| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - bound the F54 report size to the allocated buffer
rmi_f54_work() reads a diagnostics report from the device into
f54->report_data, sizing the transfer with rmi_f54_get_report_size():
report_size = rmi_f54_get_report_size(f54);
...
for (i = 0; i < report_size; i += F54_REPORT_DATA_SIZE) {
int size = min(F54_REPORT_DATA_SIZE, report_size - i);
...
rmi_read_block(.., f54->report_data + i, size);
}
report_data is allocated once at probe from F54's own electrode counts
(array3_size(f54->num_tx_electrodes, f54->num_rx_electrodes, sizeof(u16))),
but rmi_f54_get_report_size() computes the size from
drv_data->num_*_electrodes when those are set, i.e. from the F55
function's electrode counts. Both counts come straight from device
queries (F54 and F55 each report up to 255 electrodes) and nothing
constrains the F55 counts to the F54 ones.
A malicious or malfunctioning RMI4 device that reports larger F55
electrode counts than its F54 counts makes report_size exceed the
allocation, so the read loop writes past report_data (and the V4L2
dequeue memcpy() then reads past it). On conforming hardware the F55
configured electrodes are a subset of the F54 physical electrodes, so
report_size never exceeds the buffer and well-behaved devices are
unaffected.
Record the allocation size and reject a report that does not fit,
mirroring the existing zero-size check. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - zero report size on F54 work error
In rmi_f54_work(), if an error occurs during report request or command
verification, the code jumped directly to the 'error' label, bypassing
the 'abort' label where f54->report_size was normally zeroed out.
This left f54->report_size containing its previous successful payload
size. If a user then altered the V4L2 format to a smaller size, and a
subsequent run failed, rmi_f54_buffer_queue() would copy the stale,
larger payload size into the shrunken V4L2 buffer, causing a heap
buffer overflow.
Fix this by merging the 'abort' and 'error' labels into a single 'out'
exit path, and ensuring that f54->report_size is always set to 0 on
failure by checking for error and zeroing the local report_size first. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hns: Fix memory leak of bonding resources
In a corner case of concurrent driver removal and driver reset,
bonding resource is first released in hns_roce_hw_v2_exit() during
driver removal, and then is allocated again in hns_roce_register_device()
during driver reset. This leads to memory leak because the release
timing has already passed. This may also lead to a kernel panic
as below because of the leaked notifier callback:
Call trace:
0xffffa20fccc04978 (P)
raw_notifier_call_chain+0x20/0x38
call_netdevice_notifiers_info+0x60/0xb8
netdev_lower_state_changed+0x4c/0xb8
As Sashiko suggested, the teardown order of bonding resources should
be inverted to make sure the resources are released when the driver
is removed. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/perf: fix preempt count underflow in fsl_emb_pmu_del
fsl_emb_pmu_del() unconditionally calls put_cpu_var(cpu_hw_events) at
the 'out:' label, but only calls the matching get_cpu_var() after the
'i < 0' early-return check. When event->hw.idx is negative the
function jumps to 'out:' without having taken get_cpu_var(), and the
trailing put_cpu_var() then issues an unmatched preempt_enable(),
underflowing preempt_count.
On a CONFIG_PREEMPT=y kernel preempt_count would underflow and
eventually present as a 'scheduling while atomic' BUG.
Move put_cpu_var() to pair with get_cpu_var() so the percpu access is
correctly bracketed and the 'out:' label only handles perf_pmu_enable. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Initialize hba->rpmbs list in ufshcd
Initialize the hba->rpmbs list in ufshcd_alloc_host() to prevent NULL
pointer dereference in the device teardown path if ufs_rpmb_probe()
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: spacemit: fix NULL check in spacemit_pin_set_config
spacemit_pin_set_config() looks up the per-pin descriptor with
spacemit_get_pin() then checks the wrong variable for failure:
const struct spacemit_pin *spin = spacemit_get_pin(pctrl, pin);
...
if (!pin)
return -EINVAL;
reg = spacemit_pin_to_reg(pctrl, spin->pin);
pin is an unsigned int pin id, where 0 (GPIO_0 / gmac0_rxdv on K3) is a
valid pin, so rejecting it here drops the PAD config write for the first
pin of every group. On K3 Pico-ITX the GMAC RGMII group lists pin 0 as
its first entry, so its drive-strength / bias configuration was silently
ignored.
The intended guard is against spacemit_get_pin() returning NULL when the
pin id isn't in the SoC's pin table. Check spin instead, which both
restores PAD setup for pin 0 and prevents a NULL deref on spin->pin. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: Fix NULL pointer dereference in mt7996_init_tx_queues()
When MT76_NPU and CONFIG_NET_MEDIATEK_SOC_WED are enabled and
mt76 detects properly the Airoha NPU SoC, mt7996_init_tx_queues() will
dereference a NULL WED pointer.
Fix the issue by always passing the WED pointer from mt7996_dma_init(). |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - add response length checks
The driver processes response data from device buffers without verifying
that the device actually sent enough data. This can lead to
out-of-bounds reads or processing stale data.
Add checks for the expected response length before accessing the
buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp/sev-dev-tsm - bail out early when pdev->bus is NULL
dsm_create() initially checks pdev->bus when computing segment_id:
u8 segment_id = pdev->bus ? pci_domain_nr(pdev->bus) : 0;
But the next two lines unconditionally dereference pdev->bus via
pcie_find_root_port() and especially pci_dev_id(pdev), which expands
to PCI_DEVID(dev->bus->number, dev->devfn). If pdev->bus is in fact
NULL, segment_id is initialised to 0 but the very next statement
crashes the kernel.
smatch flags this:
drivers/crypto/ccp/sev-dev-tsm.c:253 dsm_create() error: we
previously assumed 'pdev->bus' could be null (see line 251)
Make the NULL handling consistent: if pdev->bus is NULL the device
has no PCI context to work with and SEV TIO setup cannot proceed,
so return -ENODEV before any of the bus-dependent lookups. The
remaining initialisation now runs only on the path where pdev->bus
is known to be valid.
No change for callers where pdev->bus is non-NULL, which is the
only case where dsm_create() did meaningful work before this change. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Guard management mailbox channel cleanup against NULL pointer
The management mailbox channel cleanup helpers can be called from
error handling paths when mgmt_chann has already been destroyed.
Add NULL checks to xdna_mailbox_free_channel() and
xdna_mailbox_stop_channel() so the cleanup path safely returns instead
of dereferencing a NULL mailbox channel pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: maps: vmu-flash: fix NULL pointer dereference in initialization
The mtd_info contains a struct device, which must be linked to its
parent. Without this, the initialization of the MTD fails with a NULL
pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: atmel-mci: Fix use-after-free in atmci_remove due to race condition
In atmci_probe, &host->bh_work is bound with atmci_work_func, and
atmci_interrupt, atmci_timeout_timer and atmci_dma_complete can all
queue this work on system_bh_wq.
If we remove the module, atmci_remove makes cleanup and the memory
allocated for host with devm_kzalloc() is released after the remove
callback returns, while the work mentioned above may still be pending
or running. The sequence of operations that may lead to a UAF bug is
as follows:
CPU0 CPU1
| atmci_interrupt
| queue_work(system_bh_wq,
| &host->bh_work)
atmci_remove |
atmci_cleanup_slot(...) |
atmci_writel(host, ATMCI_IDR, ~0UL) |
timer_delete_sync(&host->timer) |
dma_release_channel(host->dma.chan) |
free_irq(platform_get_irq(pdev, 0), host) |
| atmci_work_func
| // use host
// devm resources released after |
// remove returns, host is freed |
| // use host (use-after-free)
Fix it by canceling the work after all the sources that can schedule
it (IRQ handler, timeout timer and DMA completion callback) have been
stopped, and before proceeding with the remaining cleanup in
atmci_remove. |
| In the Linux kernel, the following vulnerability has been resolved:
openrisc: signal: do not restore privileged SR bits on sigreturn
restore_sigcontext() copies the whole supervision register (SR) from the
signal frame and only clears SPR_SR_SM before the value is reloaded into
the hardware SR (through ESR and l.rfe) on the return to user space. All
other SR bits are left under user control.
An unprivileged task can thus return from a signal handler through a
crafted sigframe that clears SPR_SR_DME. With the data MMU disabled the
CPU performs no translation or protection on data accesses, so the task
gains read and write access to arbitrary physical memory, a local
privilege escalation. SPR_SR_IME, SPR_SR_SUMRA, SPR_SR_LEE, SPR_SR_EPH
and the cache-enable bits are exposed the same way. The ptrace GPR regset
already refuses any change to SR for exactly this reason.
Restore only the arithmetic flag bits (F, CY, OV) from the signal frame
and take every privileged control bit from the SR the kernel saved on
signal entry.
Verified with qemu-system-or1k -M or1k-sim: before this change an
unprivileged PoC clears SPR_SR_DME in rt_sigreturn and writes a marker to
physical address 0x03000000 (beyond the kernel's mem=32M); afterwards the
same PoC receives SIGSEGV and physical memory is unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: lib: Fix ZBB strnlen reading past count boundary
The ZBB-optimized strnlen loop loads one word ahead before checking the
aligned boundary:
REG_L t1, SZREG(t0) // load next word
addi t0, t0, SZREG // advance
orc.b t1, t1
bgeu t0, t4, 4f // boundary check AFTER load
where t4 = (s + count) & -SZREG. When s is aligned and count is a
multiple of SZREG, t4 equals s + count and the loop loads a full word
starting at exactly s + count. If s + count falls on a page boundary
with the next page unmapped, this faults.
Fix by computing the aligned boundary from the last valid byte
(s + count - 1) instead of s + count. This makes the loop stop at the
word containing the last valid byte rather than potentially loading the
word after it. The count == 0 case is already handled by the beqz
early exit.
Also add a pre-loop guard (bgeu t0, t4) for the case where all valid
bytes fit within the first word. With the adjusted boundary, t4 can
equal t0, and entering the loop with stale register state from the
first-word processing would produce incorrect results.
The final minu clamp ensures the result is still correct when the last
loaded word extends past s + count - 1 within the same aligned word. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: lpass-tx-macro: Fix enum kcontrol accesses
The "DEC0 MODE" to "DEC7 MODE" controls are enumerated, but
tx_macro_dec_mode_get() and tx_macro_dec_mode_put() access their
value through ucontrol->value.integer.value[0] (a long) instead of
ucontrol->value.enumerated.item[0] (an unsigned int).
This same pattern was fixed in the sibling drivers by
commit bcfe5f76cc40 ("ASoC: codecs: rx-macro: fix accessing array
out of bounds for enum type") and
commit 0ea5eff7c606 ("ASoC: codecs: va-macro: fix accessing array
out of bounds for enum type"), but tx-macro was missed.
On 64-bit kernels built with CONFIG_SND_CTL_DEBUG, the elem value
sanity check catches the 4 bytes written past the enumerated item
and every read of these controls fails with -EINVAL:
snd-sm8250 sound: control 2:0:0:DEC0 MODE:0: access overflow |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: ml-ioh: use raw_spinlock_t for the register lock
ioh_irq_type() is registered as the irq_chip .irq_set_type callback and
takes chip->spinlock with spin_lock_irqsave(). This callback is reached
from __setup_irq() -> __irq_set_trigger() -> chip->irq_set_type() while
the caller holds desc->lock, a raw_spinlock_t, with hardirqs disabled.
That context is not sleepable, but on PREEMPT_RT a regular spinlock_t is
an rtmutex-backed sleeping lock, so acquiring it there is invalid.
ioh_irq_enable() and ioh_irq_disable() take the same lock from the
.irq_enable/.irq_disable callbacks, which are likewise invoked with
desc->lock held.
Convert the register lock to raw_spinlock_t. The same lock also
serializes the GPIO direction/value callbacks and the suspend/resume
register save/restore, and those critical sections only perform short
sequences of MMIO register accesses (ioread32()/iowrite32()); the
.irq_set_type callback additionally emits a dev_warn() on an unsupported
type. None of these are sleepable operations, so keeping this register
lock non-sleeping is appropriate for the irqchip callbacks and does not
change the GPIO-side locking contract.
This is the same fix as commit a02b8950d619 ("gpio: pch: use
raw_spinlock_t for the register lock"); this driver shares the same
structure as gpio-pch. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - fix race condition in reset_device sysfs callback
The ims_pcu_reset_device() sysfs callback calls ims_pcu_execute_command()
without acquiring pcu->cmd_mutex. This can lead to data races and
corruption of the shared command buffer if triggered concurrently with
other commands.
Acquire pcu->cmd_mutex before calling ims_pcu_execute_command(). |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio_ccw: Free all memory if cp_init() fails
The routine cp_free() is called to unpin/free any memory once an I/O
is completed successfully, or if cp_prefetch() fails. But if cp_init()
fails, and cp->initialized is not enabled, the same routine cannot be
used to free all the memory.
An attempt to address this exists in ccwchain_handle_ccw(), where a
single call to ccwchain_free() is made for the currently-processed
CCW segment. But this will leak other segments (created as a result
of a Transfer in Channel) that had been allocated as part of the same
channel program.
Address this by performing the cleanup outside of the recursive
ccwchain_handle_ccw()/ccwchain_loop_tic() logic. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: qcom-geni: fix TX DMA buffer flush
When transmit flushing a qcom-geni UART during an ongoing TX DMA, the
UART gets stuck infinitely repeating corrupted TX DMA frames.
The DMA-mode uart_ops does not provide a flush_buffer callback, so an
in-flight transfer can complete after serial core has reset the transmit
kfifo, underflowing its length and resubmitting page-sized transfers
indefinitely. Add one that stops the transfer and clears tx_remaining
and tx_queued.
The stop path was also broken: it unmapped the buffer while the serial
engine could still read it, and never reset the TX DMA state machine.
Cancel the main sequencer command first, then reset the state machine
and wait for it before unmapping. Drop the early return so a pending
mapping is also cleaned up when the main command is inactive.
The bug can be triggered from userspace with a large write immediately
followed by TCOFLUSH. A following tcdrain will hang forever. The bug was
reproduced and this fix was validated on Arduino Uno Q (QRB2210)
using /dev/ttyHS1. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: Remove buffer from list prior to unmap operation
fastrpc_req_munmap_impl() is called to unmap any buffer. The buffer is
getting removed from the list after it is unmapped from DSP. This can
create potential race conditions if multiple threads invoke unmap
concurrently, where one thread may remove the entry from the list while
another thread's unmap operation is still ongoing.
Fix this by removing the buffer entry from the list before calling the
unmap operation. If the unmap fails, the entry is re-added to the list
so that userspace can retry the unmap, or alternatively, the buffer
will be cleaned up during device release when the DSP process is torn
down and all DSP-side mappings are freed along with remaining buffers
in the list. |
