| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to avoid f2fs_bug_on() in dec_valid_node_count()
As Yanming reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215897
I have encountered a bug in F2FS file system in kernel v5.17.
The kernel should enable CONFIG_KASAN=y and CONFIG_KASAN_INLINE=y. You can
reproduce the bug by running the following commands:
The kernel message is shown below:
kernel BUG at fs/f2fs/f2fs.h:2511!
Call Trace:
f2fs_remove_inode_page+0x2a2/0x830
f2fs_evict_inode+0x9b7/0x1510
evict+0x282/0x4e0
do_unlinkat+0x33a/0x540
__x64_sys_unlinkat+0x8e/0xd0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
The root cause is: .total_valid_block_count or .total_valid_node_count
could fuzzed to zero, then once dec_valid_node_count() was called, it
will cause BUG_ON(), this patch fixes to print warning info and set
SBI_NEED_FSCK into CP instead of panic. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: rzg2l_wdt: Fix 'BUG: Invalid wait context'
This patch fixes the issue 'BUG: Invalid wait context' during restart()
callback by using clk_prepare_enable() instead of pm_runtime_get_sync()
for turning on the clocks during restart.
This issue is noticed when testing with renesas_defconfig.
[ 42.213802] reboot: Restarting system
[ 42.217860]
[ 42.219364] =============================
[ 42.223368] [ BUG: Invalid wait context ]
[ 42.227372] 5.17.0-rc5-arm64-renesas-00002-g10393723e35e #522 Not tainted
[ 42.234153] -----------------------------
[ 42.238155] systemd-shutdow/1 is trying to lock:
[ 42.242766] ffff00000a650828 (&genpd->mlock){+.+.}-{3:3}, at: genpd_lock_mtx+0x14/0x20
[ 42.250709] other info that might help us debug this:
[ 42.255753] context-{4:4}
[ 42.258368] 2 locks held by systemd-shutdow/1:
[ 42.262806] #0: ffff80000944e1c8 (system_transition_mutex#2){+.+.}-{3:3}, at: __do_sys_reboot+0xd0/0x250
[ 42.272388] #1: ffff8000094c4e40 (rcu_read_lock){....}-{1:2}, at: atomic_notifier_call_chain+0x0/0x150
[ 42.281795] stack backtrace:
[ 42.284672] CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.17.0-rc5-arm64-renesas-00002-g10393723e35e #522
[ 42.294577] Hardware name: Renesas SMARC EVK based on r9a07g044c2 (DT)
[ 42.301096] Call trace:
[ 42.303538] dump_backtrace+0xcc/0xd8
[ 42.307203] show_stack+0x14/0x30
[ 42.310517] dump_stack_lvl+0x88/0xb0
[ 42.314180] dump_stack+0x14/0x2c
[ 42.317492] __lock_acquire+0x1b24/0x1b50
[ 42.321502] lock_acquire+0x120/0x3a8
[ 42.325162] __mutex_lock+0x84/0x8f8
[ 42.328737] mutex_lock_nested+0x30/0x58
[ 42.332658] genpd_lock_mtx+0x14/0x20
[ 42.336319] genpd_runtime_resume+0xc4/0x228
[ 42.340587] __rpm_callback+0x44/0x170
[ 42.344337] rpm_callback+0x64/0x70
[ 42.347824] rpm_resume+0x4e0/0x6b8
[ 42.351310] __pm_runtime_resume+0x50/0x78
[ 42.355404] rzg2l_wdt_restart+0x28/0x68
[ 42.359329] watchdog_restart_notifier+0x1c/0x30
[ 42.363943] atomic_notifier_call_chain+0x94/0x150
[ 42.368732] do_kernel_restart+0x24/0x30
[ 42.372652] machine_restart+0x44/0x70
[ 42.376399] kernel_restart+0x3c/0x60
[ 42.380058] __do_sys_reboot+0x228/0x250
[ 42.383977] __arm64_sys_reboot+0x20/0x28
[ 42.387983] invoke_syscall+0x40/0xf8 |
| In the Linux kernel, the following vulnerability has been resolved:
blk-iolatency: Fix inflight count imbalances and IO hangs on offline
iolatency needs to track the number of inflight IOs per cgroup. As this
tracking can be expensive, it is disabled when no cgroup has iolatency
configured for the device. To ensure that the inflight counters stay
balanced, iolatency_set_limit() freezes the request_queue while manipulating
the enabled counter, which ensures that no IO is in flight and thus all
counters are zero.
Unfortunately, iolatency_set_limit() isn't the only place where the enabled
counter is manipulated. iolatency_pd_offline() can also dec the counter and
trigger disabling. As this disabling happens without freezing the q, this
can easily happen while some IOs are in flight and thus leak the counts.
This can be easily demonstrated by turning on iolatency on an one empty
cgroup while IOs are in flight in other cgroups and then removing the
cgroup. Note that iolatency shouldn't have been enabled elsewhere in the
system to ensure that removing the cgroup disables iolatency for the whole
device.
The following keeps flipping on and off iolatency on sda:
echo +io > /sys/fs/cgroup/cgroup.subtree_control
while true; do
mkdir -p /sys/fs/cgroup/test
echo '8:0 target=100000' > /sys/fs/cgroup/test/io.latency
sleep 1
rmdir /sys/fs/cgroup/test
sleep 1
done
and there's concurrent fio generating direct rand reads:
fio --name test --filename=/dev/sda --direct=1 --rw=randread \
--runtime=600 --time_based --iodepth=256 --numjobs=4 --bs=4k
while monitoring with the following drgn script:
while True:
for css in css_for_each_descendant_pre(prog['blkcg_root'].css.address_of_()):
for pos in hlist_for_each(container_of(css, 'struct blkcg', 'css').blkg_list):
blkg = container_of(pos, 'struct blkcg_gq', 'blkcg_node')
pd = blkg.pd[prog['blkcg_policy_iolatency'].plid]
if pd.value_() == 0:
continue
iolat = container_of(pd, 'struct iolatency_grp', 'pd')
inflight = iolat.rq_wait.inflight.counter.value_()
if inflight:
print(f'inflight={inflight} {disk_name(blkg.q.disk).decode("utf-8")} '
f'{cgroup_path(css.cgroup).decode("utf-8")}')
time.sleep(1)
The monitoring output looks like the following:
inflight=1 sda /user.slice
inflight=1 sda /user.slice
...
inflight=14 sda /user.slice
inflight=13 sda /user.slice
inflight=17 sda /user.slice
inflight=15 sda /user.slice
inflight=18 sda /user.slice
inflight=17 sda /user.slice
inflight=20 sda /user.slice
inflight=19 sda /user.slice <- fio stopped, inflight stuck at 19
inflight=19 sda /user.slice
inflight=19 sda /user.slice
If a cgroup with stuck inflight ends up getting throttled, the throttled IOs
will never get issued as there's no completion event to wake it up leading
to an indefinite hang.
This patch fixes the bug by unifying enable handling into a work item which
is automatically kicked off from iolatency_set_min_lat_nsec() which is
called from both iolatency_set_limit() and iolatency_pd_offline() paths.
Punting to a work item is necessary as iolatency_pd_offline() is called
under spinlocks while freezing a request_queue requires a sleepable context.
This also simplifies the code reducing LOC sans the comments and avoids the
unnecessary freezes which were happening whenever a cgroup's latency target
is newly set or cleared. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: gadget: Replace list_for_each_entry_safe() if using giveback
The list_for_each_entry_safe() macro saves the current item (n) and
the item after (n+1), so that n can be safely removed without
corrupting the list. However, when traversing the list and removing
items using gadget giveback, the DWC3 lock is briefly released,
allowing other routines to execute. There is a situation where, while
items are being removed from the cancelled_list using
dwc3_gadget_ep_cleanup_cancelled_requests(), the pullup disable
routine is running in parallel (due to UDC unbind). As the cleanup
routine removes n, and the pullup disable removes n+1, once the
cleanup retakes the DWC3 lock, it references a request who was already
removed/handled. With list debug enabled, this leads to a panic.
Ensure all instances of the macro are replaced where gadget giveback
is used.
Example call stack:
Thread#1:
__dwc3_gadget_ep_set_halt() - CLEAR HALT
-> dwc3_gadget_ep_cleanup_cancelled_requests()
->list_for_each_entry_safe()
->dwc3_gadget_giveback(n)
->dwc3_gadget_del_and_unmap_request()- n deleted[cancelled_list]
->spin_unlock
->Thread#2 executes
...
->dwc3_gadget_giveback(n+1)
->Already removed!
Thread#2:
dwc3_gadget_pullup()
->waiting for dwc3 spin_lock
...
->Thread#1 released lock
->dwc3_stop_active_transfers()
->dwc3_remove_requests()
->fetches n+1 item from cancelled_list (n removed by Thread#1)
->dwc3_gadget_giveback()
->dwc3_gadget_del_and_unmap_request()- n+1 deleted[cancelled_list]
->spin_unlock |
| In the Linux kernel, the following vulnerability has been resolved:
tty: goldfish: Use tty_port_destroy() to destroy port
In goldfish_tty_probe(), the port initialized through tty_port_init()
should be destroyed in error paths.In goldfish_tty_remove(), qtty->port
also should be destroyed or else might leak resources.
Fix the above by calling tty_port_destroy(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: Add vblank register/unregister callback functions
We encountered a kernel panic issue that callback data will be NULL when
it's using in ovl irq handler. There is a timing issue between
mtk_disp_ovl_irq_handler() and mtk_ovl_disable_vblank().
To resolve this issue, we use the flow to register/unregister vblank cb:
- Register callback function and callback data when crtc creates.
- Unregister callback function and callback data when crtc destroies.
With this solution, we can assure callback data will not be NULL when
vblank is disable. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: denali: Use managed device resources
All of the resources used by this driver has managed interfaces, so use
them. Otherwise we will get the following splat:
[ 4.472703] denali-nand-pci 0000:00:05.0: timeout while waiting for irq 0x1000
[ 4.474071] denali-nand-pci: probe of 0000:00:05.0 failed with error -5
[ 4.473538] nand: No NAND device found
[ 4.474068] BUG: unable to handle page fault for address: ffffc90005000410
[ 4.475169] #PF: supervisor write access in kernel mode
[ 4.475579] #PF: error_code(0x0002) - not-present page
[ 4.478362] RIP: 0010:iowrite32+0x9/0x50
[ 4.486068] Call Trace:
[ 4.486269] <IRQ>
[ 4.486443] denali_isr+0x15b/0x300 [denali]
[ 4.486788] ? denali_direct_write+0x50/0x50 [denali]
[ 4.487189] __handle_irq_event_percpu+0x161/0x3b0
[ 4.487571] handle_irq_event+0x7d/0x1b0
[ 4.487884] handle_fasteoi_irq+0x2b0/0x770
[ 4.488219] __common_interrupt+0xc8/0x1b0
[ 4.488549] common_interrupt+0x9a/0xc0 |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: governor: Use kobject release() method to free dbs_data
The struct dbs_data embeds a struct gov_attr_set and
the struct gov_attr_set embeds a kobject. Since every kobject must have
a release() method and we can't use kfree() to free it directly,
so introduce cpufreq_dbs_data_release() to release the dbs_data via
the kobject::release() method. This fixes the calltrace like below:
ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x34
WARNING: CPU: 12 PID: 810 at lib/debugobjects.c:505 debug_print_object+0xb8/0x100
Modules linked in:
CPU: 12 PID: 810 Comm: sh Not tainted 5.16.0-next-20220120-yocto-standard+ #536
Hardware name: Marvell OcteonTX CN96XX board (DT)
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : debug_print_object+0xb8/0x100
lr : debug_print_object+0xb8/0x100
sp : ffff80001dfcf9a0
x29: ffff80001dfcf9a0 x28: 0000000000000001 x27: ffff0001464f0000
x26: 0000000000000000 x25: ffff8000090e3f00 x24: ffff80000af60210
x23: ffff8000094dfb78 x22: ffff8000090e3f00 x21: ffff0001080b7118
x20: ffff80000aeb2430 x19: ffff800009e8f5e0 x18: 0000000000000000
x17: 0000000000000002 x16: 00004d62e58be040 x15: 013590470523aff8
x14: ffff8000090e1828 x13: 0000000001359047 x12: 00000000f5257d14
x11: 0000000000040591 x10: 0000000066c1ffea x9 : ffff8000080d15e0
x8 : ffff80000a1765a8 x7 : 0000000000000000 x6 : 0000000000000001
x5 : ffff800009e8c000 x4 : ffff800009e8c760 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0001474ed040
Call trace:
debug_print_object+0xb8/0x100
__debug_check_no_obj_freed+0x1d0/0x25c
debug_check_no_obj_freed+0x24/0xa0
kfree+0x11c/0x440
cpufreq_dbs_governor_exit+0xa8/0xac
cpufreq_exit_governor+0x44/0x90
cpufreq_set_policy+0x29c/0x570
store_scaling_governor+0x110/0x154
store+0xb0/0xe0
sysfs_kf_write+0x58/0x84
kernfs_fop_write_iter+0x12c/0x1c0
new_sync_write+0xf0/0x18c
vfs_write+0x1cc/0x220
ksys_write+0x74/0x100
__arm64_sys_write+0x28/0x3c
invoke_syscall.constprop.0+0x58/0xf0
do_el0_svc+0x70/0x170
el0_svc+0x54/0x190
el0t_64_sync_handler+0xa4/0x130
el0t_64_sync+0x1a0/0x1a4
irq event stamp: 189006
hardirqs last enabled at (189005): [<ffff8000080849d0>] finish_task_switch.isra.0+0xe0/0x2c0
hardirqs last disabled at (189006): [<ffff8000090667a4>] el1_dbg+0x24/0xa0
softirqs last enabled at (188966): [<ffff8000080106d0>] __do_softirq+0x4b0/0x6a0
softirqs last disabled at (188957): [<ffff80000804a618>] __irq_exit_rcu+0x108/0x1a4
[ rjw: Because can be freed by the gov_attr_set_put() in
cpufreq_dbs_governor_exit() now, it is also necessary to put the
invocation of the governor ->exit() callback into the new
cpufreq_dbs_data_release() function. ] |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: dw9714: Disable the regulator when the driver fails to probe
When the driver fails to probe, we will get the following splat:
[ 59.305988] ------------[ cut here ]------------
[ 59.306417] WARNING: CPU: 2 PID: 395 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0
[ 59.310345] RIP: 0010:_regulator_put+0x3ec/0x4e0
[ 59.318362] Call Trace:
[ 59.318582] <TASK>
[ 59.318765] regulator_put+0x1f/0x30
[ 59.319058] devres_release_group+0x319/0x3d0
[ 59.319420] i2c_device_probe+0x766/0x940
Fix this by disabling the regulator in error handling. |
| A vulnerability exists in F5OS-A software that allows a highly privileged authenticated attacker to access sensitive FIPS hardware security module (HSM) information on F5 rSeries systems. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: clk-rcg2: Update logic to calculate D value for RCG
The display pixel clock has a requirement on certain newer platforms to
support M/N as (2/3) and the final D value calculated results in
underflow errors.
As the current implementation does not check for D value is within
the accepted range for a given M & N value. Update the logic to
calculate the final D value based on the range. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
cpsw_ethtool_begin directly returns the result of pm_runtime_get_sync
when successful.
pm_runtime_get_sync returns -error code on failure and 0 on successful
resume but also 1 when the device is already active. So the common case
for cpsw_ethtool_begin is to return 1. That leads to inconsistent calls
to pm_runtime_put in the call-chain so that pm_runtime_put is called
one too many times and as result leaving the cpsw dev behind suspended.
The suspended cpsw dev leads to an access violation later on by
different parts of the cpsw driver.
Fix this by calling the return-friendly pm_runtime_resume_and_get
function. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix 'scheduling while atomic' on aux critical err interrupt
There's a kernel BUG splat on processing aux critical error
interrupts in ice_misc_intr():
[ 2100.917085] BUG: scheduling while atomic: swapper/15/0/0x00010000
...
[ 2101.060770] Call Trace:
[ 2101.063229] <IRQ>
[ 2101.065252] dump_stack+0x41/0x60
[ 2101.068587] __schedule_bug.cold.100+0x4c/0x58
[ 2101.073060] __schedule+0x6a4/0x830
[ 2101.076570] schedule+0x35/0xa0
[ 2101.079727] schedule_preempt_disabled+0xa/0x10
[ 2101.084284] __mutex_lock.isra.7+0x310/0x420
[ 2101.088580] ? ice_misc_intr+0x201/0x2e0 [ice]
[ 2101.093078] ice_send_event_to_aux+0x25/0x70 [ice]
[ 2101.097921] ice_misc_intr+0x220/0x2e0 [ice]
[ 2101.102232] __handle_irq_event_percpu+0x40/0x180
[ 2101.106965] handle_irq_event_percpu+0x30/0x80
[ 2101.111434] handle_irq_event+0x36/0x53
[ 2101.115292] handle_edge_irq+0x82/0x190
[ 2101.119148] handle_irq+0x1c/0x30
[ 2101.122480] do_IRQ+0x49/0xd0
[ 2101.125465] common_interrupt+0xf/0xf
[ 2101.129146] </IRQ>
...
As Andrew correctly mentioned previously[0], the following call
ladder happens:
ice_misc_intr() <- hardirq
ice_send_event_to_aux()
device_lock()
mutex_lock()
might_sleep()
might_resched() <- oops
Add a new PF state bit which indicates that an aux critical error
occurred and serve it in ice_service_task() in process context.
The new ice_pf::oicr_err_reg is read-write in both hardirq and
process contexts, but only 3 bits of non-critical data probably
aren't worth explicit synchronizing (and they're even in the same
byte [31:24]).
[0] https://lore.kernel.org/all/YeSRUVmrdmlUXHDn@lunn.ch |
| In the Linux kernel, the following vulnerability has been resolved:
igc: avoid kernel warning when changing RX ring parameters
Calling ethtool changing the RX ring parameters like this:
$ ethtool -G eth0 rx 1024
on igc triggers kernel warnings like this:
[ 225.198467] ------------[ cut here ]------------
[ 225.198473] Missing unregister, handled but fix driver
[ 225.198485] WARNING: CPU: 7 PID: 959 at net/core/xdp.c:168
xdp_rxq_info_reg+0x79/0xd0
[...]
[ 225.198601] Call Trace:
[ 225.198604] <TASK>
[ 225.198609] igc_setup_rx_resources+0x3f/0xe0 [igc]
[ 225.198617] igc_ethtool_set_ringparam+0x30e/0x450 [igc]
[ 225.198626] ethnl_set_rings+0x18a/0x250
[ 225.198631] genl_family_rcv_msg_doit+0xca/0x110
[ 225.198637] genl_rcv_msg+0xce/0x1c0
[ 225.198640] ? rings_prepare_data+0x60/0x60
[ 225.198644] ? genl_get_cmd+0xd0/0xd0
[ 225.198647] netlink_rcv_skb+0x4e/0xf0
[ 225.198652] genl_rcv+0x24/0x40
[ 225.198655] netlink_unicast+0x20e/0x330
[ 225.198659] netlink_sendmsg+0x23f/0x480
[ 225.198663] sock_sendmsg+0x5b/0x60
[ 225.198667] __sys_sendto+0xf0/0x160
[ 225.198671] ? handle_mm_fault+0xb2/0x280
[ 225.198676] ? do_user_addr_fault+0x1eb/0x690
[ 225.198680] __x64_sys_sendto+0x20/0x30
[ 225.198683] do_syscall_64+0x38/0x90
[ 225.198687] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 225.198693] RIP: 0033:0x7f7ae38ac3aa
igc_ethtool_set_ringparam() copies the igc_ring structure but neglects to
reset the xdp_rxq_info member before calling igc_setup_rx_resources().
This in turn calls xdp_rxq_info_reg() with an already registered xdp_rxq_info.
Make sure to unregister the xdp_rxq_info structure first in
igc_setup_rx_resources. |
| In the Linux kernel, the following vulnerability has been resolved:
net: asix: add proper error handling of usb read errors
Syzbot once again hit uninit value in asix driver. The problem still the
same -- asix_read_cmd() reads less bytes, than was requested by caller.
Since all read requests are performed via asix_read_cmd() let's catch
usb related error there and add __must_check notation to be sure all
callers actually check return value.
So, this patch adds sanity check inside asix_read_cmd(), that simply
checks if bytes read are not less, than was requested and adds missing
error handling of asix_read_cmd() all across the driver code. |
| In the Linux kernel, the following vulnerability has been resolved:
ptp: unregister virtual clocks when unregistering physical clock.
When unregistering a physical clock which has some virtual clocks,
unregister the virtual clocks with it.
This fixes the following oops, which can be triggered by unloading
a driver providing a PTP clock when it has enabled virtual clocks:
BUG: unable to handle page fault for address: ffffffffc04fc4d8
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:ptp_vclock_read+0x31/0xb0
Call Trace:
timecounter_read+0xf/0x50
ptp_vclock_refresh+0x2c/0x50
? ptp_clock_release+0x40/0x40
ptp_aux_kworker+0x17/0x30
kthread_worker_fn+0x9b/0x240
? kthread_should_park+0x30/0x30
kthread+0xe2/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: atmel: Add missing of_node_put() in at91sam9g20ek_audio_probe
This node pointer is returned by of_parse_phandle() with refcount
incremented in this function.
Calling of_node_put() to avoid the refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
media: stk1160: If start stream fails, return buffers with VB2_BUF_STATE_QUEUED
If the callback 'start_streaming' fails, then all
queued buffers in the driver should be returned with
state 'VB2_BUF_STATE_QUEUED'. Currently, they are
returned with 'VB2_BUF_STATE_ERROR' which is wrong.
Fix this. This also fixes the warning:
[ 65.583633] WARNING: CPU: 5 PID: 593 at drivers/media/common/videobuf2/videobuf2-core.c:1612 vb2_start_streaming+0xd4/0x160 [videobuf2_common]
[ 65.585027] Modules linked in: snd_usb_audio snd_hwdep snd_usbmidi_lib snd_rawmidi snd_soc_hdmi_codec dw_hdmi_i2s_audio saa7115 stk1160 videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc crct10dif_ce panfrost snd_soc_simple_card snd_soc_audio_graph_card snd_soc_spdif_tx snd_soc_simple_card_utils gpu_sched phy_rockchip_pcie snd_soc_rockchip_i2s rockchipdrm analogix_dp dw_mipi_dsi dw_hdmi cec drm_kms_helper drm rtc_rk808 rockchip_saradc industrialio_triggered_buffer kfifo_buf rockchip_thermal pcie_rockchip_host ip_tables x_tables ipv6
[ 65.589383] CPU: 5 PID: 593 Comm: v4l2src0:src Tainted: G W 5.16.0-rc4-62408-g32447129cb30-dirty #14
[ 65.590293] Hardware name: Radxa ROCK Pi 4B (DT)
[ 65.590696] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 65.591304] pc : vb2_start_streaming+0xd4/0x160 [videobuf2_common]
[ 65.591850] lr : vb2_start_streaming+0x6c/0x160 [videobuf2_common]
[ 65.592395] sp : ffff800012bc3ad0
[ 65.592685] x29: ffff800012bc3ad0 x28: 0000000000000000 x27: ffff800012bc3cd8
[ 65.593312] x26: 0000000000000000 x25: ffff00000d8a7800 x24: 0000000040045612
[ 65.593938] x23: ffff800011323000 x22: ffff800012bc3cd8 x21: ffff00000908a8b0
[ 65.594562] x20: ffff00000908a8c8 x19: 00000000fffffff4 x18: ffffffffffffffff
[ 65.595188] x17: 000000040044ffff x16: 00400034b5503510 x15: ffff800011323f78
[ 65.595813] x14: ffff000013163886 x13: ffff000013163885 x12: 00000000000002ce
[ 65.596439] x11: 0000000000000028 x10: 0000000000000001 x9 : 0000000000000228
[ 65.597064] x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff726c5e78
[ 65.597690] x5 : ffff800012bc3990 x4 : 0000000000000000 x3 : ffff000009a34880
[ 65.598315] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000007cd99f0
[ 65.598940] Call trace:
[ 65.599155] vb2_start_streaming+0xd4/0x160 [videobuf2_common]
[ 65.599672] vb2_core_streamon+0x17c/0x1a8 [videobuf2_common]
[ 65.600179] vb2_streamon+0x54/0x88 [videobuf2_v4l2]
[ 65.600619] vb2_ioctl_streamon+0x54/0x60 [videobuf2_v4l2]
[ 65.601103] v4l_streamon+0x3c/0x50 [videodev]
[ 65.601521] __video_do_ioctl+0x1a4/0x428 [videodev]
[ 65.601977] video_usercopy+0x320/0x828 [videodev]
[ 65.602419] video_ioctl2+0x3c/0x58 [videodev]
[ 65.602830] v4l2_ioctl+0x60/0x90 [videodev]
[ 65.603227] __arm64_sys_ioctl+0xa8/0xe0
[ 65.603576] invoke_syscall+0x54/0x118
[ 65.603911] el0_svc_common.constprop.3+0x84/0x100
[ 65.604332] do_el0_svc+0x34/0xa0
[ 65.604625] el0_svc+0x1c/0x50
[ 65.604897] el0t_64_sync_handler+0x88/0xb0
[ 65.605264] el0t_64_sync+0x16c/0x170
[ 65.605587] ---[ end trace 578e0ba07742170d ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
block: don't delete queue kobject before its children
kobjects aren't supposed to be deleted before their child kobjects are
deleted. Apparently this is usually benign; however, a WARN will be
triggered if one of the child kobjects has a named attribute group:
sysfs group 'modes' not found for kobject 'crypto'
WARNING: CPU: 0 PID: 1 at fs/sysfs/group.c:278 sysfs_remove_group+0x72/0x80
...
Call Trace:
sysfs_remove_groups+0x29/0x40 fs/sysfs/group.c:312
__kobject_del+0x20/0x80 lib/kobject.c:611
kobject_cleanup+0xa4/0x140 lib/kobject.c:696
kobject_release lib/kobject.c:736 [inline]
kref_put include/linux/kref.h:65 [inline]
kobject_put+0x53/0x70 lib/kobject.c:753
blk_crypto_sysfs_unregister+0x10/0x20 block/blk-crypto-sysfs.c:159
blk_unregister_queue+0xb0/0x110 block/blk-sysfs.c:962
del_gendisk+0x117/0x250 block/genhd.c:610
Fix this by moving the kobject_del() and the corresponding
kobject_uevent() to the correct place. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix missing free nid in f2fs_handle_failed_inode
This patch fixes xfstests/generic/475 failure.
[ 293.680694] F2FS-fs (dm-1): May loss orphan inode, run fsck to fix.
[ 293.685358] Buffer I/O error on dev dm-1, logical block 8388592, async page read
[ 293.691527] Buffer I/O error on dev dm-1, logical block 8388592, async page read
[ 293.691764] sh (7615): drop_caches: 3
[ 293.691819] sh (7616): drop_caches: 3
[ 293.694017] Buffer I/O error on dev dm-1, logical block 1, async page read
[ 293.695659] sh (7618): drop_caches: 3
[ 293.696979] sh (7617): drop_caches: 3
[ 293.700290] sh (7623): drop_caches: 3
[ 293.708621] sh (7626): drop_caches: 3
[ 293.711386] sh (7628): drop_caches: 3
[ 293.711825] sh (7627): drop_caches: 3
[ 293.716738] sh (7630): drop_caches: 3
[ 293.719613] sh (7632): drop_caches: 3
[ 293.720971] sh (7633): drop_caches: 3
[ 293.727741] sh (7634): drop_caches: 3
[ 293.730783] sh (7636): drop_caches: 3
[ 293.732681] sh (7635): drop_caches: 3
[ 293.732988] sh (7637): drop_caches: 3
[ 293.738836] sh (7639): drop_caches: 3
[ 293.740568] sh (7641): drop_caches: 3
[ 293.743053] sh (7640): drop_caches: 3
[ 293.821889] ------------[ cut here ]------------
[ 293.824654] kernel BUG at fs/f2fs/node.c:3334!
[ 293.826226] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[ 293.828713] CPU: 0 PID: 7653 Comm: umount Tainted: G OE 5.17.0-rc1-custom #1
[ 293.830946] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[ 293.832526] RIP: 0010:f2fs_destroy_node_manager+0x33f/0x350 [f2fs]
[ 293.833905] Code: e8 d6 3d f9 f9 48 8b 45 d0 65 48 2b 04 25 28 00 00 00 75 1a 48 81 c4 28 03 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b
[ 293.837783] RSP: 0018:ffffb04ec31e7a20 EFLAGS: 00010202
[ 293.839062] RAX: 0000000000000001 RBX: ffff9df947db2eb8 RCX: 0000000080aa0072
[ 293.840666] RDX: 0000000000000000 RSI: ffffe86c0432a140 RDI: ffffffffc0b72a21
[ 293.842261] RBP: ffffb04ec31e7d70 R08: ffff9df94ca85780 R09: 0000000080aa0072
[ 293.843909] R10: ffff9df94ca85700 R11: ffff9df94e1ccf58 R12: ffff9df947db2e00
[ 293.845594] R13: ffff9df947db2ed0 R14: ffff9df947db2eb8 R15: ffff9df947db2eb8
[ 293.847855] FS: 00007f5a97379800(0000) GS:ffff9dfa77c00000(0000) knlGS:0000000000000000
[ 293.850647] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 293.852940] CR2: 00007f5a97528730 CR3: 000000010bc76005 CR4: 0000000000370ef0
[ 293.854680] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 293.856423] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 293.858380] Call Trace:
[ 293.859302] <TASK>
[ 293.860311] ? ttwu_do_wakeup+0x1c/0x170
[ 293.861800] ? ttwu_do_activate+0x6d/0xb0
[ 293.863057] ? _raw_spin_unlock_irqrestore+0x29/0x40
[ 293.864411] ? try_to_wake_up+0x9d/0x5e0
[ 293.865618] ? debug_smp_processor_id+0x17/0x20
[ 293.866934] ? debug_smp_processor_id+0x17/0x20
[ 293.868223] ? free_unref_page+0xbf/0x120
[ 293.869470] ? __free_slab+0xcb/0x1c0
[ 293.870614] ? preempt_count_add+0x7a/0xc0
[ 293.871811] ? __slab_free+0xa0/0x2d0
[ 293.872918] ? __wake_up_common_lock+0x8a/0xc0
[ 293.874186] ? __slab_free+0xa0/0x2d0
[ 293.875305] ? free_inode_nonrcu+0x20/0x20
[ 293.876466] ? free_inode_nonrcu+0x20/0x20
[ 293.877650] ? debug_smp_processor_id+0x17/0x20
[ 293.878949] ? call_rcu+0x11a/0x240
[ 293.880060] ? f2fs_destroy_stats+0x59/0x60 [f2fs]
[ 293.881437] ? kfree+0x1fe/0x230
[ 293.882674] f2fs_put_super+0x160/0x390 [f2fs]
[ 293.883978] generic_shutdown_super+0x7a/0x120
[ 293.885274] kill_block_super+0x27/0x50
[ 293.886496] kill_f2fs_super+0x7f/0x100 [f2fs]
[ 293.887806] deactivate_locked_super+0x35/0xa0
[ 293.889271] deactivate_super+0x40/0x50
[ 293.890513] cleanup_mnt+0x139/0x190
[ 293.891689] __cleanup_mnt+0x12/0x20
[ 293.892850] task_work_run+0x64/0xa0
[ 293.894035] exit_to_user_mode_prepare+0x1b7/
---truncated--- |
