| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
thermal/netlink: Prevent userspace segmentation fault by adjusting UAPI header
The intel-lpmd tool [1], which uses the THERMAL_GENL_ATTR_CPU_CAPABILITY
attribute to receive HFI events from kernel space, encounters a
segmentation fault after commit 1773572863c4 ("thermal: netlink: Add the
commands and the events for the thresholds").
The issue arises because the THERMAL_GENL_ATTR_CPU_CAPABILITY raw value
was changed while intel_lpmd still uses the old value.
Although intel_lpmd can be updated to check the THERMAL_GENL_VERSION and
use the appropriate THERMAL_GENL_ATTR_CPU_CAPABILITY value, the commit
itself is questionable.
The commit introduced a new element in the middle of enum thermal_genl_attr,
which affects many existing attributes and introduces potential risks
and unnecessary maintenance burdens for userspace thermal netlink event
users.
Solve the issue by moving the newly introduced
THERMAL_GENL_ATTR_TZ_PREV_TEMP attribute to the end of the
enum thermal_genl_attr. This ensures that all existing thermal generic
netlink attributes remain unaffected.
[ rjw: Subject edits ] |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq/amd-pstate: Fix cpufreq_policy ref counting
amd_pstate_update_limits() takes a cpufreq_policy reference but doesn't
decrement the refcount in one of the exit paths, fix that. |
| In the Linux kernel, the following vulnerability has been resolved:
seccomp: passthrough uretprobe systemcall without filtering
When attaching uretprobes to processes running inside docker, the attached
process is segfaulted when encountering the retprobe.
The reason is that now that uretprobe is a system call the default seccomp
filters in docker block it as they only allow a specific set of known
syscalls. This is true for other userspace applications which use seccomp
to control their syscall surface.
Since uretprobe is a "kernel implementation detail" system call which is
not used by userspace application code directly, it is impractical and
there's very little point in forcing all userspace applications to
explicitly allow it in order to avoid crashing tracked processes.
Pass this systemcall through seccomp without depending on configuration.
Note: uretprobe is currently only x86_64 and isn't expected to ever be
supported in i386.
[kees: minimized changes for easier backporting, tweaked commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
erofs/zmap.c: Fix incorrect offset calculation
Effective offset to add to length was being incorrectly calculated,
which resulted in iomap->length being set to 0, triggering a WARN_ON
in iomap_iter_done().
Fix that, and describe it in comments.
This was reported as a crash by syzbot under an issue about a warning
encountered in iomap_iter_done(), but unrelated to erofs.
C reproducer: https://syzkaller.appspot.com/text?tag=ReproC&x=1037a6b2880000
Kernel config: https://syzkaller.appspot.com/text?tag=KernelConfig&x=e2021a61197ebe02
Dashboard link: https://syzkaller.appspot.com/bug?extid=a8e049cd3abd342936b6 |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: dts: imx8mm-verdin: Do not power down eth-phy
Currently if suspending using either freeze or memory state, the fec
driver tries to power down the phy which leads to crash of the kernel
and non-responsible kernel with the following call trace:
[ 24.839889 ] Call trace:
[ 24.839892 ] phy_error+0x18/0x60
[ 24.839898 ] kszphy_handle_interrupt+0x6c/0x80
[ 24.839903 ] phy_interrupt+0x20/0x2c
[ 24.839909 ] irq_thread_fn+0x30/0xa0
[ 24.839919 ] irq_thread+0x178/0x2c0
[ 24.839925 ] kthread+0x154/0x160
[ 24.839932 ] ret_from_fork+0x10/0x20
Since there is currently no functionality in the phy subsystem to power
down phys let's just disable the feature of powering-down the ethernet
phy. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv/kprobe: Fix instruction simulation of JALR
Set kprobe at 'jalr 1140(ra)' of vfs_write results in the following
crash:
[ 32.092235] Unable to handle kernel access to user memory without uaccess routines at virtual address 00aaaaaad77b1170
[ 32.093115] Oops [#1]
[ 32.093251] Modules linked in:
[ 32.093626] CPU: 0 PID: 135 Comm: ftracetest Not tainted 6.2.0-rc2-00013-gb0aa5e5df0cb-dirty #16
[ 32.093985] Hardware name: riscv-virtio,qemu (DT)
[ 32.094280] epc : ksys_read+0x88/0xd6
[ 32.094855] ra : ksys_read+0xc0/0xd6
[ 32.095016] epc : ffffffff801cda80 ra : ffffffff801cdab8 sp : ff20000000d7bdc0
[ 32.095227] gp : ffffffff80f14000 tp : ff60000080f9cb40 t0 : ffffffff80f13e80
[ 32.095500] t1 : ffffffff8000c29c t2 : ffffffff800dbc54 s0 : ff20000000d7be60
[ 32.095716] s1 : 0000000000000000 a0 : ffffffff805a64ae a1 : ffffffff80a83708
[ 32.095921] a2 : ffffffff80f160a0 a3 : 0000000000000000 a4 : f229b0afdb165300
[ 32.096171] a5 : f229b0afdb165300 a6 : ffffffff80eeebd0 a7 : 00000000000003ff
[ 32.096411] s2 : ff6000007ff76800 s3 : fffffffffffffff7 s4 : 00aaaaaad77b1170
[ 32.096638] s5 : ffffffff80f160a0 s6 : ff6000007ff76800 s7 : 0000000000000030
[ 32.096865] s8 : 00ffffffc3d97be0 s9 : 0000000000000007 s10: 00aaaaaad77c9410
[ 32.097092] s11: 0000000000000000 t3 : ffffffff80f13e48 t4 : ffffffff8000c29c
[ 32.097317] t5 : ffffffff8000c29c t6 : ffffffff800dbc54
[ 32.097505] status: 0000000200000120 badaddr: 00aaaaaad77b1170 cause: 000000000000000d
[ 32.098011] [<ffffffff801cdb72>] ksys_write+0x6c/0xd6
[ 32.098222] [<ffffffff801cdc06>] sys_write+0x2a/0x38
[ 32.098405] [<ffffffff80003c76>] ret_from_syscall+0x0/0x2
Since the rs1 and rd might be the same one, such as 'jalr 1140(ra)',
hence it requires obtaining the target address from rs1 followed by
updating rd.
[Palmer: Pick Guo's cleanup] |
| In the Linux kernel, the following vulnerability has been resolved:
net: fec: Use page_pool_put_full_page when freeing rx buffers
The page_pool_release_page was used when freeing rx buffers, and this
function just unmaps the page (if mapped) and does not recycle the page.
So after hundreds of down/up the eth0, the system will out of memory.
For more details, please refer to the following reproduce steps and
bug logs. To solve this issue and refer to the doc of page pool, the
page_pool_put_full_page should be used to replace page_pool_release_page.
Because this API will try to recycle the page if the page refcnt equal to
1. After testing 20000 times, the issue can not be reproduced anymore
(about testing 391 times the issue will occur on i.MX8MN-EVK before).
Reproduce steps:
Create the test script and run the script. The script content is as
follows:
LOOPS=20000
i=1
while [ $i -le $LOOPS ]
do
echo "TINFO:ENET $curface up and down test $i times"
org_macaddr=$(cat /sys/class/net/eth0/address)
ifconfig eth0 down
ifconfig eth0 hw ether $org_macaddr up
i=$(expr $i + 1)
done
sleep 5
if cat /sys/class/net/eth0/operstate | grep 'up';then
echo "TEST PASS"
else
echo "TEST FAIL"
fi
Bug detail logs:
TINFO:ENET up and down test 391 times
[ 850.471205] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL)
[ 853.535318] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 853.541694] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 870.590531] page_pool_release_retry() stalled pool shutdown 199 inflight 60 sec
[ 931.006557] page_pool_release_retry() stalled pool shutdown 199 inflight 120 sec
TINFO:ENET up and down test 392 times
[ 991.426544] page_pool_release_retry() stalled pool shutdown 192 inflight 181 sec
[ 1051.838531] page_pool_release_retry() stalled pool shutdown 170 inflight 241 sec
[ 1093.751217] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL)
[ 1096.446520] page_pool_release_retry() stalled pool shutdown 308 inflight 60 sec
[ 1096.831245] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 1096.839092] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1112.254526] page_pool_release_retry() stalled pool shutdown 103 inflight 302 sec
[ 1156.862533] page_pool_release_retry() stalled pool shutdown 308 inflight 120 sec
[ 1172.674516] page_pool_release_retry() stalled pool shutdown 103 inflight 362 sec
[ 1217.278532] page_pool_release_retry() stalled pool shutdown 308 inflight 181 sec
TINFO:ENET up and down test 393 times
[ 1233.086535] page_pool_release_retry() stalled pool shutdown 103 inflight 422 sec
[ 1277.698513] page_pool_release_retry() stalled pool shutdown 308 inflight 241 sec
[ 1293.502525] page_pool_release_retry() stalled pool shutdown 86 inflight 483 sec
[ 1338.110518] page_pool_release_retry() stalled pool shutdown 308 inflight 302 sec
[ 1353.918540] page_pool_release_retry() stalled pool shutdown 32 inflight 543 sec
[ 1361.179205] Qualcomm Atheros AR8031/AR8033 30be0000.ethernet-1:00: attached PHY driver (mii_bus:phy_addr=30be0000.ethernet-1:00, irq=POLL)
[ 1364.255298] fec 30be0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 1364.263189] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 1371.998532] page_pool_release_retry() stalled pool shutdown 310 inflight 60 sec
[ 1398.530542] page_pool_release_retry() stalled pool shutdown 308 inflight 362 sec
[ 1414.334539] page_pool_release_retry() stalled pool shutdown 16 inflight 604 sec
[ 1432.414520] page_pool_release_retry() stalled pool shutdown 310 inflight 120 sec
[ 1458.942523] page_pool_release_retry() stalled pool shutdown 308 inflight 422 sec
[ 1474.750521] page_pool_release_retry() stalled pool shutdown 16 inflight 664 sec
TINFO:ENET up and down test 394 times
[ 1492.8305
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: HWS, fix definer's HWS_SET32 macro for negative offset
When bit offset for HWS_SET32 macro is negative,
UBSAN complains about the shift-out-of-bounds:
UBSAN: shift-out-of-bounds in
drivers/net/ethernet/mellanox/mlx5/core/steering/hws/definer.c:177:2
shift exponent -8 is negative |
| HCL Connections contains a broken access control vulnerability that may allow unauthorized user to update data in certain scenarios. |
| An information disclosure vulnerability exists when Internet Explorer improperly handles objects in memory.An attacker who successfully exploited this vulnerability could test for the presence of files on disk, aka 'Internet Explorer Information Disclosure Vulnerability'. |
| An information disclosure vulnerability exists in the way that the Windows SMB Server handles certain requests, aka 'Windows SMB Information Disclosure Vulnerability'. This CVE ID is unique from CVE-2019-0704, CVE-2019-0821. |
| An elevation of privilege vulnerability exists in Windows when the Win32k component fails to properly handle objects in memory, aka 'Win32k Elevation of Privilege Vulnerability'. This CVE ID is unique from CVE-2019-0808. |
| An elevation of privilege vulnerability exists in Windows when the Win32k component fails to properly handle objects in memory, aka 'Win32k Elevation of Privilege Vulnerability'. This CVE ID is unique from CVE-2019-0685, CVE-2019-0859. |
| Under certain conditions SAP NetWeaver
Application Server for ABAP and ABAP Platform allows an attacker to access
remote-enabled function module with no further authorization which would
otherwise be restricted, the function can be used to read non-sensitive
information with low impact on confidentiality of the application. |
| An elevation of privilege vulnerability exists in Windows when the Win32k component fails to properly handle objects in memory, aka 'Win32k Elevation of Privilege Vulnerability'. This CVE ID is unique from CVE-2019-0797. |
| An elevation of privilege vulnerability exists in Windows when the Win32k component fails to properly handle objects in memory, aka 'Win32k Elevation of Privilege Vulnerability'. This CVE ID is unique from CVE-2019-0685, CVE-2019-0803. |
| An elevation of privilege vulnerability exists in the way Windows Error Reporting (WER) handles files, aka 'Windows Error Reporting Elevation of Privilege Vulnerability'. |
| A local elevation of privilege vulnerability exists in how splwow64.exe handles certain calls, aka 'Microsoft splwow64 Elevation of Privilege Vulnerability'. |
| A remote code execution vulnerability exists in the way that the Windows Graphics Device Interface (GDI) handles objects in the memory, aka 'GDI+ Remote Code Execution Vulnerability'. |
| An elevation of privilege vulnerability exists in Windows when the Win32k component fails to properly handle objects in memory, aka 'Win32k Elevation of Privilege Vulnerability'. |
