| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc3-topology: Prevent double freeing of ipc_control_data via load_bytes
We have sanity checks for byte controls and if any of the fail the locally
allocated scontrol->ipc_control_data is freed up, but not set to NULL.
On a rollback path of the error the higher level code will also try to free
the scontrol->ipc_control_data which will eventually going to lead to
memory corruption as double freeing memory is not a good thing. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio: Split migration ops from main device ops
vfio core checks whether the driver sets some migration op (e.g.
set_state/get_state) and accordingly calls its op.
However, currently mlx5 driver sets the above ops without regards to its
migration caps.
This might lead to unexpected usage/Oops if user space may call to the
above ops even if the driver doesn't support migration. As for example,
the migration state_mutex is not initialized in that case.
The cleanest way to manage that seems to split the migration ops from
the main device ops, this will let the driver setting them separately
from the main ops when it's applicable.
As part of that, validate ops construction on registration and include a
check for VFIO_MIGRATION_STOP_COPY since the uAPI claims it must be set
in migration_flags.
HISI driver was changed as well to match this scheme.
This scheme may enable down the road to come with some extra group of
ops (e.g. DMA log) that can be set without regards to the other options
based on driver caps. |
| In the Linux kernel, the following vulnerability has been resolved:
rpmsg: Fix possible refcount leak in rpmsg_register_device_override()
rpmsg_register_device_override need to call put_device to free vch when
driver_set_override fails.
Fix this by adding a put_device() to the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: imx_rproc: Fix refcount leak in imx_rproc_addr_init
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not needed anymore.
This function has two paths missing of_node_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
remoteproc: k3-r5: Fix refcount leak in k3_r5_cluster_of_init
Every iteration of for_each_available_child_of_node() decrements
the reference count of the previous node.
When breaking early from a for_each_available_child_of_node() loop,
we need to explicitly call of_node_put() on the child node.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8173-rt5650: Fix refcount leak in mt8173_rt5650_dev_probe
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Fix refcount leak in some error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8173: Fix refcount leak in mt8173_rt5650_rt5676_dev_probe
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Fix missing of_node_put() in error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mt6797-mt6351: Fix refcount leak in mt6797_mt6351_dev_probe
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: cros_ec_codec: Fix refcount leak in cros_ec_codec_platform_probe
of_parse_phandle() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: fix assertion 'jh->b_frozen_data == NULL' failure when journal aborted
Following process will fail assertion 'jh->b_frozen_data == NULL' in
jbd2_journal_dirty_metadata():
jbd2_journal_commit_transaction
unlink(dir/a)
jh->b_transaction = trans1
jh->b_jlist = BJ_Metadata
journal->j_running_transaction = NULL
trans1->t_state = T_COMMIT
unlink(dir/b)
handle->h_trans = trans2
do_get_write_access
jh->b_modified = 0
jh->b_frozen_data = frozen_buffer
jh->b_next_transaction = trans2
jbd2_journal_dirty_metadata
is_handle_aborted
is_journal_aborted // return false
--> jbd2 abort <--
while (commit_transaction->t_buffers)
if (is_journal_aborted)
jbd2_journal_refile_buffer
__jbd2_journal_refile_buffer
WRITE_ONCE(jh->b_transaction,
jh->b_next_transaction)
WRITE_ONCE(jh->b_next_transaction, NULL)
__jbd2_journal_file_buffer(jh, BJ_Reserved)
J_ASSERT_JH(jh, jh->b_frozen_data == NULL) // assertion failure !
The reproducer (See detail in [Link]) reports:
------------[ cut here ]------------
kernel BUG at fs/jbd2/transaction.c:1629!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 2 PID: 584 Comm: unlink Tainted: G W
5.19.0-rc6-00115-g4a57a8400075-dirty #697
RIP: 0010:jbd2_journal_dirty_metadata+0x3c5/0x470
RSP: 0018:ffffc90000be7ce0 EFLAGS: 00010202
Call Trace:
<TASK>
__ext4_handle_dirty_metadata+0xa0/0x290
ext4_handle_dirty_dirblock+0x10c/0x1d0
ext4_delete_entry+0x104/0x200
__ext4_unlink+0x22b/0x360
ext4_unlink+0x275/0x390
vfs_unlink+0x20b/0x4c0
do_unlinkat+0x42f/0x4c0
__x64_sys_unlink+0x37/0x50
do_syscall_64+0x35/0x80
After journal aborting, __jbd2_journal_refile_buffer() is executed with
holding @jh->b_state_lock, we can fix it by moving 'is_handle_aborted()'
into the area protected by @jh->b_state_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: call rcu_barrier() in ksmbd_server_exit()
racy issue is triggered the bug by racing between closing a connection
and rmmod. In ksmbd, rcu_barrier() is not called at module unload time,
so nothing prevents ksmbd from getting unloaded while it still has RCU
callbacks pending. It leads to trigger unintended execution of kernel
code locally and use to defeat protections such as Kernel Lockdown |
| In the Linux kernel, the following vulnerability has been resolved:
virtio-net: fix recursived rtnl_lock() during probe()
The deadlock appears in a stack trace like:
virtnet_probe()
rtnl_lock()
virtio_config_changed_work()
netdev_notify_peers()
rtnl_lock()
It happens if the VMM sends a VIRTIO_NET_S_ANNOUNCE request while the
virtio-net driver is still probing.
The config_work in probe() will get scheduled until virtnet_open() enables
the config change notification via virtio_config_driver_enable(). |
| In the Linux kernel, the following vulnerability has been resolved:
efivarfs: Fix memory leak of efivarfs_fs_info in fs_context error paths
When processing mount options, efivarfs allocates efivarfs_fs_info (sfi)
early in fs_context initialization. However, sfi is associated with the
superblock and typically freed when the superblock is destroyed. If the
fs_context is released (final put) before fill_super is called—such as
on error paths or during reconfiguration—the sfi structure would leak,
as ownership never transfers to the superblock.
Implement the .free callback in efivarfs_context_ops to ensure any
allocated sfi is properly freed if the fs_context is torn down before
fill_super, preventing this memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: mcp2221: prevent a buffer overflow in mcp_smbus_write()
Smatch Warning:
drivers/hid/hid-mcp2221.c:388 mcp_smbus_write() error: __memcpy()
'&mcp->txbuf[5]' too small (59 vs 255)
drivers/hid/hid-mcp2221.c:388 mcp_smbus_write() error: __memcpy() 'buf'
too small (34 vs 255)
The 'len' variable can take a value between 0-255 as it can come from
data->block[0] and it is user data. So add an bound check to prevent a
buffer overflow in memcpy(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: Fix null-ptr-deref in mt7925_thermal_init()
devm_kasprintf() returns NULL on error. Currently, mt7925_thermal_init()
does not check for this case, which results in a NULL pointer
dereference.
Add NULL check after devm_kasprintf() to prevent this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable()
If 'ep' is NULL, result of ep_to_cdns3_ep(ep) is invalid pointer
and its dereference with priv_ep->cdns3_dev may cause panic.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: xhci_plat_remove: avoid NULL dereference
Since commit 4736ebd7fcaff1eb8481c140ba494962847d6e0a ("usb: host:
xhci-plat: omit shared hcd if either root hub has no ports")
xhci->shared_hcd can be NULL, which causes the following Oops
on reboot:
[ 710.124450] systemd-shutdown[1]: Rebooting.
[ 710.298861] xhci-hcd xhci-hcd.2.auto: remove, state 4
[ 710.304217] usb usb3: USB disconnect, device number 1
[ 710.317441] xhci-hcd xhci-hcd.2.auto: USB bus 3 deregistered
[ 710.323280] xhci-hcd xhci-hcd.2.auto: remove, state 1
[ 710.328401] usb usb2: USB disconnect, device number 1
[ 710.333515] usb 2-3: USB disconnect, device number 2
[ 710.467649] xhci-hcd xhci-hcd.2.auto: USB bus 2 deregistered
[ 710.475450] Unable to handle kernel NULL pointer dereference at virtual address 00000000000003b8
[ 710.484425] Mem abort info:
[ 710.487265] ESR = 0x0000000096000004
[ 710.491060] EC = 0x25: DABT (current EL), IL = 32 bits
[ 710.496427] SET = 0, FnV = 0
[ 710.499525] EA = 0, S1PTW = 0
[ 710.502716] FSC = 0x04: level 0 translation fault
[ 710.507648] Data abort info:
[ 710.510577] ISV = 0, ISS = 0x00000004
[ 710.514462] CM = 0, WnR = 0
[ 710.517480] user pgtable: 4k pages, 48-bit VAs, pgdp=00000008b0050000
[ 710.523976] [00000000000003b8] pgd=0000000000000000, p4d=0000000000000000
[ 710.530961] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 710.536551] Modules linked in: rfkill input_leds snd_soc_simple_card snd_soc_simple_card_utils snd_soc_nau8822 designware_i2s snd_soc_core dw_hdmi_ahb_audio snd_pcm_dmaengine arm_ccn panfrost ac97_bus gpu_sched snd_pcm at24 fuse configfs sdhci_of_dwcmshc sdhci_pltfm sdhci nvme led_class mmc_core nvme_core bt1_pvt polynomial tp_serio snd_seq_midi snd_seq_midi_event snd_seq snd_timer snd_rawmidi snd_seq_device snd soundcore efivarfs ipv6
[ 710.575286] CPU: 7 PID: 1 Comm: systemd-shutdow Not tainted 5.19.0-rc7-00043-gfd8619f4fd54 #1
[ 710.583822] Hardware name: T-Platforms TF307-MB/BM1BM1-A, BIOS 5.6 07/06/2022
[ 710.590972] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 710.597949] pc : usb_remove_hcd+0x34/0x1e4
[ 710.602067] lr : xhci_plat_remove+0x74/0x140
[ 710.606351] sp : ffff800009f3b7c0
[ 710.609674] x29: ffff800009f3b7c0 x28: ffff000800960040 x27: 0000000000000000
[ 710.616833] x26: ffff800008dc22a0 x25: 0000000000000000 x24: 0000000000000000
[ 710.623992] x23: 0000000000000000 x22: ffff000805465810 x21: ffff000805465800
[ 710.631149] x20: ffff000800f80000 x19: 0000000000000000 x18: ffffffffffffffff
[ 710.638307] x17: ffff000805096000 x16: ffff00080633b800 x15: ffff000806537a1c
[ 710.645465] x14: 0000000000000001 x13: 0000000000000000 x12: ffff00080378d6f0
[ 710.652621] x11: ffff00080041a900 x10: ffff800009b204e8 x9 : ffff8000088abaa4
[ 710.659779] x8 : ffff000800960040 x7 : ffff800009409000 x6 : 0000000000000001
[ 710.666936] x5 : ffff800009241000 x4 : ffff800009241440 x3 : 0000000000000000
[ 710.674094] x2 : ffff000800960040 x1 : ffff000800960040 x0 : 0000000000000000
[ 710.681251] Call trace:
[ 710.683704] usb_remove_hcd+0x34/0x1e4
[ 710.687467] xhci_plat_remove+0x74/0x140
[ 710.691400] platform_remove+0x34/0x70
[ 710.695165] device_remove+0x54/0x90
[ 710.698753] device_release_driver_internal+0x200/0x270
[ 710.703992] device_release_driver+0x24/0x30
[ 710.708273] bus_remove_device+0xe0/0x16c
[ 710.712293] device_del+0x178/0x390
[ 710.715797] platform_device_del.part.0+0x24/0x90
[ 710.720514] platform_device_unregister+0x30/0x50
[ 710.725232] dwc3_host_exit+0x20/0x30
[ 710.728907] dwc3_remove+0x174/0x1b0
[ 710.732494] platform_remove+0x34/0x70
[ 710.736254] device_remove+0x54/0x90
[ 710.739840] device_release_driver_internal+0x200/0x270
[ 710.745078] device_release_driver+0x24/0x30
[ 710.749359] bus_remove_device+0xe0/0x16c
[ 710.753380] device_del+0x178/0x390
[ 710.756881] platform_device_del.part
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix a window for use-after-free
During a destroy CQ an interrupt may cause processing of a CQE after CQ
resources are freed by irdma_cq_free_rsrc(). Fix this by moving the call
to irdma_cq_free_rsrc() after the irdma_sc_cleanup_ceqes(), which is
called under the cq_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: fix a UAF when vma->mm is freed after vma->vm_refcnt got dropped
By inducing delays in the right places, Jann Horn created a reproducer for
a hard to hit UAF issue that became possible after VMAs were allowed to be
recycled by adding SLAB_TYPESAFE_BY_RCU to their cache.
Race description is borrowed from Jann's discovery report:
lock_vma_under_rcu() looks up a VMA locklessly with mas_walk() under
rcu_read_lock(). At that point, the VMA may be concurrently freed, and it
can be recycled by another process. vma_start_read() then increments the
vma->vm_refcnt (if it is in an acceptable range), and if this succeeds,
vma_start_read() can return a recycled VMA.
In this scenario where the VMA has been recycled, lock_vma_under_rcu()
will then detect the mismatching ->vm_mm pointer and drop the VMA through
vma_end_read(), which calls vma_refcount_put(). vma_refcount_put() drops
the refcount and then calls rcuwait_wake_up() using a copy of vma->vm_mm.
This is wrong: It implicitly assumes that the caller is keeping the VMA's
mm alive, but in this scenario the caller has no relation to the VMA's mm,
so the rcuwait_wake_up() can cause UAF.
The diagram depicting the race:
T1 T2 T3
== == ==
lock_vma_under_rcu
mas_walk
<VMA gets removed from mm>
mmap
<the same VMA is reallocated>
vma_start_read
__refcount_inc_not_zero_limited_acquire
munmap
__vma_enter_locked
refcount_add_not_zero
vma_end_read
vma_refcount_put
__refcount_dec_and_test
rcuwait_wait_event
<finish operation>
rcuwait_wake_up [UAF]
Note that rcuwait_wait_event() in T3 does not block because refcount was
already dropped by T1. At this point T3 can exit and free the mm causing
UAF in T1.
To avoid this we move vma->vm_mm verification into vma_start_read() and
grab vma->vm_mm to stabilize it before vma_refcount_put() operation.
[surenb@google.com: v3] |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/rsrc: validate buffer count with offset for cloning
syzbot reports that it can trigger a WARN_ON() for kmalloc() attempt
that's too big:
WARNING: CPU: 0 PID: 6488 at mm/slub.c:5024 __kvmalloc_node_noprof+0x520/0x640 mm/slub.c:5024
Modules linked in:
CPU: 0 UID: 0 PID: 6488 Comm: syz-executor312 Not tainted 6.15.0-rc7-syzkaller-gd7fa1af5b33e #0 PREEMPT
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __kvmalloc_node_noprof+0x520/0x640 mm/slub.c:5024
lr : __do_kmalloc_node mm/slub.c:-1 [inline]
lr : __kvmalloc_node_noprof+0x3b4/0x640 mm/slub.c:5012
sp : ffff80009cfd7a90
x29: ffff80009cfd7ac0 x28: ffff0000dd52a120 x27: 0000000000412dc0
x26: 0000000000000178 x25: ffff7000139faf70 x24: 0000000000000000
x23: ffff800082f4cea8 x22: 00000000ffffffff x21: 000000010cd004a8
x20: ffff0000d75816c0 x19: ffff0000dd52a000 x18: 00000000ffffffff
x17: ffff800092f39000 x16: ffff80008adbe9e4 x15: 0000000000000005
x14: 1ffff000139faf1c x13: 0000000000000000 x12: 0000000000000000
x11: ffff7000139faf21 x10: 0000000000000003 x9 : ffff80008f27b938
x8 : 0000000000000002 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 00000000ffffffff x4 : 0000000000400dc0 x3 : 0000000200000000
x2 : 000000010cd004a8 x1 : ffff80008b3ebc40 x0 : 0000000000000001
Call trace:
__kvmalloc_node_noprof+0x520/0x640 mm/slub.c:5024 (P)
kvmalloc_array_node_noprof include/linux/slab.h:1065 [inline]
io_rsrc_data_alloc io_uring/rsrc.c:206 [inline]
io_clone_buffers io_uring/rsrc.c:1178 [inline]
io_register_clone_buffers+0x484/0xa14 io_uring/rsrc.c:1287
__io_uring_register io_uring/register.c:815 [inline]
__do_sys_io_uring_register io_uring/register.c:926 [inline]
__se_sys_io_uring_register io_uring/register.c:903 [inline]
__arm64_sys_io_uring_register+0x42c/0xea8 io_uring/register.c:903
__invoke_syscall arch/arm64/kernel/syscall.c:35 [inline]
invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:49
el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:132
do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:151
el0_svc+0x58/0x17c arch/arm64/kernel/entry-common.c:767
el0t_64_sync_handler+0x78/0x108 arch/arm64/kernel/entry-common.c:786
el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:600
which is due to offset + buffer_count being too large. The registration
code checks only the total count of buffers, but given that the indexing
is an array, it should also check offset + count. That can't exceed
IORING_MAX_REG_BUFFERS either, as there's no way to reach buffers beyond
that limit.
There's no issue with registrering a table this large, outside of the
fact that it's pointless to register buffers that cannot be reached, and
that it can trigger this kmalloc() warning for attempting an allocation
that is too large. |
