Export limit exceeded: 26069 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 416940 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 416940 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (416940 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-95664 | 1 Apache | 2 Apache Camel, Camel | 2026-10-28 | 5.4 Medium |
| Improper Neutralization of Special Elements used in an Expression Language Statement ('Expression Language Injection') vulnerability in Apache Camel AWS2-s3 component. This issue affects Apache Camel: from 4.8.0 before 4.18.5, from 4.19.0 before 4.22.2. For the object it uploads, reads or deletes, the camel-aws2-s3 producer takes the key from the CamelAwsS3Key message header and falls back to the keyName option configured on the endpoint only when that header is absent. Since 4.8.0, AWS2S3Utils.determineKey() also passed the resulting value to the Simple language whenever it contained ${ or $simple{, so that a route could use a dynamic key, and the evaluation applied to a value taken from the header as well as to the configured option. The header is not route configuration, however: the aws2-s3 consumer sets CamelAwsS3Key on the exchanges it creates to the key of the object it read, that is, the name of the object in the bucket. In a route that does nothing more than consume from one aws2-s3 endpoint and produce to another, the name of each consumed object therefore reached the producer, and a name containing either marker was evaluated as an expression, although the route author never asked for any evaluation, and configuring keyName on the producer did not prevent it, because the header took precedence. A key that a route copied into the header from other message content was evaluated in the same way. Anyone able to choose the name of an object in a bucket that such a route consumes, typically a principal allowed to upload to that bucket, could therefore have Simple expressions of their choosing evaluated in the Camel process. The Simple language can read JVM system properties, environment variables and configuration properties, which commonly carry credentials, and, where camel-bean is on the classpath, invoke methods on beans in the registry. The evaluated result became the key the producer used, so reading a value back additionally required the ability to see object names in the destination bucket, while a method invocation took effect without it; together with the need to name an object in a consumed bucket, this is why the severity is assessed medium. The bucket name went through the same evaluation, but the consumer only ever places the bucket configured on its own endpoint in a bucket header, never a value derived from a remote object, so the bucket name was not reachable in this way. Releases before 4.8.0 used the key from the header as given and are not affected. Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.8.x to 4.17.x and 4.19.x to 4.21.x release lines reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. After upgrading, a key or bucket name supplied through a message header is used literally, so a route that put an unevaluated Simple expression in the CamelAwsS3Key or CamelAwsS3OverrideBucketName header must evaluate it in the route instead, for example with setHeader and simple(), or configure it as the keyName or bucketName option of the endpoint. For deployments that cannot upgrade immediately, do not let a key derived from an object name or from other untrusted message content reach an aws2-s3 producer unchecked: in routes that pass exchanges from an aws2-s3 consumer to an aws2-s3 producer, either remove the CamelAwsS3Key header before the producer with removeHeader(“CamelAwsS3Key”), so that the keyName configured on the endpoint is used, or reject exchanges whose CamelAwsS3Key header contains ${ or $simple{. Configuring keyName alone is not a workaround, because the header takes precedence over it. As defence in depth, allow only trusted principals to write to buckets that Camel routes consume. | ||||
| CVE-2026-116689 | 1 Follow-redirects | 1 Follow Redirects | 2026-10-28 | 5.9 Medium |
| follow-redirects is a Node.js HTTP and HTTPS client wrapper that automatically follows redirects. From 1.16.0 until 1.16.2, the documented sensitiveHeaders option is checked with value instanceof Array, so an array created in another JavaScript realm is replaced with an empty list even though Array.isArray recognizes it. When a request then follows an attacker-controlled cross-origin redirect, a custom credential header named in that discarded list can be forwarded to the redirect destination. This issue is fixed in version 1.16.2. | ||||
| CVE-2026-114278 | 1 Eclipse | 1 Eclipse Che | 2026-10-28 | 9.8 Critical |
| The che-machine-exec service constructs a shell command by concatenating user-controlled input (the username and namespace fields from the /exec/init and /exec/config JSON endpoints) into a double-quoted sh -c "echo "..." > ..." invocation without any escaping. When che-machine-exec is run with authentication disabled (its default), any network-reachable attacker can achieve remote code execution in containers che-machine-exec is configured to access, via shell command substitution ($(...) or backticks). | ||||
| CVE-2026-117608 | 1 Assimp | 1 Assimp | 2026-10-28 | 6.1 Medium |
| Assimp through 6.0.5 contains an integer overflow vulnerability in MD2Importer::ValidateHeader() that allows attackers to bypass frame table bounds checks using crafted header fields. Attackers can supply a malicious .md2 file whose numFrames and numVertices values wrap the 32-bit size check, causing heap out-of-bounds reads that crash applications or expose adjacent heap memory. | ||||
| CVE-2026-110747 | 2026-10-28 | 7.5 High | ||
| ProtobufParser._readStringKey() reads the length prefix of a protobuf map entry's string key into an attacker-controlled int and then checks (_inputPtr + len) <= _inputEnd using signed arithmetic. For values near Integer.MAX_VALUE the addition overflows to a negative value and the check passes even when the input contains no key data. The parser then calls _finishShortText(len), which expands the text buffer to the declared length via TextBuffer.expandCurrentSegment and Arrays.copyOf, throwing OutOfMemoryError: Requested array size exceeds VM limit. An 8-byte malformed message containing a map entry with a declared key length of 0x7FFFFFFF is sufficient. Configured StreamReadConstraints, including maxStringLength, maxNameLength, maxDocumentLength and maxNestingDepth, do not prevent the failure. Applications running with -XX:+ExitOnOutOfMemoryError terminate the JVM. This is the same integer-overflow pattern addressed for other call sites in the remediation associated with CVE-2026-104016 and CVE-2026-104017; the map-key call site was corrected on the 3.x branches only, leaving the corresponding 2.x branches unguarded. Release lines 2.18, 2.19 and 2.20 do not contain _readStringKey() and are not affected by this vector. No privileges or user interaction beyond the ability to submit data for parsing are required. The 3.0 release line and 3.1.0-3.1.5 / 3.2.0-3.2.1 do not contain _readStringKey() and are therefore not affected; the method first appears in 3.1.6 and 3.2.2, mirroring its introduction at 2.21.6 on the 2.x side. | ||||
| CVE-2026-104016 | 2026-10-28 | 7.5 High | ||
| ProtobufParser parses length-prefixed protobuf string and bytes fields by checking (_inputPtr + len) <= _inputEnd and then, on the fast path, calling _finishShortText(len). Both use 32-bit signed integer arithmetic. When an attacker supplies a varint decoding to a length near Integer.MAX_VALUE, _inputPtr + len overflows to a negative value, the bounds check passes, and _finishShortText(len) reaches TextBuffer.expandCurrentSegment(len), which performs Arrays.copyOf with no cap and throws OutOfMemoryError: Requested array size exceeds VM limit. The JVM refuses arrays larger than Integer.MAX_VALUE - 8 before consulting available heap, so -Xmx tuning does not mitigate the issue. StreamReadConstraints.maxStringLength and maxDocumentLength do not gate this path: a 33-byte payload is far below any document-length cap and the string-length check does not fire before the allocation. This was confirmed empirically against shipping artifacts with maxStringLength, maxDocumentLength and maxNestingDepth all configured. A February 2026 hardening commit added the equivalent overflow guard to the packed-array-length and message-length paths but left the string-length call sites unguarded. No privileges or user interaction beyond the ability to submit data for parsing are required. | ||||
| CVE-2026-116684 | 1 Modelcontextprotocol | 1 Python-sdk | 2026-10-28 | 6.8 Medium |
| The Model Context Protocol Python SDK is the official Python SDK for Model Context Protocol servers and clients. From 1.10.0 until 1.30.0 and 2.2.0, server-side bearer authentication configured through AuthSettings with token_verifier accepts a valid token issued for another service when the authorization server serves multiple resources and the TokenVerifier does not independently validate the aud audience. This resource-confusion flaw lets a token holder authenticate to the wrong MCP server and exercise that token's resulting access. This issue is fixed in versions 1.30.0 and 2.2.0. | ||||
| CVE-2026-116678 | 1 Dani-garcia | 1 Vaultwarden | 2026-10-28 | 5.8 Medium |
| Vaultwarden is a Bitwarden-compatible server written in Rust. Prior to version 1.37.0, the Vaultwarden icon downloader validates the initial icon host and DNS results but passes favicon URLs parsed from attacker-controlled HTML to get_page_with_referer() without applying should_block_host() to the second-stage host. This flaw bypasses the remediation for CVE-2026-47160, which covered decimal, hexadecimal, octal, and IPv4-mapped IPv6 host normalization, because the second-stage IP-literal favicon fetch does not invoke the custom DNS resolver. A remote unauthenticated attacker can provide a public page whose favicon uses an IP-literal URL, allowing the Vaultwarden server to reach loopback or private and internal addresses. The issue affects instances with internal icon downloading enabled and can expose internal responses that resemble supported images or reveal reachability through timing, status, and cache behavior. This issue is fixed in version 1.37.0. | ||||
| CVE-2026-87394 | 1 Oracle | 1 Outside In Technology | 2026-10-28 | 8.2 High |
| Vulnerability in the Oracle Outside In Technology product of Oracle Fusion Middleware (component: Outside In Core). The supported version that is affected is 8.5.8. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Outside In Technology. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Outside In Technology accessible data and unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Outside In Technology. CVSS 3.1 Base Score 8.2 (Confidentiality and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:L). | ||||
| CVE-2026-87393 | 1 Oracle | 1 Outside In Technology | 2026-10-28 | 6.5 Medium |
| Vulnerability in the Oracle Outside In Technology product of Oracle Fusion Middleware (component: Outside In Core). The supported version that is affected is 8.5.8. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Outside In Technology. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of Oracle Outside In Technology. CVSS 3.1 Base Score 6.5 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:H). | ||||
| CVE-2026-87392 | 2 Oracle, Oracle Corporation | 3 Webcenter Content, Webcenter Content Imaging, Oracle Webcenter Content | 2026-10-28 | 6.5 Medium |
| Vulnerability in the WebCenter Content: Imaging product of Oracle Fusion Middleware (component: Core). The supported version that is affected is 14.1.2.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via SOAP to compromise WebCenter Content: Imaging. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all WebCenter Content: Imaging accessible data. CVSS 3.1 Base Score 6.5 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:H/A:N). | ||||
| CVE-2026-87388 | 1 Oracle | 1 Jd Edwards Enterpriseone Configurator | 2026-10-28 | 5.3 Medium |
| Vulnerability in the JD Edwards EnterpriseOne Configurator product of Oracle JD Edwards (component: Configuration Management). The supported version that is affected is 9.2. Difficult to exploit vulnerability allows low privileged attacker with network access via HTTP to compromise JD Edwards EnterpriseOne Configurator. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all JD Edwards EnterpriseOne Configurator accessible data. CVSS 3.1 Base Score 5.3 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:N/I:H/A:N). | ||||
| CVE-2026-87385 | 1 Oracle | 1 Jd Edwards Enterpriseone Human Resources Management | 2026-10-28 | 4.8 Medium |
| Vulnerability in the JD Edwards EnterpriseOne Human Resources Management product of Oracle JD Edwards (component: Human Resources). The supported version that is affected is 9.2. Difficult to exploit vulnerability allows unauthenticated attacker with network access via JDENET to compromise JD Edwards EnterpriseOne Human Resources Management. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of JD Edwards EnterpriseOne Human Resources Management accessible data as well as unauthorized read access to a subset of JD Edwards EnterpriseOne Human Resources Management accessible data. CVSS 3.1 Base Score 4.8 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:N). | ||||
| CVE-2026-87379 | 2 Oracle, Oracle Corporation | 3 Webcenter Content, Webcenter Content Imaging, Oracle Webcenter Content | 2026-10-28 | 4.3 Medium |
| Vulnerability in the WebCenter Content: Imaging product of Oracle Fusion Middleware (component: Core). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via SOAP to compromise WebCenter Content: Imaging. Successful attacks of this vulnerability can result in unauthorized read access to a subset of WebCenter Content: Imaging accessible data. CVSS 3.1 Base Score 4.3 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:N). | ||||
| CVE-2026-87377 | 2 Oracle, Oracle Corporation | 3 Webcenter Content, Webcenter Content Imaging, Oracle Webcenter Content | 2026-10-28 | 6.8 Medium |
| Vulnerability in the WebCenter Content: Imaging product of Oracle Fusion Middleware (component: Core). The supported version that is affected is 14.1.2.0.0. Difficult to exploit vulnerability allows low privileged attacker with network access via SOAP to compromise WebCenter Content: Imaging. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all WebCenter Content: Imaging accessible data as well as unauthorized access to critical data or complete access to all WebCenter Content: Imaging accessible data. CVSS 3.1 Base Score 6.8 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:N). | ||||
| CVE-2026-87373 | 2 Oracle, Oracle Corporation | 2 Webcenter Content, Oracle Webcenter Content | 2026-10-28 | 6.5 Medium |
| Vulnerability in the Oracle WebCenter Content product of Oracle Fusion Middleware (component: Content Server). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Difficult to exploit vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle WebCenter Content. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle WebCenter Content accessible data as well as unauthorized update, insert or delete access to some of Oracle WebCenter Content accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:L/A:N). | ||||
| CVE-2026-87367 | 1 Oracle | 4 Graalvm, Graalvm For Jdk, Java Se and 1 more | 2026-10-28 | 3.7 Low |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: JAXP). Supported versions that are affected are Oracle Java SE: 8u503, 8u503-perf, 11.0.32.1, 17.0.20.1, 21.0.12.1, 25.0.4.1, 27; Oracle GraalVM for JDK: 17.0.20.1 and 21.0.12.1; Oracle GraalVM Enterprise Edition: 21.3.19.1.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks of this vulnerability can result in unauthorized update, insert or delete access to some of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition accessible data. Note: This vulnerability can be exploited by using APIs in the specified Component, e.g., through a web service which supplies data to the APIs. This vulnerability also applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. CVSS 3.1 Base Score 3.7 (Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:N/I:L/A:N). | ||||
| CVE-2026-87366 | 1 Oracle | 1 Applications Framework | 2026-10-28 | 4.9 Medium |
| Vulnerability in the Oracle Applications Framework product of Oracle E-Business Suite (component: Web Utilities). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows high privileged attacker with network access via HTTP to compromise Oracle Applications Framework. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Applications Framework accessible data. CVSS 3.1 Base Score 4.9 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:H/UI:N/S:U/C:H/I:N/A:N). | ||||
| CVE-2026-87364 | 1 Oracle | 1 Service Bus | 2026-10-28 | 8.8 High |
| Vulnerability in the Oracle Service Bus product of Oracle Fusion Middleware (component: Core). Supported versions that are affected are 12.2.1.4.0 and 14.1.2.0.0. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Service Bus. Successful attacks of this vulnerability can result in takeover of Oracle Service Bus. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). | ||||
| CVE-2026-114091 | 1 Triggerdotdev | 1 Trigger.dev | 2026-10-28 | 5.3 Medium |
| Trigger.dev before 4.5.0 looks up runs by friendlyId alone in the api.v1.runs.$runParam.replay route without scoping the lookup to the caller's runtime environment. An attacker holding any tenant's API key who knows a victim's run friendlyId can replay that run into their own environment and read the victim's task payload. | ||||