| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: tighten UMEM headroom validation to account for tailroom and min frame
The current headroom validation in xdp_umem_reg() could leave us with
insufficient space dedicated to even receive minimum-sized ethernet
frame. Furthermore if multi-buffer would come to play then
skb_shared_info stored at the end of XSK frame would be corrupted.
HW typically works with 128-aligned sizes so let us provide this value
as bare minimum.
Multi-buffer setting is known later in the configuration process so
besides accounting for 128 bytes, let us also take care of tailroom space
upfront. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: multitouch: Check to ensure report responses match the request
It is possible for a malicious (or clumsy) device to respond to a
specific report's feature request using a completely different report
ID. This can cause confusion in the HID core resulting in nasty
side-effects such as OOB writes.
Add a check to ensure that the report ID in the response, matches the
one that was requested. If it doesn't, omit reporting the raw event and
return early. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: icmp: clear skb2->cb[] in ip6_err_gen_icmpv6_unreach()
Sashiko AI-review observed:
In ip6_err_gen_icmpv6_unreach(), the skb is an outer IPv4 ICMP error packet
where its cb contains an IPv4 inet_skb_parm. When skb is cloned into skb2
and passed to icmp6_send(), it uses IP6CB(skb2).
IP6CB interprets the IPv4 inet_skb_parm as an inet6_skb_parm. The cipso
offset in inet_skb_parm.opt directly overlaps with dsthao in inet6_skb_parm
at offset 18.
If an attacker sends a forged ICMPv4 error with a CIPSO IP option, dsthao
would be a non-zero offset. Inside icmp6_send(), mip6_addr_swap() is called
and uses ipv6_find_tlv(skb, opt->dsthao, IPV6_TLV_HAO).
This would scan the inner, attacker-controlled IPv6 packet starting at that
offset, potentially returning a fake TLV without checking if the remaining
packet length can hold the full 18-byte struct ipv6_destopt_hao.
Could mip6_addr_swap() then perform a 16-byte swap that extends past the end
of the packet data into skb_shared_info?
Should the cb array also be cleared in ip6_err_gen_icmpv6_unreach() and
ip6ip6_err() to prevent this?
This patch implements the first suggestion.
I am not sure if ip6ip6_err() needs to be changed.
A separate patch would be better anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_tunnel: clear skb2->cb[] in ip4ip6_err()
Oskar Kjos reported the following problem.
ip4ip6_err() calls icmp_send() on a cloned skb whose cb[] was written
by the IPv6 receive path as struct inet6_skb_parm. icmp_send() passes
IPCB(skb2) to __ip_options_echo(), which interprets that cb[] region
as struct inet_skb_parm (IPv4). The layouts differ: inet6_skb_parm.nhoff
at offset 14 overlaps inet_skb_parm.opt.rr, producing a non-zero rr
value. __ip_options_echo() then reads optlen from attacker-controlled
packet data at sptr[rr+1] and copies that many bytes into dopt->__data,
a fixed 40-byte stack buffer (IP_OPTIONS_DATA_FIXED_SIZE).
To fix this we clear skb2->cb[], as suggested by Oskar Kjos.
Also add minimal IPv4 header validation (version == 4, ihl >= 5). |
| In the Linux kernel, the following vulnerability has been resolved:
Buffer overflow in drivers/xen/sys-hypervisor.c
The build id returned by HYPERVISOR_xen_version(XENVER_build_id) is
neither NUL terminated nor a string.
The first causes a buffer overflow as sprintf in buildid_show will
read and copy till it finds a NUL.
00000000 f4 91 51 f4 dd 38 9e 9d 65 47 52 eb 10 71 db 50 |..Q..8..eGR..q.P|
00000010 b9 a8 01 42 6f 2e 32 |...Bo.2|
00000017
So use a memcpy instead of sprintf to have the correct value:
00000000 f4 91 51 f4 dd 00 9e 9d 65 47 52 eb 10 71 db 50 |..Q.....eGR..q.P|
00000010 b9 a8 01 42 |...B|
00000014
(the above have a hack to embed a zero inside and check it's
returned correctly).
This is XSA-485 / CVE-2026-31786 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: fix stack buffer overflow in hci_le_big_create_sync
hci_le_big_create_sync() uses DEFINE_FLEX to allocate a
struct hci_cp_le_big_create_sync on the stack with room for 0x11 (17)
BIS entries. However, conn->num_bis can hold up to HCI_MAX_ISO_BIS (31)
entries — validated against ISO_MAX_NUM_BIS (0x1f) in the caller
hci_conn_big_create_sync(). When conn->num_bis is between 18 and 31,
the memcpy that copies conn->bis into cp->bis writes up to 14 bytes
past the stack buffer, corrupting adjacent stack memory.
This is trivially reproducible: binding an ISO socket with
bc_num_bis = ISO_MAX_NUM_BIS (31) and calling listen() will
eventually trigger hci_le_big_create_sync() from the HCI command
sync worker, causing a KASAN-detectable stack-out-of-bounds write:
BUG: KASAN: stack-out-of-bounds in hci_le_big_create_sync+0x256/0x3b0
Write of size 31 at addr ffffc90000487b48 by task kworker/u9:0/71
Fix this by changing the DEFINE_FLEX count from the incorrect 0x11 to
HCI_MAX_ISO_BIS, which matches the maximum number of BIS entries that
conn->bis can actually carry. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp: Don't attempt to copy CSR to userspace if PSP command failed
When retrieving the PEK CSR, don't attempt to copy the blob to userspace
if the firmware command failed. If the failure was due to an invalid
length, i.e. the userspace buffer+length was too small, copying the number
of bytes _firmware_ requires will overflow the kernel-allocated buffer and
leak data to userspace.
BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
Read of size 2084 at addr ffff898144612e20 by task syz.9.219/21405
CPU: 14 UID: 0 PID: 21405 Comm: syz.9.219 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025
Call Trace:
<TASK>
dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120
print_address_description ../mm/kasan/report.c:378 [inline]
print_report+0xbc/0x260 ../mm/kasan/report.c:482
kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595
check_region_inline ../mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200
instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
_inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
_copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
copy_to_user ../include/linux/uaccess.h:236 [inline]
sev_ioctl_do_pek_csr+0x31f/0x590 ../drivers/crypto/ccp/sev-dev.c:1872
sev_ioctl+0x3a4/0x490 ../drivers/crypto/ccp/sev-dev.c:2562
vfs_ioctl ../fs/ioctl.c:51 [inline]
__do_sys_ioctl ../fs/ioctl.c:597 [inline]
__se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583
do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
WARN if the driver says the command succeeded, but the firmware error code
says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any
firwmware error. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp: Don't attempt to copy PDH cert to userspace if PSP command failed
When retrieving the PDH cert, don't attempt to copy the blobs to userspace
if the firmware command failed. If the failure was due to an invalid
length, i.e. the userspace buffer+length was too small, copying the number
of bytes _firmware_ requires will overflow the kernel-allocated buffer and
leak data to userspace.
BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
Read of size 2084 at addr ffff8885c4ab8aa0 by task syz.0.186/21033
CPU: 51 UID: 0 PID: 21033 Comm: syz.0.186 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 34.84.12-0 11/17/2025
Call Trace:
<TASK>
dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120
print_address_description ../mm/kasan/report.c:378 [inline]
print_report+0xbc/0x260 ../mm/kasan/report.c:482
kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595
check_region_inline ../mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200
instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
_inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
_copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
copy_to_user ../include/linux/uaccess.h:236 [inline]
sev_ioctl_do_pdh_export+0x3d3/0x7c0 ../drivers/crypto/ccp/sev-dev.c:2347
sev_ioctl+0x2a2/0x490 ../drivers/crypto/ccp/sev-dev.c:2568
vfs_ioctl ../fs/ioctl.c:51 [inline]
__do_sys_ioctl ../fs/ioctl.c:597 [inline]
__se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583
do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
WARN if the driver says the command succeeded, but the firmware error code
says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any
firwmware error. |
| libmng through 2.0.3 contains a heap-based buffer overflow vulnerability in mng_read_ordr() that allows attackers to corrupt heap memory because ORDR entry buffers are sized by 5-byte on-wire records instead of 8-byte in-memory entries. Attackers can supply a crafted MNG file with MHDR, DHDR and a multi-record ORDR chunk to applications calling mng_read or mng_readdisplay, writing attacker-controlled data past the allocation and crashing the application. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp: Don't attempt to copy ID to userspace if PSP command failed
When retrieving the ID for the CPU, don't attempt to copy the ID blob to
userspace if the firmware command failed. If the failure was due to an
invalid length, i.e. the userspace buffer+length was too small, copying
the number of bytes _firmware_ requires will overflow the kernel-allocated
buffer and leak data to userspace.
BUG: KASAN: slab-out-of-bounds in instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
BUG: KASAN: slab-out-of-bounds in _inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
BUG: KASAN: slab-out-of-bounds in _copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
Read of size 64 at addr ffff8881867f5960 by task syz.0.906/24388
CPU: 130 UID: 0 PID: 24388 Comm: syz.0.906 Tainted: G U O 7.0.0-smp-DEV #28 PREEMPTLAZY
Tainted: [U]=USER, [O]=OOT_MODULE
Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025
Call Trace:
<TASK>
dump_stack_lvl+0xc5/0x110 ../lib/dump_stack.c:120
print_address_description ../mm/kasan/report.c:378 [inline]
print_report+0xbc/0x260 ../mm/kasan/report.c:482
kasan_report+0xa2/0xe0 ../mm/kasan/report.c:595
check_region_inline ../mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x264/0x2c0 ../mm/kasan/generic.c:200
instrument_copy_to_user ../include/linux/instrumented.h:129 [inline]
_inline_copy_to_user ../include/linux/uaccess.h:205 [inline]
_copy_to_user+0x66/0xa0 ../lib/usercopy.c:26
copy_to_user ../include/linux/uaccess.h:236 [inline]
sev_ioctl_do_get_id2+0x361/0x490 ../drivers/crypto/ccp/sev-dev.c:2222
sev_ioctl+0x25f/0x490 ../drivers/crypto/ccp/sev-dev.c:2575
vfs_ioctl ../fs/ioctl.c:51 [inline]
__do_sys_ioctl ../fs/ioctl.c:597 [inline]
__se_sys_ioctl+0x11d/0x1b0 ../fs/ioctl.c:583
do_syscall_x64 ../arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe0/0x800 ../arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
WARN if the driver says the command succeeded, but the firmware error code
says otherwise, as __sev_do_cmd_locked() is expected to return -EIO on any
firwmware error. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: br_nd_send: linearize skb before parsing ND options
br_nd_send() parses neighbour discovery options from ns->opt[] and
assumes that these options are in the linear part of request.
Its callers only guarantee that the ICMPv6 header and target address
are available, so the option area can still be non-linear. Parsing
ns->opt[] in that case can access data past the linear buffer.
Linearize request before option parsing and derive ns from the linear
network header. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_netem: fix out-of-bounds access in packet corruption
In netem_enqueue(), the packet corruption logic uses
get_random_u32_below(skb_headlen(skb)) to select an index for
modifying skb->data. When an AF_PACKET TX_RING sends fully non-linear
packets over an IPIP tunnel, skb_headlen(skb) evaluates to 0.
Passing 0 to get_random_u32_below() takes the variable-ceil slow path
which returns an unconstrained 32-bit random integer. Using this
unconstrained value as an offset into skb->data results in an
out-of-bounds memory access.
Fix this by verifying skb_headlen(skb) is non-zero before attempting
to corrupt the linear data area. Fully non-linear packets will silently
bypass the corruption logic. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix buffer overread in rxgk_do_verify_authenticator()
Fix rxgk_do_verify_authenticator() to check the buffer size before checking
the nonce. |
| In the Linux kernel, the following vulnerability has been resolved:
can: gw: fix OOB heap access in cgw_csum_crc8_rel()
cgw_csum_crc8_rel() correctly computes bounds-safe indices via calc_idx():
int from = calc_idx(crc8->from_idx, cf->len);
int to = calc_idx(crc8->to_idx, cf->len);
int res = calc_idx(crc8->result_idx, cf->len);
if (from < 0 || to < 0 || res < 0)
return;
However, the loop and the result write then use the raw s8 fields directly
instead of the computed variables:
for (i = crc8->from_idx; ...) /* BUG: raw negative index */
cf->data[crc8->result_idx] = ...; /* BUG: raw negative index */
With from_idx = to_idx = result_idx = -64 on a 64-byte CAN FD frame,
calc_idx(-64, 64) = 0 so the guard passes, but the loop iterates with
i = -64, reading cf->data[-64], and the write goes to cf->data[-64].
This write might end up to 56 (7.0-rc) or 40 (<= 6.19) bytes before the
start of the canfd_frame on the heap.
The companion function cgw_csum_xor_rel() uses `from`/`to`/`res`
correctly throughout; fix cgw_csum_crc8_rel() to match.
Confirmed with KASAN on linux-7.0-rc2:
BUG: KASAN: slab-out-of-bounds in cgw_csum_crc8_rel+0x515/0x5b0
Read of size 1 at addr ffff8880076619c8 by task poc_cgw_oob/62
To configure the can-gw crc8 checksums CAP_NET_ADMIN is needed. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix heap overflow in NFSv4.0 LOCK replay cache
The NFSv4.0 replay cache uses a fixed 112-byte inline buffer
(rp_ibuf[NFSD4_REPLAY_ISIZE]) to store encoded operation responses.
This size was calculated based on OPEN responses and does not account
for LOCK denied responses, which include the conflicting lock owner as
a variable-length field up to 1024 bytes (NFS4_OPAQUE_LIMIT).
When a LOCK operation is denied due to a conflict with an existing lock
that has a large owner, nfsd4_encode_operation() copies the full encoded
response into the undersized replay buffer via read_bytes_from_xdr_buf()
with no bounds check. This results in a slab-out-of-bounds write of up
to 944 bytes past the end of the buffer, corrupting adjacent heap memory.
This can be triggered remotely by an unauthenticated attacker with two
cooperating NFSv4.0 clients: one sets a lock with a large owner string,
then the other requests a conflicting lock to provoke the denial.
We could fix this by increasing NFSD4_REPLAY_ISIZE to allow for a full
opaque, but that would increase the size of every stateowner, when most
lockowners are not that large.
Instead, fix this by checking the encoded response length against
NFSD4_REPLAY_ISIZE before copying into the replay buffer. If the
response is too large, set rp_buflen to 0 to skip caching the replay
payload. The status is still cached, and the client already received the
correct response on the original request. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: bpf: prevent buffer overflow in hid_hw_request
right now the returned value is considered to be always valid. However,
when playing with HID-BPF, the return value can be arbitrary big,
because it's the return value of dispatch_hid_bpf_raw_requests(), which
calls the struct_ops and we have no guarantees that the value makes
sense. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/umad: Reject negative data_len in ib_umad_write
ib_umad_write computes data_len from user-controlled count and the
MAD header sizes. With a mismatched user MAD header size and RMPP
header length, data_len can become negative and reach ib_create_send_mad().
This can make the padding calculation exceed the segment size and trigger
an out-of-bounds memset in alloc_send_rmpp_list().
Add an explicit check to reject negative data_len before creating the
send buffer.
KASAN splat:
[ 211.363464] BUG: KASAN: slab-out-of-bounds in ib_create_send_mad+0xa01/0x11b0
[ 211.364077] Write of size 220 at addr ffff88800c3fa1f8 by task spray_thread/102
[ 211.365867] ib_create_send_mad+0xa01/0x11b0
[ 211.365887] ib_umad_write+0x853/0x1c80 |
| In the Linux kernel, the following vulnerability has been resolved:
net: wwan: t7xx: fix potential skb->frags overflow in RX path
When receiving data in the DPMAIF RX path,
the t7xx_dpmaif_set_frag_to_skb() function adds
page fragments to an skb without checking if the number of
fragments has exceeded MAX_SKB_FRAGS. This could lead to a buffer overflow
in skb_shinfo(skb)->frags[] array, corrupting adjacent memory and
potentially causing kernel crashes or other undefined behavior.
This issue was identified through static code analysis by comparing with a
similar vulnerability fixed in the mt76 driver commit b102f0c522cf ("mt76:
fix array overflow on receiving too many fragments for a packet").
The vulnerability could be triggered if the modem firmware sends packets
with excessive fragments. While under normal protocol conditions (MTU 3080
bytes, BAT buffer 3584 bytes),
a single packet should not require additional
fragments, the kernel should not blindly trust firmware behavior.
Malicious, buggy, or compromised firmware could potentially craft packets
with more fragments than the kernel expects.
Fix this by adding a bounds check before calling skb_add_rx_frag() to
ensure nr_frags does not exceed MAX_SKB_FRAGS.
The check must be performed before unmapping to avoid a page leak
and double DMA unmap during device teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: add bounds checks in nvmet_tcp_build_pdu_iovec
nvmet_tcp_build_pdu_iovec() could walk past cmd->req.sg when a PDU
length or offset exceeds sg_cnt and then use bogus sg->length/offset
values, leading to _copy_to_iter() GPF/KASAN. Guard sg_idx, remaining
entries, and sg->length/offset before building the bvec. |
| BentoML through 1.4.39 contains a Dockerfile instruction injection vulnerability that allows attackers to add arbitrary build instructions by embedding newlines in docker.env mapping keys rendered by the legacy base.j2 template. Attackers can supply a crafted bentofile.yaml or imported bento archive so that bentoml containerize executes injected RUN instructions during docker build, accessing build secrets and poisoning images. |
