Export limit exceeded: 26033 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26033 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98632 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: mgmt: Dequeue pending mesh_send_sync entries on cancel In send_cancel(), pending mesh_tx objects are removed from the hdev->mesh_pending list and freed via mesh_send_complete(). However, if a mesh transmission was already queued onto hdev->cmd_sync_work_list via mesh_next(), the queued entry retains a raw pointer to mesh_tx. When hci_cmd_sync_work later processes the entry, it attempts to execute mesh_send_sync and its destroy callback mesh_send_start_complete using the already freed mesh_tx pointer, leading to a use-after-free. Fix this by invoking hci_cmd_sync_dequeue() for mesh_send_sync on the target mesh_tx before completing it. If the entry is found and dequeued, its destroy callback will complete and free the object; otherwise, mesh_send_complete() is called directly. Additionally, ensure the transmission queue advances after cancellation or errors. In mesh_send_start_complete(), call mesh_next() on error unless err is -ECANCELED, because hci_cmd_sync_dequeue() holds hdev->cmd_sync_work_lock and calling mesh_next() synchronously would deadlock. Instead, advance the queue in send_cancel() once the lock is released and if no transmission is in progress. | ||||
| CVE-2026-98647 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix divide-by-zero in btf_struct_walk() When an access goes past the struct and the last member is a flexible array, btf_struct_walk() folds the offset back into a single element with (off - moff) % t->size, but never checks that the element type has a size. BTF takes an empty struct, so this in program BTF /* event could be empty */ struct event { #ifdef HAVE_TIMESTAMP __u64 ts; #endif }; struct batch { int nr; struct event events[]; }; divides by zero at prog load time. Getting there needs a PTR_TO_BTF_ID that is not MEM_ALLOC, e.g. a plain read of a local kptr stashed in a map from a sleepable program. Oops: divide error: 0000 [#1] SMP KASAN PTI RIP: 0010:btf_struct_walk+0x53f/0x1570 Call Trace: <TASK> btf_struct_access+0x42a/0xcd0 check_ptr_to_btf_access+0x4dc/0x1160 check_mem_access+0x3a45/0x8740 check_load_mem+0x36a/0xd10 do_check_common+0x3ef0/0xb210 bpf_check+0x6d3b/0x8580 bpf_prog_load+0xf7c/0x2720 __sys_bpf+0xa83/0x3690 __x64_sys_bpf+0xc7/0x150 x64_sys_call+0x1f3f/0x27e0 do_syscall_64+0xe5/0x610 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> Reject a zero-sized element type. The fixed array path in the same function already bails out on the same thing: btf_struct_walk() ... /* skip empty array */ if (moff == mtrue_end) continue; msize /= total_nelems; | ||||
| CVE-2026-98649 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 5.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix race in _destroy_pages_crste() Use READ_ONCE() in _destroy_pages_crste() to read the crste, avoid dereferencing the pointer multiple times. | ||||
| CVE-2026-98652 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Add missing srcu in kvm_s390_set_irq_state() Like kvm_s390_inject_vcpu(), kvm_s390_set_irq_state() also needs the kvm->srcu or the slots lock when performing the Store status operation. Fix by taking kvm->srcu in kvm_s390_set_irq_state(). | ||||
| CVE-2026-98661 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: iio: light: rohm-bu27034: Fix infinite delay on error When reading an integration-time fails, the code will use error code to compute the sleep time. Fix this by using the smallest integration time as a default if reading fails. | ||||
| CVE-2026-98663 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: imu: adis16480: fix unprotected debugfs reads The firmware_revision and firmware_date file operations are open coded and never call debugfs_file_get(), which debugfs_create_file_unsafe() requires. debugfs_remove_recursive() therefore does not wait for a read in progress, and unbind frees the iio_dev underneath it. Use debugfs_create_file() instead. | ||||
| CVE-2026-98664 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: imu: adis16400: fix unprotected debugfs reads adis16400_serial_number_fops is open coded and never calls debugfs_file_get(), so debugfs_remove_recursive() does not wait for a read in progress and unbind frees the iio_dev underneath it. Commit ae1d37a9bb4b ("iio: imu: adis16400: use DEFINE_DEBUGFS_ATTRIBUTE instead of DEFINE_SIMPLE_ATTRIBUTE") converted product_id and flash_count to DEFINE_DEBUGFS_ATTRIBUTE, which protects itself, but moved all three files to debugfs_create_file_unsafe(). serial_number prints three registers as "%.4x-%.4x-%.4x" and DEFINE_DEBUGFS_ATTRIBUTE() formats a single u64, so it cannot be converted without changing what the file returns. adis16475 and adis16550 already use debugfs_create_file() for their open coded files. Use it here too. | ||||
| CVE-2026-98678 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad4030: fix invalid oversampling_ratio validation In ad4030_set_avg_frame_len(), the logarithm is calculated before input validation. Passing zero or negative values leads to an undefined result from ilog2(). Validate that the input is strictly positive prior to computing its logarithm. | ||||
| CVE-2026-98701 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: release mesh path quota on failed additions Repeated failed or duplicate mesh path additions can exhaust MESH_MAX_MPATHS while the path table holds fewer paths, which stops new paths to reachable destinations from being created. mesh_path_add() reserves a slot before allocating and inserting a path. If allocation fails, the function returns without releasing the slot. If the rhashtable insertion reports an error or an existing destination, the function discards its candidate but retains the reservation. No new path is installed in any of these cases. Release the reservation whenever the candidate is not installed. | ||||
| CVE-2026-98636 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: squashfs: Add dictionary size range check to prevent shift-out-of-bounds When an abnormal SquashFS image (COMP_OPTS flag is 1 but dictionary size is 0) is mounted, and performs shift operations using dictionarysize, the shift exponent is -1, causing a shift-out-of-bounds. Detail as below: squashfs_comp_opts(msblk, buffer, length) squashfs_xz_comp_opts() if (comp_opts) n = ffs(opts->dict_size) - 1;<----opts->dict_size=0, n=-1 if (opts->dict_size != (1 << n) && opts->dict_size != (1 << n) + (1 << (n + 1))) <----shift-out-of-bounds Fix it by adding a dictionary size range check before the shift operation. | ||||
| CVE-2026-98669 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: buffer: serialize buffer teardown with mode claims Buffer-mode claims hold mlock to guarantee that the device remains in buffer mode until the claim is released. Normal buffer updates take info_exist_lock followed by mlock in iio_update_buffers(). However, iio_device_unregister() disables and deactivates all buffers without taking mlock. This can invalidate buffer state, including active_scan_mask, while a buffer-mode claim is held. Take mlock in iio_disable_all_buffers() so that unregister honors the mode-claim lifetime guarantee. The info_exist_lock -> mlock ordering matches iio_update_buffers(). | ||||
| CVE-2026-98673 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: pac1934: check ACPI label duplication A label duplication failure currently reaches the terminating-byte write. Release the ACPI result and abort before accessing the missing label; earlier labels are managed by devres. Detected by static analysis and reviewed with AI-assisted source auditing. | ||||
| CVE-2026-98674 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: adi-axi-adc: Initialize state mutex The AXI ADC register access paths serialize transactions with st->lock, but probe does not initialize it. Initialize the mutex before registering the backend. | ||||
| CVE-2026-98679 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: iio: accel: kxcjk-1013: reject duplicate event disable The IIO core does not filter duplicate writes to the event enable attribute. kxcjk1013_write_event_config() already ignores repeated enable requests, but a repeated disable request still calls kxcjk1013_set_power_state(data, false), dropping a runtime PM reference that was not acquired for this request. This can underflow the runtime PM usage count and trigger a "Runtime PM usage count underflow" warning. Return early when the requested state already matches ev_enable_state. | ||||
| CVE-2026-98680 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 1.9 Low |
| In the Linux kernel, the following vulnerability has been resolved: iio: accel: kionix-kx022a: Prevent memory leak and fix state The driver allocates memory for samples at buffer enable path. If regmap operation fails in the kx022a_fifo_enable() at the buffer enable path, the allocated memory is never freed. Furthermore, the state information and previous hardware configuration(s) aren't undone, potentially leaving WMI interrupts and buffers enabled, or driver state flags wrong. Free the memory and revert the hardware configuration and state flags on error path. | ||||
| CVE-2026-98682 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: drain and invalidate before server-side copy/clone cifs_file_copychunk_range() and the clone (FICLONE) path of cifs_remap_file_range() do not serialise the destination page cache against the server-side copy the way the other server-side range operations (smb3_zero_range(), smb3_punch_hole(), smb3_collapse_range() and smb3_insert_range()) do. cifs_file_copychunk_range() invalidates the destination range with filemap_invalidate_inode(), which takes and drops the mapping's invalidate_lock internally, so the lock is no longer held when the copychunk ioctl is issued. It also never drains in-flight netfs I/O on the target. The clone path never takes the invalidate_lock at all (only i_rwsem), uses a bare truncate_inode_pages_range() and likewise does not drain outstanding I/O. As a result an asynchronous destination writeback can complete after the server-side copy/clone has run and reinstate stale data over the region just written by the server, corrupting the file. This is the same class of corruption as commit d7d2adcd022b ("smb/client: flush dirty data before punching a hole") and has been seen randomly in generic/363 against Windows Server. Fix both paths to follow the established ordering: hold the target mapping's invalidate_lock across the flush and invalidation of the destination and the server ioctl, and call netfs_wait_for_outstanding_io() on the target to drain in-flight writes before the ioctl is issued. Only the target inode's invalidate_lock is required, as the source is merely flushed and not invalidated; i_rwsem (already held via lock_two_nondirectories()) is acquired before the invalidate_lock, matching the VFS lock ordering. Since filemap_invalidate_inode() takes that same lock internally, replace it with its own unmap/flush/invalidate steps instead of calling it, and return early on a zero-length copy to avoid a range underflow. | ||||
| CVE-2026-98684 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: flush and commit data before querying allocated ranges The mode 0 / FALLOC_FL_KEEP_SIZE fallocate emulation for small interior ranges in smb3_simple_fallocate_range() issues FSCTL_QUERY_ALLOCATED_RANGES and zero-fills any sub-range the server reports as an unallocated hole, to force block allocation without changing file contents. This is unsafe against Windows servers. Per the Win32 documentation, FSCTL_QUERY_ALLOCATED_RANGES only reports ranges that *may* contain nonzero data and is explicitly not coherent with recently written data: "a call to FSCTL_QUERY_ALLOCATED_RANGES [after writing to a network file] would not necessarily return a correct list of allocated regions. To ensure coherency [...] flush the data to the file" fsx (generic/363) reproduces the resulting corruption against Windows Server 2022: a range is written, an uncached read returns the data, yet the next FSCTL_QUERY_ALLOCATED_RANGES on that range reports it as a whole hole, so the emulation overwrites live data with zeroes. A network trace confirmed the WRITE, the READ returning data and the query returning an empty range list within microseconds. Samba does not exhibit this; its query is coherent with the written data. Write back the dirty pages, drain any outstanding I/O and issue an SMB2 FLUSH to force the server to commit the data before querying the allocated ranges, so the query reflects the data actually present. With this, generic/363 passes against both Windows Server 2022 and Samba over 100000 fsx operations. | ||||
| CVE-2026-98686 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: discard post-EOF pagecache when extending a file via zero range smb3_zero_range() removed the pagecache only for the range being zeroed, so when it extends the file the folio straddling the old EOF - which may hold data dirtied past EOF through an mmap - was never dropped and became visible as file content once the file was extended. Lower the discard boundary to the smaller of the zero-range offset and the old EOF. | ||||
| CVE-2026-98687 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 6.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Reject oversized XDomain properties responses tb_xdp_properties_request() allocates room for 45 data dwords in its 252-byte response buffer. The XDomain length field is six bits wide, however, and a malicious peer can set it to 63. After the fixed response fields are subtracted, the driver treats this as 48 data dwords. Commit 322e93448d90 ("thunderbolt: Clamp XDomain response data copy to allocation size") only bounds the copy against data_len. If data_len is at least 48, memcpy() reads 192 bytes from the 180-byte res->data array, causing a 12-byte heap out-of-bounds read. Commit 4db2bd2ed478 ("thunderbolt: Limit XDomain response copy to actual frame size") limits the earlier copy but does not constrain this header-derived length. Reject response data lengths that exceed the allocated source buffer before copying them into the assembled property block. | ||||
| CVE-2026-98689 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: thunderbolt: Don't access a DP tunnel after its DPRX read was canceled tb_dp_dprx_work() checks ->dprx_canceled before it takes tb->lock so it misses a tb_dp_dprx_stop() that could not cancel the already running work. It then polls the DPRX capabilities and runs the callback for a tunnel that has already been torn down while the domain is suspending or going away. This can be hit by cancelling the DPRX read from outside the ordered tb->wq: During suspend tb_disconnect_and_release_dp() does just this and with a later patch tb_stop() will do it as well. The latter in combination with the Apple NHI where the DPRX read never completed is how I hit this. Check the flag with tb->lock held instead and check it again in tb_dp_tunnel_active() because the callback runs after the lock has been dropped again. Also clear the flag in tb_dp_dprx_start() so that it only ever describes the work that is currently in flight. | ||||