| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: preserve NATIVE_LABELS on already-initialized sb in set_mnt_opts
When an NFSv4 filesystem exported with security_label is mounted a
second time, sget_fc() returns the existing superblock and
nfs_get_root() calls security_sb_set_mnt_opts() again on it. Since the
superblock is already SB_INITIALIZED, selinux_set_mnt_opts() takes an
early exit without setting SECURITY_LSM_NATIVE_LABELS in
*set_kern_flags. nfs_get_root() then sees kflags without
SECURITY_LSM_NATIVE_LABELS set and clears NFS_CAP_SECURITY_LABEL on
the shared nfs_server, silently disabling per-file labeling for both
the new and the original mount.
Commit 3815a245b501 ("security/selinux: fix SECURITY_LSM_NATIVE_LABELS
on reused superblock") fixed the same problem in
selinux_sb_clone_mnt_opts(). The reused-superblock path for a plain
second mount now goes through sb_set_mnt_opts rather than
sb_clone_mnt_opts, so it needs the same treatment: on both
SE_SBINITIALIZED early exits, set SECURITY_LSM_NATIVE_LABELS in
*set_kern_flags when the superblock was already using
SECURITY_FS_USE_NATVE. |
| In the Linux kernel, the following vulnerability has been resolved:
fsverity: RCU-delay the freeing of struct fsverity_info
__fsverity_get_info() calls rhashtable_lookup_fast(), which just uses
rcu_read_lock() and doesn't directly synchronize with
fsverity_remove_info().
For the same inode this isn't a problem: its fsverity_info is removed
only at inode eviction time or upon failure to enable verity, when the
inode no longer needs its fsverity_info and it will no longer be
accessed via that inode.
However, this is broken and can cause a use-after-free for concurrent
__fsverity_get_info() for *different* inodes. Those rely on following
fsverity_info::rhash_head in the rhashtable under rcu_read_lock() only.
They also use fsverity_info::inode to do the key comparison.
Fix this by RCU-delaying the freeing of 'struct fsverity_info' after
it's been removed from the rhashtable. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: mpsse: fix race when arming the IRQ poll worker
gpio_mpsse_irq_enable() arms the poll worker before publishing it:
schedule_work() runs before the worker is added to priv->workers. If
gpio_mpsse_disconnect() walks the list in that window it misses the
worker, and once disconnect returns, the USB core frees mpsse_priv
while the orphaned gpio_mpsse_poll() work keeps accessing it, causing
a use-after-free.
Fix this by publishing and arming the worker in one irq_spin
critical section. Teardown walks the same list under irq_spin, so a
worker found on the list is guaranteed to be armed, and
cancel_work_sync() handles it whether it is queued or running.
A worker armed after the disconnect walk would still be missed, so
also set a new priv->dying flag under irq_spin before the teardown
walk, and check it in the same critical section, freeing it via
kfree_rcu() instead when the device is going away, since kfree()
would be called with the IRQ core's raw spinlock held and may sleep
on PREEMPT_RT. schedule_work() is safe to call with irq_spin held,
and the next probe gets a fresh mpsse_priv, so the flag never needs
to be cleared.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: xilinx: fix runtime PM leak on request error path
pm_runtime_get_sync() leaves the usage counter incremented even when it
fails, and xgpio_request() returns the error without dropping it.
gpiolib does not call ->free() when ->request() fails, so xgpio_free(),
which holds the only matching pm_runtime_put(), never runs. The reference
is leaked and the controller can no longer runtime-suspend, so its clock
stays enabled.
Switch to pm_runtime_resume_and_get(), which only increments the usage
counter on success. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix napi_disable deadlock when attempting to disable XSK pools
When disabling XSK pools, GVE calls the unlocked versions of
napi_disable and napi_enable. However, the netdev lock has already been
acquired before ndo_bpf is called because GVE supports queue management
ops. Calling the unlocked versions of napi_disable/enable results in a
deadlock when attempting to disable XSK pools, as the thread attempts to
re-acquire a lock it already holds.
Update the NAPI calls to use the locked versions.
This issue was found in production. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix XSK buffer leak when rings are stopped
GVE does not free XSK buffers when resetting ring state as a part of
stopping queues. This causes all XSK buffers which are posted to the
NIC to be leaked.
Free XSK buffers attached to an allocated buf_state when stopping rings.
This issue was hit in production. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix XSK buffer leak on error descriptor
When the error bit is set in the RX completion descriptor, the buf_state
and its attached buffer should be freed. In the case of AF_XDP ZC, the
XSK buffer was not freed, leading to a leak.
This issue was caught by LLM. |
| In the Linux kernel, the following vulnerability has been resolved:
ibmveth: h_free logical LAN on open-fail after register
ibmveth_open() registers the logical LAN, then allocates the RX
buffer pools. A pool failure jumps to out_free_buffer_pools without
h_free_logical_lan(), so PHYP still owns the buffer-list page when
it is unmapped. request_irq() failure already issued the hypercall
before taking the same label.
Move that h_free to the shared post-register unwind so both paths
deregister before the buffer list is unmapped. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix use-after-free in dynamic port cleanup
ice_dealloc_dynamic_port() uses dyn_port->vsi->idx to erase the dynamic
port from pf->dyn_ports. However, it frees the VSI before reading the
index for the erase, resulting in a use-after-free.
Follow the reverse of the allocation order in ice_alloc_dynamic_port()
by erasing the xarray entry before freeing the VSI. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix metadata_dst refcount handling on representor teardown
ice_eswitch_release_repr() uses metadata_dst_free() to release the
representor's metadata_dst. metadata_dst_free() directly frees the
underlying memory without checking the dst_entry refcount.
When ice_eswitch_port_start_xmit() processes a packet, it takes a
reference via dst_hold() and attaches the metadata_dst to the skb.
If the representor is torn down while packets are still queued on
the lower device (e.g. in a qdisc), the metadata_dst is freed while
references are still held.
Use dst_release() instead, which correctly decrements the refcount
and only frees the object when all references are dropped. The dst
subsystem already handles metadata_dst cleanup in dst_destroy() when
DST_METADATA is set.
Other drivers sharing this pattern (nfp, airoha, bnxt) already use
dst_release() for their metadata_dst lifecycle. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/net: populate CONNECT filter fields for 24-byte sockaddr_in6
io_connect_bpf_populate() fills connect.port and connect.v6_addr for
AF_INET6 only when addr_len >= sizeof(struct sockaddr_in6), i.e. 28
bytes.
The IPv6 connect paths accept SIN6_LEN_RFC2133 (24 bytes), which
already holds sin6_port and sin6_addr. io_connect() passes addr_len to
the socket layer unchanged.
At addr_len 24 the filter sees family AF_INET6 with port and address
zero, while the kernel connects to the real destination. A filter that
denies an IPv6 port or address is bypassed. Denying connect.port == P
rejects [::1]:P with -EACCES at addr_len 28 but connects at addr_len 24.
Use SIN6_LEN_RFC2133 as the threshold. sin6_scope_id stays zero when
absent.
The threshold mismatch was found by an AI coding assistant (Claude Code)
comparing this hook against the net/ipv6 length checks on my
instructions; it also drafted the reproducer and this patch. I verified
the bypass and the fix in a VM on 7.3-rc6 and that 7.2 has the same
code. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_gre: remove obsolete ERSPAN PMTU update
A tc tunnel_key action can attach a METADATA_IP_TUNNEL dst to an skb,
and mirred can redirect it to a native ip6erspan device. The legacy PMTU
update in ip6erspan_tunnel_xmit() treats that metadata dst as a route.
Since it has no output device, dst_dev(dst)->mtu dereferences NULL.
On v7.2 with KASAN, an initial UID/GID 65534 process with CapEff 0 used
self-created user and network namespaces to trigger:
KASAN: null-ptr-deref
RIP: ip6erspan_tunnel_xmit+0x10fc/0x2cc0
Kernel panic - not syncing: Fatal exception in interrupt
The update is obsolete. Commit fe1a4ca0a2b7 ("ip6_gre: process toobig
in a better way") changed IPv6 GRE Too Big handling to update the
underlay route and removed the equivalent block from __gre6_xmit().
ip6_tnl_xmit() then propagates the underlay PMTU to the overlay route.
Remove the stale ERSPAN copy and its now-unused dst variable. This
eliminates the metadata-dst dereference and keeps ERSPAN aligned with
IPv6 GRE PMTU handling. |
| In the Linux kernel, the following vulnerability has been resolved:
KEYS: Fix add_key() race with keyring restriction
__key_create_or_update() snapshots keyring->restrict_link before taking
the destination keyring's semaphore. keyring_restrict() installs a
restriction while holding that semaphore.
This allows a writer to observe no restriction, wait for the keyring
owner to install a reject-all restriction and return successfully, and
then link a key using the stale NULL snapshot. The writer only needs
write permission on the destination keyring.
Move the restrict_link read after __key_link_lock() and
__key_link_begin(). The read and the subsequent restriction check are
then serialized with restriction installation by keyring->sem.
The race was reproduced on v7.2.8 in 19 executions where restriction
installation returned before the link completed. All 19 linked the key
despite the reject-all restriction. With this change, 312 executions
reached the same ordering and every add_key() call failed with -EPERM.
The issue was found by manual concurrency analysis assisted by AI-based
analysis and independently verified with a QEMU reproducer and kernel
instrumentation. |
| In the Linux kernel, the following vulnerability has been resolved:
memstick: rtsx_usb_ms: complete requests after eject instead of dropping them
memstick_check() can pass its host->removing check just before
rtsx_usb_ms_drv_remove() sets eject/removing. Its next request is then
silently dropped: rtsx_usb_ms_request() skips schedule_work() once eject
is set, and drv_remove's cancel_work_sync() can also cancel a queued
handle_req before it picks the request up. Nobody completes
card->mrq_complete.
Once memstick core waits for requests without a timeout ("memstick: core:
wait for request completion before freeing card"), this hangs removal:
memstick_check() never returns and memstick_remove_host() blocks in
flush_workqueue():
INFO: task kworker/u10:3:65 blocked for more than 20 seconds.
Workqueue: kmemstick memstick_check
__wait_for_common
memstick_check
INFO: task kworker/1:1:33 blocked for more than 20 seconds.
Workqueue: usb_hub_wq hub_event
__flush_workqueue
memstick_remove_host
rtsx_usb_ms_drv_remove
Never drop a request. rtsx_usb_ms_request() always schedules handle_req,
and handle_req fails requests with -ENOMEDIUM once eject is set, without
touching the device. drv_remove flushes handle_req instead of cancelling
it, and cancels it only after memstick_remove_host(), when no new
request can arrive, so it cannot run on a freed host.
The host_mutex drain in drv_remove is removed: handle_req always leaves
host->req NULL when it finishes, so the drain never had anything to do,
and it would now race with handle_req. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: fix reading free memory in do_resume
When do_resume calls dm_table_get_mode(new_map), the call is done without
holding any locks (it only holds a reference to the md). It may be
possible that another concurrent ioctl on the same device will swap table
after dm_swap_table and before dm_table_get_mode. In this case,
dm_table_get_mode(new_map) reads freed memory.
This race condition was triggered by syzbot.
This commit fixes the race by reading mode of the new table before
dm_swap_table. Note that new_map is also passed to dm_ima_need_measure,
but this function doesn't attempt to dereference it, so this call should
be safe.
Note that this is not a security bug because only root can trigger it and
the commonly used tools such as lvm or cryptsetup do not call the ioctls
concurrently, so that they can't trigger it acceidentally. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: mtk-sd: Cancel request timeout work on remove
The driver queues req_timeout while a request is active.
msdc_request_done() uses cancel_delayed_work(), which does not wait for
a timeout callback that has already started.
The timeout callback calls mmc_request_done(), which wakes the request
waiter, and then continues to use host->dev_comp and check the SDIO IRQ.
During unbind, msdc_drv_remove() can return and the managed mmc_host can
be freed before the callback finishes.
KASAN reported use-after-free accesses in msdc_request_done() and
msdc_recheck_sdio_irq() in each of three unbind tests. The same tests
completed without a kernel diagnostic after this change.
Call cancel_delayed_work_sync() after mmc_remove_host() has stopped new
requests and before the driver releases the host resources. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sparx5: free the matchall entry on destroy
sparx5_tc_matchall_replace() allocates a struct sparx5_mall_entry for
every offloaded matchall filter and adds it to sparx5->mall_entries.
sparx5_tc_matchall_destroy() removes the entry from the list, but never
frees it, so the entry of every deleted mirror and goto matchall filter
is leaked.
Free the entry after unlinking it.
The leak was discovered by an AI code review agent, and reproduced with
kmemleak on a lan969x EV board (EV23X71A) by repeatedly adding and
deleting matchall mirror and goto filters. With the fix, kmemleak no
longer reports the leak. |
| In the Linux kernel, the following vulnerability has been resolved:
net: team: stop reusing skb after queue override
A nonzero dev_queue_xmit() result does not return ownership of the skb.
When an override port's qdisc drops it, the queue override helper used to
try another port or the mode transmit op with the freed skb.
Return the handoff decision separately from transmit success. Select only
the first override port under RCU and stop after handing it the skb,
regardless of the lower transmit result. Keep the existing success and
drop accounting.
BUG: KASAN: slab-use-after-free in sk_skb_reason_drop
Write of size 4 by task poc/5040
sk_skb_reason_drop (net/core/skbuff.c:1240)
dev_kfree_skb_any_reason (net/core/dev.c:3470)
ab_transmit (drivers/net/team/team_mode_activebackup.c:49)
team_xmit (drivers/net/team/team_core.c:1849)
__dev_direct_xmit (net/core/dev.c:4934)
Freed by task 5040:
__tcf_kfree_skb_list (net/sched/sch_generic.c:43)
__dev_queue_xmit (net/core/dev.c:4831)
team_xmit (drivers/net/team/team_core.c:1846)
Kernel panic - not syncing: KASAN: panic_on_warn set ... |
| In the Linux kernel, the following vulnerability has been resolved:
net: team: free skb when broadcast has no txable port
bc_transmit() sends the original skb through the last txable port.
When no port is txable, it returns false without consuming the skb, but
team_xmit() still returns NETDEV_TX_OK. AF_PACKET sends then retain the
skb and its socket write-memory charge.
A TX-enabled, link-down port keeps the broadcast transmit op installed.
Carrier can stay up through a second link-up, TX-disabled port or be
forced on by userspace. Free the original skb on the no-port path while
leaving the existing drop accounting intact.
Discovered by Sashiko during review of previous commit. |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: fix soft lockup in the netlink flow dump
A production compute node carrying a few thousand datapath flows hit a
soft lockup inside a single netlink flow dump and panicked.
ovs_flow_cmd_dump() calls ovs_flow_stats_get() for every flow it
emits, and that releases stats->lock with spin_unlock_bh() once per
CPU that has touched the flow. Every release is a local_bh_enable(),
and each one runs the pending softirq backlog in the dumping thread's
own context.
The skb bounds the flows one callback emits, but not the softirq work
it absorbs. On a CPU that carries the box's packet load the backlog
refills as fast as it drains, so the dumping thread becomes that CPU's
softirq engine. It never sleeps and it has no reschedule point, so
under voluntary preemption nothing can take the CPU away from it:
neither the ksoftirqd the kernel woke to take the work over, nor the
stopper thread the softlockup detector dispatches to refresh its
timestamp.
Hold BH off across the whole callback instead, the way
ctnetlink_dump_table() does, so the nested spin_unlock_bh() stop
draining softirqs. The loop already runs under rcu_read_lock() and
cannot sleep. What it gives up is preemption under CONFIG_PREEMPT,
since a BH-off region is not preemptible outside PREEMPT_RT. The
region stays short: the skb caps the flows one callback emits, and
empty buckets cost no skb space but are each visited once per dump, as
the cursor only moves forward. The table grows on insert and shrinks
only on flush, so the walk is bounded by the largest flow count the
datapath has held. The softirq backlog the callback used to absorb has
no bound at all. |
