec_build_accel_xfrm_attrs+0x422/0x670 [mlx5_core] mlx5e_ipsec_handle_event+0x2b9/0x460 [mlx5_core] process_one_work+0x178/0x2e0 worker_thread+0x2ea/0x430 | ||||