Export limit exceeded: 417557 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417557 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-89962 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/kexec_file: Prevent kexec range truncation Sashiko AI review pointed out the following issue. The __merge_memory_ranges() function incorrectly handles overlapping memory ranges when merging them. Although sort_memory_ranges() sorts all ranges by their start address in ascending order beforehand, the merge logic remains defective in two ways: 1. It compares the current range's start against the previous element (i-1) instead of the running target index (idx) 2. It unconditionally overwrites 'ranges[idx].end' with 'ranges[i].end'. This logic flaw leads to critical memory truncation when a larger memory range completely subsumes subsequent smaller ranges. For example, consider a sorted input array with three ranges: Range A (idx=0): [0x1000 - 0x9000] Range B (i=1): [0x2000 - 0x5000] (completely inside Range A) Range C (i=2): [0x6000 - 0x8000] (completely inside Range A) 1. When i=1 (Range B): ranges[1].start (0x2000) <= ranges[0].end + 1 (0x9001) is TRUE. The code executes: ranges[0].end = ranges[1].end, which erroneously shrinks Range A's end from 0x9000 down to 0x5000. 2. When i=2 (Range C): ranges[2].start (0x6000) <= ranges[1].end + 1 (0x5001) is FALSE. The code falls into the else block, creating a broken new range. As a result, valid memory fragments [0x5001 - 0x5fff] and [0x8001 - 0x9000] are completely lost from the kexec exclude lists, potentially allowing the crash kernel to overwrite active memory, causing data corruption or crashes. Fix this by ensuring the start of the current range is compared against the end of the active merged range (idx), and use max() to safely prevent the outer boundary from being truncated. | ||||
| CVE-2026-89960 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: fix stale pqap_hook pointer on error in vfio_ap_mdev_set_kvm() In vfio_ap_mdev_set_kvm(), kvm->arch.crypto.pqap_hook is set to &matrix_mdev->pqap_hook before the update locks are acquired and the mdev list is checked for a conflicting assignment. If another mdev is already attached to the same KVM instance, the function returns -EPERM without restoring the hook pointer, leaving kvm->arch.crypto.pqap_hook pointing at the failing matrix_mdev instead of the mdev that legitimately owns the KVM. Since matrix_mdev->kvm is never set on this error path, vfio_ap_mdev_unset_kvm() will not clean up the hook when matrix_mdev is later closed. If matrix_mdev is subsequently freed, any PQAP instruction executed by the guest will dereference the stale pointer through pqap_hook_rwsem, resulting in a use-after-free. Since kvm->arch.crypto.pqap_hook is only set in the vfio_ap_mdev_set_kvm() function and is cleared in the vfio_ap_mdev_unset_kvm() function, a check for 'kvm->arch.crypto.pqap_hook != NULL' is all that is needed to determine whether it belongs to another mdev. This will alleviate the need to iterate the matrix_dev->mdev_list list to see if the kvm object is assigned to another mdev.This was introduced in v3 to alleviate the need to take the mdevs_lock while iterating the list; however, this did not prevent a potential race condition. The pqap_hook_rwsem(write) is now performed inside get_update_locks_for_kvm(), which is updated to acquire pqap_hook_rwsem(write) between kvm->lock and mdevs_lock. This ordering is consistent with the PQAP intercept path, which acquires pqap_hook_rwsem in read mode while srcu is held under vcpu->mutex, establishing the dependency: kvm->lock -> vcpu->mutex -> srcu -> pqap_hook_rwsem(read). The pqap_hook_rwsem is now released inside the release_update_locks_for_kvm(), which is updated to release pqap_hook_rwsem(write) between mdevs_lock and kvm->lock. Additionally, kvm_put_kvm() in vfio_ap_mdev_unset_kvm() is moved after release_update_locks_for_kvm(). Previously it was called while kvm->lock was held; if it were ever the last reference, kvm_destroy_vm() would run under kvm->lock, which would deadlock. | ||||
| CVE-2026-89958 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: Fix dereference matrix_mdev->kvm without checking for NULL The ap_driver structure has two fields which are function pointers to callbacks: * .on_config_changed: called at the start of the AP bus scan function to notify the device driver that the host AP configuration has changed and the associated AP devices will be added or removed accordingly. This gives the implementor a chance to evaluate the configuration changes and respond to them before the associated devices are added or removed. * .on_scan_complete: Called at the end of the AP bus scan function to notify the device driver that the host AP configuration has changed and the AP devices have been added or removed accordingly. This gives the implementor the opportunity to respond to the changes after the associated devices are added or removed. These two callbacks are implemented in the vfio_ap device driver via the vfio_ap_on_cfg_changed and vfio_ap_on_scan_complete functions respectively. Within the call stack of these two callback functions the matrix_mdev->kvm->lock mutex is taken without checking whether matrix_mdev->kvm is NULL or not. If matrix_mdev->kvm has never been set, trying to take the lock will trigger a NULL pointer dereference. This patch adds checks for matrix_mdev->kvm == NULL before taking the matrix_mdev->kvm->lock mutex. Note that the matrix_mdev->kvm->lock mutex taken in the vfio_ap_mdev_hot_plug_config function is moved to the calling function along with the matrix_dev->mdevs_lock which is needed there to access the fields of the matrix_mdev. It makes little sense to make the change the check for matrix_mdev->kvm there before taking the kvm->lock mutex only to have to move it out via another patch, so it is done in this patch. It is important to make note of the following: 1. The matrix_dev->guests_lock is acquired at the start of both callback functions. This ensures that matrix_mdev will not be removed via the vfio_ap_mdev_remove function because it too takes matrix_dev_guests_lock before removing the object; so, matrix_mdev will be available for the duration of the callback functions. 2. The matrix_dev->mdevs_lock mutex must be taken in order to access fields within the matrix_mdev structure 3. matrix_mdev->kvm->lock mutex must be taken before the matrix_dev->mdevs_lock to prevent a lockdep splat. 4: The kvm->lock must be held while plugging the guest's AP configuration into its SIE state description via the vfio_ap_mdev_update_guest_apcb function. 5. The vfio_ap_mdev_update_guest_apcb checks matrix_mdev->kvm to verify it is not NULL before doing the hot plug of the guest's AP configuration. | ||||
| CVE-2026-89956 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: Fix missing lock required to access list of ap_matrix_mdev objects In order to traverse or add/remove ap_matrix_mdev objects in the matrix_dev->mdev_list, the matrix_dev->guests_lock mutex must be held. There are two functions that access the list without holding the mutex: vfio_ap_mdev_probe function ~~~~~~~~~~~~~~~~~~~~~~~~~~~ The vfio_ap_mdev_probe function uses the matrix_dev->mdevs_lock mutex to guard the add of a newly created ap_matrix_mdev object to the matrix_dev->mdev_list. This mutex does not protect list access; its purpose is to guard against concurrent access to fields contained in an ap_matrix_mdev object. This could lead to kernel memory corruption or use-after-free if another mdev is created or removed concurrently. The adding of an ap_matrix_mdev object to matrix_dev->mdev_list is now guarded by the matrix_dev->guests_lock which is the correct way to protect against concurrent mdev_list access. Also removed the following two lines of code because the matrix_mdev is allocated via vfio_alloc_device macro which uses kzalloc, so req_trigger and cfg_chg_trigger are already zero-initialised when the struct is allocated before the call to vfio_register_emulated_iommu_dev. This prevents a window whereby these triggers are set to NULL after the device is exposed to userspace. matrix_mdev->req_trigger = NULL; matrix_mdev->cfg_chg_trigger = NULL; vfio_ap_mdev_for_queue function ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The status_show function that supports display of the status attribute of the devices in /sys/bus/ap/devices calls the vfio_ap_mdev_for_queue function which iterates the matrix_dev->mdev_list to find the object representing the queue device whose status is to be displayed. In order to traverse this list, the matrix_dev->guests_lock mutex must be held. To fix this, the guests_lock mutex is taken prior to taking the matrix_dev->mdevs_lock mutex in the status_show function. It is taken there rather than the vfio_ap_mdev_for_queue function - where it is needed - because it must be taken prior to the mdevs_lock mutex in order to adhere to the proper locking order and prevent a lockdep splat; also because the mdevs_lock is needed there to access fields within the matrix_mdev object in that function. See the vfio-ap-locking.rst in the linux kernel tree. | ||||
| CVE-2026-89955 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: Fix NULL deref in status_show() during queue probe When vfio_ap_mdev_probe_queue() creates the sysfs attribute group, the queue's driver data has not yet been set. A concurrent read of the 'status' attribute can therefore call dev_get_drvdata() and get NULL, which is then passed directly to vfio_ap_mdev_for_queue() where q->apqn is unconditionally dereferenced, causing a NULL pointer dereference. Fix this by acquiring the update locks before calling sysfs_create_group(). The status_show() function acquires guests_lock before reading the driver data, so any concurrent read will block until after dev_set_drvdata() has been called and the update locks are released. As a bonus, the APQN no longer needs to be read from the queue struct after allocation — it can be read directly from apdev before allocation and stored in a local variable, which is then assigned to q->apqn once the allocation succeeds. | ||||
| CVE-2026-89944 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: hdac_hda: Fix hlink refcount leak on component registration failure hdac_hda_dev_probe() gets the HDA link with snd_hdac_ext_bus_link_get() before registering the ASoC component. If component registration fails, the function returns without dropping the link reference. Always call snd_hdac_ext_bus_link_put() after the registration attempt so the reference taken during probe is balanced on both success and failure. | ||||
| CVE-2026-89934 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: light: ltrf216a: fix runtime PM reference leak in error path ltrf216a_get_lux() acquires a runtime PM reference by calling ltrf216a_set_power_state(data, true). However, if ltrf216a_read_data() fails, the function returns immediately without dropping the reference. This leaves the runtime PM usage count unbalanced, preventing the device from autosuspending after a failed read. Fix this by releasing the runtime PM reference before returning from the error path. | ||||
| CVE-2026-89933 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: pressure: dps310: fix NULL pointer dereference on ACPI probe When the device is enumerated through its ACPI HID (IFX3100), i2c_client_get_device_id() returns NULL: the ACPI-derived client name does not match the driver's i2c_device_id table. dps310_probe() then dereferences that NULL pointer in "iio->name = id->name" and crashes the kernel during probe. The IIO device name is always "dps310", so set it directly and drop the now-unused device-id lookup. | ||||
| CVE-2026-89930 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nVMX: Service local TLB flushes on failed nested VM-Enter KVM services local TLB flushes on "full" nested VM-Exits (through __nested_vmx_vmexit()), but not if a nested VM-Enter fails (e.g. due to failed VMCS checks in nested_vmx_enter_non_root_mode()). However, it is possible that KVM had queued TLB flushes that need to be performed, even if the nested VM-Enter was not successful. For example, if VPID is disabled for L2 (via nested_vmx_transition_tlb_flush(), or if via the MSR load lists, as the SDM says: If any MSR is being loaded in such a way that would architecturally require a TLB flush, the TLBs are updated so that, after VM entry, the logical processor will not use any translations that were cached before the transition. The SDM is unclear about when the TLB flush should occur, and whether or not a failed VM entry would flush the TLB, so it is safer to always do the TLB flush in this case. More concretely, KVM also updates the last VPID L1 used for L2 in nested_vmx_transition_tlb_flush() (i.e. last_vpid), even if the VM entry ultimately fails. With the current code, KVM could miss a TLB flush if L1 changes L2's VPID, then does a failed VM entry followed by a successful one, as the failed VM entry would update last_vpid but not actually flush the TLB. Servicing local TLB flushes on failed VM entries makes sure that the TLB is always flushed when last_vpid is updated. | ||||
| CVE-2026-89926 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix length check __import_wp_info() struct kvm_hw_breakpoint::len is a __u64 that is fully controlled by user space. This is then assigned to wp_info->len, which is an int. The bounds check is done on the truncated value while the allocation uses the untruncated one: wp_info->len = bp_data->len; [...] if (wp_info->len < 0 || wp_info->len > MAX_WP_SIZE) return -EINVAL; wp_info->old_data = kmalloc(bp_data->len, GFP_KERNEL_ACCOUNT); Use the validated value for the allocation as intended. Without this fix userspace can trigger >4GB allocations which will fail and result in a WARN due to MAX_PAGE_ORDER. | ||||
| CVE-2026-89921 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Zero initialize data structures for inject_pfault_token __kvm_inject_pfault_token() only sets .type and .u.ext.ext_params2 of the on-stack struct kvm_s390_irq but the full ext substructure is copied into the cpu local variable on inject. ext_params and pad contain stale stack values. Interrupt delivery only uses ext_params2, so nothing leaks to the guest, but a host user can use the migration ioctls to get to the data. Fix by zero-initializing the irq struct. Do the same for the inti data structure. | ||||
| CVE-2026-89920 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix memory corruption by not reinjecting CK machine checks Channel-subsystem damage machine checks are for the host channel subsystem. The guest channel subsystem is emulated in the userspace VMM. There is no point in forwarding such machine checks into the guest. This also simplifies the machine check reinjection and avoids kfree of a stack variable as reported by sashiko. There might be still machine checks that have the ck bit set with another bit (like instruction damage), mask out the CK bit in s390_backup_mcck_info(), like the CP and ED bits already are. | ||||
| CVE-2026-89912 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-its: Don't dereference a NULL collection on ITT save MAPC with V=0 drops ite->collection but leaves the ITE on the device's ITT list, and vgic_its_save_ite() dereferences it unconditionally. A guest that issues MAPD, MAPTI and then MAPC(V=0) therefore oopses the host when the VMM issues KVM_DEV_ARM_ITS_SAVE_TABLES to migrate it. That sequence is UNPREDICTABLE per the architecture, but KVM already handles the resulting state in the translate, MOVI and DISCARD paths. Save a zeroed entry, which vgic_its_restore_ite() reads back as invalid. Skipping the ITE instead would leave the ITT slot holding whatever is in guest memory, and restore rejects an entry naming a collection the restored collection table does not have. | ||||
| CVE-2026-89884 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: platform: mtk-mdp3: fix NULL deref on failed SCP lookup Add the missing sanity check after looking up the SCP to avoid dereferencing a NULL-pointer in case its driver has not yet been bound. | ||||
| CVE-2026-89877 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: media: saa7164: fix cleanup on resource allocation failure saa7164_dev_setup() adds the device to the global saa7164_devlist before requesting the PCI BAR memory regions. If get_resources() fails, saa7164_dev_setup() decrements the device count and returns an error, but leaves the device on saa7164_devlist. The probe error path then frees the device, leaving a dangling entry on the global list. Reuse the existing MMIO mapping error path to remove the device from saa7164_devlist and decrement the device count before returning. Also release BAR0 if it was successfully requested but the BAR2 request fails. | ||||
| CVE-2026-89870 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: zoran: Avoid freeing a registered video_device twice zoran_init_video_device() installs zoran_vdev_release() as the video_device release callback through zoran_template. After video_register_device() succeeds, video_unregister_device() drops the registered video_device reference and the V4L2 core eventually invokes that release callback, which kfree()s the video_device. zoran_exit_video_devices() called video_unregister_device() and then kfree(zr->video_dev), so device teardown could free the same video_device twice. Remove the direct kfree() and clear the cached pointer after unregistering. The pre-registration failure path keeps its manual free because the video_device was not registered there. This issue was found by a static analysis checker and confirmed by manual source review. | ||||
| CVE-2026-89860 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Initialize NVMe abort_work once at submission qla_nvme_fcp_abort() and qla_nvme_ls_abort() ran INIT_WORK() on priv->abort_work immediately before schedule_work(). INIT_WORK() reinitializes the work_struct, resetting its list head and clearing the pending bit. If an abort is issued more than once for the same command (for example, concurrent transport teardown and a timeout-driven abort), the second INIT_WORK() reinitializes a work item that is already queued, which can corrupt the workqueue list and lead to crashes or a looping worker. Initialize priv->abort_work once at command submission, next to the existing per-command spin_lock_init(&priv->cmd_lock), and leave only schedule_work() in the abort paths. schedule_work() already does nothing when the work item is still pending, so a repeated abort no longer disturbs an in-flight work item. The command is not returned to the transport until the final kref_put()/release callback runs after abort_work has completed, so the work item is idle before priv is reused and the single submission-time INIT_WORK() is safe. | ||||
| CVE-2026-89859 | 1 Linux | 1 Linux Kernel | 2026-10-30 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Zero dport diagnostics buffer to avoid info leak qla2x00_do_dport_diagnostics() allocates the qla_dport_diag response buffer with kmalloc_obj() (non-zeroing) and, on success, copies the full sizeof(*dd) back to user space via sg_copy_from_buffer(). The inbound sg_copy_to_buffer() only fills as many bytes as the user request payload provides, and qla26xx_dport_diagnostics() zeroes only dd->buf. The options and unused[] fields are therefore copied out uninitialized, leaking kernel heap contents to user space. Allocate with kzalloc_obj(), matching qla2x00_do_dport_diagnostics_v2(). | ||||
| CVE-2026-89848 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Quiesce response IRQ before freeing request queue qla2xxx_delete_qpair() deletes the request queue before the response queue. qla25xx_delete_req_que() frees the request queue memory (kfree(req) in qla25xx_free_req_que()), but the response-queue MSI-X is only released later, in qla25xx_free_rsp_que(). In that window the response interrupt can still fire, qla2xxx_msix_rsp_q() queues qpair->q_work, and qla_do_work() -> qla24xx_process_response_queue() dereferences the now-freed rsp->req (LOGINOUT/CT/ELS entries and the status path), a use-after-free. The cancel_work_sync() added for the qpair teardown lives in the response free path, which runs after the request queue is already freed, so it does not protect rsp->req. Release the response-queue interrupt and flush qpair->q_work before deleting the request queue, so no late completion can reach the freed request queue. Clearing have_irq makes the subsequent qla25xx_free_rsp_que() skip its free_irq(), and the firmware queue-delete order (request then response) is preserved; the request-delete mailbox completes on the default vector and is unaffected by dropping the qpair response interrupt early. | ||||
| CVE-2026-89840 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: validate MOVE_RANGE destination size F2FS_IOC_MOVE_RANGE checks the source range, but not the destination end before updating i_size. A source hole can expose this: __clone_blkaddrs() skips NULL_ADDR entries and returns success, so the caller can still extend the destination inode with unchecked pos_out + len. Reject destination overflow and use inode_newsize_ok() before extending the destination inode. | ||||