| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: firewire-digi00x: prevent potential use after free
This code was supposed to return an error code if init_stream()
failed, but it instead freed dg00x->rx_stream and returned success.
This potentially leads to a use after free. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Add preempt_count_{sub,add} into btf id deny list
The recursion check in __bpf_prog_enter* and __bpf_prog_exit*
leave preempt_count_{sub,add} unprotected. When attaching trampoline to
them we get panic as follows,
[ 867.843050] BUG: TASK stack guard page was hit at 0000000009d325cf (stack is 0000000046a46a15..00000000537e7b28)
[ 867.843064] stack guard page: 0000 [#1] PREEMPT SMP NOPTI
[ 867.843067] CPU: 8 PID: 11009 Comm: trace Kdump: loaded Not tainted 6.2.0+ #4
[ 867.843100] Call Trace:
[ 867.843101] <TASK>
[ 867.843104] asm_exc_int3+0x3a/0x40
[ 867.843108] RIP: 0010:preempt_count_sub+0x1/0xa0
[ 867.843135] __bpf_prog_enter_recur+0x17/0x90
[ 867.843148] bpf_trampoline_6442468108_0+0x2e/0x1000
[ 867.843154] ? preempt_count_sub+0x1/0xa0
[ 867.843157] preempt_count_sub+0x5/0xa0
[ 867.843159] ? migrate_enable+0xac/0xf0
[ 867.843164] __bpf_prog_exit_recur+0x2d/0x40
[ 867.843168] bpf_trampoline_6442468108_0+0x55/0x1000
...
[ 867.843788] preempt_count_sub+0x5/0xa0
[ 867.843793] ? migrate_enable+0xac/0xf0
[ 867.843829] __bpf_prog_exit_recur+0x2d/0x40
[ 867.843837] BUG: IRQ stack guard page was hit at 0000000099bd8228 (stack is 00000000b23e2bc4..000000006d95af35)
[ 867.843841] BUG: IRQ stack guard page was hit at 000000005ae07924 (stack is 00000000ffd69623..0000000014eb594c)
[ 867.843843] BUG: IRQ stack guard page was hit at 00000000028320f0 (stack is 00000000034b6438..0000000078d1bcec)
[ 867.843842] bpf_trampoline_6442468108_0+0x55/0x1000
...
That is because in __bpf_prog_exit_recur, the preempt_count_{sub,add} are
called after prog->active is decreased.
Fixing this by adding these two functions into btf ids deny list. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix DMA-API call trace on NVMe LS requests
The following message and call trace was seen with debug kernels:
DMA-API: qla2xxx 0000:41:00.0: device driver failed to check map
error [device address=0x00000002a3ff38d8] [size=1024 bytes] [mapped as
single]
WARNING: CPU: 0 PID: 2930 at kernel/dma/debug.c:1017
check_unmap+0xf42/0x1990
Call Trace:
debug_dma_unmap_page+0xc9/0x100
qla_nvme_ls_unmap+0x141/0x210 [qla2xxx]
Remove DMA mapping from the driver altogether, as it is already done by FC
layer. This prevents the warning. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rcar_fdp1: Fix refcount leak in probe and remove function
rcar_fcp_get() take reference, which should be balanced with
rcar_fcp_put(). Add missing rcar_fcp_put() in fdp1_remove and
the error paths of fdp1_probe() to fix this.
[hverkuil: resolve merge conflict, remove() is now void] |
| In the Linux kernel, the following vulnerability has been resolved:
usb: rndis_host: Secure rndis_query check against int overflow
Variables off and len typed as uint32 in rndis_query function
are controlled by incoming RNDIS response message thus their
value may be manipulated. Setting off to a unexpectetly large
value will cause the sum with len and 8 to overflow and pass
the implemented validation step. Consequently the response
pointer will be referring to a location past the expected
buffer boundaries allowing information leakage e.g. via
RNDIS_OID_802_3_PERMANENT_ADDRESS OID. |
| In the Linux kernel, the following vulnerability has been resolved:
kcm: Fix memory leak in error path of kcm_sendmsg()
syzbot reported a memory leak like below:
BUG: memory leak
unreferenced object 0xffff88810b088c00 (size 240):
comm "syz-executor186", pid 5012, jiffies 4294943306 (age 13.680s)
hex dump (first 32 bytes):
00 89 08 0b 81 88 ff ff 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff83e5d5ff>] __alloc_skb+0x1ef/0x230 net/core/skbuff.c:634
[<ffffffff84606e59>] alloc_skb include/linux/skbuff.h:1289 [inline]
[<ffffffff84606e59>] kcm_sendmsg+0x269/0x1050 net/kcm/kcmsock.c:815
[<ffffffff83e479c6>] sock_sendmsg_nosec net/socket.c:725 [inline]
[<ffffffff83e479c6>] sock_sendmsg+0x56/0xb0 net/socket.c:748
[<ffffffff83e47f55>] ____sys_sendmsg+0x365/0x470 net/socket.c:2494
[<ffffffff83e4c389>] ___sys_sendmsg+0xc9/0x130 net/socket.c:2548
[<ffffffff83e4c536>] __sys_sendmsg+0xa6/0x120 net/socket.c:2577
[<ffffffff84ad7bb8>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff84ad7bb8>] do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
[<ffffffff84c0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
In kcm_sendmsg(), kcm_tx_msg(head)->last_skb is used as a cursor to append
newly allocated skbs to 'head'. If some bytes are copied, an error occurred,
and jumped to out_error label, 'last_skb' is left unmodified. A later
kcm_sendmsg() will use an obsoleted 'last_skb' reference, corrupting the
'head' frag_list and causing the leak.
This patch fixes this issue by properly updating the last allocated skb in
'last_skb'. |
| In the Linux kernel, the following vulnerability has been resolved:
nfp: clean mc addresses in application firmware when closing port
When moving devices from one namespace to another, mc addresses are
cleaned in software while not removed from application firmware. Thus
the mc addresses are remained and will cause resource leak.
Now use `__dev_mc_unsync` to clean mc addresses when closing port. |
| In the Linux kernel, the following vulnerability has been resolved:
autofs: fix memory leak of waitqueues in autofs_catatonic_mode
Syzkaller reports a memory leak:
BUG: memory leak
unreferenced object 0xffff88810b279e00 (size 96):
comm "syz-executor399", pid 3631, jiffies 4294964921 (age 23.870s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 08 9e 27 0b 81 88 ff ff ..........'.....
08 9e 27 0b 81 88 ff ff 00 00 00 00 00 00 00 00 ..'.............
backtrace:
[<ffffffff814cfc90>] kmalloc_trace+0x20/0x90 mm/slab_common.c:1046
[<ffffffff81bb75ca>] kmalloc include/linux/slab.h:576 [inline]
[<ffffffff81bb75ca>] autofs_wait+0x3fa/0x9a0 fs/autofs/waitq.c:378
[<ffffffff81bb88a7>] autofs_do_expire_multi+0xa7/0x3e0 fs/autofs/expire.c:593
[<ffffffff81bb8c33>] autofs_expire_multi+0x53/0x80 fs/autofs/expire.c:619
[<ffffffff81bb6972>] autofs_root_ioctl_unlocked+0x322/0x3b0 fs/autofs/root.c:897
[<ffffffff81bb6a95>] autofs_root_ioctl+0x25/0x30 fs/autofs/root.c:910
[<ffffffff81602a9c>] vfs_ioctl fs/ioctl.c:51 [inline]
[<ffffffff81602a9c>] __do_sys_ioctl fs/ioctl.c:870 [inline]
[<ffffffff81602a9c>] __se_sys_ioctl fs/ioctl.c:856 [inline]
[<ffffffff81602a9c>] __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:856
[<ffffffff84608225>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff84608225>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
[<ffffffff84800087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
autofs_wait_queue structs should be freed if their wait_ctr becomes zero.
Otherwise they will be lost.
In this case an AUTOFS_IOC_EXPIRE_MULTI ioctl is done, then a new
waitqueue struct is allocated in autofs_wait(), its initial wait_ctr
equals 2. After that wait_event_killable() is interrupted (it returns
-ERESTARTSYS), so that 'wq->name.name == NULL' condition may be not
satisfied. Actually, this condition can be satisfied when
autofs_wait_release() or autofs_catatonic_mode() is called and, what is
also important, wait_ctr is decremented in those places. Upon the exit of
autofs_wait(), wait_ctr is decremented to 1. Then the unmounting process
begins: kill_sb calls autofs_catatonic_mode(), which should have freed the
waitqueues, but it only decrements its usage counter to zero which is not
a correct behaviour.
edit:imk
This description is of course not correct. The umount performed as a result
of an expire is a umount of a mount that has been automounted, it's not the
autofs mount itself. They happen independently, usually after everything
mounted within the autofs file system has been expired away. If everything
hasn't been expired away the automount daemon can still exit leaving mounts
in place. But expires done in both cases will result in a notification that
calls autofs_wait_release() with a result status. The problem case is the
summary execution of of the automount daemon. In this case any waiting
processes won't be woken up until either they are terminated or the mount
is umounted.
end edit: imk
So in catatonic mode we should free waitqueues which counter becomes zero.
edit: imk
Initially I was concerned that the calling of autofs_wait_release() and
autofs_catatonic_mode() was not mutually exclusive but that can't be the
case (obviously) because the queue entry (or entries) is removed from the
list when either of these two functions are called. Consequently the wait
entry will be freed by only one of these functions or by the woken process
in autofs_wait() depending on the order of the calls.
end edit: imk |
| In the Linux kernel, the following vulnerability has been resolved:
serial: sprd: Fix DMA buffer leak issue
Release DMA buffer when _probe() returns failure to avoid memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/type1: fix cap_migration information leak
Fix an information leak where an uninitialized hole in struct
vfio_iommu_type1_info_cap_migration on the stack is exposed to userspace.
The definition of struct vfio_iommu_type1_info_cap_migration contains a hole as
shown in this pahole(1) output:
struct vfio_iommu_type1_info_cap_migration {
struct vfio_info_cap_header header; /* 0 8 */
__u32 flags; /* 8 4 */
/* XXX 4 bytes hole, try to pack */
__u64 pgsize_bitmap; /* 16 8 */
__u64 max_dirty_bitmap_size; /* 24 8 */
/* size: 32, cachelines: 1, members: 4 */
/* sum members: 28, holes: 1, sum holes: 4 */
/* last cacheline: 32 bytes */
};
The cap_mig variable is filled in without initializing the hole:
static int vfio_iommu_migration_build_caps(struct vfio_iommu *iommu,
struct vfio_info_cap *caps)
{
struct vfio_iommu_type1_info_cap_migration cap_mig;
cap_mig.header.id = VFIO_IOMMU_TYPE1_INFO_CAP_MIGRATION;
cap_mig.header.version = 1;
cap_mig.flags = 0;
/* support minimum pgsize */
cap_mig.pgsize_bitmap = (size_t)1 << __ffs(iommu->pgsize_bitmap);
cap_mig.max_dirty_bitmap_size = DIRTY_BITMAP_SIZE_MAX;
return vfio_info_add_capability(caps, &cap_mig.header, sizeof(cap_mig));
}
The structure is then copied to a temporary location on the heap. At this point
it's already too late and ioctl(VFIO_IOMMU_GET_INFO) copies it to userspace
later:
int vfio_info_add_capability(struct vfio_info_cap *caps,
struct vfio_info_cap_header *cap, size_t size)
{
struct vfio_info_cap_header *header;
header = vfio_info_cap_add(caps, size, cap->id, cap->version);
if (IS_ERR(header))
return PTR_ERR(header);
memcpy(header + 1, cap + 1, size - sizeof(*header));
return 0;
}
This issue was found by code inspection. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/hyperv: Disable IBT when hypercall page lacks ENDBR instruction
On hardware that supports Indirect Branch Tracking (IBT), Hyper-V VMs
with ConfigVersion 9.3 or later support IBT in the guest. However,
current versions of Hyper-V have a bug in that there's not an ENDBR64
instruction at the beginning of the hypercall page. Since hypercalls are
made with an indirect call to the hypercall page, all hypercall attempts
fail with an exception and Linux panics.
A Hyper-V fix is in progress to add ENDBR64. But guard against the Linux
panic by clearing X86_FEATURE_IBT if the hypercall page doesn't start
with ENDBR. The VM will boot and run without IBT.
If future Linux 32-bit kernels were to support IBT, additional hypercall
page hackery would be needed to make IBT work for such kernels in a
Hyper-V VM. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio: Fix NULL pointer dereference caused by uninitialized group->iommufd
group->iommufd is not initialized for the iommufd_ctx_put()
[20018.331541] BUG: kernel NULL pointer dereference, address: 0000000000000000
[20018.377508] RIP: 0010:iommufd_ctx_put+0x5/0x10 [iommufd]
...
[20018.476483] Call Trace:
[20018.479214] <TASK>
[20018.481555] vfio_group_fops_unl_ioctl+0x506/0x690 [vfio]
[20018.487586] __x64_sys_ioctl+0x6a/0xb0
[20018.491773] ? trace_hardirqs_on+0xc5/0xe0
[20018.496347] do_syscall_64+0x67/0x90
[20018.500340] entry_SYSCALL_64_after_hwframe+0x4b/0xb5 |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: xiic: xiic_xfer(): Fix runtime PM leak on error path
The xiic_xfer() function gets a runtime PM reference when the function is
entered. This reference is released when the function is exited. There is
currently one error path where the function exits directly, which leads to
a leak of the runtime PM reference.
Make sure that this error path also releases the runtime PM reference. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: stricter state check in mptcp_worker
As reported by Christoph, the mptcp protocol can run the
worker when the relevant msk socket is in an unexpected state:
connect()
// incoming reset + fastclose
// the mptcp worker is scheduled
mptcp_disconnect()
// msk is now CLOSED
listen()
mptcp_worker()
Leading to the following splat:
divide error: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 21 Comm: kworker/1:0 Not tainted 6.3.0-rc1-gde5e8fd0123c #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
Workqueue: events mptcp_worker
RIP: 0010:__tcp_select_window+0x22c/0x4b0 net/ipv4/tcp_output.c:3018
RSP: 0018:ffffc900000b3c98 EFLAGS: 00010293
RAX: 000000000000ffd7 RBX: 000000000000ffd7 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8214ce97 RDI: 0000000000000004
RBP: 000000000000ffd7 R08: 0000000000000004 R09: 0000000000010000
R10: 000000000000ffd7 R11: ffff888005afa148 R12: 000000000000ffd7
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88803ed00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000405270 CR3: 000000003011e006 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
tcp_select_window net/ipv4/tcp_output.c:262 [inline]
__tcp_transmit_skb+0x356/0x1280 net/ipv4/tcp_output.c:1345
tcp_transmit_skb net/ipv4/tcp_output.c:1417 [inline]
tcp_send_active_reset+0x13e/0x320 net/ipv4/tcp_output.c:3459
mptcp_check_fastclose net/mptcp/protocol.c:2530 [inline]
mptcp_worker+0x6c7/0x800 net/mptcp/protocol.c:2705
process_one_work+0x3bd/0x950 kernel/workqueue.c:2390
worker_thread+0x5b/0x610 kernel/workqueue.c:2537
kthread+0x138/0x170 kernel/kthread.c:376
ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308
</TASK>
This change addresses the issue explicitly checking for bad states
before running the mptcp worker. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: EC: Fix oops when removing custom query handlers
When removing custom query handlers, the handler might still
be used inside the EC query workqueue, causing a kernel oops
if the module holding the callback function was already unloaded.
Fix this by flushing the EC query workqueue when removing
custom query handlers.
Tested on a Acer Travelmate 4002WLMi |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: tx-macro: Fix for KASAN: slab-out-of-bounds
When we run syzkaller we get below Out of Bound.
"KASAN: slab-out-of-bounds Read in regcache_flat_read"
Below is the backtrace of the issue:
dump_backtrace+0x0/0x4c8
show_stack+0x34/0x44
dump_stack_lvl+0xd8/0x118
print_address_description+0x30/0x2d8
kasan_report+0x158/0x198
__asan_report_load4_noabort+0x44/0x50
regcache_flat_read+0x10c/0x110
regcache_read+0xf4/0x180
_regmap_read+0xc4/0x278
_regmap_update_bits+0x130/0x290
regmap_update_bits_base+0xc0/0x15c
snd_soc_component_update_bits+0xa8/0x22c
snd_soc_component_write_field+0x68/0xd4
tx_macro_digital_mute+0xec/0x140
Actually There is no need to have decimator with 32 bits.
By limiting the variable with short type u8 issue is resolved. |
| In the Linux kernel, the following vulnerability has been resolved:
rcuscale: Move rcu_scale_writer() schedule_timeout_uninterruptible() to _idle()
The rcuscale.holdoff module parameter can be used to delay the start
of rcu_scale_writer() kthread. However, the hung-task timeout will
trigger when the timeout specified by rcuscale.holdoff is greater than
hung_task_timeout_secs:
runqemu kvm nographic slirp qemuparams="-smp 4 -m 2048M"
bootparams="rcuscale.shutdown=0 rcuscale.holdoff=300"
[ 247.071753] INFO: task rcu_scale_write:59 blocked for more than 122 seconds.
[ 247.072529] Not tainted 6.4.0-rc1-00134-gb9ed6de8d4ff #7
[ 247.073400] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 247.074331] task:rcu_scale_write state:D stack:30144 pid:59 ppid:2 flags:0x00004000
[ 247.075346] Call Trace:
[ 247.075660] <TASK>
[ 247.075965] __schedule+0x635/0x1280
[ 247.076448] ? __pfx___schedule+0x10/0x10
[ 247.076967] ? schedule_timeout+0x2dc/0x4d0
[ 247.077471] ? __pfx_lock_release+0x10/0x10
[ 247.078018] ? enqueue_timer+0xe2/0x220
[ 247.078522] schedule+0x84/0x120
[ 247.078957] schedule_timeout+0x2e1/0x4d0
[ 247.079447] ? __pfx_schedule_timeout+0x10/0x10
[ 247.080032] ? __pfx_rcu_scale_writer+0x10/0x10
[ 247.080591] ? __pfx_process_timeout+0x10/0x10
[ 247.081163] ? __pfx_sched_set_fifo_low+0x10/0x10
[ 247.081760] ? __pfx_rcu_scale_writer+0x10/0x10
[ 247.082287] rcu_scale_writer+0x6b1/0x7f0
[ 247.082773] ? mark_held_locks+0x29/0xa0
[ 247.083252] ? __pfx_rcu_scale_writer+0x10/0x10
[ 247.083865] ? __pfx_rcu_scale_writer+0x10/0x10
[ 247.084412] kthread+0x179/0x1c0
[ 247.084759] ? __pfx_kthread+0x10/0x10
[ 247.085098] ret_from_fork+0x2c/0x50
[ 247.085433] </TASK>
This commit therefore replaces schedule_timeout_uninterruptible() with
schedule_timeout_idle(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Silence a warning in btf_type_id_size()
syzbot reported a warning in [1] with the following stacktrace:
WARNING: CPU: 0 PID: 5005 at kernel/bpf/btf.c:1988 btf_type_id_size+0x2d9/0x9d0 kernel/bpf/btf.c:1988
...
RIP: 0010:btf_type_id_size+0x2d9/0x9d0 kernel/bpf/btf.c:1988
...
Call Trace:
<TASK>
map_check_btf kernel/bpf/syscall.c:1024 [inline]
map_create+0x1157/0x1860 kernel/bpf/syscall.c:1198
__sys_bpf+0x127f/0x5420 kernel/bpf/syscall.c:5040
__do_sys_bpf kernel/bpf/syscall.c:5162 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5160 [inline]
__x64_sys_bpf+0x79/0xc0 kernel/bpf/syscall.c:5160
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
With the following btf
[1] DECL_TAG 'a' type_id=4 component_idx=-1
[2] PTR '(anon)' type_id=0
[3] TYPE_TAG 'a' type_id=2
[4] VAR 'a' type_id=3, linkage=static
and when the bpf_attr.btf_key_type_id = 1 (DECL_TAG),
the following WARN_ON_ONCE in btf_type_id_size() is triggered:
if (WARN_ON_ONCE(!btf_type_is_modifier(size_type) &&
!btf_type_is_var(size_type)))
return NULL;
Note that 'return NULL' is the correct behavior as we don't want
a DECL_TAG type to be used as a btf_{key,value}_type_id even
for the case like 'DECL_TAG -> STRUCT'. So there
is no correctness issue here, we just want to silence warning.
To silence the warning, I added DECL_TAG as one of kinds in
btf_type_nosize() which will cause btf_type_id_size() returning
NULL earlier without the warning.
[1] https://lore.kernel.org/bpf/000000000000e0df8d05fc75ba86@google.com/ |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Add check for kmemdup
Since the kmemdup may return NULL pointer,
it should be better to add check for the return value
in order to avoid NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/srpt: Add a check for valid 'mad_agent' pointer
When unregistering MAD agent, srpt module has a non-null check
for 'mad_agent' pointer before invoking ib_unregister_mad_agent().
This check can pass if 'mad_agent' variable holds an error value.
The 'mad_agent' can have an error value for a short window when
srpt_add_one() and srpt_remove_one() is executed simultaneously.
In srpt module, added a valid pointer check for 'sport->mad_agent'
before unregistering MAD agent.
This issue can hit when RoCE driver unregisters ib_device
Stack Trace:
------------
BUG: kernel NULL pointer dereference, address: 000000000000004d
PGD 145003067 P4D 145003067 PUD 2324fe067 PMD 0
Oops: 0002 [#1] PREEMPT SMP NOPTI
CPU: 10 PID: 4459 Comm: kworker/u80:0 Kdump: loaded Tainted: P
Hardware name: Dell Inc. PowerEdge R640/06NR82, BIOS 2.5.4 01/13/2020
Workqueue: bnxt_re bnxt_re_task [bnxt_re]
RIP: 0010:_raw_spin_lock_irqsave+0x19/0x40
Call Trace:
ib_unregister_mad_agent+0x46/0x2f0 [ib_core]
IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
? __schedule+0x20b/0x560
srpt_unregister_mad_agent+0x93/0xd0 [ib_srpt]
srpt_remove_one+0x20/0x150 [ib_srpt]
remove_client_context+0x88/0xd0 [ib_core]
bond0: (slave p2p1): link status definitely up, 100000 Mbps full duplex
disable_device+0x8a/0x160 [ib_core]
bond0: active interface up!
? kernfs_name_hash+0x12/0x80
(NULL device *): Bonding Info Received: rdev: 000000006c0b8247
__ib_unregister_device+0x42/0xb0 [ib_core]
(NULL device *): Master: mode: 4 num_slaves:2
ib_unregister_device+0x22/0x30 [ib_core]
(NULL device *): Slave: id: 105069936 name:p2p1 link:0 state:0
bnxt_re_stopqps_and_ib_uninit+0x83/0x90 [bnxt_re]
bnxt_re_alloc_lag+0x12e/0x4e0 [bnxt_re] |
