Export limit exceeded: 414025 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (1580 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-105824 | 1 Imagemagick | 1 Imagemagick | 2026-10-09 | 5.9 Medium |
| This CVE ID has been rejected as a duplicate. | ||||
| CVE-2026-98197 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (w83791d) remove fan/pwm 4-5 sysfs group on remove When the fan/pwm 4-5 pins are not used as GPIO, w83791d_probe() creates the w83791d_group_fanpwm45 sysfs group on the I2C client device. The probe error path removes this group when a later initialization step fails, but the normal remove path only removes w83791d_group. As a result, the optional fan/pwm 4-5 sysfs files can remain after the driver is unbound. The callbacks associated with these files access the driver data, which is devm allocated and released after driver unbind. Leaving the sysfs files behind can therefore result in accesses to stale driver data. Remove w83791d_group_fanpwm45 during normal teardown as well. This issue was found by manual code inspection. | ||||
| CVE-2026-98366 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: validate access flags before swapping the MR's PD rxe_rereg_user_mr() reassigns mr->ibmr.pd first and only then validates the IB_MR_REREG_ACCESS argument: if (flags & IB_MR_REREG_PD) { rxe_put(old_pd); rxe_get(pd); mr->ibmr.pd = ibpd; } if (flags & IB_MR_REREG_ACCESS) { if (access & ~RXE_ACCESS_SUPPORTED_MR) return ERR_PTR(-EOPNOTSUPP); mr->access = access; } Both flags pass the entry check because RXE_MR_REREG_SUPPORTED is IB_MR_REREG_PD | IB_MR_REREG_ACCESS, so a caller can reach the access check with mr->ibmr.pd already reassigned. mr->ibmr.pd is owned by the core, which adjusts pd->usecnt only on the success path: ib_uverbs_rereg_mr() jumps to put_new_uobj on a driver error without undoing the reassignment, so mr->pd == new_pd while the usecnts still charge the MR to orig_pd. ib_dereg_mr_user() then decrements new_pd, whose count can reach zero while a memory window still references it; uverbs_free_pd() frees the PD on that count alone and rxe_mw_cleanup() writes to freed memory: BUG: KASAN: slab-use-after-free in __rxe_put+0x31/0xa0 Write of size 4 at addr ffff8881301dd690 by task rxe_poc/591 __rxe_put+0x31/0xa0 rxe_mw_cleanup+0x42/0x200 __rxe_cleanup+0x115/0x370 rxe_dealloc_mw+0x4c/0x80 Allocated by task 591: ib_uverbs_alloc_pd+0x258/0x540 Freed by task 591: ib_dealloc_pd_user+0x174/0x210 uverbs_free_pd+0x8d/0xc0 ib_uverbs_dealloc_pd+0x18e/0x1d0 Validate the access flags before mutating any state so the callback either applies every requested change or none. | ||||
| CVE-2026-98175 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: cancel reconnect work in clean_demultiplex_info() clean_demultiplex_info() cancels server->echo delayed work but not server->reconnect, which can cause a use-after-free when the demultiplex thread exits while a reconnect work is still queued: cifs_demultiplex_thread() cifs_readv_from_socket() cifs_reconnect() __cifs_reconnect() cifs_queue_server_reconn() mod_delayed_work(cifsiod_wq, &server->reconnect, 0) clean_demultiplex_info() cancel_delayed_work_sync(&server->echo) // echo canceled // reconnect NOT canceled kfree_sensitive(server) // server freed ...later, on cifsiod_wq: smb2_reconnect_server() server->srv_count // UAF read of freed server Fix this by canceling server->reconnect delayed work in clean_demultiplex_info() before the server is freed, the same way cifs_put_tcp_session() already does. | ||||
| CVE-2026-98364 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: hold net_device reference under RCU in bundle creation xfrm_bundle_create() and xfrm_create_dummy_bundle() read dst->dev into a local pointer without taking a device reference, then pass it to xfrm_fill_dst(). A concurrent RTM_DELLINK replaces dst->dev via dst_dev_put() and frees the old net_device, causing a use-after-free when xfrm6_fill_dst() later dereferences the stale dev pointer. BUG: KASAN: slab-use-after-free in xfrm6_fill_dst+0x82c/0x860 (net/ipv6/xfrm6_policy.c:86 netdev_hold()) Read of size 8 at addr ffff8880142fe588 by task exploit/153 Call Trace: xfrm6_fill_dst+0x82c/0x860 xfrm_resolve_and_create_bundle+0x21d4/0x2bd0 xfrm_lookup_with_ifid+0x485/0x1640 ip6_dst_lookup_flow+0x19b/0x1e0 udpv6_sendmsg+0x1443/0x2dd0 Fix this by reading dst->dev via dst_dev_rcu() and keeping the RCU read-side critical section active until xfrm_fill_dst() has taken the required device references. | ||||
| CVE-2026-98194 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: libertas_tf: fix UAF in lbtf_free_adapter() lbtf_free_adapter() calls lbtf_free_cmd_buffer() to free the command buffers before calling timer_delete_sync() to wait for the command timer callback. If the timer callback (command_timer_fn) is already running when lbtf_free_cmd_buffer() frees the command array, the callback dereferences priv->cur_cmd->cmdbuf which points to freed memory. Swap the order so that timer_delete_sync() runs first, ensuring any in-flight callback has completed before the command buffers are freed. | ||||
| CVE-2026-98200 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (hp-wmi-sensors) Fix use-after-free in fungible_show() nsensor->current_state is dynamically replaced as the sensor's state changes. update_numeric_sensor_from_wobj() does this by freeing the old string and installing a new one: if (strcmp(trimmed, nsensor->current_state)) { new_string = hp_wmi_strdup(dev, trimmed); if (new_string) { devm_kfree(dev, nsensor->current_state); nsensor->current_state = new_string; } } This function is only ever called from hp_wmi_update_info() while state->lock is held, so the free-and-replace itself is properly serialized against concurrent updates. fungible_show(), however, reads the same pointer after the lock has already been dropped: err = hp_wmi_update_info(state, info); if (err) return err; switch (prop) { ... case HP_WMI_PROPERTY_CURRENT_STATE: seq_printf(seqf, "%s\n", nsensor->current_state); break; hp_wmi_update_info() takes state->lock internally and releases it before returning, so by the time fungible_show() dereferences nsensor->current_state in seq_printf(), no lock is held. Two processes reading a sensor's current_state debugfs entry at overlapping times (or one reading it while another read of the same sensor triggers a refresh) can race: one thread's seq_printf() can be part-way through printing the string at the moment another thread's call into update_numeric_sensor_from_wobj() frees it with devm_kfree() and installs a new pointer, causing a use-after-free read. Take state->lock around the read in fungible_show() as well, so it can never run concurrently with the free-and-replace in update_numeric_sensor_from_wobj(). | ||||
| CVE-2026-98367 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Clear association under lock if siw_qp_modify fails in siw_accept We need to clear cep before release state_lock as siw_qp_llp_close and siw_qp_modify->siw_qp_llp_close did. Otherwise if siw_qp_modify() fails in siw_accept(), the QP's state_lock is released before the error path cleanup. A concurrent ibv_modify_qp() transitioning the QP to ERROR can race in this window: siw_accept() ibv_modify_qp(ERROR) ---------------------- ---------------------- siw_qp_modify() fails up_write(&qp->state_lock) down_write(&qp->state_lock) nextstate_from_idle(): if (qp->cep) siw_cep_put(qp->cep) <- frees cep qp->cep = NULL goto error cep->qp = NULL <- UAF Clear qp->cep and drop the association reference taken by siw_cep_get(), all under the write lock held from the initial down_write(&qp->state_lock). Thread B therefore sees qp->cep == NULL, skips its own put, and cannot free the cep before siw_accept() is done with it. | ||||
| CVE-2026-98180 | 1 Linux | 1 Linux Kernel | 2026-10-09 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: RCU-free the scheduler-containing ring and VM objects Both struct msm_ringbuffer and struct msm_gem_vm embed a struct drm_gpu_scheduler. msm_ringbuffer_destroy() and the VM free callback msm_gem_vm_free() call drm_sched_fini() on the embedded scheduler and then free the containing object with plain kfree(). drm_sched_fence_get_timeline_name() returns fence->sched->name, and the scheduler fence keeps a .release callback so it is not ops-detached on signalling. A finished fence exported to userspace (the submit out-fence, or a VM_BIND fence, via sync_file / drm_syncobj) keeps pointing at the embedded scheduler after the ring/VM is freed, so a later get_timeline_name() -- reachable unprivileged through SYNC_IOC_FILE_INFO -- dereferences freed slab memory (KASAN slab-use-after-free read). Per the dma-fence lifetime contract the exporter must keep the data backing a signalled fence alive for an RCU grace period. Free the scheduler-containing objects with kfree_rcu() instead of kfree(). Patchwork: https://patchwork.freedesktop.org/patch/750234/ | ||||
| CVE-2026-104039 | 2 Redhat, Sssd | 4 Enterprise Linux, Openshift, Openshift Container Platform and 1 more | 2026-10-08 | 4.7 Medium |
| A flaw was found in SSSD. A local user can cause a denial of service (DoS) by disrupting system authentication services. When handling Generic Security Services Application Programming Interface (GSSAPI) authentication in the Pluggable Authentication Module (PAM) responder, cached connection state is freed upon completion without clearing the reference pointer. An attacker can exploit this by sending an additional request over the same connection, causing the service to access invalid memory and unexpectedly terminate. | ||||
| CVE-2026-84783 | 2 Openssl, Redhat | 2 Openssl, Hummingbird | 2026-10-08 | 7.5 High |
| Issue summary: The first concurrent use of the same X.509 certificate by several threads may cause its cached extension data to be freed while another thread is still using it. Impact summary: A remote, unauthenticated peer could crash a multi-threaded TLS client, or a multi-threaded TLS server that requests client certificates, if the first certificate chains built to the same trusted CA certificate are built by several connections at the same time. This is a use-after-free read, which is likely to crash the process, resulting in a Denial of Service. CWE: CWE-416: Use After Free Description: OpenSSL caches the decoded values of a certificate's X.509v3 extensions inside the X509 object the first time they are needed. In OpenSSL 4.0 this cache is built in two phases: the extension values are computed while holding a read lock on the certificate, and the results are then installed into the certificate under a write lock. Because a read lock does not exclude other readers, several threads can compute the cache for the same certificate at the same time. Each thread that subsequently acquires the write lock installs its own results and frees the values installed by the thread before it, even though that earlier thread has already marked the cache as complete and may have returned pointers into it to its caller. A caller still using those pointers then reads freed memory. Any certificate shared between threads is exposed the first time its extensions are decoded. In TLS the certificates at risk are the trusted CA certificates supplied for chain verification, by whatever means, since these are shared by every connection and their extensions are decoded and cached the first time a chain is built to them. Certificates sent by the peer are decoded separately for each connection and are not shared, so they are not affected. In a TLS client verifying server certificates, or a TLS server that requests and verifies client certificates, the use-after-free could only occur if the first chains built to the same trusted CA are built by several connections at the same time. FIPS impact: no The FIPS module is not affected as X.509 certificate handling is outside of the OpenSSL FIPS module boundary. OpenSSL 4.0 is vulnerable to this issue. OpenSSL 3.6, 3.5, 3.4, 3.0, 1.1.1 and 1.0.2 are not affected by this issue. OpenSSL 4.0 users should upgrade to OpenSSL 4.0.3. This issue was reported on 27 August 2026 by Tim Becker (Xint.io) and independently in a public report on 31 August 2026 by aydinmercan. The fix has been developed by Bob Beck. -- cut (non-publishing metadata for internal use) -- Reported by: Tim Becker (Xint.io), aydinmercan Fixed by: Bob Beck | ||||
| CVE-2026-98360 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: insert mcg into mcg_tree only after rxe_mcast_add() succeeds rxe_get_mcg() publishes a newly allocated multicast group in rxe->mcg_tree before programming the backing Ethernet multicast address with rxe_mcast_add(), which runs outside mcg_lock. A local userspace RDMA client reaches this path with ATTACH_MCAST on a UD QP; if rxe_mcast_add() then returns an error (for example -ENODEV when the backing netdev has been removed, or a propagated dev_mc_add() error), the unwind frees the published group without removing it from the tree. A later lookup of the same MGID dereferences the freed struct rxe_mcg from __rxe_lookup_mcg(). Fix this by keeping the new mcg private until rxe_mcast_add() succeeds. Split the tree publication into __rxe_publish_mcg(), call rxe_mcast_add() before taking the tree reference, and free the still-private mcg on failure. Because the group is never visible in mcg_tree until the multicast address is programmed, no concurrent caller can look it up or attach a QP to a group that is about to be torn down, so the error path needs no conditional unwind. If another caller publishes the same MGID while the address is being programmed, the post-add re-check under mcg_lock finds the winner; this caller then drops its private object and balances its own rxe_mcast_add() with rxe_mcast_del() before returning the winner. Reproduced by forcing the rxe_mcast_add() error return under KASAN: without the change the next attach to the same MGID reports a slab-use-after-free in __rxe_lookup_mcg(); with it the forced failure returns cleanly. A no-injection attach/detach regression, including a two-QP shared join/leave and re-attach, stays KASAN- and leak-clean. | ||||
| CVE-2026-98239 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net: lan743x: fix RX checksum use-after-free lan743x_rx_process_buffer() adds each non-first receive buffer to the head skb's frag_list. On the last descriptor, lan743x_rx_trim_skb() linearizes the head and frees the fragment skb metadata. The checksum-success path then writes ip_summed through the local skb pointer, which still points to the final fragment. This causes a use-after-free write when a packet spans more than one receive buffer. Set ip_summed on the surviving head skb instead. Multi-buffer receive can occur after a live MTU increase because existing ring entries keep their old buffer size until they are replenished. A KUnit test invoking lan743x_rx_process_buffer() with a two-buffer packet produced a one-byte KASAN use-after-free write before this change. The same test passed after the change. The driver object also builds with W=1. This was not tested on physical LAN743x hardware. | ||||
| CVE-2026-98357 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: IB/isert: wait for deferred control PDU completions before releasing the connection isert_send_done() hands ISTATE_SEND_TASKMGTRSP, ISTATE_SEND_REJECT and ISTATE_SEND_TEXTRSP completions off to isert_comp_wq and returns. The work item then runs isert_completion_put() -> isert_put_cmd(), which reads isert_conn->conn and takes conn->cmd_lock. Nothing orders that work item against teardown. isert_wait_conn() queues isert_release_work, which frees isert_conn, and iscsit_close_connection() frees the iscsit_conn right after it returns, so the queued work can run against freed memory. Count the deferred control PDU completions per connection and let isert_wait_conn() wait for them before the release work is queued. ISTATE_SEND_LOGOUTRSP is deliberately not counted: that branch runs iscsit_logout_post_handler(), which ends up waiting for conn->conn_wait_comp, and that completion is only sent by iscsit_close_connection() after it has called iscsit_wait_conn(). Waiting for it here would deadlock. Its wait stays the existing isert_wait4logout(). The splat below is from a kernel with tracing printk()s and an msleep(200) injected into isert_do_control_comp() to widen the window: BUG: KASAN: slab-use-after-free in isert_put_cmd+0x53d/0x620 Read of size 8 at addr ffff8881054f1038 by task kworker/u17:1/182 CPU: 0 UID: 0 PID: 182 Comm: kworker/u17:1 Tainted: G B 7.2.0-rc5-TWIDE-gb8babf08acc7 #1 PREEMPT(lazy) Tainted: [B]=BAD_PAGE Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: isert_comp_wq isert_do_control_comp Call Trace: <TASK> dump_stack_lvl+0x53/0x70 print_report+0xd0/0x630 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x3e/0x70 ? isert_put_cmd+0x53d/0x620 kasan_report+0xce/0x100 ? isert_put_cmd+0x53d/0x620 isert_put_cmd+0x53d/0x620 ? isert_completion_put+0x305/0x330 ? isert_do_control_comp+0x2ef/0x310 process_one_work+0x633/0x1030 ? assign_work+0x11d/0x370 worker_thread+0x45b/0xd10 ? __pfx_worker_thread+0x10/0x10 ? __pfx_worker_thread+0x10/0x10 kthread+0x2c6/0x3b0 ? recalc_sigpending+0x15c/0x1e0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x36e/0x5a0 ? __pfx_ret_from_fork+0x10/0x10 ? __switch_to+0x572/0xdd0 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 48: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 __kmalloc_cache_noprof+0x158/0x370 isert_cma_handler+0x1e3/0x2ae0 cma_cm_event_handler+0x3e/0x240 cma_ib_req_handler+0x17d9/0x4490 cm_process_work+0x41/0x330 cm_work_handler+0x5727/0xc160 process_one_work+0x633/0x1030 worker_thread+0x45b/0xd10 kthread+0x2c6/0x3b0 ret_from_fork+0x36e/0x5a0 ret_from_fork_asm+0x1a/0x30 Freed by task 184: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kfree+0x121/0x380 iscsit_close_connection+0x7cf/0x1e60 iscsit_take_action_for_connection_exit+0x1b6/0x360 iscsi_target_tx_thread+0x472/0x690 kthread+0x2c6/0x3b0 ret_from_fork+0x36e/0x5a0 ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2026-98261 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: cifs: Fix server use-after-free in cifs_chan_skip_or_disable() When a secondary channel is no longer supported by the server, cifs_chan_skip_or_disable() drops the channel reference with cifs_put_tcp_session() and then continues to use the server pointer by calling cifs_signal_cifsd_for_reconnect() on it and reading its primary_server pointer. cifs_put_tcp_session() can drop the last reference of the channel and tear it down, so both the channel and the primary server (whose reference is also dropped by cifs_put_tcp_session()) can be freed before they are signaled for reconnect. Signal the channel and the primary server and capture the primary server pointer before dropping the channel reference with cifs_put_tcp_session(). | ||||
| CVE-2026-98243 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: dma-buf/dma-fence: fix checking signaling bit for timeline and driver name v3 The patch "dma-buf: dma-fence: Fix potential NULL pointer dereference" changed the check to test for the ops pointer instead of the signaled bit to avoid a potential NULL dereference when the ops pointer has been cleared. The problem is now that the ops pointer is cleared only when neither the release nor the wait callback is implemented and this isn't true for a lot of dma_fence implementations yet. So those implementations lost the RCU protection after signaling of the returned string resulting in potential use after free. Add the signaling check additional to the ops pointer check so that we have both the protection against NULL dereference as well as the RCU protection after signaling for the returned string. v2: improve comments to note RCU protection and explain why we check both signaling state and ops pointer v3: some comment improvements suggested by Philip | ||||
| CVE-2026-98256 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: signal: Prevent exec() race Hyunwoo debugged the following KASAN UAF splat: BUG: KASAN: slab-use-after-free in __send_signal_locked+0xb27/0xba0 Write of size 8 at addr ffff888007ed80c8 by task poc/79 ... Call Trace: __send_signal_locked+0xb27/0xba0 do_send_sig_info+0xa7/0x160 do_send_specific+0x76/0xa0 __x64_sys_tgkill+0x193/0x270 ... Allocated by task 80: do_timer_create+0x1a4/0x1030 __x64_sys_timer_create+0x145/0x190 ... Freed by task 12: kmem_cache_free_bulk+0x1f8/0x4a0 kvfree_rcu_bulk+0x14f/0x1c0 kfree_rcu_work+0x128/0x1a0 ... Last potentially related work creation: kvfree_call_rcu+0x39/0x390 __flush_itimer_signals+0x211/0x320 flush_itimer_signals+0x47/0x90 begin_new_exec+0xa6b/0x28c0 It turned out that this happens with a non-leader exec() as Hyunwoo explained: de_thread() calls exchange_tids() before release_task(leader), so the struct pid held by a SIGEV_THREAD_ID timer created against the leader's tid now points to the thread which called execve(). pid_task() returns that thread and lock_task_sighand() on it succeeds. If the timer signal is blocked, its sigqueue stays queued on the leader's task::pending. The next expiry of that timer can then run while release_task() flushes the queue. posixtimer_send_sigqueue() checks whether the sigqueue is already queued with a plain list_empty(), which only reads list_head::next. list_del_init() is not atomic and INIT_LIST_HEAD() stores list_head::next before list_head::prev, so the check can pass in between. list_add_tail() queues the entry on the task::pending of the live thread, and the list_head::prev store from the flush then overwrites the list_head::prev link that list_add_tail() has just set. __flush_itimer_signals() does not undo that either. With list_head::prev pointing at the entry itself, its list_del_init() only stores the same values again, so the entry is not removed from the list. It is still there after the last reference is dropped and the timer is freed by RCU, and the list_add_tail() of a later tgkill() follows that list_head::prev into the freed timer. This problem surfaced with the recent commit which moved the sigqueue flush out of the sighand lock held region. Hyonwoo proposed to fix this by using list_del_init_careful(), but that just papers over the problem. After some disucssions and various attempts to solve it, Eric pointed out that there is no reason to flush task::pending late in release_task() and it should be done in exit_signals() already. As nothing can collect and deliver signals which are queued in a dying task's pending queue, there is no reason to delay it further. But it has to be ensured that no signals can be queued into it after that point. exit_signals() sets PF_EXITING in task::flags, which can be used as an indicator for this. Cure it by: - Preventing signal queueing for task private signals (PIDTYPE_PID) when the task has PF_EXITING set in __send_signal_locked() and in posixtimer_send_sigqueue(). - Protecting the unlocked setting of PF_EXITING in exit_signals() for the task group empty and the group exit case with sighand lock - Flushing task::pending signals right there. Optimize that by moving the whole pending list to an on-stack list head under sighand lock and free the signals without the lock held. There has been quite some discussion about the lockless flush and the non-leader exec case on weakly ordered systems. The problem is that a third party which tries to send a posix timer signal relies on the PID lookup to find the target task and that lookup might result in the new leader when the signal was originaly directed to the old leader. In case that the signal was queued on the old leader then the lockless flush raised a concern over the following situation: old_leader new_leader third party A: flush_list() // list_del_in ---truncated--- | ||||
| CVE-2026-98320 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: hold reference on ct until flow is released nf_ct_put() releases the ct->ext area inmediately, the rcu typesafe semantics also allow to refer to the wrong conntrack from the flowtable datapath. Hold reference on ct until flow is released after rcu grace period. Add rcu_barrier() on module exit path, to ensure pending flow entries are release before module goes away. | ||||
| CVE-2026-98246 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Serialize local codec list cleanup hci_dev_close_sync() clears hdev->local_codecs after releasing hdev->lock. Codec list additions and both traversals in sco_sock_getsockopt() use that lock, but the close path does not. A close and BT_CODEC query can therefore interleave as follows: hci_dev_close_sync() sco_sock_getsockopt() hci_dev_lock() fetch codec entry hci_codec_list_clear() kfree(entry) read entry->id The reader then accesses an entry which the close path has freed. KASAN BUG: KASAN: slab-use-after-free in sco_sock_getsockopt+0xfa0/0xfe0 Read of size 1 at addr ffff8881001c3450 Call Trace: sco_sock_getsockopt+0xfa0/0xfe0 do_sock_getsockopt+0x537/0x7b0 __sys_getsockopt+0xf2/0x170 Allocated by task 92: hci_codec_list_add.isra.0+0x2c/0x440 hci_read_codec_capabilities+0x224/0x590 hci_read_supported_codecs+0x2c2/0x640 Freed by task 92: kfree+0x131/0x3c0 hci_codec_list_clear+0xd8/0x160 hci_dev_close_sync+0x92a/0xfa0 Take hdev->lock around the clear operation at its existing point in the close path. This makes the clear wait for active readers and prevents a new traversal until the list is empty without changing teardown ordering. | ||||
| CVE-2026-98229 | 1 Linux | 1 Linux Kernel | 2026-10-07 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: save input state data before secpath resets xfrm_input() stores the current xfrm_state in the skb secpath while it continues receive-side processing. Some input paths can reset that secpath before xfrm_input() has finished dereferencing the state. Receive callback users such as VTI and XFRM interfaces can reset the secpath. The VTI receive path does so before checking whether the packet crosses network namespaces, while the XFRM interface path does so only for cross-network-namespace packets. The XFRM_MAX_DEPTH error path can also reset the secpath before the final drop callback reports the current state's protocol. If secpath_reset() drops the last state reference while the state is concurrently deleted, xfrm_input() can still dereference the freed state when selecting transport_finish() or reporting the drop callback protocol. Save the state protocol on the stack while the state is still valid, and use the already saved address family for transport_finish(). A larval XFRM_STATE_ACQ state has no type, so retain nexthdr as its protocol. This preserves the existing drop-path fallback while avoiding the post-reset state dereferences without adding an extra state reference to every received packet. | ||||