Export limit exceeded: 413877 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (11622 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97906 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bootconfig: Fix integer overflow in initrd size check Sashiko reported that in get_boot_config_from_initrd(), a crafted initrd with a huge bootconfig size (such as 0xFFFFFFFF) can cause the pointer arithmetic: data = ((void *)hdr) - size; to wrap around on 32-bit systems (or when pointer subtraction overflows). Because data wraps around, the subsequent bounds check: if ((unsigned long)data < initrd_start) evaluates to false, bypassing the check. The kernel then calls xbc_calc_checksum(data, size), which attempts to read 4GB of memory, hitting unmapped pages and triggering a fatal kernel page fault during early boot. Furthermore, on 64-bit systems with an initrd > 4.29 GB, an unbounded 32-bit size can similarly bypass the initrd_start check. Fix this by: 1. Ensuring the initrd is at least large enough to contain the bootconfig footer and verifying hdr is within the initrd bounds. 2. Checking that size does not exceed XBC_DATA_MAX and does not exceed the available space between initrd_start and hdr before performing pointer subtraction. | ||||
| CVE-2026-97587 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf: RISC-V: store available counter mask as bitmap The available-counter mask was a single unsigned long, but iteration uses RISCV_MAX_COUNTERS, which is 64. On RV32 that reads past the object. Filling with an unsigned-long bit at index 32 and above is also wrong. Use DECLARE_BITMAP and set_bit/bitmap helpers. Walk each bitmap word into CFG_MATCH when checking events, when allocating an index, and when stopping all counters. Set the counter base to i times BITS_PER_LONG. Share the CFG_MATCH ecall through a small helper so the 32-bit argument split is not duplicated. On qemu-system-riscv32 the probe bitmap has bits above XLEN set, so the first word alone is not enough. [pjw@kernel.org: updated to apply; fixed checkpatch.pl issues] | ||||
| CVE-2026-97529 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Validate BSG request_len before reading vendor_cmd[] The FC BSG transport allocates job->request via memdup_user() using the exact user-supplied request_len. For FC_BSG_HST_VENDOR, fc_bsg_host_dispatch() only guarantees request_len covers msgcode and vendor_id; it does not account for the vendor_cmd[] flexible array. qla2xxx then reads the command selector vendor_cmd[0] and, in several sub-handlers, vendor_cmd[1]/[2] or structures overlaid on the vendor command area without verifying request_len. A caller holding CAP_SYS_RAWIO can submit a short request whose vendor_id matches the host, triggering out-of-bounds heap reads (KASAN-detectable, and able to mis-select a command or panic). Add a central guard in qla2x00_process_vendor_specific() so the selector is always in bounds, restrict the early vendor_cmd[0] read in qla24xx_bsg_request() to sufficiently long vendor messages, and add request_len checks to the sub-handlers that read further: qla24xx_proc_fcp_prio_cfg_cmd(), qla2x00_process_loopback(), qla84xx_reset(), qla84xx_updatefw(), qla2x00_read_optrom(), qla2x00_update_optrom(), qlafx00_mgmt_cmd() and qla28xx_validate_flash_image(). | ||||
| CVE-2026-97428 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: harden FRU PIA parsing with bounded helpers Replace the open-coded TLV walk with fru_pia_advance() and fru_pia_copy_field() helpers that bound every read by the actual EEPROM data length, preventing out-of-bounds reads on truncated or malformed FRU data. | ||||
| CVE-2026-93793 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: validate TX_CMD response layout TX_CMD parsing uses frame_count to walk status entries and then read the trailing SCD SSN. Make the minimum-length check follow that exact runtime layout calculation before parsing the payload. For new TX API, reject TX_CMD responses with frame_count != 1 and warn/return in the aggregation handler to document that aggregated accounting is expected via BA notifications. | ||||
| CVE-2026-93272 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: remoteproc: qcom_wcnss: Fix handling the lack of PD regulators in v3 The changes introduced to handle single power domain platforms have swapped the info pointer increment from num_pd_vregs to num_pds, which would shift the info pointer past the end of the array for pronto-v3, which does not list power domain regulators in vregs. This showed up as a difference between GCC- and LLVM-compiled kernels on SDM632 devices, where only with LLVM one would get the "regulator request with no identifier" error, because the out-of-bounds memory ended up being zeroed. Fix by skipping the increment when there are more power domains than regulators. | ||||
| CVE-2026-93148 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject MEM_ALLOC BTF accesses past object bounds BTF struct walks relax the struct-size check for accesses through a trailing flexible array. That is valid for ordinary BTF type walking, but PTR_TO_BTF_ID | MEM_ALLOC values point to objects allocated with the static BTF type size. When walking a MEM_ALLOC object, reject the access before applying the flexible-array relaxation if the access range extends past the struct size. Apply the same policy to struct ID matching so kfunc and kptr type checks do not walk past the allocated object bounds either. | ||||
| CVE-2026-92480 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Validate string descriptors The string descriptor length includes a two-byte header while the UTF-16 payload starts after it. utf16s_to_utf8s() expects a count of UTF-16 code units, not bytes. Passing the payload byte count can make it read beyond the descriptor buffer. Validate that the payload has an even byte count, pass a code-unit count to the converter, and allocate sufficient UTF-8 output space. The raw string buffer starts after the descriptor header but its size is bLength. Copying bLength bytes from that pointer can read beyond the response buffer. Allocate a zeroed bLength-sized buffer and copy only the UTF-16 payload. This preserves the raw buffer size consumed by the RPMB device-ID ABI while avoiding the overread. | ||||
| CVE-2026-90174 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix slab-out-of-bounds read in ksmbd_alloc_user() ksmbd_alloc_user() copies resp->hash_sz bytes out of the mountd IPC login response with user->passkey_sz = resp->hash_sz; user->passkey = kmalloc(resp->hash_sz, KSMBD_DEFAULT_GFP); if (user->passkey) memcpy(user->passkey, resp->hash, resp->hash_sz); resp->hash_sz is a __u16 supplied by the response, but resp->hash[] is only KSMBD_REQ_MAX_HASH_SZ bytes. A malformed or malicious login response can set hash_sz well beyond that (up to 65535), so the memcpy() reads past the end of the response object. ipc_validate_msg() does not bound hash_sz, so reject any response whose hash_sz exceeds the on-stack hash[] buffer before allocating and copying. [ 2030.238706] BUG: KASAN: slab-out-of-bounds in ksmbd_alloc_user+0x278/0x680 [ 2030.240549] Read of size 65535 at addr ffff888121bb6680 by task kworker/4:1/18611 [ 2030.242296] [ 2030.242710] CPU: 4 UID: 0 PID: 18611 Comm: kworker/4:1 Not tainted 7.1.0-next-20260623-virtme #96 PREEMPT(lazy) [ 2030.242732] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 [ 2030.242743] Workqueue: ksmbd-io handle_ksmbd_work [ 2030.242763] Call Trace: [ 2030.242769] <TASK> [ 2030.242776] dump_stack_lvl+0xa2/0xd0 [ 2030.242794] print_address_description+0x77/0x200 [ 2030.242815] ? ksmbd_alloc_user+0x278/0x680 [ 2030.242831] print_report+0x58/0x70 [ 2030.242848] kasan_report+0x117/0x150 [ 2030.242869] ? ksmbd_alloc_user+0x278/0x680 [ 2030.242888] kasan_check_range+0x3c7/0x3f0 [ 2030.242908] ? ksmbd_alloc_user+0x278/0x680 [ 2030.242925] __asan_memcpy+0x29/0x70 [ 2030.242942] ksmbd_alloc_user+0x278/0x680 [ 2030.242960] ksmbd_login_user+0xc3/0x120 [ 2030.242978] ntlm_authenticate+0x5e6/0x1b00 [ 2030.243017] ? __pfx_ntlm_authenticate+0x10/0x10 [ 2030.243035] ? ksmbd_session_lookup+0x188/0x1d0 [ 2030.243054] ? __pfx_ksmbd_session_lookup+0x10/0x10 [ 2030.243090] ? __sanitizer_cov_trace_switch+0x7b/0x140 [ 2030.243108] smb2_sess_setup+0x1e4a/0x27b0 [ 2030.243126] ? copy_from_kernel_nofault+0x199/0x300 [ 2030.243156] ? __pfx_smb2_sess_setup+0x10/0x10 [ 2030.243173] ? get_smb2_cmd_val+0xe3/0x1c0 [ 2030.243208] handle_ksmbd_work+0x954/0x1280 [ 2030.243230] ? __pfx_handle_ksmbd_work+0x10/0x10 [ 2030.243249] ? process_scheduled_works+0xa07/0x1490 [ 2030.243270] ? process_scheduled_works+0xa07/0x1490 [ 2030.243291] process_scheduled_works+0xa70/0x1490 [ 2030.243320] ? __pfx_process_scheduled_works+0x10/0x10 [ 2030.243340] ? do_raw_spin_lock+0x130/0x300 [ 2030.243358] ? lock_is_held_type+0x7b/0x110 [ 2030.243388] worker_thread+0x932/0xe20 [ 2030.243415] kthread+0x38a/0x470 [ 2030.243431] ? __pfx_worker_thread+0x10/0x10 [ 2030.243451] ? __pfx_kthread+0x10/0x10 [ 2030.243467] ret_from_fork+0x484/0x910 [ 2030.243485] ? __pfx_ret_from_fork+0x10/0x10 [ 2030.243501] ? __switch_to+0xc77/0x12c0 [ 2030.243523] ? __pfx_kthread+0x10/0x10 [ 2030.243540] ret_from_fork_asm+0x1a/0x30 [ 2030.243564] </TASK> [ 2030.243570] [ 2030.290164] Allocated by task 19279: [ 2030.290911] kasan_save_track+0x3e/0x80 [ 2030.292179] __kasan_kmalloc+0x72/0x90 [ 2030.293217] __kvmalloc_node_noprof+0x3ff/0x6b0 [ 2030.294467] handle_generic_event+0x59b/0x750 [ 2030.295345] genl_family_rcv_msg_doit+0x238/0x340 [ 2030.296553] genl_rcv_msg+0x606/0x7b0 [ 2030.297129] netlink_rcv_skb+0x22b/0x4a0 [ 2030.298500] genl_rcv+0x2d/0x40 [ 2030.299273] netlink_unicast+0x7ba/0x930 [ 2030.300019] netlink_sendmsg+0x8c3/0xb00 [ 2030.301073] __sock_sendmsg+0xec/0x140 [ 2030.301579] __sys_sendto+0x357/0x470 [ 2030.302255] __x64_sys_sendto+0xe3/0x100 [ 2030.303425] do_syscall_64+0x135/0x460 [ 2030.304763] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 2030.305594] [ 2030.305819] The buggy address belongs to the object at ffff888121bb6640 [ 2030.305819] which belongs to the cache kmalloc-192 of size 192 [ 2030.309595] The buggy address ---truncated--- | ||||
| CVE-2026-90112 | 1 Linux | 1 Linux Kernel | 2026-10-21 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: qlcnic: validate unified ROM sections before loading The unified ROM parser reads directory, product, and data-descriptor fields from the firmware file. Existing validation forms table and data ends with unchecked additions and multiplications. Malformed values can wrap before they are compared with the firmware size. The parser also dereferences typed pointers at firmware-controlled offsets. Valid descriptor extents alone are insufficient for the consumers. The loader reads a fixed-size bootloader regardless of its declared size, the version parser assumes a 17-byte tail, and a partial final firmware word is read as a full u64. A truncated image can therefore make the driver read beyond the firmware allocation during validation or loading. Replace the pointer-returning parser with bounded range helpers. Validate table entry sizes, descriptor indices, section ranges, the fixed bootloader load length, and the version tail before exposing any section. Read all file fields with unaligned little-endian accessors and assemble a partial final word from only the bytes that remain. Apply the same range checks to the legacy image before reading its fixed fields. | ||||
| CVE-2026-89906 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Refactor jump offset calculation in tail call The old macro-based jmp_offset calculation derives the jump distance from a stale prior-pass code stride, which can lead to wrong branch offsets and soft lockups under extra JIT passes. Fix this by calculating the offset directly on the absolute target: "ctx->offset[insn + 1] - ctx->idx". To avoid a false 16-bit range check abort during size estimation, add a "ctx->image == NULL" guard to inject a safe dummy offset. | ||||
| CVE-2026-80576 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: reject oversized IBs with per-ring packet limits On GFX rings, amdgpu_cs_p2_ib() passed user-supplied ib_bytes through to ib->length_dw without a limit, while ring_emit_ib() encodes length into packet fields. Oversized values can corrupt adjacent control bits and destabilize command submission. Add a per-ring IB packet size limit helper and reject command submissions exceeding the corresponding dword limit before IB allocation. Use the documented 20-bit limit for GFX/compute/SDMA/VPE, and apply the MM fallback limit for other ring types. (cherry picked from commit 7f48fa2cf62e3fa6c9c3870aa74988f773247e52) | ||||
| CVE-2026-74747 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: revalidate ihl to prevent out-of-bounds access While the outer IP header is already pulled into the skb head, we must be careful and revalidate the embedded headers after reading them from the skb frags to prevent out-of-bounds access. One such place reported by Sashiko is ip_vs_nat_icmp() where local process can change the ihl field and after skb_ensure_writable() we can see larger value which is a problem for the ip_send_check(cih) calls. Add check to drop the packet if the ihl field is changed. | ||||
| CVE-2026-74729 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc: aspeed: lpc-snoop: Fix usercopy overflow in snoop_file_read put_fifo_with_discard() acts as both producer and consumer on the kfifo: it calls kfifo_skip() (advances out) and kfifo_put() (advances in) from the IRQ handler without synchronizing with snoop_file_read(), which also consumes via kfifo_to_user(). On SMP systems this concurrent access can leave (in - out) larger than the ring buffer, so __kfifo_to_user()'s clamp to (in - out) is ineffective and kfifo_copy_to_user() can attempt a copy_to_user() past the kmalloc-2k backing store: usercopy: Kernel memory exposure attempt detected from SLUB object 'kmalloc-2k' (offset 0, size 2049)! kernel BUG at mm/usercopy.c! Call trace: usercopy_abort __check_heap_object __check_object_size kfifo_copy_to_user __kfifo_to_user snoop_file_read vfs_read Serialize kfifo access with a per-channel spinlock shared between the IRQ handler (producer) and the file reader (consumer). Annotate @fifo with __guarded_by(&lock) and opt the driver into context analysis so the compiler enforces that all fifo access holds the lock. | ||||
| CVE-2026-74723 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: lzo: reject inline extents without valid headers [BUG] For a crafted btrfs image, the following KASAN can be triggered when reading an inline lzo compressed file extent: BUG: KASAN: slab-out-of-bounds in lzo_decompress+0x57d/0x700 Read of size 4 at addr ffff888006f2e644 by task btrfs_lzo_inlin/77 Call Trace: <TASK> dump_stack_lvl+0x5b/0x70 print_report+0xd1/0x610 kasan_report+0xe0/0x110 __asan_report_load_n_noabort+0x13/0x20 lzo_decompress+0x57d/0x700 btrfs_decompress+0x140/0x1c0 uncompress_inline+0x147/0x1b0 btrfs_get_extent+0xb23/0x10a0 btrfs_do_readpage.constprop.0+0x538/0x1ac0 btrfs_readahead+0x32f/0x5f0 read_pages+0x16f/0x850 page_cache_ra_unbounded+0x296/0x490 do_page_cache_ra+0xd9/0x130 page_cache_sync_ra+0x3ee/0x6f0 filemap_get_pages+0x306/0x15c0 filemap_read+0x329/0xd00 btrfs_file_read_iter+0x1f8/0x2b0 vfs_read+0x4ef/0x720 ksys_read+0xf8/0x1d0 __x64_sys_read+0x71/0xb0 x64_sys_call+0x1ab0/0x1b70 do_syscall_64+0x61/0x470 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> [CAUSE] For an inline lzo compressed file extent, there should always be one lzo header, recording the total length of the compressed data, followed by one segment header, recording the compressed lzo payload. But if a crafted inline lzo compressed file extent contains only an lzo header, without the segment header or payload, lzo_decompress() will still try to read the segment header, causing a read beyond the item boundary. Furthermore if the inline lzo compressed file extent is the first item of the leaf, it will be at the extent buffer boundary. The above out-of-boundary read will go beyond the extent buffer boundary, triggering the above KASAN report. [FIX] Validate the total length of the inlined lzo compressed file extent, to make sure there is at least one LZO header and one segment header, and a non-zero payload. [ Rework the commit message to remove slop ] | ||||
| CVE-2026-74466 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Close speculative mem read possibility The domain value is extracted from a given CCA or EP11 ioctl struct when a CPRB is about to be sent. Thus this is a user controlled value. Under some special conditions (custom device node used, administrative load) this value is used as an array index after bounds checking, but without speculation barrier. Add the missing array_index_nospec() call to prevent speculative execution where this domain value is used. | ||||
| CVE-2026-74350 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate fast symlink target during inode read ocfs2_validate_inode_block() already rejects several inconsistent self-contained dinodes before they are exposed to the rest of the filesystem. Fast symlinks need the same treatment. A zero-cluster symlink is treated as a fast symlink and later read through page_get_link() and ocfs2_fast_symlink_read_folio(). That path uses strnlen() on the inline payload and then copies len + 1 bytes into the folio. If a corrupt dinode stores an i_size that does not fit the inline area or omits the terminating NUL at i_size, that copy reads past the end of the inode block buffer. Reject zero-cluster symlink dinodes whose i_size exceeds the inline fast-symlink capacity or whose inline payload is not NUL-terminated exactly at i_size when the inode block is validated. This keeps malformed fast symlinks from reaching the read path. Validation reproduced this kernel report: KASAN use-after-free in ocfs2_fast_symlink_read_folio+0x12c/0x1f0 RIP: 0033:0x7f5c6d859aa7 Read of size 3905 Call trace: dump_stack_lvl+0x66/0xa0 (?:?) print_report+0xce/0x630 (?:?) ocfs2_fast_symlink_read_folio+0x12c/0x1f0 (fs/ocfs2/inode.c:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x19f/0x330 (?:?) kasan_report+0xe0/0x110 (?:?) kasan_check_range+0x105/0x1b0 (?:?) __asan_memcpy+0x23/0x60 (?:?) filemap_read_folio+0x27/0xe0 (?:?) filemap_read_folio+0x35/0xe0 (?:?) do_read_cache_folio+0x138/0x230 (?:?) __page_get_link+0x26/0x110 (?:?) page_get_link+0x2e/0x70 (?:?) vfs_readlink+0x15e/0x250 (?:?) touch_atime+0x4d/0x370 (?:?) do_readlinkat+0x186/0x200 (?:?) do_user_addr_fault+0x65a/0x890 (?:?) __x64_sys_readlink+0x46/0x60 (?:?) do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) | ||||
| CVE-2026-68453 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix buffer over-read in cca_cipher2protkey Add validation of both the actual key buffer size and token length fields in all the cca_check_sec*token() functions. Additionally check in cca_gencipherkey() for possible underflow with returned key size. The CCA token structures contain user-controlled len fields that were used in operations without proper validation against both the actual buffer size and minimum token structure size. An attacker could set this field larger than the actual buffer size, leading to reading beyond buffer boundaries. This may result in a kernel crash or exposure of memory via sending this as part of a request down to the crypto card. Also an attacker could have used a very small len value and thus enforce a buffer under-run which may produce similar effects as a over-read. So now a key must - key buf length must be at least sizeof the token struct - the key len field inside the token must fit into the range of sizeof key token struct ... key buf length | ||||
| CVE-2026-68447 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: clamp v9 CRIU control stack checkpoint copy to BO size CRIU checkpoint copies the MQD control stack using cp_hqd_cntl_stack_size from hardware without bounding it to the allocated BO region. If the HW field is larger than the queue's control stack allocation, memcpy reads past the BO into adjacent GTT memory and can leak kernel data to userspace. Store the page-aligned control stack BO size in mqd_manager and clamp checkpoint copies and reported checkpoint sizes to min(cp_hqd_cntl_stack_size, mm->ctl_stack_size). Apply the same bound for multi-XCC v9.4.3 checkpoint layout. (cherry picked from commit 6c2abd0ec09e86c6323010673766f76050e28aa3) | ||||
| CVE-2026-64320 | 1 Linux | 1 Linux Kernel | 2026-10-21 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: fix pre-auth out-of-bounds heap read in Discovery Get Log Page nvmet_execute_disc_get_log_page() validates only the dword alignment of the host-supplied Log Page Offset (lpo). The 64-bit offset is then added to a small kzalloc'd buffer that holds the discovery log page and the result is passed straight to nvmet_copy_to_sgl(), which memcpy()s data_len bytes out to the host with no source-side bound check: u64 offset = nvmet_get_log_page_offset(req->cmd); /* 64-bit host */ size_t data_len = nvmet_get_log_page_len(req->cmd); /* 32-bit host */ ... if (offset & 0x3) { ... } /* only check */ ... alloc_len = sizeof(*hdr) + entry_size * discovery_log_entries(req); buffer = kzalloc(alloc_len, GFP_KERNEL); ... status = nvmet_copy_to_sgl(req, 0, buffer + offset, data_len); The Discovery controller is unauthenticated -- nvmet_host_allowed() returns true unconditionally for the discovery subsystem -- so the call is reachable pre-authentication by any TCP/RDMA/FC peer that can reach the nvmet target. With a discovery log page of ~1 KiB, an attacker requesting up to 4 KiB starting at offset == alloc_len reads the next slab page out and gets its content returned over the fabric (an empirical run on a default nvmet-tcp loopback target leaked 81 canonical kernel pointers in one Get Log Page response). Pointing the offset at unmapped kernel memory faults the in-kernel memcpy and crashes (or panics, on panic_on_oops=1) the target host instead. The attacker-controlled source-side offset pattern "nvmet_copy_to_sgl(req, 0, buffer + ATTACKER_OFFSET, ...)" is unique to nvmet_execute_disc_get_log_page in the entire nvmet codebase: every other Get Log Page handler in admin-cmd.c either ignores lpo (and silently starts every response at offset 0) or tracks a local destination offset with a fixed source pointer. Validate the host-supplied offset against the log page size, cap the copy length to what is actually available, and zero-fill any remainder of the host transfer buffer. The zero-fill matches the existing short-response pattern in nvmet_execute_get_log_changed_ns() (admin-cmd.c) and prevents leaking transport SGL contents when the host asks for more bytes than the log page contains. | ||||