| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| AMI APTIOV contains vulnerabilities
in BIOS where users may cause “Buffer Access with Incorrect Length
Value” by local access. Successful exploitation of this vulnerability could
lead to buffer overflows, memory corruption, and arbitrary code execution, and
also impact Confidentiality, Integrity, and Availability. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Validate CHAP_R length before base64 decode
chap_server_compute_hash() allocates client_digest as
kzalloc(chap->digest_size) and then, for BASE64-encoded responses,
passes chap_r directly to chap_base64_decode() without checking whether
the input length could produce more than digest_size bytes of output.
chap_base64_decode() writes to the destination unconditionally as long
as there is input to consume. With MAX_RESPONSE_LENGTH set to 128 and
the "0b" prefix stripped by extract_param(), up to 127 base64 characters
can reach the decoder. 127 characters decode to 95 bytes. For SHA-256
(digest_size=32) this overflows client_digest by 63 bytes; for MD5
(digest_size=16) the overflow is 79 bytes.
The length check at line 344 fires after the write has already happened.
The HEX branch in the same switch statement already validates the length
up front. Apply the same approach to the BASE64 branch: strip trailing
base64 padding characters, then reject any input whose data length
exceeds DIV_ROUND_UP(digest_size * 4, 3) before calling the decoder.
Stripping trailing '=' before the comparison handles both padded and
unpadded encodings. chap_base64_decode() already returns early on '=',
so the full original string is still passed to the decoder unchanged.
The mutual CHAP path decodes CHAP_C into initiatorchg_binhex, which is
kzalloc(CHAP_CHALLENGE_STR_LEN). extract_param() caps initiatorchg at
CHAP_CHALLENGE_STR_LEN characters, so at most CHAP_CHALLENGE_STR_LEN-1
base64 characters reach the decoder. The maximum decoded size,
DIV_ROUND_UP((CHAP_CHALLENGE_STR_LEN-1) * 3, 4), is less than
CHAP_CHALLENGE_STR_LEN, so no overflow is possible there. A comment is
added at the call site to document this. |
| Multiple Cisco products are affected by a vulnerability in the Snort 3 SMTP MIME Decoder that could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart.
This vulnerability is due to a lack of error checking when the MIME fields of the SMTP header are parsed. An attacker could exploit this vulnerability by sending crafted SMTP packets through an established connection to be parsed by Snort 3. A successful exploit could allow the attacker to cause a denial of service (DoS) condition when the Snort 3 Detection Engine unexpectedly restarts. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: validate cookie AUTH state before use
When cookie authentication is disabled, COOKIE_ECHO restores fixed-size
AUTH fields directly from peer-controlled cookie bytes. A forged RANDOM
length, HMAC list, or CHUNKS list can then reach association consumers
with lengths or identifiers that were never validated against the local
backing arrays.
A forged RANDOM length can cause out-of-bounds reads during key-vector
construction. A forged HMAC identifier also caused a 32-byte write past
a zero-length AUTH chunk, providing a primitive for a local privilege
escalation chain.
Validate the cookie's RANDOM, HMACS, and CHUNKS parameters at the cookie
trust boundary before copying them into the association. Reject invalid
types, malformed lengths, unsupported HMAC identifiers, HMAC lists
without SHA1, and forbidden chunk ids. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Disable EOP for TPA on all chips to prevent data corruption
EOP (End of frame padding) on the AGG ring may cause overlapping of
zero padding at the end of one segment with the next segment's data.
If Relaxed Ordering (RO) is enabled, the zero padding may overwrite
valid data in the next segment and corrupt the data. Older chips
(P5 and older) do not automatically disable RO when EOP is enabled.
On some ARM systems, data corruption was reported on 57508 (P5)
chips with RO enabled.
Always disable EOP on all chips on the AGG rings when TPA is enabled
to fix the data corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Add a max slot check for SQ
The variable WQE mode must be validated against
the maximum slots supported by HW. The max supported
value is 64K. Adding a max and min check and fail if user
supplied value is more than the max supported and zero. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix zeropoint update where i_size > remote_i_size
Fix the update of the zero point[*] by netfs_release_folio() when there is
uncommitted data in the pagecache beyond the folio being released but the
on-server EOF is in this folio (ie. i_size > remote_i_size). The update
needs to limit zero_point to remote_i_size, not i_size as i_size is a local
phenomenon reflecting updates made locally to the pagecache, not stuff
written to the server. remote_i_size tracks the server's i_size.
[*] The zero point is the file position from which we can assume that the
server will just return zeros, so we can avoid generating reads.
Note that netfs_invalidate_folio() probably doesn't need fixing as
zero_point should be updated by setattr after truncation or fallocate.
Found with:
fsx -q -N 1000000 -p 10000 -o 128000 -l 600000 \
/xfstest.test/junk --replay-ops=junk.fsxops
using the following as junk.fsxops:
truncate 0x0 0x1bbae 0x82864
write 0x3ef2e 0xf9c8 0x1bbae
write 0x67e05 0xcb5a 0x4e8f6
mapread 0x57781 0x85b6 0x7495f
copy_range 0x5d3d 0x10329 0x54fac 0x7495f
write 0x64710 0x1c2b 0x7495f
mapread 0x64000 0x1000 0x7495f
on cifs with the default cache option.
It shows read-gaps on folio 0x64 failing with a short read (ie. it hits
EOF) if the FMODE_READ check is commented out in netfs_perform_write():
if (//(file->f_mode & FMODE_READ) ||
netfs_is_cache_enabled(ctx)) {
and no fscache. This was initially found with the generic/522 xfstest. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: validate embedded INIT chunk and address list lengths in cookie
sctp_unpack_cookie() only checked that the embedded INIT chunk length
did not exceed the remaining cookie payload, but did not ensure that the
INIT chunk is large enough to contain a complete INIT header.
A malformed COOKIE_ECHO can therefore carry a truncated INIT chunk whose
length field is smaller than sizeof(struct sctp_init_chunk). Later,
sctp_process_init() accesses INIT parameters unconditionally, which may
lead to out-of-bounds reads.
In addition, raw_addr_list_len is not fully validated against the
remaining cookie payload. When cookie authentication is disabled, an
attacker can supply an oversized raw_addr_list_len and cause
sctp_raw_to_bind_addrs() to read beyond the end of the cookie. The
address parser also lacks sufficient bounds checks for parameter headers
and lengths, allowing malformed address parameters to trigger
out-of-bounds reads.
Fix this by:
- requiring the embedded INIT chunk length to be at least sizeof(struct
sctp_init_chunk);
- validating that the INIT chunk and raw address list together fit
within the cookie payload;
- verifying sufficient data exists for each address parameter header and
payload before parsing it.
Note that sctp_verify_init() must be called after sctp_unpack_cookie()
and before sctp_process_init() when cookie authentication is disabled.
This will be addressed in a separate patch. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix oops when split header is enabled
For GMAC4, when split header is enabled, in some rare cases, the
hardware does not fill buf2 of the first descriptor with payload.
Thus we cannot assume buf2 is always fully filled if it is not
the last descriptor. Otherwise, the length of buf2 of the second
descriptor will be calculated wrong and cause an oops:
Unable to handle kernel paging request at virtual address ffff00019246bfc0
...
x2 : 0000000000000040 x1 : ffff00019246bfc0 x0 : ffff00009246c000
Call trace:
dcache_inval_poc+0x28/0x58 (P)
dma_direct_sync_single_for_cpu+0x38/0x6c
__dma_sync_single_for_cpu+0x34/0x6c
stmmac_napi_poll_rx+0x8f0/0xb60
__napi_poll.constprop.0+0x30/0x144
net_rx_action+0x160/0x274
handle_softirqs+0x1b8/0x1fc
...
To fix this, the PL bit-field in RDES3 register is used for all
descriptors, whether it is the last descriptor or not. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: fix out-of-bounds access in read_block_state()
read_block_state() calculates nr_pages before taking dev_lock. If the
device is reset and reinitialized with a smaller disksize before lock
acquisition, nr_pages still describes the old table. The subsequent loop
can then call slot_lock() past the end of the newly allocated table.
Read disksize after acquiring dev_lock and checking that the device is
initialized. The read lock then keeps the table and its bound stable for
the duration of the scan. |
| In the Linux kernel, the following vulnerability has been resolved:
iavf: fix out-of-bounds writes in iavf_get_ethtool_stats()
iavf incorrectly uses real_num_tx_queues for ETH_SS_STATS. Since the
value could change in runtime, we should use num_tx_queues instead.
Moreover iavf_get_ethtool_stats() uses num_active_queues while
iavf_get_sset_count() and iavf_get_stat_strings() use
real_num_tx_queues, which triggers out-of-bounds writes when we do
"ethtool -L" and "ethtool -S" simultaneously [1].
For example when we change channels from 1 to 8, Thread 3 could be
scheduled before Thread 2, and out-of-bounds writes could be triggered
in Thread 3:
Thread 1 (ethtool -L) Thread 2 (work) Thread 3 (ethtool -S)
iavf_set_channels()
...
iavf_alloc_queues()
-> num_active_queues = 8
iavf_schedule_finish_config()
iavf_get_sset_count()
real_num_tx_queues: 1
-> buffer for 1 queue
iavf_get_ethtool_stats()
num_active_queues: 8
-> out-of-bounds!
iavf_finish_config()
-> real_num_tx_queues = 8
Use immutable num_tx_queues in all related functions to avoid the issue.
[1]
BUG: KASAN: vmalloc-out-of-bounds in iavf_add_one_ethtool_stat+0x200/0x270
Write of size 8 at addr ffffc900031c9080 by task ethtool/5800
CPU: 1 UID: 0 PID: 5800 Comm: ethtool Not tainted 6.19.0-enjuk-08403-g8137e3db7f1c #241 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x6f/0xb0
print_report+0x170/0x4f3
kasan_report+0xe1/0x180
iavf_add_one_ethtool_stat+0x200/0x270
iavf_get_ethtool_stats+0x14c/0x2e0
__dev_ethtool+0x3d0c/0x5830
dev_ethtool+0x12d/0x270
dev_ioctl+0x53c/0xe30
sock_do_ioctl+0x1a9/0x270
sock_ioctl+0x3d4/0x5e0
__x64_sys_ioctl+0x137/0x1c0
do_syscall_64+0xf3/0x690
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f7da0e6e36d
...
</TASK>
The buggy address belongs to a 1-page vmalloc region starting at 0xffffc900031c9000 allocated at __dev_ethtool+0x3cc9/0x5830
The buggy address belongs to the physical page: page: refcount:1 mapcount:0 mapping:0000000000000000
index:0xffff88813a013de0 pfn:0x13a013
flags: 0x200000000000000(node=0|zone=2)
raw: 0200000000000000 0000000000000000 dead000000000122 0000000000000000
raw: ffff88813a013de0 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffffc900031c8f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc900031c9000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffffc900031c9080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
ffffc900031c9100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
ffffc900031c9180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 |
| Vyper before 0.2.9 deploys forwarder proxies through the built-in create_forwarder_to function that report a fixed 4096-byte RETURNDATASIZE rather than the actual return data size. Calls through these proxies can yield corrupted data when a function returns more than 4096 bytes without return data sanitation, and fail strict return-size checks such as SafeERC20.safeTransfer. |
| In the Linux kernel, the following vulnerability has been resolved:
espintcp: use sk_msg_free_partial to fix partial send
sk_msg_free_partial() ensures consistency of the skmsg at every
iteration, without having to manually handle uncharges and offsets.
This simplifies the code, and fixes some bugs in skmsg accounting when
we don't send the full contents. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: cyw: fix heap overflow on a short auth frame
brcmf_notify_auth_frame_rx() takes the frame length from the firmware
event and copies the frame body with the management header offset
subtracted:
u32 mgmt_frame_len = e->datalen - sizeof(struct brcmf_rx_mgmt_data);
...
memcpy(&mgmt_frame->u, frame,
mgmt_frame_len - offsetof(struct ieee80211_mgmt, u));
The only length check is e->datalen >= sizeof(*rxframe), so mgmt_frame_len
can be anything from 0 up. offsetof(struct ieee80211_mgmt, u) is 24. When
mgmt_frame_len is below that, the subtraction wraps as an unsigned value to
a huge length. The memcpy then runs far past the kzalloc'd buffer. A
malicious or malfunctioning AP can make the frame short during the
external SAE auth exchange, so this is a remotely triggered heap overflow.
Reject frames shorter than the management header offset before the copy. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btrtl: validate firmware patch bounds
rtlbt_parse_firmware() copies patch_length - 4 bytes before appending the
firmware version. A malformed firmware patch shorter than the version field
can make this subtraction underflow and turn the copy into an oversized
read and write during Bluetooth setup.
The existing patch_offset + patch_length check can also wrap on 32-bit
architectures. Validate the patch length and range without arithmetic
overflow before allocating or copying the patch. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Validate length for CCA ECC private key requests
cca_ecc2protkey() derives the copy length for the CPRB parameter
block directly from the length field in the key token. Reject the
request early if the token length exceeds the available space in the
parameter block. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: Validate vmw_surface_metadata::array_size
This field comes from userspace and should be validated against specific
limits depending on which Shader Model (SM) is available. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath6kl: fix OOB read from firmware IE lengths in connect event
The firmware-controlled beacon_ie_len, assoc_req_len, and assoc_resp_len
fields in ath6kl_wmi_connect_event_rx() are not validated against the
buffer length. Their sum (up to 765) can exceed the actual WMI event
data, causing out-of-bounds reads during IE parsing and state corruption
of wmi->is_wmm_enabled.
Add a check that the total IE length fits within the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: validate DFS referral PathConsumed
parse_dfs_referrals() validates that the response contains the fixed
referral entry array and, on for-next, the per-referral string offsets.
However, the response also contains a PathConsumed value that is later
used for DFS path parsing.
If a malformed response provides a PathConsumed value larger than the
search name, later DFS parsing can advance beyond the end of the path.
Validate PathConsumed against the search name length before storing it in
the parsed referral. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pkey: Check length in PKEY_VERIFYPROTK ioctl
Explicitly check the buffer length request structure provided by
user-space and fail, if it exceeds the buffer size. |
