| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa_sim_blk: reject out-of-range sector starts
vdpasim_blk_check_range() logs an invalid start sector but continues
validating the request. The subsequent unsigned capacity subtraction can
underflow and let an out-of-range buffer offset reach the data path.
The invalid offset is used by three request paths. VIRTIO_BLK_T_OUT
copies guest data to blk->buffer + offset through
vringh_iov_pull_iotlb(), causing an out-of-bounds write in
_copy_from_iter() or memcpy(). VIRTIO_BLK_T_IN copies from
blk->buffer + offset to the guest through vringh_iov_push_iotlb(),
causing an out-of-bounds read in _copy_to_iter().
VIRTIO_BLK_T_WRITE_ZEROES passes blk->buffer + offset to memset(),
causing an out-of-bounds write.
Reject starts at or beyond the capacity before the subtraction. Treat the
capacity boundary as invalid because the IN and OUT paths round byte counts
down to sectors for validation but later copy the original byte counts. A
sub-sector request at the capacity boundary would otherwise still access
past the end of the buffer.
I found this bug myself, though the patch was written with AI assistance. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: syncookies: remember the request backup flag
Instead of using an uninitialised bit when copying the info in
subflow_ulp_clone().
To fix this, no need to extend the join_entry structure: backup is
coming from struct mptcp_subflow_request_sock, only one bit. Do the same
here by using one bit for both. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: validate IEs in cfg80211_wext_siwgenie()
The KASAN allocation trace shows that a malformed IE buffer is
stored via SIOCSIWGENIE (cfg80211_wext_siwgenie()) without any
validation. The crash trace shows that a subsequent SIOCSIWESSID
triggers a connection attempt which calls cfg80211_sme_get_conn_ies()
to process the stored IE buffer, causing:
- An out-of-bounds read in skip_ie() which reads ies[pos+1]
(the length byte) past the end of the 1-byte buffer.
- An integer underflow in the memcpy size argument when offs
returned by ieee80211_ie_split() exceeds ies_len, causing
unsigned subtraction to wrap to SIZE_MAX and triggering a
fortify panic.
Fix this by validating the IE buffer in cfg80211_wext_siwgenie()
before storing it.
[drop unnecessary ie_len check, update commit message] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: validate skb length in rfcomm_recv_frame
rfcomm_recv_frame() casts skb->data to struct rfcomm_hdr and dereferences
hdr->addr and hdr->ctrl without validating skb->len first. A truncated
frame with skb->len less than the minimum header size causes an
out-of-bounds read of uninitialized memory. Additionally, a zero-length
frame causes skb->len-- to underflow to UINT_MAX, making
skb_tail_pointer() read far past the buffer.
Commit 23882b828c3c ("Bluetooth: RFCOMM: validate skb length in MCC
handlers") fixed the same class of missing-length-check bugs in the MCC
sub-handlers, but the top-level rfcomm_recv_frame() was left unfixed.
KMSAN reports:
BUG: KMSAN: uninit-value in rfcomm_run
...
Uninit was created at:
__alloc_skb+0x474/0xb60
vhci_write+0xe9/0x870
Fix this by rejecting frames smaller than sizeof(struct rfcomm_hdr) + 1
(the minimum frame must have a 3-byte header and a 1-byte FCS). |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: ipmb: validate write message length
ipmb_write() read message fields before validating the length byte.
A zero or short write can read uninitialized stack bytes.
A length smaller than the SMBus header underflows the block write length.
Require a non-empty buffer and the minimum IPMB request length.
Also require the length byte plus payload before parsing the message. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/pm/powerplay: bounds-check voltage index in Vega10 lookup
vddInd, vddciInd and mvddInd from VBIOS-parsed tables index into vddc,
vddci and vddmem lookup tables without bounds checks across nine sites.
Return -EINVAL when any index is out of range. |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: prevent out-of-bounds read in super root block parsing
super-root inode metadata size is trusted before nilfs_read_inode_common().
Reject super-root inode sizes whose computed on-disk footprint exceeds the
filesystem block size. This prevents malformed filesystem images from
making nilfs_read_inode_common() read past the end of the super-root block.
[ryusuke: clarify the commit title] |
| In the Linux kernel, the following vulnerability has been resolved:
perf: arm_pmuv3: Zero initialize hw_id branch stack field
PERF_SAMPLE_BRANCH_HW_INDEX is supported by BRBE so hw_id is passed to
userspace, but it's never set by the BRBE driver. Zero initialize it as
it should be according to the docs:
* For the architectures whose raw branch records are
* already stored in age order, the hw_idx should be 0.
It's probably too risky to remove PERF_SAMPLE_BRANCH_HW_INDEX from BRBE
now in case anyone is setting it and reading the value, but zero
initializing the whole struct also protects against the same issue with
new fields that are added in the future. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: avoid userspace overflow on invalid optlen
nfc_llcp_getsockopt() casts optval to (u32 __user *) for put_user(), so
the kernel always stores 4 bytes regardless of the caller-supplied
optlen. The existing min_t(u32, len, sizeof(u32)) only clamps the length
reported back to userspace; it does not constrain the store. A call with
optlen < 4 therefore writes past the user buffer, violating the
getsockopt(2) contract for all five supported optnames.
Reject any call with optlen < sizeof(u32) up front. 'len' is int, so a
plain size comparison would promote a negative optlen to size_t and slip
past the check; an explicit 'len < 0' test is added first to catch
negative values before the size compare. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: fix out-of-bounds link array access in mt7996_tx()
When mac80211 leaves the link unspecified, mt7996_tx() substitutes the
primary link id of the station or vif. That value is
IEEE80211_LINK_UNSPECIFIED (0xf) until the first link has been added,
and it is then used unchecked to index vif->link_conf[],
mvif->mt76.link[] and sta->link[], all of which hold
IEEE80211_MLD_MAX_NUM_LINKS (15) entries.
Clamp the primary link id to the default link before using it, and use
the clamped value for the link_sta fallback as well. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: fix counter type in iwl_fwrt_dump_error_logs
The loop counter 'count' was declared as u8 while num_pc is u32.
If firmware advertises more than 255 PC entries the counter wraps
back to zero and the loop never terminates potentially causing an
infinite loop or reading past the allocated pc_data array.
Change the declaration to u32 to match num_pc. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: haptic: don't write an uninitialized value to unhandled usages
fill_effect_buf() initializes value only for the four haptic usages
handled by its switch, but writes it to field->value[] for every usage.
An unhandled usage can therefore receive either an uninitialized value
or one left over from the previous usage. hid_output_report() then
serializes that value into the effect's report buffer.
Skip unhandled usages instead. This also matches switch_mode(), which
only updates fields it recognizes.
Found with Clang's -Wconditional-uninitialized. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Reserve a terminator byte for the login payload
iscsi_target_check_login_request() rejects a login PDU whose
DataSegmentLength exceeds MAX_KEY_VALUE_PAIRS, but the test is '>' and
login->req_buf is allocated with exactly MAX_KEY_VALUE_PAIRS
bytes. Since iscsit_get_login_rx() receives payload_length + padding
bytes, where
padding = ((-payload_length) & 3);
any payload_length from 8189 to 8192 fills the whole 8192 byte
buffer. The write stays in bounds, but no byte is left for a NUL
terminator.
The buffer is subsequently consumed as a C string. In the CHAP path
chap_check_algorithm() calls kstrdup(a_str), and extract_param() calls
strstr(in_buf, pattern) followed by strlen_semi(), none of which take a
length. convert_null_to_semi() additionally rewrites every embedded NUL
to ';', so even a payload made of well formed NUL separated key=value
records is left without a terminator. These walk past the end of the
object into adjacent slab memory. It is reachable by an unauthenticated
initiator against a portal configured for CHAP; when authentication is
not required iscsi_login_zero_tsih_s2() rewrites AuthMethod to None and
the CHAP path is never entered.
Allocate one extra byte. kzalloc() zeroes it and nothing ever writes to
it, as every writer copies to offset 0 for at most MAX_KEY_VALUE_PAIRS
bytes, so the buffer is always terminated. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB read in rtw_action_frame_parse()
rtw_action_frame_parse() takes a frame_len parameter but never
actually checks it before indexing into the frame body:
const u8 *frame_body = frame + sizeof(struct ieee80211_hdr_3addr);
...
c = frame_body[0];
...
a = frame_body[1];
frame_body already points 24 bytes (sizeof(struct
ieee80211_hdr_3addr)) into frame, so reading frame_body[0] and
frame_body[1] requires frame_len >= 26. A management action frame
shorter than that (e.g. exactly 24 bytes, the minimum a malicious
peer can send) causes a 1-2 byte out-of-bounds read.
This is reachable from rtw_cfg80211_monitor_if_xmit_entry() and
cfg80211_rtw_mgmt_tx() in ioctl_cfg80211.c, both of which pass
attacker/user-influenced frame buffers and lengths straight through.
Add the missing length check before frame_body is dereferenced. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: fix uninit-value in the RF discover/activated NTF handlers
nci_rf_discover_ntf_packet() and nci_rf_intf_activated_ntf_packet() each
parse a notification into an on-stack struct (nci_rf_discover_ntf /
nci_rf_intf_activated_ntf) that is not initialised. The RF
technology-specific parameters are only extracted when
rf_tech_specific_params_len is non-zero, so a notification that reports a
zero length leaves the rf_tech_specific_params union uninitialised - and
both handlers then pass it to nci_add_new_protocol(), which reads it:
- discover: nci_add_new_target() -> nci_add_new_protocol();
- activated: nci_target_auto_activated() -> nci_add_new_protocol().
nci_add_new_protocol() uses nfca_poll->nfcid1_len as both a branch
condition and a memcpy() length and copies nfcid1/sens_res/sel_res into
ndev->targets, which is later exposed to user space via NFC_CMD_GET_TARGET.
BUG: KMSAN: uninit-value in nci_add_new_protocol+0x624/0x6c0
nci_add_new_protocol+0x624/0x6c0
nci_ntf_packet+0x25b2/0x3c30
nci_rx_work+0x318/0x5d0
process_scheduled_works+0x84b/0x17a0
worker_thread+0xc10/0x11b0
kthread+0x376/0x500
Local variable ntf.i created at:
nci_ntf_packet+0xbc2/0x3c30
Zero-initialise both on-stack notifications so the union reads back as
zero when no technology-specific parameters are present. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: xilinx-trng - Remove crypto_rng interface
Implementing the crypto_rng interface has no purpose, as it isn't used
in practice. It's being removed from other drivers too. Just remove
it. This leaves hwrng, which is actually used.
Tagging with 'Cc stable' due to the bugs that this removes:
- xtrng_trng_generate() sometimes returned success even when it didn't
fill in all the bytes.
- It was possible for xtrng_trng_generate() and
xtrng_hwrng_trng_read() to run concurrently and interfere with each
other, as the locking code in xtrng_hwrng_trng_read() was broken. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: dts: renesas: ironhide: Describe inline ECC carveouts
The DBSC5 DRAM controller protects DRAM content using inline ECC.
The inline ECC utilizes areas of DRAM for its operation, which are
in the DRAM address range, but must not be accessed or modified.
Describe the inline ECC carveout areas used by the DBSC5 controller
on this hardware as reserved-memory, which must not be accessed.
Include DRAM areas which are unprotected by ECC as well, those are
parts of the DRAM which directly precede the ECC carveout.
In case of high DRAM utilization, unless the inline ECC carveouts
are properly reserved, Linux may use and corrupt the memory used
by the DBSC5 DRAM controller for inline ECC, which would lead to
the system becoming unstable. |
| In the Linux kernel, the following vulnerability has been resolved:
tls: device: fix out-of-bounds write in tls_append_frag()
Found with syzkaller and a local syzbot instance running on top of a
netdevsim TLS offload emulation; tls_device.c is otherwise only reachable
on a machine with a NIC that implements the offload.
tls_push_data() only checks whether the open record still has room for
another frag at the bottom of its loop, and the MSG_MORE early break
skips that check. The record survives to the next syscall with the frag
count it already had, and tls_append_frag() does not check either, so
with TLS_TX_ZEROCOPY_RO every splice(SPLICE_F_MORE) of a byte or two adds
a non-coalescing pipe page and num_frags walks off the end of
tls_record_info.frags[MAX_SKB_FRAGS]. Once the record is pushed,
tls_push_record() runs the same index over sg_tx_data[MAX_SKB_FRAGS] and
the sg_set_page() writes land on the destruct_work that follows it, which
the workqueue then calls.
The byte limit is fine because copy drops to 0 and the loop falls through
to the same check; the frag count has no such feedback.
Push the record rather than keep a full one open, which is what a plain
TCP socket does - tcp_sendmsg_locked() uses tcp_mark_push() and
new_segment in both the copy and the MSG_SPLICE_PAGES paths, and tls_sw
already sets full_record when the sk_msg ring fills up, MSG_MORE or not.
BUG: KASAN: slab-out-of-bounds in tls_append_frag ( net/tls/tls_device.c:269)
Write of size 8 at addr ffff8881104d1530 by task tls_oob/450
CPU: 2 UID: 0 PID: 450 Comm: tls_oob Not tainted 7.2.0-rc7+ #329 PREEMPT
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
tls_append_frag (net/tls/tls_device.c:269)
tls_push_data (net/tls/tls_device.c:518)
tls_device_sendmsg (net/tls/tls_device.c:583)
inet_sendmsg (net/ipv4/af_inet.c:865)
sock_sendmsg (net/socket.c:775 net/socket.c:790 net/socket.c:813)
splice_to_socket (fs/splice.c:884)
do_splice (fs/splice.c:936 fs/splice.c:1349)
__do_splice (fs/splice.c:1431)
__x64_sys_splice (fs/splice.c:1634 fs/splice.c:1616)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
</TASK>
and, once the record is pushed:
UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:300:24
index 18 is out of range for type 'skb_frag_t [17]'
UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:301:41
index 18 is out of range for type 'scatterlist [17]'
UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:302:39
index 18 is out of range for type 'scatterlist [17]'
UBSAN: array-index-out-of-bounds in net/tls/tls_device.c:307:38
index 26 is out of range for type 'scatterlist [17]'
kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
BUG: unable to handle page fault for address: ffffea000411a680
#PF: supervisor instruction fetch in kernel mode
#PF: error_code(0x0011) - permissions violation
Oops: Oops: 0011 [#1] SMP KASAN PTI
Workqueue: ktls_device_destruct 0xffffea000411a680
RIP: 0010:0xffffea000411a680
Call Trace:
<TASK>
worker_thread (kernel/workqueue.c:3405 kernel/workqueue.c:3486)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mrp: fix uninitialised bytes on the wire
br_mrp_alloc_test_skb() builds MRP test frames on an skb from
dev_alloc_skb(), which does not clear the linear data area. On the MRA
ring-role branch the sub-option TLV header is appended with
sub_tlv = skb_put(skb, sizeof(*sub_tlv));
sub_tlv->type = BR_MRP_SUB_TLV_HEADER_TEST_AUTO_MGR;
so sub_tlv->length is never written, and the two trailing alignment bytes
are appended with a bare skb_put() that does not clear them either. The
neighbouring oui and sub_opt regions are explicitly zeroed, so three
uninitialised bytes are left in every MRA MRP_Test frame that goes out.
Put the sub-option TLV header and the alignment padding in a single
skb_put_zero(), which clears both. The AUTO_MGR sub-TLV carries no
payload, so the zeroed length field is already the value it should have. |
| A vulnerability in the memory management handling for the Snort 3 Detection Engine of Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the Snort 3 Detection Engine to restart.
This vulnerability is due to a logic error in memory management when a device is performing Snort 3 SSL packet inspection. An attacker could exploit this vulnerability by sending crafted SSL packets through an established connection to be parsed by the Snort 3 Detection Engine. A successful exploit could allow the attacker to cause a denial of service (DoS) condition when the Snort 3 Detection Engine unexpectedly restarts. |
