| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: add missing ref_tracker_dir_exit() to alloc_netdev_mqs()
sashiko is reporting that trying to read /sys/kernel/debug/ref_tracker/*
causes use-afer-free crash when either alloc_percpu() or dev_addr_init()
in alloc_netdev_mqs() failed, for commit 4d92b95ff2f9 ("net: add net device
refcount tracker infrastructure") added ref_tracker_dir_exit() to only
free_netdev() path. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: mtpav: shut down output timer before card teardown
snd_mtpav_output_timer() rearms chip->timer while holding
chip->spinlock and accesses the card-private mtpav state.
snd_mtpav_free() currently takes the same lock and calls
timer_delete() when the timer is active. This only removes a
pending timer; it does not wait for a callback that is already
running and does not prevent the callback from rearming the timer.
A callback running on another CPU can therefore continue after
snd_mtpav_free() releases the lock and access the card-private
state while the card is being torn down. It can also rearm the
timer after timer_delete() has returned.
Call timer_shutdown_sync() without holding chip->spinlock. This
waits for any running callback to finish and prevents further
rearming before the card-private mtpav state is released. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6mr: do not clone dst in ip6mr_cache_report()
IPv6 input attaches a non-refcounted (NOREF) dst to skbs under RCU.
When an ingress multicast packet misses MFC lookup,
ip6mr_cache_unresolved() places the skb onto the unresolved queue,
escaping the receive-side RCU grace period.
If the underlying route is deleted and freed, and the MFC queue is later
resolved with a wrong parent interface, ip6_mr_forward() invokes
ip6mr_cache_report(..., MRT6MSG_WRONGMIF), which executes
dst_clone(skb_dst(pkt)) on the freed dst entry, triggering a slab
use-after-free.
Report packets queued to mroute6_sk (a raw socket) and netlink
notifications do not require an attached dst entry.
Fix this by:
1. Removing dst_clone() in ip6mr_cache_report() and ensuring report skbs
do not hold a dst.
2. Dropping skb_dst before queuing unresolved skbs in
ip6mr_cache_unresolved(), matching the fact that multicast
forwarding resolves outgoing routes anew via ip6_route_output(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: access chan->conn safely in get/setsockopt
Since commit b66774b48dd9 ("Bluetooth: L2CAP: Fix UAF in channel timeout by holding conn ref")
l2cap_chan::conn has held reference and remains non-NULL also after the
corresponding hci_conn is deleted. In this state accessing various
fields eg. hci_conn::hdev is invalid, which leads to KASAN crash in
l2cap_sock_setsockopt() access of conn->hcon->hdev.
Check l2cap_chan::conn.hcon corresponds to an alive hci_conn before
trying to use it in l2cap_sock.c. Hold l2cap_chan_lock() in
getsockopt/setsockopt to ensure it stays alive, and to avoid data races
in l2cap_chan fields. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: gadget: ffs: fix mm lifetime handling
io_data stores a pointer to the submitting task's mm_struct,
but does not currently hold a reference to it while async
requests are pending.
This can result in a use-after-free if the task exits before
completion handling finishes.
Take a reference with mmgrab() when queuing the read request
and release it with mmdrop() on request completion. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: Fix Use-After-Free in AIO error path
In ffs_epfile_write_iter() and ffs_epfile_read_iter(), when ffs_epfile_io()
fails with an error other than -EIOCBQUEUED, the io_data structure (`p`) is
freed. However, for AIO operations, the kiocb cancel function was already
armed and kiocb->private was set to `p`.
If a concurrent cancel operation (such as sys_io_cancel()) executes after
ffs_epfile_io() fails but before the function frees `p`, a Use-After-Free
can occur when the cancellation handler accesses the freed pointer.
To securely fix this race condition, we must properly un-arm the
cancellation. Invoking `kiocb->ki_complete()` does exactly this by
acquiring `ctx->ctx_lock` and safely removing the kiocb from the active
sequence. In doing so, it ensures that a parallel io_cancel can no longer
discover the kiocb, effectively closing the race window.
We then return -EIOCBQUEUED to notify the VFS layer that the kiocb has been
consumed and it should avoid attempting to complete the request again or
triggering subsequent completion handlers. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: sony: clean up device list on probe failure
sony_input_configured() adds some controllers to sony_device_list before
HID core registers their input devices. input_register_device() can fail
after the callback returns successfully. sony_probe() then observes that
HID_CLAIMED_INPUT is clear and unwinds, but only stops the HID hardware.
The devres-managed sony_sc is freed while its list node remains linked, so
the next matching controller traverses freed memory.
Initialize the list node and device ID to inactive states. Make list
removal idempotent and run the driver-private cleanup on every probe
failure path. This also makes a second cleanup safe when
sony_input_configured() already unwound a partial initialization before
sony_probe() handles the missing input claim.
Found by 0sec (https://0sec.ai) using automated source analysis;
verified against the HID input registration and probe unwind paths. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Prevent client use-after-free during close_lru reaping
An nfs4_openowner left on nn->close_lru after its final CLOSE keeps
its last closed stateid in oo_last_closed_stid, holding only a raw
pointer to its nfs4_client. The laundromat reaps timed-out entries,
drops nn->client_lock, and calls nfs4_put_stid(), which dereferences
the client through cl_lock. Nothing pins the client across that
window, so a concurrent force_expire_client() can free it and
nfs4_put_stid() reads freed memory. __destroy_client() hits the same
race, walking clp->cl_openowners without cl_lock.
Pin the client with cl_rpc_users before dropping client_lock, and
skip clients already expiring. __destroy_client() then cleans up its
own close_lru entries through release_last_closed_stateid(), so
teardown no longer races the laundromat. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: clear forceRM when issuing EndTransfer
The forceRM bit of the DEPCMD register controls the behavior of the
EndTransfer command used to stop an active transfer. Older DWC3
programming guide revisions recommended setting forceRM=1 when
issuing EndTransfer. Newer programming guide revisions recommend
issuing EndTransfer with forceRM cleared.
With forceRM=1 on DWC_usb31 v2.00a and v2.10a controllers, a transfer
aborted through the ep_dequeue path was observed to remain active
after EndTransfer completion. A subsequent StartTransfer issued on the
same endpoint triggered writes associated with the aborted transfer.
This resulted in an SMMU fault because the transfer buffer had already
been unmapped during EndTransfer command-completion cleanup.
Using forceRM=0 eliminates the issue. Although older DWC3 programming
guide revisions recommended setting forceRM=1, no issues are known
from using forceRM=0. Clear forceRM when issuing EndTransfer to provide
consistent EndTransfer behavior and align with newer programming guide
recommendations. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: storage: realtek_cr: fix use-after-free on disconnect
realtek_cr_destructor() calls timer_delete() before the chip containing
the timer is freed. The timer callback may still be running and can
rearm itself, resulting in a use-after-free.
Use timer_shutdown_sync() to wait for the callback and prevent further
rearming. Do this unconditionally because ss_en may be changed after
the timer is armed.
Move timer_setup() into init_realtek_cr() so the timer is initialized
before any failure path can invoke the destructor.
Found by static analysis. |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Take trace_array reference before accessing its ftrace_ops
The trace instance files set_ftrace_filter and set_ftrace_notrace was
updated to work with specific trace instances (trace_arrays). The issue is
that when these files are opened, there is a small race window where it
will use the ftrace_ops from the inode->private pointer to get a reference
to the trace_array and then take its reference. The problem is that the
ftrace_ops itself could be freed. If the rmdir on the instance happens at
the same time the set_ftrace_filter file is opened, the rmdir could have
also freed the ftrace_ops and referencing it will cause a use-after-free
bug and crash the kernel.
Instead, pass in the trace_array as the file private data (NULL for the
top level instance), and then pass both the trace_array and the ftrace_ops
to the ftrace_regex_open() function. If the trace_array is NULL, then it
just uses the ftrace_ops without the need to take its reference (like
normal). If the ftrace_ops is NULL, that is only the case for the top
level instance and the global_ops can be used.
This allows the trace_array to have its reference incremented before
touching the ftrace_ops that could also be freed when the instance is. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: add missing SRCU grace period in error path
nvme_alloc_ns() error path at out_unlink_ns removes ns from the
namespace head siblings list with list_del_rcu(&ns->siblings) but
does not wait for SRCU readers before freeing the namespace struct.
Multipath code iterates the head->list under srcu_read_lock() in
nvme_find_path() and nvme_mpath_revalidate_paths(), so a concurrent
reader can still hold a reference to ns when kfree(ns) runs.
The normal removal path in nvme_ns_remove() correctly calls
synchronize_srcu(&ns->head->srcu) after list_del_rcu() to wait for
in-progress readers. Add the same grace period in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio-ap: Fix missing lock required to access list of ap_matrix_mdev objects
In order to traverse or add/remove ap_matrix_mdev objects in the
matrix_dev->mdev_list, the matrix_dev->guests_lock mutex must be held.
There are two functions that access the list without holding the mutex:
vfio_ap_mdev_probe function
~~~~~~~~~~~~~~~~~~~~~~~~~~~
The vfio_ap_mdev_probe function uses the matrix_dev->mdevs_lock
mutex to guard the add of a newly created ap_matrix_mdev object to the
matrix_dev->mdev_list. This mutex does not protect list access; its purpose
is to guard against concurrent access to fields contained in an
ap_matrix_mdev object. This could lead to kernel memory corruption or
use-after-free if another mdev is created or removed concurrently.
The adding of an ap_matrix_mdev object to matrix_dev->mdev_list
is now guarded by the matrix_dev->guests_lock which is the correct
way to protect against concurrent mdev_list access.
Also removed the following two lines of code because the matrix_mdev is
allocated via vfio_alloc_device macro which uses kzalloc, so req_trigger
and cfg_chg_trigger are already zero-initialised when the struct is
allocated before the call to vfio_register_emulated_iommu_dev. This
prevents a window whereby these triggers are set to NULL after
the device is exposed to userspace.
matrix_mdev->req_trigger = NULL;
matrix_mdev->cfg_chg_trigger = NULL;
vfio_ap_mdev_for_queue function
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The status_show function that supports display of the status attribute of
the devices in /sys/bus/ap/devices calls the vfio_ap_mdev_for_queue
function which iterates the matrix_dev->mdev_list to find the object
representing the queue device whose status is to be displayed. In order to
traverse this list, the matrix_dev->guests_lock mutex must be held.
To fix this, the guests_lock mutex is taken prior to taking the
matrix_dev->mdevs_lock mutex in the status_show function. It is taken
there rather than the vfio_ap_mdev_for_queue function - where it is
needed - because it must be taken prior to the mdevs_lock mutex in order to
adhere to the proper locking order and prevent a lockdep splat; also
because the mdevs_lock is needed there to access fields within
the matrix_mdev object in that function.
See the vfio-ap-locking.rst in the linux kernel tree. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic-v3: take an LPI reference in vgic_v3_save_pending_tables
vgic_v3_save_pending_tables() iterates dist->lpi_xa using xa_for_each()
and dereferences the returned struct vgic_irq in the loop body without
holding a reference on the LPI.
The xarray iterator only provides temporary RCU coverage while looking up
the current entry. That is not sufficient for this loop body, which reads
fields from struct vgic_irq and performs guest memory accesses before the
iteration completes.
A concurrent path can trigger this race: the irqfd cached injection path
(vgic_its_inject_cached_translation) obtains a transient LPI reference
via vgic_its_check_cache() without holding kvm->lock, vcpu->mutex,
config_lock, or its_lock. If guest ITS DISCARD then drops the cache and
ITE references under its_lock, the transient inject reference may become
the final one. When vgic_put_irq() drops it, the LPI is erased from
lpi_xa and freed via kfree_rcu(). Meanwhile, vgic_v3_save_pending_tables()
may still hold a stale pointer obtained from the xarray iterator and
dereference it after the RCU grace period completes.
Fix this by re-fetching each iterated LPI via vgic_get_irq(), which takes
a stable reference, and dropping it with vgic_put_irq() on all paths.
This matches the pattern already used by other lpi_xa iterators in the
vgic ITS code. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Add TLB flush after MES queue eviction/suspension
MES (Micro Engine Scheduler) does not perform heavy-weight TLB
invalidation after unmapping queues, unlike HWS which does this
automatically. This causes a race condition where in-flight DMA
descriptors can access memory that has been unmapped, leading to page
faults and GPU queue hangs during SVM page migration.
The issue manifests as KFDSVMRangeTest.MultiThreadMigrationTest
failures on gfx1151 (Strix Point) with XNACK mode 1 enabled - the GPU
compute queue hangs with packets submitted but never consumed.
Add kfd_flush_tlb() calls after MES queue removal in two locations:
- evict_process_queues_cpsch(): after all queues removed during eviction
- suspend_queues(): after debug/criu queue suspension (with mem_fence barrier)
This ensures all in-flight memory accesses from unmapped queues are
flushed before memory is freed or migrated.
(cherry picked from commit f5c4f88e0f9c45a8fb9dfac0c1df726c95e41b77) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix error path at svm_migrate_copy_to_ram
If page migration from device to sys ram fails for some reasons driver needs
release and unlock allocated system pages. To do that driver should use page
physical address, or pfn, then get struct page*. Current driver uses dma
address(for adev) that is not correct with IOMMU enabled, or even in general.
The patch releases and unlocks allocated system pages based on where migration
failed by struct page* of sys ram pages. Also dma_unmap correspodent system
ram pages at error path. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: unsubscribe the channel-kill event before the fence context
nouveau_channel_del() tears the fence context down first and only drops
the channel-kill subscription later, in the middle of the nvif object
teardown:
if (chan->fence)
nouveau_fence(chan->cli->drm)->context_del(chan);
...
nvif_object_dtor(&chan->vram);
nvif_event_dtor(&chan->kill);
The subscribed handler is nouveau_channel_killed(), which calls
nouveau_channel_kill() and from there nouveau_fence_context_kill() on
chan->fence. A kill event delivered in that window takes fctx->lock and
walks fctx->pending on a fence context that context_del() has already
freed.
Nothing reaches this below Fermi today, because the subscription is
gated on FERMI_CHANNEL_GPFIFO and nothing kills a channel there. On
Fermi and newer the window is real but narrow, since a kill has to land
exactly while the channel is being destroyed. That is reason enough on
its own, which is why this carries a Fixes: tag. The last patch in this
series subscribes Tesla channels as well; nothing kills those today, so
it does not widen the exposure now, but it is the groundwork for a
recovery path that would, and the ordering is better fixed before that
lands than alongside it.
Drop the subscription before anything it depends on is torn down. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix tree connection use-after-free in smb2_tree_connect()
ksmbd_tree_conn_connect() publishes a new tree connection in
sess->tree_conns with a single reference and returns its pointer to
smb2_tree_connect(). The handler continues to initialize the object and
build the response after publication. A concurrent session logoff can
erase the connection and drop that reference, freeing the object while
the handler still uses it.
BUG: KASAN: slab-use-after-free in smb2_tree_connect+0xe3d/0xf90
smb2_tree_connect (fs/smb/server/smb2pdu.c:2872)
handle_ksmbd_work
process_one_work
worker_thread
kthread
After xa_store() succeeds, take a second reference before releasing
tree_conns_lock. The original reference belongs to the xarray entry and
the second belongs to the creating smb2_tree_connect() handler.
Keep the references balanced in every path:
- On normal exit or an error after publication, smb2_tree_connect()
drops its creator reference. Error cleanup also calls
ksmbd_tree_conn_disconnect(), which drops the xarray reference only if
it removes the exact entry.
- SMB2 TREE_DISCONNECT uses the same helper to remove the entry and drop
its xarray reference. The request's existing lookup reference remains
owned by the request and is released by the existing cleanup.
- Session LOGOFF removes each entry and drops its xarray reference. If
it wins the race, later cleanup sees that the entry is gone and does
not drop that reference again.
To enforce this ownership, claim the disconnected state and erase the
exact entry atomically under tree_conns_lock. This guarantees one drop
for the xarray reference and one drop by each in-flight user, regardless
of which teardown path wins. If logoff removes the entry before
initialization completes, fail the connect instead of marking the
detached object TREE_CONNECTED. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: pca953x: fix pca953x_irq_bus_sync_unlock regmap lock
Locking is disabled in the regmap config as this driver uses its own
lock. This means that all calls to regmap functions (read or write) must
hold the i2c_lock. The function pca953x_irq_bus_sync_unlock() did not do
this, and it was therefore possible that multiple threads could cause an
incorrect register to be read/written.
A previous patch partly fixed this, but only protected the write to the
interrupt mask register, and not the read from the direction register. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: oss: Fix UAF at handling events with embedded SysEx data
The OSS sequencer processes the input MIDI bytes into a sequencer
event to be dispatched later (in snd_seq_oss_midi_putc() called from
snd_seq_oss_process_event()). When it's a SysEx data, the event
record contains data.ext.ptr pointer to the original SysEx bytes, and
the referred data is copied into the pool afterwards at dispatching.
The problem is that, if the sequencer port gets closed concurrently
before the dispatch, the OSS sequencer core also releases the
resources (in snd_seq_oss_midi_check_exit_port()), while the pending
event may hold a stale pointer, eventually leading to a UAF at a later
dispatch.
Fortunately, there is already a refcounting mechanism (snd_use_lock_t)
for the OSS MIDI device access, and for addressing the issue above, we
just need to extend the refcount until the event gets dispatched.
This patch extends snd_seq_oss_process_event() to give back the
refcount object, which is in turn released after calling the sequencer
dispatcher with the given event in the caller side.
According to the original report, KASAN report as below:
KASAN slab-use-after-free in snd_seq_event_dup+0x40c/0x470
RIP: 0033:0x7f2cb66a6340
Read of size 6
Call trace:
dump_stack_lvl+0x73/0xb0 (?:?)
print_report+0xd1/0x650 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x1a7/0x340 (?:?)
kasan_complete_mode_report_info+0x64/0x200 (?:?)
kasan_report+0xf7/0x130 (?:?)
snd_seq_event_dup+0x40c/0x470 (?:?)
kasan_check_range+0x10c/0x1c0 (?:?)
__asan_memcpy+0x27/0x70 (?:?)
snd_seq_event_dup+0x9/0x470 (?:?)
snd_seq_client_enqueue_event+0x139/0x240 (?:?)
_raw_spin_unlock_irqrestore+0x4b/0x60 (?:?)
snd_seq_kernel_client_enqueue+0x102/0x120 (?:?)
snd_seq_oss_write+0x416/0x4e0 (?:?)
apparmor_file_permission+0x20/0x30 (?:?)
odev_write+0x3b/0x60 (?:?)
vfs_write+0x1ce/0x850 (?:?)
lock_release+0xc8/0x2a0 (?:?)
__kasan_check_write+0x18/0x20 (?:?)
__mutex_unlock_slowpath+0x129/0x510 (?:?)
ksys_write+0xe1/0x180 (?:?)
mutex_unlock+0x16/0x20 (?:?)
odev_ioctl+0x65/0xc0 (?:?)
__x64_sys_write+0x46/0x60 (?:?)
x64_sys_call+0x7d/0x20d0 (?:?)
do_syscall_64+0xc1/0x360 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) |
