| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: prevent possible UaF in addrconf_permanent_addr()
The mentioned helper try to warn the user about an exceptional
condition, but the message is delivered too late, accessing the ipv6
after its possible deletion.
Reorder the statement to avoid the possible UaF; while at it, place the
warning outside the idev->lock as it needs no protection. |
| In the Linux kernel, the following vulnerability has been resolved:
dm: clear cloned request bio pointer when last clone bio completes
Stale rq->bio values have been observed to cause double-initialization of
cloned bios in request-based device-mapper targets, leading to
use-after-free and double-free scenarios.
One such case occurs when using dm-multipath on top of a PCIe NVMe
namespace, where cloned request bios are freed during
blk_complete_request(), but rq->bio is left intact. Subsequent clone
teardown then attempts to free the same bios again via
blk_rq_unprep_clone().
The resulting double-free path looks like:
nvme_pci_complete_batch()
nvme_complete_batch()
blk_mq_end_request_batch()
blk_complete_request() // called on a DM clone request
bio_endio() // first free of all clone bios
...
rq->end_io() // end_clone_request()
dm_complete_request(tio->orig)
dm_softirq_done()
dm_done()
dm_end_request()
blk_rq_unprep_clone() // second free of clone bios
Fix this by clearing the clone request's bio pointer when the last cloned
bio completes, ensuring that later teardown paths do not attempt to free
already-released bios. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: fix use-after-free in add_adev() error path
If auxiliary_device_add() fails, add_adev() jumps to add_fail and calls
auxiliary_device_uninit(adev).
The auxiliary device has its release callback set to adev_release(),
which frees the containing struct mana_adev. Since adev is embedded in
struct mana_adev, the subsequent fall-through to init_fail and access
to adev->id may result in a use-after-free.
Fix this by saving the allocated auxiliary device id in a local
variable before calling auxiliary_device_add(), and use that saved id
in the cleanup path after auxiliary_device_uninit(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: sockmap: Fix use-after-free of sk->sk_socket in sk_psock_verdict_data_ready().
syzbot reported use-after-free of AF_UNIX socket's sk->sk_socket
in sk_psock_verdict_data_ready(). [0]
In unix_stream_sendmsg(), the peer socket's ->sk_data_ready() is
called after dropping its unix_state_lock().
Although the sender socket holds the peer's refcount, it does not
prevent the peer's sock_orphan(), and the peer's sk_socket might
be freed after one RCU grace period.
Let's fetch the peer's sk->sk_socket and sk->sk_socket->ops under
RCU in sk_psock_verdict_data_ready().
[0]:
BUG: KASAN: slab-use-after-free in sk_psock_verdict_data_ready+0xec/0x590 net/core/skmsg.c:1278
Read of size 8 at addr ffff8880594da860 by task syz.4.1842/11013
CPU: 1 UID: 0 PID: 11013 Comm: syz.4.1842 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2026
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xba/0x230 mm/kasan/report.c:482
kasan_report+0x117/0x150 mm/kasan/report.c:595
sk_psock_verdict_data_ready+0xec/0x590 net/core/skmsg.c:1278
unix_stream_sendmsg+0x8a3/0xe80 net/unix/af_unix.c:2482
sock_sendmsg_nosec net/socket.c:721 [inline]
__sock_sendmsg net/socket.c:736 [inline]
____sys_sendmsg+0x972/0x9f0 net/socket.c:2585
___sys_sendmsg+0x2a5/0x360 net/socket.c:2639
__sys_sendmsg net/socket.c:2671 [inline]
__do_sys_sendmsg net/socket.c:2676 [inline]
__se_sys_sendmsg net/socket.c:2674 [inline]
__x64_sys_sendmsg+0x1bd/0x2a0 net/socket.c:2674
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x14d/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7facf899c819
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007facf9827028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007facf8c15fa0 RCX: 00007facf899c819
RDX: 0000000000000000 RSI: 0000200000000500 RDI: 0000000000000004
RBP: 00007facf8a32c91 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007facf8c16038 R14: 00007facf8c15fa0 R15: 00007ffd41b01c78
</TASK>
Allocated by task 11013:
kasan_save_stack mm/kasan/common.c:57 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:78
unpoison_slab_object mm/kasan/common.c:340 [inline]
__kasan_slab_alloc+0x6c/0x80 mm/kasan/common.c:366
kasan_slab_alloc include/linux/kasan.h:253 [inline]
slab_post_alloc_hook mm/slub.c:4538 [inline]
slab_alloc_node mm/slub.c:4866 [inline]
kmem_cache_alloc_lru_noprof+0x2b8/0x640 mm/slub.c:4885
sock_alloc_inode+0x28/0xc0 net/socket.c:316
alloc_inode+0x6a/0x1b0 fs/inode.c:347
new_inode_pseudo include/linux/fs.h:3003 [inline]
sock_alloc net/socket.c:631 [inline]
__sock_create+0x12d/0x9d0 net/socket.c:1562
sock_create net/socket.c:1656 [inline]
__sys_socketpair+0x1c4/0x560 net/socket.c:1803
__do_sys_socketpair net/socket.c:1856 [inline]
__se_sys_socketpair net/socket.c:1853 [inline]
__x64_sys_socketpair+0x9b/0xb0 net/socket.c:1853
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x14d/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 15:
kasan_save_stack mm/kasan/common.c:57 [inline]
kasan_save_track+0x3e/0x80 mm/kasan/common.c:78
kasan_save_free_info+0x46/0x50 mm/kasan/generic.c:584
poison_slab_object mm/kasan/common.c:253 [inline]
__kasan_slab_free+0x5c/0x80 mm/kasan/common.c:285
kasan_slab_free include/linux/kasan.h:235 [inline]
slab_free_hook mm/slub.c:2685 [inline]
slab_free mm/slub.c:6165 [inline]
kmem_cache_free+0x187/0x630 mm/slub.c:6295
rcu_do_batch kernel/rcu/tree.c:
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
usb: usbtmc: Flush anchored URBs in usbtmc_release
When calling usbtmc_release, pending anchored URBs must be flushed or
killed to prevent use-after-free errors (e.g. in the HCD giveback
path). Call usbtmc_draw_down() to allow anchored URBs to be completed. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: fix use-after-free in timeout object destroy
nft_ct_timeout_obj_destroy() frees the timeout object with kfree()
immediately after nf_ct_untimeout(), without waiting for an RCU grace
period. Concurrent packet processing on other CPUs may still hold
RCU-protected references to the timeout object obtained via
rcu_dereference() in nf_ct_timeout_data().
Add an rcu_head to struct nf_ct_timeout and use kfree_rcu() to defer
freeing until after an RCU grace period, matching the approach already
used in nfnetlink_cttimeout.c.
KASAN report:
BUG: KASAN: slab-use-after-free in nf_conntrack_tcp_packet+0x1381/0x29d0
Read of size 4 at addr ffff8881035fe19c by task exploit/80
Call Trace:
nf_conntrack_tcp_packet+0x1381/0x29d0
nf_conntrack_in+0x612/0x8b0
nf_hook_slow+0x70/0x100
__ip_local_out+0x1b2/0x210
tcp_sendmsg_locked+0x722/0x1580
__sys_sendto+0x2d8/0x320
Allocated by task 75:
nft_ct_timeout_obj_init+0xf6/0x290
nft_obj_init+0x107/0x1b0
nf_tables_newobj+0x680/0x9c0
nfnetlink_rcv_batch+0xc29/0xe00
Freed by task 26:
nft_obj_destroy+0x3f/0xa0
nf_tables_trans_destroy_work+0x51c/0x5c0
process_one_work+0x2c4/0x5a0 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Use scratch field in MMIO fragment to hold small write values
When exiting to userspace to service an emulated MMIO write, copy the
to-be-written value to a scratch field in the MMIO fragment if the size
of the data payload is 8 bytes or less, i.e. can fit in a single chunk,
instead of pointing the fragment directly at the source value.
This fixes a class of use-after-free bugs that occur when the emulator
initiates a write using an on-stack, local variable as the source, the
write splits a page boundary, *and* both pages are MMIO pages. Because
KVM's ABI only allows for physically contiguous MMIO requests, accesses
that split MMIO pages are separated into two fragments, and are sent to
userspace one at a time. When KVM attempts to complete userspace MMIO in
response to KVM_RUN after the first fragment, KVM will detect the second
fragment and generate a second userspace exit, and reference the on-stack
variable.
The issue is most visible if the second KVM_RUN is performed by a separate
task, in which case the stack of the initiating task can show up as truly
freed data.
==================================================================
BUG: KASAN: use-after-free in complete_emulated_mmio+0x305/0x420
Read of size 1 at addr ffff888009c378d1 by task syz-executor417/984
CPU: 1 PID: 984 Comm: syz-executor417 Not tainted 5.10.0-182.0.0.95.h2627.eulerosv2r13.x86_64 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 Call Trace:
dump_stack+0xbe/0xfd
print_address_description.constprop.0+0x19/0x170
__kasan_report.cold+0x6c/0x84
kasan_report+0x3a/0x50
check_memory_region+0xfd/0x1f0
memcpy+0x20/0x60
complete_emulated_mmio+0x305/0x420
kvm_arch_vcpu_ioctl_run+0x63f/0x6d0
kvm_vcpu_ioctl+0x413/0xb20
__se_sys_ioctl+0x111/0x160
do_syscall_64+0x30/0x40
entry_SYSCALL_64_after_hwframe+0x67/0xd1
RIP: 0033:0x42477d
Code: <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007faa8e6890e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000004d7338 RCX: 000000000042477d
RDX: 0000000000000000 RSI: 000000000000ae80 RDI: 0000000000000005
RBP: 00000000004d7330 R08: 00007fff28d546df R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004d733c
R13: 0000000000000000 R14: 000000000040a200 R15: 00007fff28d54720
The buggy address belongs to the page:
page:0000000029f6a428 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x9c37
flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
raw: 000fffffc0000000 0000000000000000 ffffea0000270dc8 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888009c37780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888009c37800: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff888009c37880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff888009c37900: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888009c37980: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================
The bug can also be reproduced with a targeted KVM-Unit-Test by hacking
KVM to fill a large on-stack variable in complete_emulated_mmio(), i.e. by
overwrite the data value with garbage.
Limit the use of the scratch fields to 8-byte or smaller accesses, and to
just writes, as larger accesses and reads are not affected thanks to
implementation details in the emulator, but add a sanity check to ensure
those details don't change in the future. Specifically, KVM never uses
on-stack variables for accesses larger that 8 bytes, e.g. uses an operand
in the emulator context, and *al
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Require sys_futex_requeue() to have identical flags
Nicholas reported that his LLM found it was possible to create a UaF
when sys_futex_requeue() is used with different flags. The initial
motivation for allowing different flags was the variable sized futex,
but since that hasn't been merged (yet), simply mandate the flags are
identical, as is the case for the old style sys_futex() requeue
operations. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix dangling pointer on mgmt_add_adv_patterns_monitor_complete
This fixes the condition checking so mgmt_pending_valid is executed
whenever status != -ECANCELED otherwise calling mgmt_pending_free(cmd)
would kfree(cmd) without unlinking it from the list first, leaving a
dangling pointer. Any subsequent list traversal (e.g.,
mgmt_pending_foreach during __mgmt_power_off, or another
mgmt_pending_valid call) would dereference freed memory. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix use-after-free in update_super_work when racing with umount
Commit b98535d09179 ("ext4: fix bug_on in start_this_handle during umount
filesystem") moved ext4_unregister_sysfs() before flushing s_sb_upd_work
to prevent new error work from being queued via /proc/fs/ext4/xx/mb_groups
reads during unmount. However, this introduced a use-after-free because
update_super_work calls ext4_notify_error_sysfs() -> sysfs_notify() which
accesses the kobject's kernfs_node after it has been freed by kobject_del()
in ext4_unregister_sysfs():
update_super_work ext4_put_super
----------------- --------------
ext4_unregister_sysfs(sb)
kobject_del(&sbi->s_kobj)
__kobject_del()
sysfs_remove_dir()
kobj->sd = NULL
sysfs_put(sd)
kernfs_put() // RCU free
ext4_notify_error_sysfs(sbi)
sysfs_notify(&sbi->s_kobj)
kn = kobj->sd // stale pointer
kernfs_get(kn) // UAF on freed kernfs_node
ext4_journal_destroy()
flush_work(&sbi->s_sb_upd_work)
Instead of reordering the teardown sequence, fix this by making
ext4_notify_error_sysfs() detect that sysfs has already been torn down
by checking s_kobj.state_in_sysfs, and skipping the sysfs_notify() call
in that case. A dedicated mutex (s_error_notify_mutex) serializes
ext4_notify_error_sysfs() against kobject_del() in ext4_unregister_sysfs()
to prevent TOCTOU races where the kobject could be deleted between the
state_in_sysfs check and the sysfs_notify() call. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: EC: clean up handlers on probe failure in acpi_ec_setup()
When ec_install_handlers() returns -EPROBE_DEFER on reduced-hardware
platforms, it has already started the EC and installed the address
space handler with the struct acpi_ec pointer as handler context.
However, acpi_ec_setup() propagates the error without any cleanup.
The caller acpi_ec_add() then frees the struct acpi_ec for non-boot
instances, leaving a dangling handler context in ACPICA.
Any subsequent AML evaluation that accesses an EC OpRegion field
dispatches into acpi_ec_space_handler() with the freed pointer,
causing a use-after-free:
BUG: KASAN: slab-use-after-free in mutex_lock (kernel/locking/mutex.c:289)
Write of size 8 at addr ffff88800721de38 by task init/1
Call Trace:
<TASK>
mutex_lock (kernel/locking/mutex.c:289)
acpi_ec_space_handler (drivers/acpi/ec.c:1362)
acpi_ev_address_space_dispatch (drivers/acpi/acpica/evregion.c:293)
acpi_ex_access_region (drivers/acpi/acpica/exfldio.c:246)
acpi_ex_field_datum_io (drivers/acpi/acpica/exfldio.c:509)
acpi_ex_extract_from_field (drivers/acpi/acpica/exfldio.c:700)
acpi_ex_read_data_from_field (drivers/acpi/acpica/exfield.c:327)
acpi_ex_resolve_node_to_value (drivers/acpi/acpica/exresolv.c:392)
</TASK>
Allocated by task 1:
acpi_ec_alloc (drivers/acpi/ec.c:1424)
acpi_ec_add (drivers/acpi/ec.c:1692)
Freed by task 1:
kfree (mm/slub.c:6876)
acpi_ec_add (drivers/acpi/ec.c:1751)
The bug triggers on reduced-hardware EC platforms (ec->gpe < 0)
when the GPIO IRQ provider defers probing. Once the stale handler
exists, any unprivileged sysfs read that causes AML to touch an
EC OpRegion (battery, thermal, backlight) exercises the dangling
pointer.
Fix this by calling ec_remove_handlers() in the error path of
acpi_ec_setup() before clearing first_ec. ec_remove_handlers()
checks each EC_FLAGS_* bit before acting, so it is safe to call
regardless of how far ec_install_handlers() progressed:
-ENODEV (handler not installed): only calls acpi_ec_stop()
-EPROBE_DEFER (handler installed): removes handler, stops EC |
| In the Linux kernel, the following vulnerability has been resolved:
spi: fix use-after-free on controller registration failure
Make sure to deregister from driver core also in the unlikely event that
per-cpu statistics allocation fails during controller registration to
avoid use-after-free (of driver resources) and unclocked register
accesses. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free of share_conf in compound request
smb2_get_ksmbd_tcon() reuses work->tcon in compound requests without
validating tcon->t_state. ksmbd_tree_conn_lookup() checks t_state ==
TREE_CONNECTED on the initial lookup path, but the compound reuse path
bypasses this check entirely.
If a prior command in the compound (SMB2_TREE_DISCONNECT) sets t_state
to TREE_DISCONNECTED and frees share_conf via ksmbd_share_config_put(),
subsequent commands dereference the freed share_conf through
work->tcon->share_conf.
KASAN report:
[ 4.144653] ==================================================================
[ 4.145059] BUG: KASAN: slab-use-after-free in smb2_write+0xc74/0xe70
[ 4.145415] Read of size 4 at addr ffff88810430c194 by task kworker/1:1/44
[ 4.145772]
[ 4.145867] CPU: 1 UID: 0 PID: 44 Comm: kworker/1:1 Not tainted 7.0.0-rc3+ #60 PREEMPTLAZY
[ 4.145871] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 4.145875] Workqueue: ksmbd-io handle_ksmbd_work
[ 4.145888] Call Trace:
[ 4.145892] <TASK>
[ 4.145894] dump_stack_lvl+0x64/0x80
[ 4.145910] print_report+0xce/0x660
[ 4.145919] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 4.145928] ? smb2_write+0xc74/0xe70
[ 4.145931] kasan_report+0xce/0x100
[ 4.145934] ? smb2_write+0xc74/0xe70
[ 4.145937] smb2_write+0xc74/0xe70
[ 4.145939] ? __pfx_smb2_write+0x10/0x10
[ 4.145942] ? _raw_spin_unlock+0xe/0x30
[ 4.145945] ? ksmbd_smb2_check_message+0xeb2/0x24c0
[ 4.145948] ? smb2_tree_disconnect+0x31c/0x480
[ 4.145951] handle_ksmbd_work+0x40f/0x1080
[ 4.145953] process_one_work+0x5fa/0xef0
[ 4.145962] ? assign_work+0x122/0x3e0
[ 4.145964] worker_thread+0x54b/0xf70
[ 4.145967] ? __pfx_worker_thread+0x10/0x10
[ 4.145970] kthread+0x346/0x470
[ 4.145976] ? recalc_sigpending+0x19b/0x230
[ 4.145980] ? __pfx_kthread+0x10/0x10
[ 4.145984] ret_from_fork+0x4fb/0x6c0
[ 4.145992] ? __pfx_ret_from_fork+0x10/0x10
[ 4.145995] ? __switch_to+0x36c/0xbe0
[ 4.145999] ? __pfx_kthread+0x10/0x10
[ 4.146003] ret_from_fork_asm+0x1a/0x30
[ 4.146013] </TASK>
[ 4.146014]
[ 4.149858] Allocated by task 44:
[ 4.149953] kasan_save_stack+0x33/0x60
[ 4.150061] kasan_save_track+0x14/0x30
[ 4.150169] __kasan_kmalloc+0x8f/0xa0
[ 4.150274] ksmbd_share_config_get+0x1dd/0xdd0
[ 4.150401] ksmbd_tree_conn_connect+0x7e/0x600
[ 4.150529] smb2_tree_connect+0x2e6/0x1000
[ 4.150645] handle_ksmbd_work+0x40f/0x1080
[ 4.150761] process_one_work+0x5fa/0xef0
[ 4.150873] worker_thread+0x54b/0xf70
[ 4.150978] kthread+0x346/0x470
[ 4.151071] ret_from_fork+0x4fb/0x6c0
[ 4.151176] ret_from_fork_asm+0x1a/0x30
[ 4.151286]
[ 4.151332] Freed by task 44:
[ 4.151418] kasan_save_stack+0x33/0x60
[ 4.151526] kasan_save_track+0x14/0x30
[ 4.151634] kasan_save_free_info+0x3b/0x60
[ 4.151751] __kasan_slab_free+0x43/0x70
[ 4.151861] kfree+0x1ca/0x430
[ 4.151952] __ksmbd_tree_conn_disconnect+0xc8/0x190
[ 4.152088] smb2_tree_disconnect+0x1cd/0x480
[ 4.152211] handle_ksmbd_work+0x40f/0x1080
[ 4.152326] process_one_work+0x5fa/0xef0
[ 4.152438] worker_thread+0x54b/0xf70
[ 4.152545] kthread+0x346/0x470
[ 4.152638] ret_from_fork+0x4fb/0x6c0
[ 4.152743] ret_from_fork_asm+0x1a/0x30
[ 4.152853]
[ 4.152900] The buggy address belongs to the object at ffff88810430c180
[ 4.152900] which belongs to the cache kmalloc-96 of size 96
[ 4.153226] The buggy address is located 20 bytes inside of
[ 4.153226] freed 96-byte region [ffff88810430c180, ffff88810430c1e0)
[ 4.153549]
[ 4.153596] The buggy address belongs to the physical page:
[ 4.153750] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff88810430ce80 pfn:0x10430c
[ 4.154000] flags: 0x
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: release flowtable after rcu grace period on error
Call synchronize_rcu() after unregistering the hooks from error path,
since a hook that already refers to this flowtable can be already
registered, exposing this flowtable to packet path and nfnetlink_hook
control plane.
This error path is rare, it should only happen by reaching the maximum
number hooks or by failing to set up to hardware offload, just call
synchronize_rcu().
There is a check for already used device hooks by different flowtable
that could result in EEXIST at this late stage. The hook parser can be
updated to perform this check earlier to this error path really becomes
rarely exercised.
Uncovered by KASAN reported as use-after-free from nfnetlink_hook path
when dumping hooks. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_pipapo: split gc into unlink and reclaim phase
Yiming Qian reports Use-after-free in the pipapo set type:
Under a large number of expired elements, commit-time GC can run for a very
long time in a non-preemptible context, triggering soft lockup warnings and
RCU stall reports (local denial of service).
We must split GC in an unlink and a reclaim phase.
We cannot queue elements for freeing until pointers have been swapped.
Expired elements are still exposed to both the packet path and userspace
dumpers via the live copy of the data structure.
call_rcu() does not protect us: dump operations or element lookups starting
after call_rcu has fired can still observe the free'd element, unless the
commit phase has made enough progress to swap the clone and live pointers
before any new reader has picked up the old version.
This a similar approach as done recently for the rbtree backend in commit
35f83a75529a ("netfilter: nft_set_rbtree: don't gc elements on insert"). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: cancel rfkill_block work in wiphy_unregister()
There is a use-after-free error in cfg80211_shutdown_all_interfaces found
by syzkaller:
BUG: KASAN: use-after-free in cfg80211_shutdown_all_interfaces+0x213/0x220
Read of size 8 at addr ffff888112a78d98 by task kworker/0:5/5326
CPU: 0 UID: 0 PID: 5326 Comm: kworker/0:5 Not tainted 6.19.0-rc2 #2 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: events cfg80211_rfkill_block_work
Call Trace:
<TASK>
dump_stack_lvl+0x116/0x1f0
print_report+0xcd/0x630
kasan_report+0xe0/0x110
cfg80211_shutdown_all_interfaces+0x213/0x220
cfg80211_rfkill_block_work+0x1e/0x30
process_one_work+0x9cf/0x1b70
worker_thread+0x6c8/0xf10
kthread+0x3c5/0x780
ret_from_fork+0x56d/0x700
ret_from_fork_asm+0x1a/0x30
</TASK>
The problem arises due to the rfkill_block work is not cancelled when wiphy
is being unregistered. In order to fix the issue cancel the corresponding
work in wiphy_unregister().
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
soc: samsung: exynos-pmu: fix use-after-free of interrupt generator node
The setup_cpuhp_and_cpuidle() parses the device tree node for the
interrupt generation block via of_parse_phandle() and decrements its
reference count using of_node_put() immediately after fetching the resource
address. However, later the intr_gen_node pointer is passed into
of_syscon_register_regmap().
Fix this by declaring intr_gen_node with __free() and removing
of_node_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
locking/lockdep: Invalidate stale class_cache entries for zapped classes
syzbot reported a lockdep splat hitting DEBUG_LOCKS_WARN_ON(1) in
hlock_class() due to an invalid class_idx:
WARNING: kernel/locking/lockdep.c:238 at __lock_acquire+0x382/0x2cf0 kernel/locking/lockdep.c:5203
Workqueue: wg-crypt-wg0 wg_packet_tx_worker
RIP: 0010:hlock_class kernel/locking/lockdep.c:238 [inline]
RIP: 0010:check_wait_context kernel/locking/lockdep.c:4870 [inline]
RIP: 0010:__lock_acquire+0x389/0x2cf0 kernel/locking/lockdep.c:5203
Call Trace:
<IRQ>
lock_acquire+0x106/0x350 kernel/locking/lockdep.c:5886
_raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:173
tcp_tsq_handler+0x29/0x200 net/ipv4/tcp_output.c:1291
tcp_tsq_workfn+0x384/0x410 net/ipv4/tcp_output.c:1325
...
When a lock class is zapped (e.g. during module unload or key
unregistration), zap_class() clears the class's bit in
lock_classes_in_use and removes it from the class hash table.
However, existing lockdep_map instances embedded in data structures
may still retain a pointer to the zapped class in their class_cache[]
array.
When __lock_acquire() subsequently runs on such a lock, it finds
lock->class_cache[subclass] != NULL, skipping register_lock_class()
and assigning hlock->class_idx to the index of the zapped class. When
check_wait_context() or hlock_class() inspects the held_lock, it finds
!test_bit(class_idx, lock_classes_in_use) and warns. Furthermore, if
the zapped slot is subsequently re-allocated to an unrelated lock key,
the stale class_cache entry would erroneously match the unrelated
class (ABA issue).
Add lock_class_cache_is_valid() to validate that the cached class is
within lock_classes bounds, still allocated in lock_classes_in_use
(using uninstrumented arch_test_bit() in __always_inline context so it
is safe in noinstr contexts like match_held_lock()), and that
class->key matches the expected subkey (taking lockdep_set_subclass()
overrides into account). Also use READ_ONCE()/WRITE_ONCE() when
accessing class_cache[]. If the entry is invalid or stale, fall back
to register_lock_class() / look_up_lock_class(). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb: 6fire: Avoid embedded URBs
The USB 6fire driver uses URBs embedded in different structs for PCM,
MIDI and communication, and this is basically a buggy implementation
nowadays; since a URB is managed with a refcount, this may lead to a
UAF when the URB is released asynchronously.
For addressing the problem, this patch converts those embedded URBs to
ones that are properly allocated via usb_alloc_urb(). The
pcm_urb.packets[] is gone, as it's allocated by usb_alloc_urb(), hence
it's found in urb.iso_frame_desc[] instead.
The conversions are rather straightforward; each embedded struct urb
is changed to a pointer, and its callers are updated accordingly.
The resource for those structs are released in the common destructor
functions (usb6fire_comm_free(), etc), which are called at both the
init error path and the disconnect.
No functional changes, only compile-tested. |
| Use-after-free vulnerability in VFS in Google gVisor prior to release 20260831.0 on all platforms allows a local attacker with standard container privileges to achieve code execution in the host sentry process by double-freeing the backing MemoryFile from an in-sandbox overlay filesystem. The sentry process remains confined by host-level Linux seccomp and namespace boundaries. |
