Export limit exceeded: 10447 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (10447 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93221 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: convert nfsd_net boolean flags to unsigned long flags word nfsd_net contains several boolean fields that are accessed from concurrent contexts without serialization. In particular, nfsd4_end_grace() guards its drain path with a plain bool: if (nn->grace_ended) return; nn->grace_ended = true; The read and the write are independent, and nothing in struct nfsd_net serializes them. At least two contexts can reach this code with no lock held: laundromat path laundry_wq kworker nfs4_laundromat() nfsd4_end_grace() RECLAIM_COMPLETE path nfsd compound kthread nfsd4_reclaim_complete() inc_reclaim_complete() nfsd4_end_grace() Both callers can observe grace_ended == false on different CPUs, both store true, and both proceed into nfsd4_record_grace_done(), which invokes the active client_tracking_ops->grace_done callback. For tracking ops that drain reclaim_str_hashtbl (legacy_tracking_ops via nfsd4_recdir_purge_old, and the cld v1+ ops via nfsd4_cld_grace_done), grace_done calls nfs4_release_reclaim(), which walks every bucket of reclaim_str_hashtbl with no lock and calls nfs4_remove_reclaim_record() (list_del + kfree) on each entry. Two concurrent walkers corrupt the list and double-free every nfs4_client_reclaim. A concurrent nfsd4_find_reclaim_client() iterating the same bucket reads through freed memory. A third call site exists in nfs4_state_start_net() on the skip_grace startup path, but it runs under nfsd_mutex before any client has connected and before the laundromat's first delayed work fires, so it cannot race with the two callers above. Replace the scattered boolean fields in nfsd_net with a single unsigned long flags word and an enum nfsd_net_flag for the bit positions. The grace_ended race is fixed by using test_and_set_bit(), which is atomic on all architectures. The remaining flags (grace_end_forced, in_grace, somebody_reclaimed, track_reclaim_completes, nfsd_net_up, lockd_up) are converted to use test_bit/set_bit/clear_bit for consistency. This avoids sub-word cmpxchg issues on architectures like Hexagon that only support word-sized atomic operations. | ||||
| CVE-2026-93205 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3: Manage teardown with devm arm_smmu_device_remove() manually frees the IOPF queue, destroys the vmid_map and disables the device, while the IRQs and queues are devm managed. devm unwinds only after remove() returns, so the cleanup runs in the wrong order. The IOPF queue is freed before the event-queue IRQ whose handler uses it. Manage all of it with devm so the unwind order is correct. Free the IOPF queue and vmid_map via devm actions, and disable the device from one registered after arm_smmu_device_reset(). This is also a prerequisite for fixing a Tegra241 CMDQV CMD_SYNC use-after-free in the subsequent patch. | ||||
| CVE-2026-93200 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: i3c: master: Fix use-after-free of master->this sysfs attribute callbacks for the master controller device dereference master->this. However, master->this is freed in i3c_master_detach_free_devs() before the master device itself is released. As a result, sysfs accesses can dereference a freed master->this pointer, leading to a use-after-free. Keep master->this alive until i3c_masterdev_release(), which is called after the master device and its sysfs state are being torn down. Do not free master->this as part of the normal device detach path. On the error path in i3c_master_set_info(), reset master->this and bus.cur_master to NULL before freeing the allocated device. | ||||
| CVE-2026-93196 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: nvdimm: virtio_pmem: refcount requests for token lifetime KASAN reports slab-use-after-free in __wake_up_common(): BUG: KASAN: slab-use-after-free in __wake_up_common+0x114/0x160 Read of size 8 at addr ffff88810fdcb710 by task swapper/0/0 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.19.0-next-20260220-00006-g1eae5f204ec3 #4 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x6d/0xb0 print_report+0x170/0x4e2 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? __virt_addr_valid+0x1dc/0x380 kasan_report+0xbc/0xf0 ? __wake_up_common+0x114/0x160 ? __wake_up_common+0x114/0x160 __wake_up_common+0x114/0x160 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 __wake_up+0x36/0x60 virtio_pmem_host_ack+0x11d/0x3b0 ? sched_balance_domains+0x29f/0xb00 ? __pfx_virtio_pmem_host_ack+0x10/0x10 ? _raw_spin_lock_irqsave+0x98/0x100 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 vring_interrupt+0x1c9/0x5e0 ? __pfx_vp_interrupt+0x10/0x10 vp_vring_interrupt+0x87/0x100 ? __pfx_vp_interrupt+0x10/0x10 __handle_irq_event_percpu+0x17f/0x550 ? __pfx__raw_spin_lock+0x10/0x10 handle_irq_event+0xab/0x1c0 handle_fasteoi_irq+0x276/0xae0 __common_interrupt+0x65/0x130 common_interrupt+0x78/0xa0 </IRQ> virtio_pmem_host_ack() wakes a request that has already been freed by the submitter. This happens when the request token is still reachable via the virtqueue, but virtio_pmem_flush() returns and frees it. Fix the token lifetime by refcounting struct virtio_pmem_request. virtio_pmem_flush() holds a submitter reference, and the virtqueue holds an extra reference once the request is queued. The completion path drops the virtqueue reference, and the submitter drops its reference before returning. | ||||
| CVE-2026-93192 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Clear queue->active_job when v3d_fence_create() fails The run_job() callbacks for BIN, RENDER, TFU and CSD assign the incoming job to queue->active_job before calling v3d_fence_create(). If v3d_fence_create() fails, the callback returns NULL without clearing active_job, leaving a dangling pointer. Create a failure path in all run_job() callbacks that clears the active job before returning NULL. The BIN path takes queue->queue_lock around the clear as it races against v3d_overflow_mem_work(); RENDER, TFU and CSD paths have no concurrent reader, so the clear is lock-free. | ||||
| CVE-2026-93176 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix dangling pointer in plane reset function amdgpu_dm_plane_drm_plane_reset() frees the old state before allocating a new one. If kzalloc() fails, the function returns without updating the state pointer, leaving a dangling pointer to already freed memory. Fix this by allocating the new state first. On allocation failure, the old state remains untouched and the function safely returns. Found by Linux Verification Center (linuxtesting.org) with SVACE. [adjust for movement around current amd-staging-drm-next] | ||||
| CVE-2026-93175 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix dangling pointer in CRTC reset function amdgpu_dm_crtc_reset_state() frees the old state before allocating a new one. If kzalloc() fails, the function returns without updating the state pointer, leaving a dangling pointer to already freed memory. Fix this by allocating the new state first. On allocation failure, the old state remains untouched and the function safely returns. Found by Linux Verification Center (linuxtesting.org) with SVACE. [adjust for movement around current amd-staging-drm-next] | ||||
| CVE-2026-93163 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: hwrng: core - fix rng list on registration error hwrng_register(rng) does the following: 1. Checks if rng has name and read methods set 2. Checks if the name already exists 3. Adds rng to global rng_list 4. May try to set rng to current_rng If step 4 fails, it returns an error. However, it does not remove the rng from rng_list, causing a dangling reference which can result in use-after-free if the caller frees rng, since registration failed. Add a list_del_init() cleanup step. | ||||
| CVE-2026-93105 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: esp: do not unref managed frag pages in esp_ssg_unref() esp_ssg_unref() releases the page references held on the source scatterlist after the AEAD operation completes. It calls skb_page_unref() on every frag page for an out-of-place transform (req->src != req->dst), and in the error path of esp_output_tail() (already_unref == true) on the request's own scatterlist. This is wrong when the skb carries managed frags (SKBFL_MANAGED_FRAG_REFS). Managed frags are owned by a zerocopy ubuf and the skb does not hold a per-frag page reference; io_uring SEND_ZC with a registered buffer attaches the bvec pages this way via io_sg_from_iter(). The rest of the stack honours this invariant: skb_release_data() skips the per-frag unref when SKBFL_MANAGED_FRAG_REFS is set, and skb_zcopy_managed() is the guard used at the other unref sites. esp_ssg_unref() is missing that guard, so for a managed-frag skb it drops a page reference the skb never acquired. This can underflow the page reference count and free a page that is still in use. Guard the function with skb_zcopy_managed() so both unref paths are skipped for managed-frag skbs, matching skb_release_data(). | ||||
| CVE-2026-93104 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rvt: Return NULL after port allocation failure rvt_alloc_device() deallocates the IB device when its port array cannot be allocated but then returns the pointer to the released allocation. Callers treat any non-NULL value as valid and dereference it, resulting in a use-after-free. Return NULL immediately after deallocation so callers can propagate the allocation failure. | ||||
| CVE-2026-93100 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/resctrl: Prevent use-after-free in rdtgroup_kn_put() A struct rdtgroup is reference counted via rdtgroup::waitcount. Callers that need the structure to remain valid across a sleep (while waiting on acquiring rdtgroup_mutex) take a reference with rdtgroup_kn_get() and release it with rdtgroup_kn_put(). The release path is intended to serve as the fallback freer: if the count drops to zero and the group has already been marked RDT_DELETED, rdtgroup_kn_put() frees the structure. The bulk teardown paths free_all_child_rdtgrp() and rmdir_all_sub() resulting from a resctrl directory remove or resctrl fs unmount act as the primary freer: they hold rdtgroup_mutex and free each rdtgroup whose waitcount is zero, otherwise they set RDT_DELETED and leave the freeing to the last waiter. These two freers race. rdtgroup_kn_put() commits waitcount == 0 with atomic_dec_and_test() outside rdtgroup_mutex, then reads rdtgroup::flags. Between those two operations a concurrent caller of free_all_child_rdtgrp() or rmdir_all_sub() (which holds the mutex) can observe waitcount == 0 via atomic_read(), call rdtgroup_remove(), and kfree() the structure. The subsequent read of rdtgroup::flags in rdtgroup_kn_put() is then a use-after-free, and the structure may even be freed twice if the freed memory happens to satisfy the RDT_DELETED flag check. Replace the bare atomic_dec_and_test() with atomic_dec_and_mutex_lock() so that the decrement-to-zero takes rdtgroup_mutex before the count becomes globally visible. The inspection of rdtgroup::flags then runs under the same mutex held by the bulk freers, making the two paths mutually exclusive. The common case where the count does not reach zero remains lock-free. Defer kernfs_unbreak_active_protection() until after the mutex is dropped since kernfs active protections functionally wrap rdtgroup_mutex. Remove resource group, which in turn drops its kernfs reference, after kernfs protection is restored. [ bp: Split the commit messsages into smaller, easier-parseable paragraphs. ] | ||||
| CVE-2026-93081 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scmi: Fix SCMI device destroy lifetimes scmi_child_dev_find() drops the reference returned by device_find_child() before returning the scmi_device pointer. A concurrent unregister can then release the device while the destroy path is still using the returned pointer. Make the lookup helper return the device_find_child() reference and keep it until scmi_device_destroy() has finished unregistering the child. Also split device_unregister() in __scmi_device_destroy() so the SCMI bus ID is not made reusable until after device_del() has removed the old scmi_dev.N name from sysfs. This avoids a new SCMI device reusing the same ID while the old device is still registered. The final device release callback is also a possible cleanup path when SCMI children are deleted by driver core recursion rather than __scmi_device_destroy(). Release the SCMI bus ID from a common helper used by destroy, register-failure and final-release paths, and clear scmi_dev->id after freeing it so the final release cannot free the same ID again. | ||||
| CVE-2026-93058 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: Only fini scheduler after successful init msm_ringbuffer_new() destroys a partially initialized ring through msm_ringbuffer_destroy() when an allocation or scheduler setup step fails. If drm_sched_init() fails before it finishes initializing the scheduler, the failure path still calls drm_sched_fini(). That teardown path assumes the scheduler work items, lists, and workqueue state were initialized. Track successful scheduler initialization and call drm_sched_fini() only after drm_sched_init() returned 0. This issue was found by a static analysis checker and confirmed by manual source review. Patchwork: https://patchwork.freedesktop.org/patch/738905/ | ||||
| CVE-2026-92482 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: mediatek: use devm_gpiochip_add_data() for GPIO chip The gpio_chip is allocated with device-managed memory but registered with the non-managed gpiochip_add_data(). This was harmless while the drivers were built-in, but once they can be built as modules and unbound/rmmod'd, devm frees the gpio_chip's memory while it is still registered, causing a use-after-free. Register it with devm_gpiochip_add_data() so it shares the same device-managed lifecycle, which also lets the manual gpiochip_remove() error paths go away. | ||||
| CVE-2026-90433 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: spi: oc-tiny: switch to managed controller allocation The controller is allocated with the non-managed spi_alloc_host() while the interrupt is registered with devm_request_irq(). During removal, spi_bitbang_stop() only unregisters the controller; the subsequent spi_controller_put() then frees the controller together with its embedded driver-private devdata, which is the IRQ handler's dev_id. The devm_request_irq() release action (free_irq()), which drains the handler, does not run until after .remove() returns. A late or latched interrupt can therefore reach tiny_spi_irq() and dereference already-freed memory (e.g. hw->base). Switch to devm_spi_alloc_host() so that the devres LIFO order releases the controller only after free_irq() has drained the handler, and drop the now-redundant spi_controller_put() from .remove(). The probe error path is simplified to direct returns. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-90427 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.4 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Don't fall back to a freed smmu after devm_krealloc() __tegra241_cmdqv_probe() uses devm_krealloc() to grow @smmu into the larger tegra241_cmdqv, which frees the original @smmu once it relocates. A failure after that returned NULL, and the caller then dereferenced the freed @smmu on its fallback path. Return an int and take @smmu by reference instead, then update *smmu to the reallocated pointer after devm_krealloc() succeeds, so the caller and its fallback path both use the live @smmu rather than the freed original. | ||||
| CVE-2026-90421 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: PCI: Fix UAF when probe runs concurrent to dyn ID removal Dynamic IDs are only guaranteed to be valid when dynids.lock is held, as remove_id_store() can free the node. Thus, make a copy in pci_match_device(). Also, clarify that the id parameter is only valid during probe. | ||||
| CVE-2026-90417 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/cxgb4: Fix dereg_skb leak and double free in write_tpt_entry() When the device is in the fatal error state, write_tpt_entry() returns -EIO before handing the caller's preallocated skb to the transmit path; its allocation-failure returns do the same. c4iw_dereg_mr() ignores the error and frees mhp, leaking mhp->dereg_skb. c4iw_get_dma_mr() instead frees the skb a second time after dereg_mem() already consumed it, a double free. Make write_tpt_entry() the sole owner of a non-NULL skb, freeing it on every return preceding handoff to c4iw_ofld_send(): fatal error, tpt and stag allocation failure. c4iw_ofld_send() consumes the skb on success and error alike, so drop the redundant kfree_skb() in c4iw_get_dma_mr() after dereg_mem(). | ||||
| CVE-2026-90368 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: unwind state on add_interface failure When mt76_wcid_alloc() fails, mt7915_add_interface() returned without clearing the vif_mask/omac_mask bits it had already set, without removing the firmware dev info added earlier, and without clearing a monitor_vif pointer to the vif mac80211 is about to free. mac80211 does not call remove_interface() for a failed add, so the indices and firmware dev entry leaked permanently and testmode could dereference the stale monitor_vif. Add a proper error unwind. | ||||
| CVE-2026-90365 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: cancel reset and rc work on device unregister Both drivers cancelled dump_work on unregister but left reset_work and rc_work to be flushed only by destroy_workqueue() in mt76_free_device(), which runs after the hw is unregistered and the hardware stopped. A reset_work that fires in that window calls ieee80211_restart_hw() and re-arms mac_work on an unregistered hw, and rc_work touches station state being torn down. Cancel both up front, alongside dump_work. | ||||