| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Golang Chi web framework, the ClientIPFromXFF middleware skips any X-Forwarded-For entry in a configured trusted CIDR but never verifies that the direct TCP peer in http.Request.RemoteAddr belongs to that CIDR. A client that can reach the Go server directly can therefore append a trusted-looking proxy address and choose the client IP returned by middleware.GetClientIP.
This issue affects chi before 5.4.0. |
| Use of a less trusted source for the envelope sender in the external-account download of Progressive Robot hMailServer 6.0.0 through 6.3.6 allows a remote unauthenticated attacker to have mail they write in the name of a domain the server hosts sent on by the server with an envelope sender at that domain, so that it passes the domain's SPF and DMARC at other receivers. A message the server downloads from an external POP3 or IMAP account has no SMTP envelope of its own, and the server took the address in its From header as its envelope sender, whatever that address was. A forward or redirect of the downloaded message to an outside address then left with that address as its envelope sender, which the Sender Rewriting Scheme leaves alone for a hosted domain, so that the receiver's SPF check passed for the forged domain, aligned even under strict alignment, with no non-default setting, host name record or DMARC policy needed. An attacker needs to know a mailbox elsewhere that an account here collects and forwards to an outside address; an account holder who adds an external account of their own can collect from a server of their own, which matters where SmtpAuthenticatedSenderCheck holds signed-in senders to their own addresses. |
| GitLab has remediated an issue in GitLab EE affecting all versions from 17.8 before 19.3.6, 19.4 before 19.4.3, and 19.5 before 19.5.1 that under certain conditions could have allowed an authenticated user to access paid AI features without a valid subscription due to insufficient server-side validation in billing eligibility checks. |
| In `api-gateway` versions till `1.7.3`, The default rate-limit key resolver, `ClientIpKeyResolver`, derives the per-client bucket key from the leftmost element of the `X-Forwarded-For` request header. That element is supplied by the originating HTTP client and is not validated against any trusted-proxy list. A single attacker can therefore obtain an unlimited number of independent rate-limit buckets — one per unique header value — and completely bypass the gateway's request-rate limiting on every route that uses the shipped default configuration. |
| AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.4, an attacker can send an absolute-form request that causes Request.scheme to use attacker-controlled request-target scheme data instead of the connection protocol. Applications that use Request.scheme for security decisions can consequently be tricked into treating an unencrypted connection as encrypted or an encrypted connection as unencrypted. This issue is fixed in version 3.14.4. |
| In Znuny through 7.3.6, an attacker can bypass specific standard login procedures and gain unauthorized access to sensitive system functions by manipulating a specific HTTP request header. Because the application incorrectly trusts this header, an attacker can impersonate any user, including administrators, without requiring a password. This grants full access to confidential data and system controls. More specifically, the HTTPBasicAuth modules for the agent (Kernel::System::Auth::HTTPBasicAuth) and customer (Kernel::System::CustomerAuth::HTTPBasicAuth) interfaces read the username to log in not only from $ENV{REMOTE_USER} (set by the web server after successful authentication), but also, as a fallback, from $ENV{HTTP_REMOTE_USER}, which is populated directly from an attacker-controllable "Remote-User" request header. On systems where HTTPBasicAuth was configured as the authentication backend, this allowed an attacker to log in as any existing user by sending a request with a forged Remote-User header, without providing any credentials. |
| Wheels through 4.1.1 derives its default production error-email address from the Host header of the request that starts the application. If no explicit error-email recipient is configured, a mail server is configured, and the server accepts an attacker-chosen Host, an attacker whose request triggers a cold start can direct later error emails to an address under their control for that application's lifetime. Emails disclose error and request metadata; on engines/versions where scope dumps render, they may also disclose configuration secrets and other users' session/cookie data. On the Lucee 7 engine, scope dumps fail to render, limiting disclosure to header fields. This is fixed in 4.1.2. |
| Use of a less trusted source in the DKIM signing of Progressive Robot hMailServer 6.0.0 through 6.3.6 allows a remote unauthenticated attacker to have mail they write signed with the DKIM key of a domain the server hosts, so that it passes DKIM and DMARC for that domain at other receivers. With DKIM signing enabled for a hosted domain, the server signed every message on its first delivery pass as the domain named in its From header, before local delivery, whatever the message's origin and without checking that its sender had authenticated. A sender anywhere could therefore send the server, as ordinary inbound mail, a message whose From is any address at such a domain, and the server signed it with that domain's key. Every copy the server then sent on to an address outside carried a valid signature aligned with the forged From, whatever the domain's DMARC policy: an account's forward, a mail rule's forward or copy, a Sieve redirect, an alias or distribution list with an outside member, the mirror copy, a managed-list or journal copy, or a message released from quarantine. A signed copy can also be re-sent to other recipients while the domain's key is unchanged. Exploitation needs DKIM signing to be enabled for the hosted domain (it is off until configured) and, for the forgery to leave the server, a forward, alias, list or rule that carries the domain's mail to an outside address. The signer likewise signed a message submitted over authenticated SMTP as whatever hosted domain its From header named, a header authenticated SMTP does not hold to the submitting account, so that an account of one hosted domain could have mail written in the name of another hosted domain signed with that domain's key; this mattered where the server holds signed-in senders to their own envelope addresses (SmtpAuthenticatedSenderCheck, off by default), as the signature was then the remaining way for such mail to pass the other domain's DMARC policy. |
| Coder before 2.34.7 contains an IP spoofing vulnerability in the ExtractRealIPAddress middleware that trusts the leftmost, client-supplied X-Forwarded-For value instead of the client IP appended by a reverse proxy. Attackers can send forged X-Forwarded-For values through appending proxies to bypass per-IP rate limits on login, one-time passcode, and password validation endpoints, enabling brute-force attacks, and to falsify IP addresses recorded in audit logs. |
| Wheels 4.0.6 through 4.1.2 lets an unauthenticated client switch a request into a separate test application context, including in production, by supplying an X-Wheels-Test-Context header or WHEELS_TEST_CONTEXT cookie with any value, or including a test-runner path anywhere in the URL, even the query string. The alternate application uses the same configuration, environment, datasource and debug settings: this is not an authentication bypass or data/debug escalation. It can bypass maintenance mode enabled only at runtime, provide a second set of in-memory rate-limit counters, and trigger additional application-startup side effects and memory use. This is fixed in 4.2.0. |
| Speedtest Tracker through 1.15.0 contains an IP allowlist bypass vulnerability that allows unauthenticated remote attackers to evade ALLOWED_IPS and Prometheus allowlists by spoofing X-Forwarded-For headers. Because bootstrap/app.php trusts every peer as a proxy, attackers can supply an allowlisted address to read /prometheus metrics and reach protected web and API endpoints. |
| Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains an Use of Less Trusted Source vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Information tampering. |
| PairDrop through 1.11.2 contains an IP spoofing vulnerability in Peer._setIP that allows remote attackers to join other networks' discovery rooms by supplying a forged cf-connecting-ip header. Attackers who know a victim's public IP can appear as a local device on self-hosted instances not behind Cloudflare to send or receive files. |
| Pingvin Share X before 1.22.0 contains a rate limit bypass vulnerability that allows unauthenticated remote attackers to evade per-IP throttling because backend/src/main.ts unconditionally trusts proxy headers. Attackers can rotate spoofed X-Forwarded-For values against /api/auth/signIn, /api/auth/signIn/totp, and /api/auth/resetPassword to brute-force passwords and TOTP codes and forge logged client IP addresses. |
| Gophish through 0.12.1 contains a rate limit bypass vulnerability that allows unauthenticated attackers to evade /login throttling by spoofing X-Forwarded-For or X-Real-IP headers. Attackers can send a different forwarded address per request so the limiter keyed on rewritten RemoteAddr never triggers, enabling unlimited password guessing and credential stuffing. |
| PyJWT is a Python implementation of JSON Web Token standards. From 2.1.0 until 2.15.0, PyJWT OKPAlgorithm.from_jwk in jwt/algorithms.py is affected because private-JWK import path does not compare the public key derived from d with x. This occurs when an OKP private JWK supplies non-corresponding x and d components. As a result, identity derived from x can differ from operations performed with d. Consequently, if an integration also accepts private key parameters from a proof header without rejecting them, an attacker may use a stolen sender-constrained token without the legitimate private key. This issue is fixed in version 2.15.0. |
| simple-php-router through 5.4.1.7 contains an IP restriction bypass vulnerability in the IpRestrictAccess middleware that allows remote unauthenticated attackers to bypass IP whitelist and blacklist protections. Attackers can spoof X-Forwarded-For, CF-Connecting-IP, or Client-IP headers to impersonate whitelisted addresses or evade blacklists, gaining access to IP-restricted routes. |
| Denuvo Anti-Tamper through 2026-03-04 allows bypass of a hypervisor presence check via CPUID interception (SimpleSvm.sys on AMD; hyperkd.sys and hyperhv.dll on Intel). |
| UnoPim versions before 2.0.1 and 2.1.1 trust all connecting clients as proxies and honor the X-Forwarded-Host header without validation, allowing unauthenticated attackers to inject arbitrary origins into admin layout pages. Attackers can set X-Forwarded-Host to redirect JavaScript asset loading to their server, and when responses are cached by shared proxies, subsequent administrators execute attacker-supplied code in their authenticated sessions. |
| Use of less trusted source vulnerability in PayTR Payment and Electronic Money Institution Inc. PayTR Virtual Pos iFrame API WHMCS Module allows Exploitation of Trusted Identifiers.
This issue affects PayTR Virtual Pos iFrame API WHMCS Module: from v9.0.0 before v9.0.3. |
