Export limit exceeded: 413948 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 11627 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (11627 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63963 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: validate VDO count in Discover Identity ACK handlers Properly validate the count passed from a device when calling svdm_consume_identity() or svdm_consume_identity_sop_prime() as the device-controlled value could index off of the static arrays, which could leak data. | ||||
| CVE-2026-53330 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix out-of-bounds read in dp_get_eq_aux_rd_interval() [Why & How] The aux_rd_interval array in struct dc_lttpr_caps is declared with MAX_REPEATER_CNT - 1 (7) elements, indexed 0..6. However, the offset parameter passed to dp_get_eq_aux_rd_interval() can be as large as MAX_REPEATER_CNT (8) when a sink reports 8 LTTPR repeaters via DPCD. This leads to an out-of-bounds read of aux_rd_interval[7] when offset is 8. Fix this by growing aux_rd_interval to MAX_REPEATER_CNT elements to accommodate the full range of valid repeater counts defined by the DP spec. (cherry picked from commit a55a458a8df37a65ffda5cf721d554a8f74f6b04) | ||||
| CVE-2026-53224 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: sctp: validate embedded INIT chunk and address list lengths in cookie sctp_unpack_cookie() only checked that the embedded INIT chunk length did not exceed the remaining cookie payload, but did not ensure that the INIT chunk is large enough to contain a complete INIT header. A malformed COOKIE_ECHO can therefore carry a truncated INIT chunk whose length field is smaller than sizeof(struct sctp_init_chunk). Later, sctp_process_init() accesses INIT parameters unconditionally, which may lead to out-of-bounds reads. In addition, raw_addr_list_len is not fully validated against the remaining cookie payload. When cookie authentication is disabled, an attacker can supply an oversized raw_addr_list_len and cause sctp_raw_to_bind_addrs() to read beyond the end of the cookie. The address parser also lacks sufficient bounds checks for parameter headers and lengths, allowing malformed address parameters to trigger out-of-bounds reads. Fix this by: - requiring the embedded INIT chunk length to be at least sizeof(struct sctp_init_chunk); - validating that the INIT chunk and raw address list together fit within the cookie payload; - verifying sufficient data exists for each address parameter header and payload before parsing it. Note that sctp_verify_init() must be called after sctp_unpack_cookie() and before sctp_process_init() when cookie authentication is disabled. This will be addressed in a separate patch. | ||||
| CVE-2026-53179 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix buffer over-read in rtw_update_protection rtw_update_protection() is called with a pointer offset into the ies buffer but the full ie_length is passed, causing a potential buffer over-read. | ||||
| CVE-2026-52956 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential out-of-bounds access in __ceph_x_decrypt() In __ceph_x_decrypt(), a part of the buffer p is interpreted as a ceph_x_encrypt_header, and the magic field of this struct is accessed. This happens without any guarantee that the buffer is large enough to hold this struct. The function parameter ciphertext_len represents the length of the ciphertext to decrypt and is guaranteed to be at most the remaining size of the allocated buffer p. However, this value is not necessarily greater than sizeof(ceph_x_encrypt_header). E.g., a message frame of type FRAME_TAG_AUTH_REPLY_MORE, that is just as long to hold the ciphertext at its end with a ciphertext_len of 8 or less, can trigger an out-of-bounds memory access when accessing hdr->magic. This patch fixes the issue by adding a check to ensure that the decrypted plaintext in the buffer is large enough to represent at least the ceph_x_encrypt_header. | ||||
| CVE-2026-46130 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: dm-verity-fec: fix reading parity bytes split across blocks (take 3) fec_decode_bufs() assumes that the parity bytes of the first RS codeword it decodes are never split across parity blocks. This assumption is false. Consider v->fec->block_size == 4096 && v->fec->roots == 17 && fio->nbufs == 1, for example. In that case, each call to fec_decode_bufs() consumes v->fec->roots * (fio->nbufs << DM_VERITY_FEC_BUF_RS_BITS) = 272 parity bytes. Considering that the parity data for each message block starts on a block boundary, the byte alignment in the parity data will iterate through 272*i mod 4096 until the 3 parity blocks have been consumed. On the 16th call (i=15), the alignment will be 4080 bytes into the first block. Only 16 bytes remain in that block, but 17 parity bytes will be needed. The code reads out-of-bounds from the parity block buffer. Fortunately this doesn't normally happen, since it can occur only for certain non-default values of fec_roots *and* when the maximum number of buffers couldn't be allocated due to low memory. For example with block_size=4096 only the following cases are affected: fec_roots=17: nbufs in [1, 3, 5, 15] fec_roots=19: nbufs in [1, 229] fec_roots=21: nbufs in [1, 3, 5, 13, 15, 39, 65, 195] fec_roots=23: nbufs in [1, 89] Regardless, fix it by refactoring how the parity blocks are read. | ||||
| CVE-2026-45943 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: erofs: fix inline data read failure for ztailpacking pclusters Compressed folios for ztailpacking pclusters must be valid before adding these pclusters to I/O chains. Otherwise, z_erofs_decompress_pcluster() may assume they are already valid and then trigger a NULL pointer dereference. It is somewhat hard to reproduce because the inline data is in the same block as the tail of the compressed indexes, which are usually read just before. However, it may still happen if a fatal signal arrives while read_mapping_folio() is running, as shown below: erofs: (device dm-1): z_erofs_pcluster_begin: failed to get inline data -4 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 ... pc : z_erofs_decompress_queue+0x4c8/0xa14 lr : z_erofs_decompress_queue+0x160/0xa14 sp : ffffffc08b3eb3a0 x29: ffffffc08b3eb570 x28: ffffffc08b3eb418 x27: 0000000000001000 x26: ffffff8086ebdbb8 x25: ffffff8086ebdbb8 x24: 0000000000000001 x23: 0000000000000008 x22: 00000000fffffffb x21: dead000000000700 x20: 00000000000015e7 x19: ffffff808babb400 x18: ffffffc089edc098 x17: 00000000c006287d x16: 00000000c006287d x15: 0000000000000004 x14: ffffff80ba8f8000 x13: 0000000000000004 x12: 00000006589a77c9 x11: 0000000000000015 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000040 x4 : ffffffffffffffe0 x3 : 0000000000000020 x2 : 0000000000000008 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: z_erofs_decompress_queue+0x4c8/0xa14 z_erofs_runqueue+0x908/0x97c z_erofs_read_folio+0x128/0x228 filemap_read_folio+0x68/0x128 filemap_get_pages+0x44c/0x8b4 filemap_read+0x12c/0x5b8 generic_file_read_iter+0x4c/0x15c do_iter_readv_writev+0x188/0x1e0 vfs_iter_read+0xac/0x1a4 backing_file_read_iter+0x170/0x34c ovl_read_iter+0xf0/0x140 vfs_read+0x28c/0x344 ksys_read+0x80/0xf0 __arm64_sys_read+0x24/0x34 invoke_syscall+0x60/0x114 el0_svc_common+0x88/0xe4 do_el0_svc+0x24/0x30 el0_svc+0x40/0xa8 el0t_64_sync_handler+0x70/0xbc el0t_64_sync+0x1bc/0x1c0 Fix this by reading the inline data before allocating and adding the pclusters to the I/O chains. | ||||
| CVE-2026-45893 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: Fix & Optimize table creation from possibly unaligned memory Source blob may come from userspace and might be unaligned. Try to optize the copying process by avoiding unaligned memory accesses. - Added Fixes tag - Added "Fix &" to description as this doesn't just optimize but fixes a potential unaligned memory access [jj: remove duplicate word "convert" in comment trigger checkpatch warning] | ||||
| CVE-2026-89705 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: restore rq_status_counter to even on all nfsd_dispatch() exit paths nfsd_dispatch() sets rq_status_counter to an odd value once a request has been decoded, and back to an even value once it has been fully processed, forming a seq-lock like protocol with the lockless reader in nfsd_nl_rpc_status_get_dumpit(). Only the fully successful path restored the counter to even. The cache-hit (RC_REPLY), drop (RC_DROPIT / RQ_DROPME) and encode-error paths all return after the odd-valued store without ever bringing the counter back to even. Once one of those paths is taken, rq_status_counter is left odd: the next request's decode ORs in 1 (still odd) and only a subsequent successful encode restores even. While stuck odd, the dumpit reader treats the rqstp fields as stable and its retry check compares against the same unchanging odd value, so it never detects concurrent mutation. This exposes actively mutating fields (e.g. args->ops / args->opcnt during compound decode and release) to the lockless reader, which can read past the end of the 8-element inline ops array. Add a helper that advances the counter to the next even value and call it on every return path that follows the odd-valued store. The decode-error path is left untouched as it is reached before the counter is set odd. | ||||
| CVE-2026-89633 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix OOB read/write from unvalidated DataOffset in coalesce_t2() coalesce_t2() computes data pointers directly from server-supplied DataOffset fields with no validation against buffer bounds: data_area_of_tgt = (char *)&pSMBt->hdr.Protocol + get_unaligned_le16(&pSMBt->t2_rsp.DataOffset); data_area_of_src = (char *)&pSMBs->hdr.Protocol + get_unaligned_le16(&pSMBs->t2_rsp.DataOffset); data_area_of_tgt += total_in_tgt; ... memcpy(data_area_of_tgt, data_area_of_src, total_in_src); A small DataOffset can push a pointer below the actual byte area, overwriting header fields; a large one can push it past the buffer end, causing out-of-bounds heap reads (source) or writes (target). The BCC overflow guard does not prevent this: BCC reflects how much data is present, while DataOffset controls where in the buffer it starts. The "validate target area" comment present since the function was first written in 2005 was a placeholder that was never implemented. Add lower- and upper-bound checks for both data pointers before the memcpy, and before any target header fields are modified. | ||||
| CVE-2026-89632 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix use-before-check of ReparseDataLength in reparse_buf_ptr() reparse_buf_ptr() reads buf->ReparseDataLength before checking that count covers the full fixed header: buf = (struct reparse_data_buffer *)((u8 *)io + off); len = sizeof(*buf); /* 8 bytes */ rdlen = le16_to_cpu(buf->ReparseDataLength); /* offset 4, 2 bytes */ if (count < len || count < rdlen + len) /* check comes after */ struct reparse_data_buffer has ReparseDataLength at offset 4. If a server returns OutputCount < 6, the read at offset 4-5 reaches past the end of the received data. The off+count bounds against iov_len were already validated, but that does not protect against count being smaller than sizeof(*buf). Split the check: verify count >= sizeof(*buf) before reading ReparseDataLength, then verify count covers the data region. | ||||
| CVE-2026-89631 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reject a tree connect response whose byte count is too small CIFSTCon() bounds its strnlen() over the byte area with the server's ByteCount minus two, which for ByteCount 0 or 1 goes negative as an int and converts to a huge size_t. The later subtraction wraps the __u16 bytes_left, and that is what bounds cifs_strndup_from_utf16(): a bound of up to 65535 against a ~16 KB cifs_req_poolp object runs off the end of the slab object, and the bytes reach userspace through tcon->nativeFileSystem in /proc/fs/cifs/DebugData. Reject a byte area too small for what the parser consumes. Two bytes is the least it can consume, and no conformant response carries fewer. The new trace point is the 129th smb_eio_trace entry, which __mode(byte) cannot represent, so the attribute goes with it. | ||||
| CVE-2026-89574 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm array: validate array block headers on read array_block_check() validates blocknr and csum and nothing else, while node_check(), next to it, has bounded the structural fields since both were written. dm_array_cursor_next() takes its loop bound from the on-disk nr_entries and element_at() is unguarded pointer arithmetic, so a count larger than the block holds keeps the cursor in one block while the index grows past it and the read walks off the dm-bufio buffer -- dm_cache_load_mappings() drives it once per cache block at activation. Check the header against itself: reject a zero value_size, require max_entries to equal calc_max_entries() for that value_size and block size, and require nr_entries to fit. Equality rather than an upper bound, since a count below the real capacity trips BUG_ON() in fill_ablock() and trim_ablock(). Metadata dm-array writes satisfies all three. | ||||
| CVE-2026-89537 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Reject short RFC 4121 MIC tokens in gss_krb5_verify_mic_v2 gss_krb5_verify_mic_v2() reads the token ID at ptr[0..1], the flags byte at ptr[2], and padding at ptr[3..7], then passes ptr + GSS_KRB5_TOK_HDR_LEN and cksum_len to gss_krb5_mic_build_sg(). None of these accesses check read_token->len first. The minimum safe token size is GSS_KRB5_TOK_HDR_LEN (16) plus ctx->krb5e->cksum_len (12-24, depending on the enctype). All callers accept shorter tokens from the wire: - gss_unwrap_resp_integ() enforces only an upper bound (offset + len <= rcv_buf->len) before allocating mic.data = kmalloc(len) and passing it to gss_verify_mic(). A malicious NFS server can therefore supply a short checksum opaque, producing a small slab allocation that the Kerberos MIC verifier reads past. - gss_validate() enforces only len <= RPC_MAX_AUTH_SIZE (400) before passing the wire-supplied length to gss_validate_seqno_mic(), which constructs a mic xdr_netobj and calls gss_verify_mic(). - svcauth_gss_verify_header() enforces only checksum.len >= XDR_UNIT (4 bytes) before dispatching to gss_verify_mic(). - svcauth_gss_unwrap_integ() checks only that the checksum fits in gsd->gsd_scratch. Add a length guard at the top of gss_krb5_verify_mic_v2(), before any ptr[] access or scatterlist construction. Well-formed MIC tokens from gss_krb5_get_mic_v2() already have exactly GSS_KRB5_TOK_HDR_LEN + cksum_len bytes, so valid traffic is unaffected. | ||||
| CVE-2026-89526 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: svcrdma: Validate Read chunk positions before reconstruction The RPC/RDMA Read chunk position field is supplied by the remote client and stored verbatim in the parsed chunk list. xdr_count_read_segments() checks only 4-byte alignment; it never compares the position against the received inline body length. In the single-chunk path, svc_rdma_read_complete_one() splits the head and tail kvecs at ch_position. A position past the inline body underflows the tail length, exposing adjacent slab memory to the upper XDR decoder. In the multi-chunk path, svc_rdma_read_multiple_chunks() computes gap lengths between chunks as unsigned subtractions from ch_position. Overlapping Read chunks cause these subtractions to underflow. A final position past the inline body likewise underflows the trailing gap length. svc_rdma_copy_inline_range() then copies past the receive buffer into request pages that are returned to the client through the Reply channel. Bound inline-range copies in svc_rdma_copy_inline_range() against the decoded inline RPC body saved in rc_saved_arg. Reject a single Read chunk positioned beyond that body, and reject multi-chunk lists where accumulated read bytes exceed the next chunk's position. Apply the same position and overlap checks in the call-chunk interleaving path. | ||||
| CVE-2026-89492 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate directory-index entry counts when reading metadata ocfs2_validate_dx_leaf() and ocfs2_validate_dx_root() check the ECC and signature of an indexed-directory block before it reaches higher-level callers, but neither validator bounds the ocfs2_dx_entry_list counts against the capacity of the block that holds them. ocfs2_dx_dir_search() then walks for (i = 0; i < le16_to_cpu(entry_list->de_num_used); i++) dx_entry = &entry_list->de_entries[i]; over de_num_used entries with no bounds check. entry_list is either dx_leaf->dl_list (from ocfs2_read_dx_leaf) or, for an inline root, dx_root->dr_entries. A crafted on-disk image can set de_num_used (and de_count, which is the __counted_by_le() bound of de_entries) to 0xffff and make the walk read far past the end of the 4KB metadata block, giving a slab out-of-bounds read reachable from any path lookup, stat() or open() on an indexed directory once the image is mounted. Commit 775c17386a6f ("ocfs2: validate dx_root extent list fields during block read") already bounds dr_list for the non-inline dx_root, but left the inline dr_entries path and the dx_leaf dl_list unchecked. Add the same read-time validation for both entry lists: de_count must equal the capacity of the block (ocfs2_dx_entries_per_leaf()/per_root()) and de_num_used must not exceed de_count, rejecting corrupted metadata with -EFSCORRUPTED before ocfs2_dx_dir_search() can walk an out-of-range entry array. de_count is always written as exactly the block capacity when a leaf or inline root is formatted, so the equality check does not reject any valid image. Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-80747 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Add bounds check for CRAT subtype length The CRAT parser validates that the subtype header fits within the image, but does not verify that the advertised subtype length fits. A malformed CRAT table with an oversized length field causes out-of-bounds reads when kfd_parse_subtype() casts the header to specific subtype structures. Add validation that sub_type_hdr + length does not exceed the image boundary before parsing the subtype contents. (cherry picked from commit 48e1d1e6e8798aef0312e68d8e586021b5b3cf4d) | ||||
| CVE-2026-80662 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: cxl: Fix CXL_HEADERLOG_SIZE to match RAS Capability size The CXL r4.0 8.2.4.17.7 RAS Capability Structure has total length 0x58 bytes (CXL_RAS_CAPABILITY_LENGTH); the Header Log occupies the trailing 64 bytes at offset 0x18. CXL_HEADERLOG_SIZE was defined as SZ_512, eight times the actual on-device size. header_log_copy() reads CXL_HEADERLOG_SIZE_U32 (128) dwords from the RAS capability iomap, overrunning the 88-byte mapping by 448 bytes. The cxl_aer_uncorrectable_error trace event memcpy()s CXL_HEADERLOG_SIZE (512) bytes from its source. For the CPER caller the source is struct cxl_ras_capability_regs::header_log[16] (64 bytes) embedded in a stack-local cxl_cper_prot_err_work_data, so the memcpy reads 448 bytes of kernel stack into the trace event ring buffer where userspace can read it via tracefs. Set CXL_HEADERLOG_SIZE to 64 and derive CXL_HEADERLOG_SIZE_U32 from it, bringing all iomap readers into agreement on 16 dwords. Userspace tools such as rasdaemon have grown a dependency on the buggy 512-byte (128 u32) header_log layout in the cxl_aer_uncorrectable_error trace event. Add CXL_HEADERLOG_TRACE_SIZE_U32 = 128 and use it for the trace event __array and its memcpy to preserve that ABI. Both callers now pass a zero-filled u32[CXL_HEADERLOG_TRACE_SIZE_U32] staging buffer with only the first CXL_HEADERLOG_SIZE_U32 (16) entries populated from hardware; the remaining 112 u32s are zero-padded, keeping the 512-byte trace ring buffer layout intact. [ dj: Replaced 64 with SZ_64 per RichardC ] | ||||
| CVE-2026-80634 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: avoid num_encaps underflow on bridge VLAN untag The DEV_PATH_BR_VLAN_UNTAG case post-decrements info->num_encaps inside WARN_ON_ONCE(). num_encaps is u8, so if it's already 0 the decrement still happens and wraps it to 255. The break only leaves the inner switch -- a later path entry can set info->indev back to a real device, and we end up returning with num_encaps == 255. nft_dev_forward_path() then walks info.encap[] (size 2) up to num_encaps, which means an OOB stack read and a bogus count copied into the route descriptor. Should only happen on a malformed bridge path stack, hence the WARN, but worth handling sanely. Move the decrement out of the WARN. [ While at this, remove the WARN_ON_ONCE since this can only happen with a buggy bridge path stack --pablo ]. | ||||
| CVE-2026-43213 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: pci: validate sequence number of TX release report Hardware rarely reports abnormal sequence number in TX release report, which will access out-of-bounds of wd_ring->pages array, causing NULL pointer dereference. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 1 PID: 1085 Comm: irq/129-rtw89_p Tainted: G S U 6.1.145-17510-g2f3369c91536 #1 (HASH:69e8 1) Call Trace: <IRQ> rtw89_pci_release_tx+0x18f/0x300 [rtw89_pci (HASH:4c83 2)] rtw89_pci_napi_poll+0xc2/0x190 [rtw89_pci (HASH:4c83 2)] net_rx_action+0xfc/0x460 net/core/dev.c:6578 net/core/dev.c:6645 net/core/dev.c:6759 handle_softirqs+0xbe/0x290 kernel/softirq.c:601 ? rtw89_pci_interrupt_threadfn+0xc5/0x350 [rtw89_pci (HASH:4c83 2)] __local_bh_enable_ip+0xeb/0x120 kernel/softirq.c:499 kernel/softirq.c:423 </IRQ> <TASK> rtw89_pci_interrupt_threadfn+0xf8/0x350 [rtw89_pci (HASH:4c83 2)] ? irq_thread+0xa7/0x340 kernel/irq/manage.c:0 irq_thread+0x177/0x340 kernel/irq/manage.c:1205 kernel/irq/manage.c:1314 ? thaw_kernel_threads+0xb0/0xb0 kernel/irq/manage.c:1202 ? irq_forced_thread_fn+0x80/0x80 kernel/irq/manage.c:1220 kthread+0xea/0x110 kernel/kthread.c:376 ? synchronize_irq+0x1a0/0x1a0 kernel/irq/manage.c:1287 ? kthread_associate_blkcg+0x80/0x80 kernel/kthread.c:331 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295 </TASK> To prevent crash, validate rpp_info.seq before using. | ||||