| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability exists in BIG-IP Edge Client and browser VPN clients on Windows that may allow attackers to gain access to sensitive information. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: smbd: fix dma_unmap_sg() nents
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned. |
| In the Linux kernel, the following vulnerability has been resolved:
uacce: fix isolate sysfs check condition
uacce supports the device isolation feature. If the driver
implements the isolate_err_threshold_read and
isolate_err_threshold_write callback functions, uacce will create
sysfs files now. Users can read and configure the isolation policy
through sysfs. Currently, sysfs files are created as long as either
isolate_err_threshold_read or isolate_err_threshold_write callback
functions are present.
However, accessing a non-existent callback function may cause the
system to crash. Therefore, intercept the creation of sysfs if
neither read nor write exists; create sysfs if either is supported,
but intercept unsupported operations at the call site. |
| A flaw has been found in WeKan up to 8.20. Affected is the function applyWipLimit of the file models/lists.js of the component Attachment Storage Handler. Executing a manipulation can lead to improper access controls. The attack can be executed remotely. Upgrading to version 8.21 is able to address this issue. This patch is called 8c0b4f79d8582932528ec2fdf2a4487c86770fb9. It is recommended to upgrade the affected component. |
| Permission control vulnerability in the AMS module.
Impact: Successful exploitation of this vulnerability may affect availability. |
| A security vulnerability has been detected in D-Link DIR-605L and DIR-619L 2.06B01/2.13B01. The impacted element is an unknown function of the file /wan_connection_status.asp of the component DHCP Connection Status Handler. The manipulation leads to information disclosure. Remote exploitation of the attack is possible. The exploit has been disclosed publicly and may be used. This vulnerability only affects products that are no longer supported by the maintainer. |
| Adminer is open-source database management software. Adminer v5.4.1 and earlier has a version check mechanism where adminer.org sends signed version info via JavaScript postMessage, which the browser then POSTs to ?script=version. This endpoint lacks origin validation and accepts POST data from any source. An attacker can POST version[] parameter which PHP converts to an array. On next page load, openssl_verify() receives this array instead of string and throws TypeError, returning HTTP 500 to all users. Upgrade to Adminer 5.4.2. |
| SAP Commerce Cloud exposes multiple API endpoints to unauthenticated users, allowing them to submit requests to these open endpoints to retrieve sensitive information that is not intended to be publicly accessible via the front-end. This vulnerability has a low impact on confidentiality and does not affect integrity and availability. |
| Pion DTLS is a Go implementation of Datagram Transport Layer Security. Pion DTLS versions v1.0.0 through v3.0.10 and 3.1.0 use random nonce generation with AES GCM ciphers, which makes it easier for remote attackers to obtain the authentication key and spoof data by leveraging the reuse of a nonce in a session and a "forbidden attack". Upgrade to v3.0.11, v3.1.1, or later. |
| ### Summary
The `arrayLimit` option in qs does not enforce limits for comma-separated values when `comma: true` is enabled, allowing attackers to cause denial-of-service via memory exhaustion. This is a bypass of the array limit enforcement, similar to the bracket notation bypass addressed in GHSA-6rw7-vpxm-498p (CVE-2025-15284).
### Details
When the `comma` option is set to `true` (not the default, but configurable in applications), qs allows parsing comma-separated strings as arrays (e.g., `?param=a,b,c` becomes `['a', 'b', 'c']`). However, the limit check for `arrayLimit` (default: 20) and the optional throwOnLimitExceeded occur after the comma-handling logic in `parseArrayValue`, enabling a bypass. This permits creation of arbitrarily large arrays from a single parameter, leading to excessive memory allocation.
**Vulnerable code** (lib/parse.js: lines ~40-50):
```js
if (val && typeof val === 'string' && options.comma && val.indexOf(',') > -1) {
return val.split(',');
}
if (options.throwOnLimitExceeded && currentArrayLength >= options.arrayLimit) {
throw new RangeError('Array limit exceeded. Only ' + options.arrayLimit + ' element' + (options.arrayLimit === 1 ? '' : 's') + ' allowed in an array.');
}
return val;
```
The `split(',')` returns the array immediately, skipping the subsequent limit check. Downstream merging via `utils.combine` does not prevent allocation, even if it marks overflows for sparse arrays.This discrepancy allows attackers to send a single parameter with millions of commas (e.g., `?param=,,,,,,,,...`), allocating massive arrays in memory without triggering limits. It bypasses the intent of `arrayLimit`, which is enforced correctly for indexed (`a[0]=`) and bracket (`a[]=`) notations (the latter fixed in v6.14.1 per GHSA-6rw7-vpxm-498p).
### PoC
**Test 1 - Basic bypass:**
```
npm install qs
```
```js
const qs = require('qs');
const payload = 'a=' + ','.repeat(25); // 26 elements after split (bypasses arrayLimit: 5)
const options = { comma: true, arrayLimit: 5, throwOnLimitExceeded: true };
try {
const result = qs.parse(payload, options);
console.log(result.a.length); // Outputs: 26 (bypass successful)
} catch (e) {
console.log('Limit enforced:', e.message); // Not thrown
}
```
**Configuration:**
- `comma: true`
- `arrayLimit: 5`
- `throwOnLimitExceeded: true`
Expected: Throws "Array limit exceeded" error.
Actual: Parses successfully, creating an array of length 26.
### Impact
Denial of Service (DoS) via memory exhaustion. |
| In the Linux kernel, the following vulnerability has been resolved:
igc: Reduce TSN TX packet buffer from 7KB to 5KB per queue
The previous 7 KB per queue caused TX unit hangs under heavy
timestamping load. Reducing to 5 KB avoids these hangs and matches
the TSN recommendation in I225/I226 SW User Manual Section 7.5.4.
The 8 KB "freed" by this change is currently unused. This reduction
is not expected to impact throughput, as the i226 is PCIe-limited
for small TSN packets rather than TX-buffer-limited. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: hp-bioscfg: Fix kobject warnings for empty attribute names
The hp-bioscfg driver attempts to register kobjects with empty names when
the HP BIOS returns attributes with empty name strings. This causes
multiple kernel warnings:
kobject: (00000000135fb5e6): attempted to be registered with empty name!
WARNING: CPU: 14 PID: 3336 at lib/kobject.c:219 kobject_add_internal+0x2eb/0x310
Add validation in hp_init_bios_buffer_attribute() to check if the
attribute name is empty after parsing it from the WMI buffer. If empty,
log a debug message and skip registration of that attribute, allowing the
module to continue processing other valid attributes. |
| In the Linux kernel, the following vulnerability has been resolved:
slab: fix kmalloc_nolock() context check for PREEMPT_RT
On PREEMPT_RT kernels, local_lock becomes a sleeping lock. The current
check in kmalloc_nolock() only verifies we're not in NMI or hard IRQ
context, but misses the case where preemption is disabled.
When a BPF program runs from a tracepoint with preemption disabled
(preempt_count > 0), kmalloc_nolock() proceeds to call
local_lock_irqsave() which attempts to acquire a sleeping lock,
triggering:
BUG: sleeping function called from invalid context
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 6128
preempt_count: 2, expected: 0
Fix this by checking !preemptible() on PREEMPT_RT, which directly
expresses the constraint that we cannot take a sleeping lock when
preemption is disabled. This encompasses the previous checks for NMI
and hard IRQ contexts while also catching cases where preemption is
disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs-scheme: cleanup access_pattern subdirs on scheme dir setup failure
When a DAMOS-scheme DAMON sysfs directory setup fails after setup of
access_pattern/ directory, subdirectories of access_pattern/ directory are
not cleaned up. As a result, DAMON sysfs interface is nearly broken until
the system reboots, and the memory for the unremoved directory is leaked.
Cleanup the directories under such failures. |
| In the Linux kernel, the following vulnerability has been resolved:
efivarfs: fix error propagation in efivar_entry_get()
efivar_entry_get() always returns success even if the underlying
__efivar_entry_get() fails, masking errors.
This may result in uninitialized heap memory being copied to userspace
in the efivarfs_file_read() path.
Fix it by returning the error from __efivar_entry_get(). |
| In the Linux kernel, the following vulnerability has been resolved:
x86/vmware: Fix hypercall clobbers
Fedora QA reported the following panic:
BUG: unable to handle page fault for address: 0000000040003e54
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20251119-3.fc43 11/19/2025
RIP: 0010:vmware_hypercall4.constprop.0+0x52/0x90
..
Call Trace:
vmmouse_report_events+0x13e/0x1b0
psmouse_handle_byte+0x15/0x60
ps2_interrupt+0x8a/0xd0
...
because the QEMU VMware mouse emulation is buggy, and clears the top 32
bits of %rdi that the kernel kept a pointer in.
The QEMU vmmouse driver saves and restores the register state in a
"uint32_t data[6];" and as a result restores the state with the high
bits all cleared.
RDI originally contained the value of a valid kernel stack address
(0xff5eeb3240003e54). After the vmware hypercall it now contains
0x40003e54, and we get a page fault as a result when it is dereferenced.
The proper fix would be in QEMU, but this works around the issue in the
kernel to keep old setups working, when old kernels had not happened to
keep any state in %rdi over the hypercall.
In theory this same issue exists for all the hypercalls in the vmmouse
driver; in practice it has only been seen with vmware_hypercall3() and
vmware_hypercall4(). For now, just mark RDI/RSI as clobbered for those
two calls. This should have a minimal effect on code generation overall
as it should be rare for the compiler to want to make RDI/RSI live
across hypercalls. |
| A security flaw has been discovered in FastApiAdmin up to 2.2.0. Affected by this vulnerability is the function reset_api_docs of the file /backend/app/plugin/init_app.py of the component Custom Documentation Endpoint. The manipulation results in information disclosure. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks. |
| Improper neutralization of special elements in user-supplied input within the ZIA Admin UI could allow an authenticated administrator to access or retrieve unauthorized internal information in rare conditions. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. The shipped "secure" security policy includes a rule intended to prevent reading/writing from standard streams. However, ImageMagick also supports fd:<n> pseudo-filenames (e.g., fd:0, fd:1). Prior to versions 7.1.2-15 and 6.9.13-40, this path form is not blocked by the secure policy templates, and therefore bypasses the protection goal of "no stdin/stdout." Versions 7.1.2-15 and 6.9.13-40 contain a patch by including a change to the more secure policies by default. As a workaround, add the change to one's security policy manually. |
| NVIDIA Delegated Licensing Service for all appliance platforms contains a vulnerability where an attacker could exploit an improper authentication issue. A successful exploit of this vulnerability might lead to information disclosure. |
