| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic-v3: take an LPI reference in vgic_v3_save_pending_tables
vgic_v3_save_pending_tables() iterates dist->lpi_xa using xa_for_each()
and dereferences the returned struct vgic_irq in the loop body without
holding a reference on the LPI.
The xarray iterator only provides temporary RCU coverage while looking up
the current entry. That is not sufficient for this loop body, which reads
fields from struct vgic_irq and performs guest memory accesses before the
iteration completes.
A concurrent path can trigger this race: the irqfd cached injection path
(vgic_its_inject_cached_translation) obtains a transient LPI reference
via vgic_its_check_cache() without holding kvm->lock, vcpu->mutex,
config_lock, or its_lock. If guest ITS DISCARD then drops the cache and
ITE references under its_lock, the transient inject reference may become
the final one. When vgic_put_irq() drops it, the LPI is erased from
lpi_xa and freed via kfree_rcu(). Meanwhile, vgic_v3_save_pending_tables()
may still hold a stale pointer obtained from the xarray iterator and
dereference it after the RCU grace period completes.
Fix this by re-fetching each iterated LPI via vgic_get_irq(), which takes
a stable reference, and dropping it with vgic_put_irq() on all paths.
This matches the pattern already used by other lpi_xa iterators in the
vgic ITS code. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Add TLB flush after MES queue eviction/suspension
MES (Micro Engine Scheduler) does not perform heavy-weight TLB
invalidation after unmapping queues, unlike HWS which does this
automatically. This causes a race condition where in-flight DMA
descriptors can access memory that has been unmapped, leading to page
faults and GPU queue hangs during SVM page migration.
The issue manifests as KFDSVMRangeTest.MultiThreadMigrationTest
failures on gfx1151 (Strix Point) with XNACK mode 1 enabled - the GPU
compute queue hangs with packets submitted but never consumed.
Add kfd_flush_tlb() calls after MES queue removal in two locations:
- evict_process_queues_cpsch(): after all queues removed during eviction
- suspend_queues(): after debug/criu queue suspension (with mem_fence barrier)
This ensures all in-flight memory accesses from unmapped queues are
flushed before memory is freed or migrated.
(cherry picked from commit f5c4f88e0f9c45a8fb9dfac0c1df726c95e41b77) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable preemption in bpf_get_stackid
The get_perf_callchain call needs disabled preemption plus we need
it disabled as long as we access its returned trace entries buffer.
Note the bpf_get_stackid_pe function is executed already with
preemption disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
eventfs: Use children field for rcu head and add memory barriers
When an eventfs inode is freed, it sets ei->is_freed and then uses its
ei->list to add it to the srcu link list as the list field is a union with
the rcu list head. As the ei->list is used to iterate over an SRCU
protected list without taking the eventfs_mutex, there's nothing stopping
the iteration over that list to see the ei->rcu instead of the ei->list
and it will read a corrupt target.
To fix this, change the union of the rcu list head with the children list.
On freeing the eventfs inode, set the is_free and execute a smp_wmb()
before adding the eventfs inode to the SRCU list.
On iteration of the ei->children list, at the start, execute a smp_rmb()
and then read the is_freed of the ei to see if the children list is still
valid. If is_freed is set, then the ei_child read is not valid and the
loop should exit immediately. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix divide-by-zero in calculate_mcache_setting on zero viewport
If a plane reaches calculate_mcache_setting with a zero-area viewport,
calculate_mcache_setting exits early with num_mcaches == 0 and
mvmpg_width/height == 0. This will cause a divide-by-zero panic and can
also cause an underflow on num_mcaches.
Fix this by changing calculate_mcache_setting to bool and adding guards
after each calculate_mcache_row_bytes call. If num_mcaches or
mvmpg_width/height is zero, return a false. Callers will propagate the
failure as a rejected mode, which prevents the panic.
(cherry picked from commit 29c0f7c655f47bcbd575ff75e58480df6ec3c9da) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: cancel SSR work items during PCI shutdown
A reboot can crash the kernel if it overlaps with WLAN firmware crash
recovery (SSR). The crash is a NULL pointer dereference in the MHI teardown
path while freeing DMA-backed MHI contexts.
Simplified trace:
dma_free_attrs
mhi_deinit_dev_ctxt [mhi]
ath11k_pci_power_down [ath11k_pci]
ath11k_pci_shutdown [ath11k_pci]
device_shutdown
kernel_restart
On the host side, SSR is driven by the MHI RDDM callback, which queues
reset_work to perform device recovery. reset_work power-cycles the device
by calling ath11k_hif_power_down() followed by ath11k_hif_power_up(). The
power-down phase deinitializes MHI and frees DMA resources.
Shutdown/reboot runs fully asynchronously with this RDDM-driven SSR
recovery flow. As a result, the shutdown path
(ath11k_pci_shutdown() -> ath11k_pci_power_down()) can race with the SSR
recovery sequence.
Fix this by canceling SSR-related work items during PCI shutdown, marking
the device as unregistering, and serializing the RDDM callback path that
checks and queues reset_work. This ensures that no new SSR recovery work
can be queued once teardown has started, and that any in-flight recovery
work is fully synchronized before device power-down, preventing MHI
teardown and DMA resource freeing from running more than once.
Note: This issue only affects PCI/MHI-based devices. AHB-based ath11k
devices do not queue reset_work in normal SSR flows.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-04866.5-QCAHSPSWPL_V1_V2_SILICONZ_IOE-1 |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Block region delete during region creation
Expand the range lock, rename it "regions_lock", to disable region deletion
in the critical period between construct_region() and attach_target(), as
well as the period between device_add() and registering the remove actions.
Otherwise, userspace can confuse the kernel. It can violate the assumption
the region stays registered through the completion of cxl_add_to_region().
It can violate the assumption that devm_add_action_or_reset() is working
with a live 'struct cxl_region'.
It is ok for the region to disappear outside of those windows as that
mirrors device hotplug flows where the proper locks are held. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Resolve region deletion races
Sungwoo noticed that the sysfs trigger to delete a region may try to delete
a region multiple times. It also has no exclusion relative to the kernel
releasing the region via CXL root device teardown.
Instead of installing new cxl root devres actions per region, use the
existing root decoder unregistration event to remove all remaining regions.
An xarray of regions replaces a devres list of regions.
This handles 3 separate issues with the old approach:
1/ sysfs users racing to delete the same region: no longer possible now
that the regions_lock is held over the lookup and deletion.
2/ multiple actions triggering deletion of the same region: solved by
erasing regions while holding @regions_lock, and only proceeding on
successful erasure.
3/ userspace racing devres_release_all() to trigger the devres not found
warning: solved by sysfs unregistration not requiring a release action |
| In the Linux kernel, the following vulnerability has been resolved:
sockmap: Fix use-after-free in udp_bpf_recvmsg()
syzbot reported use-after-free of struct sk_msg in sk_msg_recvmsg(). [0]
sk_msg_recvmsg() peeks sk_msg from psock->ingress_msg under a lock,
but its processing is lockless.
Thus, sk_msg_recvmsg() must be serialised by callers, otherwise
multiple threads could touch the same sk_msg.
For example, TCP uses lock_sock(), and AF_UNIX uses unix_sk(sk)->iolock.
Initially, udp_bpf_recvmsg() had used lock_sock(), but the cited
commit removed it.
Let's serialise sk_msg_recvmsg() with lock_sock() in udp_bpf_recvmsg().
Note that holding spin_lock_bh(&sk->sk_receive_queue.lock) is not
an option due to copy_page_to_iter() in sk_msg_recvmsg().
[0]:
BUG: KASAN: slab-use-after-free in sk_msg_recvmsg+0xb54/0xc30 net/core/skmsg.c:428
Read of size 4 at addr ffff88814cdcf000 by task syz.0.24/6020
CPU: 1 UID: 0 PID: 6020 Comm: syz.0.24 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 01/13/2026
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xba/0x230 mm/kasan/report.c:482
kasan_report+0x117/0x150 mm/kasan/report.c:595
sk_msg_recvmsg+0xb54/0xc30 net/core/skmsg.c:428
udp_bpf_recvmsg+0x4bd/0xe00 net/ipv4/udp_bpf.c:84
inet_recvmsg+0x260/0x270 net/ipv4/af_inet.c:891
sock_recvmsg_nosec net/socket.c:1078 [inline]
sock_recvmsg+0x1a8/0x270 net/socket.c:1100
____sys_recvmsg+0x1e6/0x4a0 net/socket.c:2812
___sys_recvmsg+0x215/0x590 net/socket.c:2854
do_recvmmsg+0x334/0x800 net/socket.c:2949
__sys_recvmmsg net/socket.c:3023 [inline]
__do_sys_recvmmsg net/socket.c:3046 [inline]
__se_sys_recvmmsg net/socket.c:3039 [inline]
__x64_sys_recvmmsg+0x198/0x250 net/socket.c:3039
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe2/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fb319f9aeb9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fb31ad97028 EFLAGS: 00000246 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 00007fb31a216090 RCX: 00007fb319f9aeb9
RDX: 0000000000000001 RSI: 0000200000000400 RDI: 0000000000000004
RBP: 00007fb31a008c1f R08: 0000000000000000 R09: 0000000000000000
R10: 0000000040000021 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fb31a216128 R14: 00007fb31a216090 R15: 00007ffe21dd0a98
</TASK>
Allocated by task 6019:
kasan_save_stack mm/kasan/common.c:57 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:78
poison_kmalloc_redzone mm/kasan/common.c:398 [inline]
__kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:415
kasan_kmalloc include/linux/kasan.h:263 [inline]
__kmalloc_cache_noprof+0x3d1/0x6e0 mm/slub.c:5780
kmalloc_noprof include/linux/slab.h:957 [inline]
kzalloc_noprof include/linux/slab.h:1094 [inline]
alloc_sk_msg net/core/skmsg.c:510 [inline]
sk_psock_skb_ingress_self+0x60/0x350 net/core/skmsg.c:612
sk_psock_verdict_apply net/core/skmsg.c:1038 [inline]
sk_psock_verdict_recv+0x7d9/0x8d0 net/core/skmsg.c:1236
udp_read_skb+0x73e/0x7e0 net/ipv4/udp.c:2045
sk_psock_verdict_data_ready+0x12d/0x550 net/core/skmsg.c:1257
__udp_enqueue_schedule_skb+0xc54/0x10b0 net/ipv4/udp.c:1789
__udp_queue_rcv_skb net/ipv4/udp.c:2346 [inline]
udp_queue_rcv_one_skb+0xac5/0x19c0 net/ipv4/udp.c:2475
__udp4_lib_mcast_deliver+0xc06/0xcf0 net/ipv4/udp.c:2585
__udp4_lib_rcv+0x10f6/0x2620 net/ipv4/udp.c:2724
ip_protocol_deliver_rcu+0x282/0x440 net/ipv4/ip_input.c:207
ip_local_deliver_finish+0x3bb/0x6f0 net/ipv4/ip_input.c:241
NF_HOOK+0x336/0x3c0 include/linux/netfilter.h:318
dst_input include/net/dst.h:474 [inline]
ip_sublist_rcv_finish+0x221/0x2a0 net/ipv4/ip_input.c:584
ip_list_rcv_finish net/ipv4/ip_inp
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Replace waitqueue and flag with completion
The driver previously used a waitqueue along with an explicit
request_done flag, but without proper barriers around request_done.
An earlier patch by Gui-Dong Han <hanguidong02@gmail.com> attempted
to fix this by adding the missing memory barriers. Rather than
adding the barriers, this patch replaces the waitqueue+flag with
a completion, which is designed for this exact purpose. |
| In the Linux kernel, the following vulnerability has been resolved:
net: udp_tunnel: prevent double queueing in udp_tunnel_nic_device_sync
Yue Sun reported a use-after-free and debugobjects warning in
udp_tunnel_nic_device_sync_work() during concurrent device operations.
The workqueue core clears the internal pending bit before invoking the
worker. At that point, a concurrent thread can queue the work again.
When the already running worker eventually clears the work_pending flag
to 0, it mistakenly clears the flag for the newly queued instance.
udp_tunnel_nic_unregister() then observes work_pending as 0 and frees
the structure while the second work item is still active in the queue,
leading to UAF.
Fix this by returning early in udp_tunnel_nic_device_sync() if
work_pending is already set, preventing redundant work queueing. |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: imx93-blk-ctrl: Extract PHY as shared domain for DSI/CSI
The MIPI DSI and CSI domains share control bits for clock and reset, which
can lead to incorrect behavior if one domain disables the shared resource
while the other is still active.
To fix the issue, introduce a shared MIPI PHY power domain to own the
common resources and make DSI and CSI its subdomains. This ensures the
shared bits are properly managed and not disabled while still in use. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: convert pmsr_free_wk to wiphy_work to fix deadlock
When a netlink socket that owns a PMSR session is closed,
cfg80211_release_pmsr() clears the request's nl_portid and queues
pmsr_free_wk to call cfg80211_pmsr_process_abort() asynchronously.
If the interface tears down concurrently, cfg80211_pmsr_wdev_down()
is called under wiphy_lock and calls cancel_work_sync(&pmsr_free_wk)
to wait for any running work. The work function acquires wiphy_lock
via guard(wiphy) before calling process_abort.
This is a deadlock: wdev_down holds wiphy_lock and blocks inside
cancel_work_sync(); pmsr_free_wk blocks trying to acquire that same
wiphy_lock. Neither thread can proceed.
The same deadlock is reachable from cfg80211_leave_locked(), which
calls cfg80211_pmsr_wdev_down() for all interface types under
wiphy_lock.
Fix this by converting pmsr_free_wk from a plain work_struct to a
wiphy_work. The wiphy_work dispatcher holds wiphy_lock when running
work items, so the explicit guard(wiphy) in the work function is no
longer needed. wiphy_work_cancel() can be called safely while holding
wiphy_lock - since wiphy_lock prevents the work from running
concurrently, wiphy_work_cancel() never blocks, eliminating the
deadlock.
Remove the cancel_work_sync() for pmsr_free_wk from the
NETDEV_GOING_DOWN handler. cfg80211_leave(), called unconditionally
just before it, already cancels any pending work under wiphy_lock
via wiphy_work_cancel() inside cfg80211_pmsr_wdev_down(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: use wiphy work for socket owner autodisconnect
nl80211_netlink_notify() walks the cfg80211 wireless device list when a
NETLINK_GENERIC socket is released. If the socket owns a connection, the
notifier queues the embedded wdev->disconnect_wk work item.
That work is a plain work_struct today. NETDEV_GOING_DOWN cancels it, but a
NETLINK_URELEASE notifier that already observed conn_owner_nlportid can
queue it after that cancel returns. _cfg80211_unregister_wdev() then
removes the wdev from the list and waits for RCU readers, but
synchronize_net() does not drain work queued by such a reader.
Make the autodisconnect work a wiphy_work instead. The callback already
needs the wiphy mutex, and wiphy_work runs under that mutex. This lets
teardown cancel pending autodisconnect work while holding the mutex,
without a cancel_work_sync() vs. worker locking concern.
Also cancel the wiphy work after list_del_rcu() and synchronize_net(). Any
NETLINK_URELEASE notifier that had already reached the wdev list has then
either queued the work and it is removed, or can no longer find the wdev. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: core: wake eh reliably when using scsi_schedule_eh
Drivers which use the scsi_schedule_eh function to run the error handler
currently risk the error handler thread never waking once all commands are
timed out or inactive. There is no enforced memory order between setting
the host into error recovery state and counting busy commands. This can
result in a race with scsi_dec_host_busy where neither CPU sees both
conditions of all commands inactive and the host error state to request
waking the error handler.
To fix this, run the scsi_schedule_eh's scsi_eh_wakeup from a new work item
which will use rcu to ensure scsi_schedule_eh's call to scsi_host_busy will
occur after the error state is globally visible and will be seen by any
current scsi_dec_host_busy callers. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: serialize udp bearer replicast list updates
tipc_udp_rcast_add() and cleanup_bearer() both update ub->rcast.list with
list_add_rcu() / list_del_rcu(), but nothing serializes them. The add runs
from the encap receive softirq (via tipc_udp_rcast_disc()) without
rtnl_lock(), so it can race the cleanup delete and corrupt the list:
list_del corruption. prev->next should be ffff8880298d7ab8,
but was ffff88802449ad38. (prev=ffff888027e3ec98)
kernel BUG at lib/list_debug.c:62!
RIP: __list_del_entry_valid_or_report+0x17a/0x200
Workqueue: events cleanup_bearer
Call Trace:
cleanup_bearer (net/tipc/udp_media.c:811)
process_one_work (kernel/workqueue.c:3302)
worker_thread (kernel/workqueue.c:3466)
The bearer can be enabled from an unprivileged user namespace, as the
TIPCv2 generic-netlink ops carry no GENL_ADMIN_PERM.
Add a spinlock to struct udp_bearer and take it around the list_add_rcu()
in tipc_udp_rcast_add() and the list_del_rcu() loop in cleanup_bearer() so
the two writers can no longer corrupt the list.
Reject a duplicate peer under the same lock before allocating, and remove
tipc_udp_is_known_peer(). The old lockless pre-check in
tipc_udp_rcast_disc() was racy: two softirqs discovering the same peer
could both find it absent and add it twice.
cleanup_bearer() runs from a workqueue after tipc_udp_disable() clears the
bearer's up bit, so an encap softirq can still reach tipc_udp_rcast_add()
and add a peer after cleanup_bearer() has already emptied the list, leaking
that entry when the bearer is freed. Mark the bearer disabled under
rcast_lock once the list is emptied and refuse further additions. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix context pstate override handling
There are several problems in the context pstate handling code.
The most serious ones are potential use-after-free and NULL pointer
dereferences at context initialization time. Both are due
amdgpu_ctx_init() not holding the adev->pm.stable_pstate_ctx_lock, which
is otherwise used from both sysfs and the context code itself for
modifying and clearing the stored context pointer.
Second issue is that context fini can trample over the pstate
configuration set via sysfs. This is due the restore state
(ctx->stable_pstate) being saved at context init time, and not if, or when
the context actually changes the pstate. As the context exits it will
therefore incorrectly restore to what was set before the sysfs override
was requested.
The simplest fix is to drastically simplify how the state is tracked, by
clearly defining the points at which pstate ownership is taken and
released, and to handle all transitions under the correct lock.
Instead of at context init time, the previous state is saved only at the
point the context overrides the current state, and is restored on context
exit only if the context is still the owner of the current override state.
(cherry picked from commit 1b5e413713c0a93bc1818394d0ce49aaad21bd27) |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - protect service table iterations with service_lock
The service_table list is protected by service_lock when entries are
added or removed (in adf_service_add() and adf_service_remove()), but
several functions iterate over the list without holding this lock.
A concurrent adf_service_register() or adf_service_unregister() call
could modify the list during traversal, leading to list corruption or
a use-after-free.
Fix this by holding service_lock across all list_for_each_entry()
iterations of service_table in adf_dev_init(), adf_dev_start(),
adf_dev_stop(), adf_dev_shutdown(), adf_dev_restarting_notify(),
adf_dev_restarted_notify(), and adf_error_notifier().
The lock ordering is safe: callers of the static helpers (adf_dev_up()
and adf_dev_down()) acquire state_lock before service_lock, and no
event_hld callback or service_lock holder ever acquires state_lock in
the reverse order. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: move to two-stage removal scheme
Like previous patches for x_tables, follow same pattern in ebtables.
We can't reuse xt helpers: ebt_table struct layout is incompatible.
table->ops assignment is now done while still holding the ebt mutex
to make sure we never expose partially-filled table struct. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: bridge: eb_tables: close module init race
sashiko reports for unrelated patch:
Does the core ebtables initialization in ebtables.c suffer from a similar race?
Once nf_register_sockopt() completes, the sockopts are exposed globally.
sockopt has to be registered last, just like in ip/ip6/arptables. |
