| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pwm-fan) Stop RPM timer before freeing tach data
sample_timer() rearms the RPM timer and accesses the devm-managed
ctx->tachs and ctx->pulses_per_revolution arrays. The cleanup action
which stops the timer is registered before those arrays are allocated.
Since devres releases entries in reverse order, driver detach can free
the arrays before pwm_fan_cleanup() shuts down the timer. A timer expiry
in that window accesses the freed tach data.
With a KASAN kernel, a test-only kprobe delayed entry to
pwm_fan_cleanup() while normal sysfs unbind ran. Each of three runs
reported three four-byte reads and two four-byte writes in sample_timer()
after its backing devm allocations had been freed. The helper did not
invoke the timer callback, cleanup actions or free functions.
With the fix, three matching unbind runs completed without KASAN, BUG,
WARNING, Oops or panic. Instrumentation confirmed that timer retirement
completed before the first timer backing allocation was released.
Split timer retirement from the power cleanup and register its devres
action after the timer backing data and IRQ actions are installed. This
preserves the early power rollback action while ensuring the timer is
retired before its backing data is released. Use timer_shutdown_sync()
because the callback can rearm itself. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wcn36xx: Fix potential use-after-free in TX ack timer teardown
wcn36xx_dxe_deinit() tears down the TX ack timer with timer_delete(),
which only dequeues the timer and does not wait for a callback that is
already executing; the preceding free_irq() calls synchronize the
interrupt handlers only. The callback, wcn36xx_dxe_tx_timer(), can
therefore be running past the teardown and use the wcn freed along
with the ieee80211_hw in wcn36xx_remove(): it takes wcn->dxe_lock,
reads wcn->tx_ack_skb and passes wcn->hw to
ieee80211_tx_status_irqsafe().
Fix this by using timer_shutdown_sync(), which waits for a running
callback and also prevents the timer from being rearmed again. The
timer is set up again by wcn36xx_dxe_init() on the next start, so the
start/stop cycle is unaffected.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix use-after-free of iface in cifs_try_adding_channels()
cifs_try_adding_channels() iterates ses->iface_list with
list_for_each_entry_safe_from(), which captures the next entry
(niface) under iface_lock. The loop body then drops iface_lock for
the whole duration of cifs_ses_add_channel().
A concurrent interface refresh (SMB3_request_interfaces() ->
parse_server_interfaces()) marks all ifaces inactive and removes and
frees any that are not re-advertised via list_del() + kref_put(),
where release_iface() is a bare kfree(). Since niface typically has
no channel holding a reference, the list reference is its last and it
can be freed inside the unlocked window. On continue, the iterator
advance step then dereferences niface->iface_head.next, and the loop
body reads iface->rdma_capable/is_active, both on freed memory.
Fix this by never keeping an unreferenced list pointer across the
unlocked window. Each channel attempt now re-scans the list from the
head under iface_lock, takes a kref on the selected candidate, and
passes only that referenced candidate to cifs_ses_add_channel().
weight_fulfilled still tracks selection progress, so restarting the
scan preserves the original weighted distribution and the
weight_fulfilled-before-kref_put ordering on the failure path.
Add a per-pass attempts cap so a flapping interface refresh cannot
keep the inner loop spinning within a single tries increment. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check ancestor frames for rbtree callbacks
bpf_rbtree_add() invokes its comparator while the caller holds the root
lock. The native insertion code retains raw parent and link pointers across
the callback, so the verifier prohibits unlocking, consuming tree nodes,
or changing RCU state from that callback.
in_rbtree_lock_required_cb() only checks the innermost verifier frame.
Static subprogram calls are permitted while holding a spin lock, and such a
call pushes a frame without in_callback_fn set. Consequently, all callback
restrictions disappear in the nested frame. The subprogram can unlock the
tree, remove and drop the node being compared, then relock. Native insertion
resumes with the stale parent pointer and links freed memory into the tree.
Walk all active frames for the rbtree callback instead. Benign static
subprograms remain permitted, while callback restrictions follow execution
into nested frames. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Preserve inner map identity in callback frames
Callback frame constructors initialize map-typed argument registers with
__mark_reg_known_zero() and then restore map_ptr. This clears map_uid,
which is the only field distinguishing inner maps that share an
inner_map_meta template.
When a timer callback invokes bpf_for_each_map_elem() on a second inner
map, both the saved first map and the second map value can reach the nested
callback as the same template with map_uid zero. bpf_timer_init() then
accepts pairing the timer from the second map with the first map.
The runtime records the first map in the timer without taking a reference.
Freeing that map does not find the timer stored in the second map, so a
later timer callback dereferences the freed map.
Copy map_uid from the same caller register as map_ptr when constructing
for-each, timer/workqueue, and task-work callback arguments. The existing
identity check can then reject mismatched inner maps while allowing a
callback value to be paired with its actual map. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost-vdpa: protect config_ctx from being freed under the config callback
vhost_vdpa_config_cb() loads v->config_ctx and signals it without taking
a reference and without holding any lock:
struct eventfd_ctx *config_ctx = v->config_ctx;
if (config_ctx)
eventfd_signal(config_ctx);
VHOST_VDPA_SET_CONFIG_CALL replaces that field and drops what is normally
the last reference to the old context:
swap(ctx, v->config_ctx);
if (ctx)
eventfd_ctx_put(ctx);
eventfd_ctx_put() drops the last kref and frees the context immediately,
with no RCU grace period, so a callback that has already loaded the
pointer goes on to dereference freed memory. The two sides share no
lock: the ioctl runs under vhost_dev.mutex, while the parent invokes the
callback from its own interrupt or workqueue context.
This is not the reopen refcount underflow fixed by commit f6bbf0010ba0
("vhost-vdpa: fix use-after-free of v->config_ctx"), which was about
vhost_vdpa_config_put() leaving a stale pointer behind. Here the pointer
is maintained correctly and it is the read side that is unprotected.
With VDUSE as the parent this is reachable from userspace with access to
/dev/vduse (root by default). VDUSE_DEV_INJECT_CONFIG_IRQ queues
dev->inject, and vduse_dev_irq_inject() runs the callback under VDUSE's
own dev->irq_lock, which vhost does not hold. vduse_dev_reset() does
flush_work(&dev->inject), but VHOST_VDPA_SET_CONFIG_CALL never goes
through reset, so an inject already in flight is not waited for. A
process that injects config interrupts on the VDUSE fd while another
thread swaps the call fd on the vhost-vdpa fd hits it in seconds:
BUG: KASAN: slab-use-after-free in native_queued_spin_lock_slowpath
Read of size 4 at addr ffff888107d21808 by task kworker/u17:1/2993
Workqueue: vduse-irq vduse_dev_irq_inject
Call Trace:
native_queued_spin_lock_slowpath+0x97/0x5b0
_raw_spin_lock_irqsave+0xd4/0xe0
eventfd_signal_mask+0x69/0x120
vhost_vdpa_config_cb+0x34/0x50
vduse_dev_irq_inject+0x46/0x60
process_one_work+0x468/0x950
Allocated by task 2992:
do_eventfd+0x50/0x200
__x64_sys_eventfd2+0x2e/0x40
Freed by task 2992:
eventfd_ctx_put+0xb9/0xc0
vhost_vdpa_unlocked_ioctl+0x116c/0x2190
Add a spinlock covering every access to config_ctx, so the callback
either signals a context that is still alive or observes NULL, and the
put happens only once no callback can reach the old value.
Clearing the parent's callback before the put would not be enough: of the
in-tree set_config_cb() implementations only VDUSE takes a lock, the rest
store the pointer unlocked, so that would not order against an in-flight
invocation. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: ice: don't dereference pointers from TP_printk()
After forwarding net-next during the v7.3 merge window we started
seeing:
TRACE EVENT ERROR: Event ice_tx_dim_work has double dereference in TP_printk: REC->q_vector->tx.tx_ring->q_index
WARNING: kernel/trace/trace_events.c:420 at test_double_dereference.cold+0x39/0x4b
this is due to extra checks added in tracing subsystem in
commit b5cc230af5e5 ("tracing: Warn when an event dereferences a pointer in TP_printk()").
Printing happens long after the event was recorded, by which point
the pointers may be invalid (the ring or the dim instance).
Copy the eight scalars into the event instead. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Allow list_del during perf_event_overflow()
A PMU might use perf_sched_cb_inc() and perf_sched_cb_dec()
interface to get the PMU call back function pmu::sched_task
invoked at schedule in and schedule out. This is achieved
by walking along the list anchored by sched_cb_list.
The following scenario might lead to a list corruption.
perf_pmu_sched_task()
for_each_list_entry(..., &sched_cb_list)
+--> __perf_pmu_sched_task()
+--> event->pmu->sched_task())
+--> PMU_push_sample()
+--> perf_event_overflow()
+--> __perf_event_overflow()
+--> pmu->stop()
+--> perf_sched_cb_dec()
remove entry from sched_cb_list
while list node in use.
This happens when ioctl(fd, PERF_EVENT_IOC_REFRESH, xxx) has been
invoked and perf_event::event_limit hits zero.
Prevent the list corruption and convert for_each_list_entry()
to for_each_list_entry_safe(). |
| In the Linux kernel, the following vulnerability has been resolved:
configfs: pin the symlink target's dirent instead of chasing ->ci_dentry
create_link() reads the target's configfs_dirent from
item->ci_dentry->d_fsdata, relying on the item reference taken by
get_target(). That reference pins the item, not its dentry: the dentry is
pinned by DCACHE_PERSISTENT, which configfs_remove_dir() releases via
simple_rmdir() while the item is still alive. A symlink racing with rmdir
of its target can therefore find ->ci_dentry freed and its dirent
released, triggering WARN_ON(!atomic_read(&sd->s_count)) in configfs_get().
Take the dirent in get_target() as well, under ->d_lock and atomically
with the item reference, and pass it down to create_link(). A hashed
dentry has not been killed yet, so its ->d_fsdata reference keeps the
dirent alive there. |
| In the Linux kernel, the following vulnerability has been resolved:
configfs: unhash the dentry before dropping the item in rmdir
configfs_get_config_item() treats a hashed dentry as proof that
sd->s_element is a live config_item. configfs_rmdir() breaks that:
simple_rmdir() leaves the dentry hashed, the last reference to the item is
dropped right after, and the dentry is only unhashed by d_delete() once
->rmdir() has returned. configfs_symlink() resolves its target holding no
lock on it, so get_target() can land in that window:
BUG: KASAN: slab-use-after-free in config_item_get+0x26/0x90
get_target fs/configfs/symlink.c:128 [inline]
configfs_symlink+0x4ab/0x1030 fs/configfs/symlink.c:185
Unhash in configfs_remove_dir(), while the item is still guaranteed to be
there. A reference obtained just before that stays harmless, as
create_link() rechecks CONFIGFS_USET_DROPPING, already set by
configfs_detach_prep(). Both configfs_unregister_subsystem() paths
d_drop() after detaching, so this only makes rmdir match them. |
| In the Linux kernel, the following vulnerability has been resolved:
reboot: fix cad_pid use-after-free race
cad_pid is a single kernel-wide struct pid pointer. proc_do_cad_pid()
reads it and passes it to pid_vnr() without protecting the lifetime of
the referenced struct pid. A concurrent writer can replace cad_pid and
drop the final reference to the old struct pid after the reader has
loaded the pointer but before pid_vnr() has finished dereferencing it,
causing a use-after-free.
kill_cad_pid() has the same lifetime race when it passes cad_pid to
kill_pid().
At the time this issue was reported, an unprivileged user could reach the
sysctl through user and PID namespaces because cad_pid was registered in
pid_table[]. Moving cad_pid back to the global reboot sysctl table
corrected that namespace and permission mismatch, but did not fix the
underlying lifetime race.
Fix this by treating cad_pid as an RCU-protected pointer at both read
sites and by waiting for a grace period before dropping the old reference
on the write side.
call_rcu(&old_pid->rcu, ...) cannot be used here because free_pid()
also queues pid->rcu; queueing the same rcu_head twice can corrupt the
RCU callback list.
Original KASAN crash stack:
kernel/pid.c:545 pid_nr_ns() # reads freed pid->level
kernel/pid.c:556 pid_vnr() # calls pid_nr_ns()
kernel/pid.c:775 proc_do_cad_pid() # calls pid_vnr(cad_pid) |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Set the trace clock before registering the histogram trigger
hist_register_trigger() puts the trigger on the global named_triggers
list in cmd_ops->init(), and only then sets the trace clock:
if (data->cmd_ops->init) {
ret = data->cmd_ops->init(data);
if (ret < 0)
goto out;
}
if (hist_data->enable_timestamps) {
ret = tracing_set_clock(file->tr, hist_data->attrs->clock);
if (ret) {
hist_err(tr, HIST_ERR_SET_CLOCK_FAIL, errpos(clock));
goto out;
}
The clock string is not checked anywhere before that call, so a named
trigger using common_timestamp with an unknown clock fails after it has
already become findable. event_hist_trigger_parse() then frees it
without taking it off the list, and the next lookup by name reads the
freed object:
~# cd /sys/kernel/tracing/events/sched/sched_switch
~# echo 'hist:name=foo:keys=common_pid:ts=common_timestamp:clock=bogus' > trigger
bash: echo: write error: Invalid argument
~# echo 'hist:name=foo:keys=common_pid' > trigger
BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0
Read of size 8 at addr ffff88800915d760 by task init/1
find_named_trigger+0xac/0xc0
hist_register_trigger+0xc1/0x900
event_hist_trigger_parse+0x3146/0x6af0
event_trigger_write+0xce/0x160
Freed by task 63:
kfree+0x154/0x420
trigger_kthread_fn+0xfd/0x160
Set the clock before the trigger is registered, so that nothing which
can fail runs after it is published, the way commit 6f86bdeab633
("tracing: Fix bad hist from corrupting named_triggers list") moved the
registration below the rest of the setup.
tracing_set_filter_buffering() is reference counted, so the init failure
path has to drop the reference that the clock block now takes first. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Take trace_array reference when opening a tracer options file
When a tracer option file is opened, it is passed a descriptor that points
to an element on the trace_array's topts array. This element has
information to find the trace array and other information. It uses this
element to take a reference of the trace_array so that the trace_array
does not get removed while this file is opened.
Unfortunately, there's a race condition where the element itself could be
freed by the removal of the instance the trace_array represents causing a
use-after-free as this element that is used to find the trace_array to
increment its reference counter is also freed when the instance is
removed.
To solve this, add a trace_array_tracer_options_get() helper function that
will take the address of the element that is passed to the open function
by the inode->i_private pointer and search all the trace_arrays under a
lock to find the one that the element's address is in the range of the
trace_arrays topts array elements. When a match happens, that trace_array's
reference would be increased.
Note, there's a race where if an admin was deleting and creating trace
instances at the same time and the memory of the old trace_array's array
matched the memory of the new trace_array that it could in theory open the
option from the wrong trace array. But we do not care because it would be
stupid to perform that kind of action. As long as the only thing that can
happen is that the option from the wrong trace array is used and doesn't
crash the kernel it will only make the user confused. But if they are
doing something stupid like this, they are already confused, so no harm
done. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Take the reference before publishing the named histogram trigger
event_hist_trigger_named_init() puts the trigger on the global
named_triggers list and only then takes the reference on the trigger it
shares its histogram with:
data->ref++;
save_named_trigger(data->named_data->name, data);
ret = event_hist_trigger_init(data->named_data);
if (ret < 0) {
kfree(data->cmd_ops);
data->cmd_ops = &trigger_hist_cmd;
}
return ret;
event_hist_trigger_init() fails when alloc_hist_pad() cannot allocate, and
nothing takes the trigger back off the list on the way out.
event_hist_trigger_parse() frees it, and the next lookup by name reads the
freed object:
BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0
Read of size 8 at addr ffff888009346860 by task init/1
find_named_trigger+0xac/0xc0
hist_register_trigger+0xc1/0xa00
event_hist_trigger_parse+0x3146/0x6af0
event_trigger_write+0xce/0x160
Freed by task 67:
kfree+0x154/0x420
trigger_kthread_fn+0xfd/0x160
Do the reference first and publish once it has succeeded, so that nothing
which can fail runs after the trigger becomes findable. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Undo the registration when enabling the histogram trigger fails
Commit 6f86bdeab633 ("tracing: Fix bad hist from corrupting named_triggers
list") described how a trigger that is registered but not on file->triggers
ends up freed while still on the global named_triggers list, and moved the
registration down so that hist_trigger_enable() follows it immediately. One
path still gets there. hist_trigger_enable() adds the trigger and takes it
straight back out when the event cannot be enabled:
list_add_tail_rcu(&data->list, &file->triggers);
update_cond_flag(file);
if (trace_event_trigger_enable_disable(file, 1) < 0) {
list_del_rcu(&data->list);
update_cond_flag(file);
ret--;
}
so the list walk in hist_unregister_trigger() matches nothing, test stays
NULL, and the ->free() that would call del_named_trigger() is skipped.
out_unreg falls through to out_free, which frees the trigger anyway:
BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0
Read of size 8 at addr ffff8880091d3160 by task init/1
find_named_trigger+0xac/0xc0
hist_register_trigger+0xc1/0xa00
event_hist_trigger_parse+0x3146/0x6af0
event_trigger_write+0xce/0x160
Freed by task 69:
kfree+0x154/0x420
trigger_kthread_fn+0xfd/0x160
Leave the trigger where hist_unregister_trigger() can find it and let that
undo the registration, which is the only code that knows all of what
cmd_ops->init() took: the named list entry, the hist_pad reference, the
reference on the trigger a named histogram is shared with, and the copied
cmd_ops. It also pairs the failed trace_event_trigger_enable_disable(),
whose sm_ref and buffered event reference are otherwise left behind.
Since ->free() releases trigger_data and, for a trigger that does not share
its histogram, hist_data with it, out_unreg can no longer fall through to
out_free. For a trigger that does share, hist_register_trigger() has
already destroyed the caller's hist_data, so the fall-through was reading
freed memory there as well.
Move the enable_timestamps check in hist_unregister_trigger() above the
->free() call for the same reason: hist_data does not outlive it once the
trigger being removed is the one that owns it. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btqcomsmd: destroy RPMsg endpoints before freeing hci_dev
The command and ACL RPMsg endpoints store struct btqcomsmd as their
callback private data. The receive callbacks dereference btq->hdev
without taking an hci_dev reference.
The current teardown order frees the hci_dev before destroying the RPMsg
endpoints in both the hci_register_dev() error path and the driver remove
path. If WCNSS delivers data in that window, the endpoint callback can
run with an already freed hci_dev and pass it to the Bluetooth core.
For qcom_smd endpoints, rpmsg_destroy_ept() closes the channel and clears
the callback under the channel recv_lock. The receive path holds the same
lock while invoking the callback, so destroying the endpoints first both
prevents new callbacks and serializes with any callback already running.
Destroy the command and ACL endpoints before hci_free_dev(). Keep
hci_unregister_dev() first during remove so the HCI core stops issuing
operations before the transport endpoints are shut down. In the full
registration-error cleanup path, return directly after freeing the hci_dev
to avoid falling through to the partial-construction labels and destroying
the endpoints twice. |
| In the Linux kernel, the following vulnerability has been resolved:
genetlink: pin family module during policy dump
The generic netlink controller's policy dump keeps pointers to the target
family's operation and policy tables in its callback state. A dump may be
split across multiple skbs and remain pending after the initial request.
Netlink pins the module which owns the dump callback, but in this case
that is the controller's owner rather than the target family's owner. The
target family can consequently be unregistered and its module unloaded
while a policy dump is pending. Advancing the dump then dereferences
policy memory from the unloaded module.
Take a reference to the target family's module when the dump starts.
Drop it from the error and done paths. This matches the lifetime for which
the dump context retains the family and policy pointers. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: cttimeout: prevent UAF during module unload
nf_ct_set_timeout() protects the timeout hook dereference and policy lookup
with rcu_read_lock(). cttimeout_exit(), however, unregisters the per-net
operations before it clears the hook.
This allows the following interleaving:
CPU 0 CPU 1
cttimeout_exit() nf_ct_set_timeout()
unregister_pernet_subsys() rcu_read_lock()
kfree(pernet) h = nf_ct_timeout_hook
h->timeout_find_get()
nfct_timeout_pernet()
The hook still points to ctnl_timeout_find_get() when CPU 1 looks up the
already freed per-net timeout list. KASAN reported:
BUG: KASAN: slab-use-after-free in ctnl_timeout_find_get
Read of size 8 by task poc/90
Call Trace:
ctnl_timeout_find_get+0x271/0x2a0 [nfnetlink_cttimeout]
nf_ct_set_timeout+0x7b/0x3c0
xt_ct_tg_check+0x724/0xb20
xt_check_target+0x234/0xa90
do_ipt_set_ctl+0x570/0x1270
Allocated by task 89:
__kmalloc_noprof+0x16e/0x460
ops_init+0x6d/0x420
register_pernet_operations+0x2f6/0x670
Freed by task 91:
kfree+0x131/0x390
ops_undo_list+0x3d4/0x730
unregister_pernet_operations+0x232/0x490
unregister_pernet_subsys+0x1c/0x30
cttimeout_exit+0x52/0x970 [nfnetlink_cttimeout]
Clear the hook and wait for existing readers before unregistering the
per-net operations. This blocks new policy lookups and ensures readers that
observed the hook finish before the per-net storage is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: cc2520: fix FIFOP work use-after-free
The FIFOP interrupt handler queues cc2520_fifop_irqwork. On removal,
cc2520_remove() only flushes the work. The devm-managed FIFOP IRQ
remains active until after ->remove() returns and can queue the work
again after that flush, allowing it to run after the private data is
released.
Disable the work with disable_work_sync() instead of flushing it, so
the handler can no longer queue it once removal begins. Destroy the
buffer mutex last, since the worker and the stop callback invoked
through ieee802154_unregister_hw() both take it.
Found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
landlock: Fix use-after-free of the source's parent directory
current_check_refer_path() reads old_dentry->d_parent without holding a
reference nor a lock on it, and then dereferences it in
collect_domain_accesses() and in the audit record.
A reference on a child does not pin its parent: __d_move() reassigns
dentry->d_parent and drops the reference the child held on its former
parent. hook_path_rename() is not affected because the rename path
calls lock_rename() before the hook, so the source cannot be reparented
under it. hook_path_link() has no such protection: filename_linkat()
holds a reference on the source dentry but neither locks nor references
its parent, so a concurrent rename(2) can reparent the source while
security_path_link() runs, and the former parent can then be removed and
freed while the hook walks it.
A process can trigger this after entering a Landlock domain that handles
at least one filesystem access right. The process can then race a
linkat(2) loop against rename(2) and rmdir(2):
BUG: KASAN: slab-use-after-free in collect_domain_accesses+0x278/0x290
Read of size 4 at addr ffff888160bd53f4 by task llrepro2/549
collect_domain_accesses+0x278/0x290
current_check_refer_path+0x952/0x1120
security_path_link+0x1be/0x320
filename_linkat+0x342/0x6d0
__x64_sys_linkat+0xfa/0x150
Freed by task 562:
kmem_cache_free+0x139/0x4c0
i_callback+0x4b/0x80
rcu_core+0x7dc/0x10a0
Take a reference on the dentry selected as the source parent, using
dget() for the common-mount-root case and dget_parent() otherwise.
Release it after the hierarchy walk and synchronous audit logging.
[mic: Clarify the caller, reachability, and reference handling] |
