| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/atm: fix slab-out-of-bounds read in vcc_setsockopt()
vcc_setsockopt() contained an ineffective optlen check:
if (__SO_LEVEL_MATCH(optname, level) && optlen != __SO_SIZE(optname))
return -EINVAL;
If __SO_LEVEL_MATCH(optname, level) evaluated to false (e.g. if the caller
passed a mismatched level), the length check optlen != __SO_SIZE(optname)
was short-circuited and bypassed. Execution then fell through to switch(optname),
calling copy_from_sockptr() assuming optval contained sufficient space.
Furthermore, even if level matched, a cgroup BPF setsockopt filter could shrink
optlen after entry. Because copy_from_sockptr() on kernel pointers uses memcpy(),
this leads to a KASAN slab-out-of-bounds read when optlen is smaller than the
expected structure size.
Fix this by using copy_safe_from_sockptr(), which unconditionally validates
that optlen is at least the expected size before copying. Also change the local
'value' variable type from 'unsigned long' to 'int' so that SO_SETCLP matches
its sizeof(int) ABI encoding on 64-bit systems. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: fix Route Information option length validation
rt6_route_rcv() validates the Route Information option (RFC 4191) length
against the prefix length, but both checks are off by one.
rinfo->length is the ND option length in units of 8 octets and it
*includes* the 8-byte option header, so an option carrying N bytes of
prefix has length == 1 + N/8. RFC 4191 section 2.3 requires length 3
when Prefix Length is greater than 64, and 2 or 3 when it is greater
than 0. The code accepts length >= 2 and length >= 1 respectively.
ipv6_addr_prefix() then copies prefix_len/8 bytes out of rinfo->prefix,
so a Router Advertisement with (prefix_len=128, length=2) or
(prefix_len=64, length=1) makes the kernel read up to 8 bytes past the
end of the option. Those bytes end up in the prefix of the route that
gets installed, so they are visible to userspace:
# RA with a Route Information option (prefix_len=128, length=2)
# followed by a source link-layer address option, 01 01 de ad be ef ca fe
$ ip -6 route show
2001:db8:dead:beef:101:dead:beef:cafe via fe80::1234 dev veth0 proto ra
^^^^^^^^^^^^^^^^^^ the next option, read out of bounds
When the Route Information option is the last one in the packet, those
eight bytes come from the skb tail room instead.
Reject the option lengths RFC 4191 does not allow. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_hashlimit: validate hashtable supports XT_HASHLIMIT_RATE_MATCH
The XT_HASHLIMIT_RATE_MATCH flag mode changes the semantics of the
dsthash_ent structure which represents an entry in the hashtable. There
is a union area which uses a different layout to express the rate match
mode.
Update .checkentry path to validate the XT_HASHLIMIT_RATE_MATCH mode
flag is requested by two or more different rules that refer to the same
hashtable. Otherwise, uninitialized access to the burst field in the
union is possible.
Reject the use of the XT_HASHLIMIT_RATE_MATCH mode flag if set on by
revision less than 3 too. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: fix wrong pci_get_drvdata type in AER handlers
rtw89 stores an ieee80211_hw pointer via pci_set_drvdata() at probe
time, but io_error_detected() and io_resume() retrieve it as a
net_device pointer. This causes netif_device_detach/attach to
operate on an ieee80211_hw struct, reading and writing at wrong
offsets. The adjacent io_slot_reset() already does it correctly.
Use ieee80211_stop_queues/wake_queues instead, consistent with
every other queue stop/start path in the driver.
Tested on RTL8852CE by calling the handlers from a test module
before and after the fix. |
| Open Zaak is an open-source data and services layer for Dutch case-oriented working. From 1.13.0 until 1.27.2, 1.28.2, and 1.29.0, _import_document_row in src/openzaak/components/documenten/tasks.py uses the attacker-controlled bestandspad CSV field without ensuring that the resolved path remains under IMPORT_DOCUMENTEN_BASE_DIR. A client with an all-authorizations application token can supply an absolute or parent-traversal path to a file readable by the Celery service account. The worker copies that file into document storage, allowing its contents to be retrieved through the normal document download API and exposing server secrets or other private files. This issue is fixed in versions 1.27.2, 1.28.2, and 1.29.0. |
| The Visual Form Builder WordPress plugin through 3.1 does not perform an authorization check before displaying recent form submission data in a dashboard widget, allowing any authenticated user (Subscriber and above) to read other users' submitted contact information, including names, email addresses, form titles and timestamps. |
| The Product Delivery Date for WooCommerce WordPress plugin before 3.3.2 does not perform a capability check before disclosing order details through its calendar view AJAX actions, allowing users with a role as low as Contributor to view other customers' order information. |
| Heap-based buffer overflow in Microsoft Office Excel allows an unauthorized attacker to execute code over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_u32: reject invalid shift counts
u32_match_it() executes rule-supplied shift operands on a 32-bit
value. A malformed u32 rule can provide a shift count of 32 or more,
triggering an undefined shift out-of-bounds during packet evaluation.
Validate XT_U32_LEFTSH and XT_U32_RIGHTSH operands in
u32_mt_checkentry() and reject malformed rules before they reach the
packet path. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc3-control: Fix heap overflow in bytes_ext put/get
The ipc_control_data buffer is allocated as kzalloc(max_size), where
max_size covers the entire struct sof_ipc_ctrl_data including its
flexible array payload. However, the bounds checks in bytes_ext_put
and _bytes_ext_get compared user data lengths against max_size
directly, ignoring that cdata->data sits at an offset of
sizeof(struct sof_ipc_ctrl_data) bytes into the allocation.
This allowed writing up to sizeof(struct sof_ipc_ctrl_data) bytes past
the end of the heap buffer from unprivileged userspace via the ALSA TLV
kcontrol interface, and similarly allowed over-reading adjacent heap
data on the get path.
Fix all bounds checks to subtract sizeof(*cdata) from max_size so they
reflect the actual space available at the cdata->data offset. Also fix
the error-path restore in bytes_ext_put which wrote to cdata->data
instead of cdata, causing the same overflow. |
| FreeRDP from 3.30.0 before 3.32.0 contains a resource exhaustion vulnerability in the rdpecam client that lets malicious RDP servers request unadvertised camera media types. Attackers can send a StartStreamsRequest with oversized dimensions to force large pending-sample allocations and reconfigure the local camera through the HAL. |
| Improper verification of cryptographic signature in Windows Update Stack allows an authorized attacker to perform spoofing locally. |
| Discourse Doc Categories is a plugin for organizing Discourse topics as documentation. Prior to the verified source fix, the doc category index refresh resolves linked titles for private messages or restricted category topics without enforcing the viewer's authorization. A user who can edit the index topic can use this behavior to learn titles that the user is not authorized to view, although the advisory does not establish access to topic contents. This vulnerability is addressed by commit b15d4de02ad29d7c9525346afee51fef4a2c605a. |
| FreePBX is an open source IP PBX. Prior to versions 16.0.40 and 17.0.7, a critical remote code execution (RCE) vulnerability exists in the superfecta module due to unsafe inclusion of arbitrary PHP files, allowing authenticated attackers to execute arbitrary PHP code on the server with the privileges of the web server user. Authentication with a known username is required. The vulnerability is rooted in the options and save_options cases in the Superfecta module's AJAX handler. The code dynamically includes PHP files from the sources/ directory based on user-supplied input. This allows an attacker to execute arbitrary code when combined with arbitrary directory creation (e.g., via the backup module) and file uploads that reveal full paths (e.g., via the soundlang module). This issue has been patched in versions 16.0.40 and 17.0.7. |
| In Apache CXF, the parser for multipart/MTOM attachment part headers did not fully enforce the configured attachment-max-header-size (default 300 characters) and attachment-headers-max-count (default 500) limits. The size limit was applied only to each physical line, not to a header value built from continuation lines or to the combined values of a repeated header. The count limit was checked against the number of distinct header names, not the total number of header lines. A remote, unauthenticated attacker could send a multipart request with very large folded or repeated part headers. The server would then allocate memory without bound, causing a denial of service.
Users are recommended to upgrade to versions 4.2.4 or 4.1.9 or 3.6.13, which fix this issue. |
| A flaw was found in Netty's HTTP/2 codec. When converting HTTP/1 CONNECT requests to HTTP/2, the component incorrectly uses the Host header instead of the CONNECT authority-form request-target for the tunnel authority. A remote attacker can exploit this by supplying a different Host header, leading to a malformed HTTP/2 CONNECT request. This can bypass security controls such as tunnel allow-lists or egress policies, resulting in integrity loss. |
| A flaw was found in Netty. A remote attacker could exploit this vulnerability by sending specially crafted HTTP/2 or HTTP/3 Extended CONNECT requests. Netty's HTTP-object conversion path incorrectly processes these requests as regular HTTP/1.1 CONNECT requests, leading to a loss of critical protocol and path information. This misinterpretation can allow attackers to bypass security policies, such as routing or authorization logic, in applications that rely on Netty for HTTP/2 or HTTP/3 communication, resulting in integrity loss. |
| Improper access control in Samsung Internet prior to version 30.0.5.6 allows local attackers to access sensitive information. |
| Path traversal in Samsung Flow prior to version 4.9.22.1 allows local attackers to access clipboard data. |
| Generation of Error Message Containing Sensitive Information vulnerability in ash-project ash_typescript allows an unauthenticated attacker to read internal Elixir terms from an RPC error response by provoking an error the error builder has no dedicated clause for.
AshTypescript.Rpc.ErrorBuilder.build_error_response/1 in lib/ash_typescript/rpc/error_builder.ex renders a pipeline error term that matches no specific clause with inspect/1 and places the result in details.error of the client-facing error. Ash exceptions take a separate path in AshTypescript.Rpc.Errors where unhandled cases are redacted behind an errorId, but these fallbacks have no redaction, so whatever the term carries reaches the HTTP or channel response. Two request paths hand it such terms: a struct-typed action argument with an invalid nested value, where cast_map_to_struct/2 in lib/ash_typescript/rpc/input_formatter.ex throws the raw Ash.Type cast error into the builder, and field selection on a generic action that returns a primitive, where format_field_type/1 inspects the full Ash.Info.Manifest.Type struct into vars.returnType. Resource module names in vars.resource are not treated as sensitive and are out of scope.
This issue affects ash_typescript: from 0.1.0 before 0.19.1. |
