| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ice: ice_adapter: release xa entry on adapter allocation failure
When ice_adapter_new() fails, the reserved XArray entry created by
xa_insert() is not released. This causes subsequent insertions at
the same index to return -EBUSY, potentially leading to
NULL pointer dereferences.
Reorder the operations as suggested by Przemek Kitszel:
1. Check if adapter already exists (xa_load)
2. Reserve the XArray slot (xa_reserve)
3. Allocate the adapter (ice_adapter_new)
4. Store the adapter (xa_store) |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: lan78xx: Fix lost EEPROM read timeout error(-ETIMEDOUT) in lan78xx_read_raw_eeprom
Syzbot reported read of uninitialized variable BUG with following call stack.
lan78xx 8-1:1.0 (unnamed net_device) (uninitialized): EEPROM read operation timeout
=====================================================
BUG: KMSAN: uninit-value in lan78xx_read_eeprom drivers/net/usb/lan78xx.c:1095 [inline]
BUG: KMSAN: uninit-value in lan78xx_init_mac_address drivers/net/usb/lan78xx.c:1937 [inline]
BUG: KMSAN: uninit-value in lan78xx_reset+0x999/0x2cd0 drivers/net/usb/lan78xx.c:3241
lan78xx_read_eeprom drivers/net/usb/lan78xx.c:1095 [inline]
lan78xx_init_mac_address drivers/net/usb/lan78xx.c:1937 [inline]
lan78xx_reset+0x999/0x2cd0 drivers/net/usb/lan78xx.c:3241
lan78xx_bind+0x711/0x1690 drivers/net/usb/lan78xx.c:3766
lan78xx_probe+0x225c/0x3310 drivers/net/usb/lan78xx.c:4707
Local variable sig.i.i created at:
lan78xx_read_eeprom drivers/net/usb/lan78xx.c:1092 [inline]
lan78xx_init_mac_address drivers/net/usb/lan78xx.c:1937 [inline]
lan78xx_reset+0x77e/0x2cd0 drivers/net/usb/lan78xx.c:3241
lan78xx_bind+0x711/0x1690 drivers/net/usb/lan78xx.c:3766
The function lan78xx_read_raw_eeprom failed to properly propagate EEPROM
read timeout errors (-ETIMEDOUT). In the fallthrough path, it first
attempted to restore the pin configuration for LED outputs and then
returned only the status of that restore operation, discarding the
original timeout error.
As a result, callers could mistakenly treat the data buffer as valid
even though the EEPROM read had actually timed out with no data or partial
data.
To fix this, handle errors in restoring the LED pin configuration separately.
If the restore succeeds, return any prior EEPROM timeout error correctly
to the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
pwm: berlin: Fix wrong register in suspend/resume
The 'enable' register should be BERLIN_PWM_EN rather than
BERLIN_PWM_ENABLE, otherwise, the driver accesses wrong address, there
will be cpu exception then kernel panic during suspend/resume. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix kfd process ref leaking when userptr unmapping
kfd_lookup_process_by_pid hold the kfd process reference to ensure it
doesn't get destroyed while sending the segfault event to user space.
Calling kfd_lookup_process_by_pid as function parameter leaks the kfd
process refcount and miss the NULL pointer check if app process is
already destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gud: Fix UBSAN warning
UBSAN complains about invalid value for bool:
[ 101.165172] [drm] Initialized gud 1.0.0 20200422 for 2-3.2:1.0 on minor 1
[ 101.213360] gud 2-3.2:1.0: [drm] fb1: guddrmfb frame buffer device
[ 101.213426] usbcore: registered new interface driver gud
[ 101.989431] ================================================================================
[ 101.989441] UBSAN: invalid-load in linux/include/linux/iosys-map.h:253:9
[ 101.989447] load of value 121 is not a valid value for type '_Bool'
[ 101.989451] CPU: 1 PID: 455 Comm: kworker/1:6 Not tainted 5.18.0-rc5-gud-5.18-rc5 #3
[ 101.989456] Hardware name: Hewlett-Packard HP EliteBook 820 G1/1991, BIOS L71 Ver. 01.44 04/12/2018
[ 101.989459] Workqueue: events_long gud_flush_work [gud]
[ 101.989471] Call Trace:
[ 101.989474] <TASK>
[ 101.989479] dump_stack_lvl+0x49/0x5f
[ 101.989488] dump_stack+0x10/0x12
[ 101.989493] ubsan_epilogue+0x9/0x3b
[ 101.989498] __ubsan_handle_load_invalid_value.cold+0x44/0x49
[ 101.989504] dma_buf_vmap.cold+0x38/0x3d
[ 101.989511] ? find_busiest_group+0x48/0x300
[ 101.989520] drm_gem_shmem_vmap+0x76/0x1b0 [drm_shmem_helper]
[ 101.989528] drm_gem_shmem_object_vmap+0x9/0xb [drm_shmem_helper]
[ 101.989535] drm_gem_vmap+0x26/0x60 [drm]
[ 101.989594] drm_gem_fb_vmap+0x47/0x150 [drm_kms_helper]
[ 101.989630] gud_prep_flush+0xc1/0x710 [gud]
[ 101.989639] ? _raw_spin_lock+0x17/0x40
[ 101.989648] gud_flush_work+0x1e0/0x430 [gud]
[ 101.989653] ? __switch_to+0x11d/0x470
[ 101.989664] process_one_work+0x21f/0x3f0
[ 101.989673] worker_thread+0x200/0x3e0
[ 101.989679] ? rescuer_thread+0x390/0x390
[ 101.989684] kthread+0xfd/0x130
[ 101.989690] ? kthread_complete_and_exit+0x20/0x20
[ 101.989696] ret_from_fork+0x22/0x30
[ 101.989706] </TASK>
[ 101.989708] ================================================================================
The source of this warning is in iosys_map_clear() called from
dma_buf_vmap(). It conditionally sets values based on map->is_iomem. The
iosys_map variables are allocated uninitialized on the stack leading to
->is_iomem having all kinds of values and not only 0/1.
Fix this by zeroing the iosys_map variables. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Don't overflow during division for dirty tracking
If pgshift is 63 then BITS_PER_TYPE(*bitmap->bitmap) * pgsize will overflow
to 0 and this triggers divide by 0.
In this case the index should just be 0, so reorganize things to divide
by shift and avoid hitting any overflows. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: mcq: Fix &hwq->cq_lock deadlock issue
When ufshcd_err_handler() is executed, CQ event interrupt can enter waiting
for the same lock. This can happen in ufshcd_handle_mcq_cq_events() and
also in ufs_mtk_mcq_intr(). The following warning message will be generated
when &hwq->cq_lock is used in IRQ context with IRQ enabled. Use
ufshcd_mcq_poll_cqe_lock() with spin_lock_irqsave instead of spin_lock to
resolve the deadlock issue.
[name:lockdep&]WARNING: inconsistent lock state
[name:lockdep&]--------------------------------
[name:lockdep&]inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
[name:lockdep&]kworker/u16:4/260 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffffff8028444600 (&hwq->cq_lock){?.-.}-{2:2}, at:
ufshcd_mcq_poll_cqe_lock+0x30/0xe0
[name:lockdep&]{IN-HARDIRQ-W} state was registered at:
lock_acquire+0x17c/0x33c
_raw_spin_lock+0x5c/0x7c
ufshcd_mcq_poll_cqe_lock+0x30/0xe0
ufs_mtk_mcq_intr+0x60/0x1bc [ufs_mediatek_mod]
__handle_irq_event_percpu+0x140/0x3ec
handle_irq_event+0x50/0xd8
handle_fasteoi_irq+0x148/0x2b0
generic_handle_domain_irq+0x4c/0x6c
gic_handle_irq+0x58/0x134
call_on_irq_stack+0x40/0x74
do_interrupt_handler+0x84/0xe4
el1_interrupt+0x3c/0x78
<snip>
Possible unsafe locking scenario:
CPU0
----
lock(&hwq->cq_lock);
<Interrupt>
lock(&hwq->cq_lock);
*** DEADLOCK ***
2 locks held by kworker/u16:4/260:
[name:lockdep&]
stack backtrace:
CPU: 7 PID: 260 Comm: kworker/u16:4 Tainted: G S W OE
6.1.17-mainline-android14-2-g277223301adb #1
Workqueue: ufs_eh_wq_0 ufshcd_err_handler
Call trace:
dump_backtrace+0x10c/0x160
show_stack+0x20/0x30
dump_stack_lvl+0x98/0xd8
dump_stack+0x20/0x60
print_usage_bug+0x584/0x76c
mark_lock_irq+0x488/0x510
mark_lock+0x1ec/0x25c
__lock_acquire+0x4d8/0xffc
lock_acquire+0x17c/0x33c
_raw_spin_lock+0x5c/0x7c
ufshcd_mcq_poll_cqe_lock+0x30/0xe0
ufshcd_poll+0x68/0x1b0
ufshcd_transfer_req_compl+0x9c/0xc8
ufshcd_err_handler+0x3bc/0xea0
process_one_work+0x2f4/0x7e8
worker_thread+0x234/0x450
kthread+0x110/0x134
ret_from_fork+0x10/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
fscrypt: fix left shift underflow when inode->i_blkbits > PAGE_SHIFT
When simulating an nvme device on qemu with both logical_block_size and
physical_block_size set to 8 KiB, an error trace appears during
partition table reading at boot time. The issue is caused by
inode->i_blkbits being larger than PAGE_SHIFT, which leads to a left
shift of -1 and triggering a UBSAN warning.
[ 2.697306] ------------[ cut here ]------------
[ 2.697309] UBSAN: shift-out-of-bounds in fs/crypto/inline_crypt.c:336:37
[ 2.697311] shift exponent -1 is negative
[ 2.697315] CPU: 3 UID: 0 PID: 274 Comm: (udev-worker) Not tainted 6.18.0-rc2+ #34 PREEMPT(voluntary)
[ 2.697317] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 2.697320] Call Trace:
[ 2.697324] <TASK>
[ 2.697325] dump_stack_lvl+0x76/0xa0
[ 2.697340] dump_stack+0x10/0x20
[ 2.697342] __ubsan_handle_shift_out_of_bounds+0x1e3/0x390
[ 2.697351] bh_get_inode_and_lblk_num.cold+0x12/0x94
[ 2.697359] fscrypt_set_bio_crypt_ctx_bh+0x44/0x90
[ 2.697365] submit_bh_wbc+0xb6/0x190
[ 2.697370] block_read_full_folio+0x194/0x270
[ 2.697371] ? __pfx_blkdev_get_block+0x10/0x10
[ 2.697375] ? __pfx_blkdev_read_folio+0x10/0x10
[ 2.697377] blkdev_read_folio+0x18/0x30
[ 2.697379] filemap_read_folio+0x40/0xe0
[ 2.697382] filemap_get_pages+0x5ef/0x7a0
[ 2.697385] ? mmap_region+0x63/0xd0
[ 2.697389] filemap_read+0x11d/0x520
[ 2.697392] blkdev_read_iter+0x7c/0x180
[ 2.697393] vfs_read+0x261/0x390
[ 2.697397] ksys_read+0x71/0xf0
[ 2.697398] __x64_sys_read+0x19/0x30
[ 2.697399] x64_sys_call+0x1e88/0x26a0
[ 2.697405] do_syscall_64+0x80/0x670
[ 2.697410] ? __x64_sys_newfstat+0x15/0x20
[ 2.697414] ? x64_sys_call+0x204a/0x26a0
[ 2.697415] ? do_syscall_64+0xb8/0x670
[ 2.697417] ? irqentry_exit_to_user_mode+0x2e/0x2a0
[ 2.697420] ? irqentry_exit+0x43/0x50
[ 2.697421] ? exc_page_fault+0x90/0x1b0
[ 2.697422] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 2.697425] RIP: 0033:0x75054cba4a06
[ 2.697426] Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08
[ 2.697427] RSP: 002b:00007fff973723a0 EFLAGS: 00000202 ORIG_RAX: 0000000000000000
[ 2.697430] RAX: ffffffffffffffda RBX: 00005ea9a2c02760 RCX: 000075054cba4a06
[ 2.697432] RDX: 0000000000002000 RSI: 000075054c190000 RDI: 000000000000001b
[ 2.697433] RBP: 00007fff973723c0 R08: 0000000000000000 R09: 0000000000000000
[ 2.697434] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000
[ 2.697434] R13: 00005ea9a2c027c0 R14: 00005ea9a2be5608 R15: 00005ea9a2be55f0
[ 2.697436] </TASK>
[ 2.697436] ---[ end trace ]---
This situation can happen for block devices because when
CONFIG_TRANSPARENT_HUGEPAGE is enabled, the maximum logical_block_size
is 64 KiB. set_init_blocksize() then sets the block device
inode->i_blkbits to 13, which is within this limit.
File I/O does not trigger this problem because for filesystems that do
not support the FS_LBS feature, sb_set_blocksize() prevents
sb->s_blocksize_bits from being larger than PAGE_SHIFT. During inode
allocation, alloc_inode()->inode_init_always() assigns inode->i_blkbits
from sb->s_blocksize_bits. Currently, only xfs_fs_type has the FS_LBS
flag, and since xfs I/O paths do not reach submit_bh_wbc(), it does not
hit the left-shift underflow issue.
[EB: use folio_pos() and consolidate the two shifts by i_blkbits] |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: int3472: Fix double free of GPIO device during unregister
regulator_unregister() already frees the associated GPIO device. On
ThinkPad X9 (Lunar Lake), this causes a double free issue that leads to
random failures when other drivers (typically Intel THC) attempt to
allocate interrupts. The root cause is that the reference count of the
pinctrl_intel_platform module unexpectedly drops to zero when this
driver defers its probe.
This behavior can also be reproduced by unloading the module directly.
Fix the issue by removing the redundant release of the GPIO device
during regulator unregistration. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "ipmi: fix msg stack when IPMI is disconnected"
This reverts commit c608966f3f9c2dca596967501d00753282b395fc.
This patch has a subtle bug that can cause the IPMI driver to go into an
infinite loop if the BMC misbehaves in a certain way. Apparently
certain BMCs do misbehave this way because several reports have come in
recently about this. |
| In the Linux kernel, the following vulnerability has been resolved:
xtensa: simdisk: add input size check in proc_write_simdisk
A malicious user could pass an arbitrarily bad value
to memdup_user_nul(), potentially causing kernel crash.
This follows the same pattern as commit ee76746387f6
("netdevsim: prevent bad user input in nsim_dev_health_break_write()") |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix memory leak in ath12k_qmi_driver_event_work()
Currently the buffer pointed by event is not freed in case
ATH12K_FLAG_UNREGISTERING bit is set, this causes memory leak.
Add a goto skip instead of return, to ensure event and all the
list entries are freed properly.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
mount: handle NULL values in mnt_ns_release()
When calling in listmount() mnt_ns_release() may be passed a NULL
pointer. Handle that case gracefully. |
| In the Linux kernel, the following vulnerability has been resolved:
FS: JFS: Check for read-only mounted filesystem in txBegin
This patch adds a check for read-only mounted filesystem
in txBegin before starting a transaction potentially saving
from NULL pointer deref. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mc: Clear minor number before put device
The device minor should not be cleared after the device is released. |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache: free background tracker's queued work in btracker_destroy
Otherwise the kernel can BUG with:
[ 2245.426978] =============================================================================
[ 2245.435155] BUG bt_work (Tainted: G B W ): Objects remaining in bt_work on __kmem_cache_shutdown()
[ 2245.445233] -----------------------------------------------------------------------------
[ 2245.445233]
[ 2245.454879] Slab 0x00000000b0ce2b30 objects=64 used=2 fp=0x000000000a3c6a4e flags=0x17ffffc0000200(slab|node=0|zone=2|lastcpupid=0x1fffff)
[ 2245.467300] CPU: 7 PID: 10805 Comm: lvm Kdump: loaded Tainted: G B W 6.0.0-rc2 #19
[ 2245.476078] Hardware name: Dell Inc. PowerEdge R7525/0590KW, BIOS 2.5.6 10/06/2021
[ 2245.483646] Call Trace:
[ 2245.486100] <TASK>
[ 2245.488206] dump_stack_lvl+0x34/0x48
[ 2245.491878] slab_err+0x95/0xcd
[ 2245.495028] __kmem_cache_shutdown.cold+0x31/0x136
[ 2245.499821] kmem_cache_destroy+0x49/0x130
[ 2245.503928] btracker_destroy+0x12/0x20 [dm_cache]
[ 2245.508728] smq_destroy+0x15/0x60 [dm_cache_smq]
[ 2245.513435] dm_cache_policy_destroy+0x12/0x20 [dm_cache]
[ 2245.518834] destroy+0xc0/0x110 [dm_cache]
[ 2245.522933] dm_table_destroy+0x5c/0x120 [dm_mod]
[ 2245.527649] __dm_destroy+0x10e/0x1c0 [dm_mod]
[ 2245.532102] dev_remove+0x117/0x190 [dm_mod]
[ 2245.536384] ctl_ioctl+0x1a2/0x290 [dm_mod]
[ 2245.540579] dm_ctl_ioctl+0xa/0x20 [dm_mod]
[ 2245.544773] __x64_sys_ioctl+0x8a/0xc0
[ 2245.548524] do_syscall_64+0x5c/0x90
[ 2245.552104] ? syscall_exit_to_user_mode+0x12/0x30
[ 2245.556897] ? do_syscall_64+0x69/0x90
[ 2245.560648] ? do_syscall_64+0x69/0x90
[ 2245.564394] entry_SYSCALL_64_after_hwframe+0x63/0xcd
[ 2245.569447] RIP: 0033:0x7fe52583ec6b
...
[ 2245.646771] ------------[ cut here ]------------
[ 2245.651395] kmem_cache_destroy bt_work: Slab cache still has objects when called from btracker_destroy+0x12/0x20 [dm_cache]
[ 2245.651408] WARNING: CPU: 7 PID: 10805 at mm/slab_common.c:478 kmem_cache_destroy+0x128/0x130
Found using: lvm2-testsuite --only "cache-single-split.sh"
Ben bisected and found that commit 0495e337b703 ("mm/slab_common:
Deleting kobject in kmem_cache_destroy() without holding
slab_mutex/cpu_hotplug_lock") first exposed dm-cache's incomplete
cleanup of its background tracker work objects. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel/uncore: Fix reference count leak in snr_uncore_mmio_map()
pci_get_device() will increase the reference count for the returned
pci_dev, so snr_uncore_get_mc_dev() will return a pci_dev with its
reference count increased. We need to call pci_dev_put() to decrease the
reference count. Let's add the missing pci_dev_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: core: Use different devices for resource allocation and DT lookup
Following by the below discussion, there's the potential UAF issue
between regulator and mfd.
https://lore.kernel.org/all/20221128143601.1698148-1-yangyingliang@huawei.com/
From the analysis of Yingliang
CPU A |CPU B
mt6370_probe() |
devm_mfd_add_devices() |
|mt6370_regulator_probe()
| regulator_register()
| //allocate init_data and add it to devres
| regulator_of_get_init_data()
i2c_unregister_device() |
device_del() |
devres_release_all() |
// init_data is freed |
release_nodes() |
| // using init_data causes UAF
| regulator_register()
It's common to use mfd core to create child device for the regulator.
In order to do the DT lookup for init data, the child that registered
the regulator would pass its parent as the parameter. And this causes
init data resource allocated to its parent, not itself. The issue happen
when parent device is going to release and regulator core is still doing
some operation of init data constraint for the regulator of child device.
To fix it, this patch expand 'regulator_register' API to use the
different devices for init data allocation and DT lookup. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: meson-gx: fix return value check of mmc_add_host()
mmc_add_host() may return error, if we ignore its return value,
it will lead two issues:
1. The memory that allocated in mmc_alloc_host() is leaked.
2. In the remove() path, mmc_remove_host() will be called to
delete device, but it's not added yet, it will lead a kernel
crash because of null-ptr-deref in device_del().
Fix this by checking the return value and goto error path which
will call mmc_free_host(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix memory leak in kfd_mem_dmamap_userptr()
If the number of pages from the userptr BO differs from the SG BO then the
allocated memory for the SG table doesn't get freed before returning
-EINVAL, which may lead to a memory leak in some error paths. Fix this by
checking the number of pages before allocating memory for the SG table. |
