| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Sandbox escape due to use-after-free in the Preferences: Backend component. This vulnerability was fixed in Thunderbird 157 and Firefox 157. |
| Race condition, use-after-free in the Audio/Video component. This vulnerability was fixed in Thunderbird 157 and Firefox 157. |
| Use-after-free in the Graphics: Canvas2D component. This vulnerability was fixed in Firefox ESR 153.4, Thunderbird 157, Thunderbird 140.17, Thunderbird 153.4, Firefox 157, Firefox ESR 115.42, and Firefox ESR 140.17. |
| Use-after-free in the DOM: Core & HTML component. This vulnerability was fixed in Firefox ESR 153.4, Thunderbird 157, Thunderbird 140.17, Thunderbird 153.4, Firefox 157, Firefox ESR 115.42, and Firefox ESR 140.17. |
| Privilege escalation due to use-after-free in the Graphics: WebRender component. This vulnerability was fixed in Firefox ESR 153.4, Thunderbird 157, Thunderbird 140.17, Thunderbird 153.4, Firefox 157, Firefox ESR 115.42, and Firefox ESR 140.17. |
| In the Linux kernel, the following vulnerability has been resolved:
net: page_pool: fix use-after-free in page_pool_recycle_ring_bulk()
With CONFIG_PAGE_POOL_STATS=y, page_pool_recycle_ring_bulk() updates
the recycle stats after dropping the producer lock. If it just recycled
the last inflight netmems of a pool being destroyed, page_pool_release()
can pass its producer-lock barrier and free the pool before
recycle_stat_add() runs.
Commit fcc680a647ba7 ("page_pool: allow mixing PPs within one bulk")
moved this stat update after the unlock. Commit 271683bb2cf32
("page_pool: Fix use-after-free in page_pool_recycle_in_ring") later
added the barrier, but only fixed page_pool_recycle_in_ring(). Move
the update back under the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix command effects log lifetime for multipath heads
KASAN reported a use-after-free when an I/O passthrough command was sent
through a multipath namespace head after the controller path that first
created the head had been removed:
BUG: KASAN: slab-use-after-free in nvme_command_effects+0x192/0x200 [nvme_core]
Read of size 4 at addr ffff888141b14400 by task nvme/19811
nvme_command_effects+0x192/0x200 [nvme_core]
nvme_cmd_allowed+0x7e/0x1b0 [nvme_core]
nvme_user_cmd.constprop.0+0x1b5/0x450 [nvme_core]
nvme_ns_head_chr_ioctl+0xf4/0x2a0 [nvme_core]
Move the log cache to the subsystem, with one entry per command set. Both
controllers and namespace heads hold subsystem references, keeping their
log pointers valid until subsystem release. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix cdev lifetime
Sashiko bot reported a potential problem for the cdev lifetime in [0]
- the code there is heavily based on the NVMe code.
Currently the NS head .open and .release file_operations methods take and
put a reference to the nvme_ns_head to ensure that this structure does not
disappear while we open fds for that cdev.
In multipath mode, when we teardown the NS head, we call nvme_cdev_del() ->
cdev_device_del() -> cdev_del(). However after cdev_del() returns, cdevs
already open will remain and their fops will still be callable. As such,
we can still reference the cdev after the nvme_ns_head reference count
drops to 0 (and is freed).
This can be shown with an application which delays between opening the cdev
and issuing the ioctl while the NS head is being torn down:
# ./ioctl_file /dev/ng1n1 &
# waiting 10 seconds ....
# ./ini_nvme_teardown.sh
[ 21.221718] nvme nvme1: Removing ctrl: NQN "nvme-test-target"
[ 21.274609] nvme nvme2: Removing ctrl: NQN "nvme-test-target"
# now going to issue ioctl ....
[ 26.549285] ==================================================================
[ 26.550841] BUG: KASAN: slab-use-after-free in cdev_put.part.0+0x3d/0x40
[ 26.552352] Read of size 8 at addr ffff88811e7fa170 by task ioctl_file/237
[ 26.553805]
[ 26.554227] CPU: 3 UID: 0 PID: 237 Comm: ioctl_file Not tainted 7.2.0-rc1-00004-g6852a10e32d4 #921 PREEMPT(lazy)
[ 26.554236] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 26.554241] Call Trace:
[ 26.554245] <TASK>
[ 26.554248] dump_stack_lvl+0x68/0xa0
[ 26.554266] print_report+0x10d/0x5d0
[ 26.554276] ? __virt_addr_valid+0x21d/0x3f0
[ 26.554287] ? cdev_put.part.0+0x3d/0x40
[ 26.554292] kasan_report+0x96/0xd0
[ 26.554300] ? cdev_put.part.0+0x3d/0x40
[ 26.554307] cdev_put.part.0+0x3d/0x40
[ 26.554313] __fput+0x7bc/0xa70
[ 26.554322] fput_close_sync+0xd8/0x190
[ 26.554328] ? __pfx_fput_close_sync+0x10/0x10
[ 26.554337] __x64_sys_close+0x79/0xd0
[ 26.554344] do_syscall_64+0x117/0x6b0
[ 26.554351] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 26.554358] RIP: 0033:0x7f938c067727
[ 26.554364] Code: 48 89 fa 4c 89 df e8 28 ad 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5bf
[ 26.554369] RSP: 002b:00007fff49f05980 EFLAGS: 00000202 ORIG_RAX: 0000000000000003
[ 26.554376] RAX: ffffffffffffffda RBX: 00007f938bfd7780 RCX: 00007f938c067727
[ 26.554380] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
[ 26.554383] RBP: 00007fff49f05a10 R08: 0000000000000000 R09: 0000000000000000
[ 26.554386] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000
[ 26.554389] R13: 00007fff49f05b40 R14: 00007f938c207000 R15: 000055c148471d78
[ 26.554397] </TASK>
[ 26.554399]
[ 26.575612] Allocated by task 100:
[ 26.575871] kasan_save_stack+0x24/0x50
[ 26.576157] kasan_save_track+0x14/0x30
[ 26.576418] __kasan_kmalloc+0x7f/0x90
[ 26.576668] __kmalloc_noprof+0x281/0x6c0
[ 26.576938] nvme_alloc_ns+0x7f7/0x3170
[ 26.577206] nvme_scan_ns+0x508/0x880
[ 26.577449] async_run_entry_fn+0x8c/0x350
[ 26.577723] process_scheduled_works+0xb6f/0x1a00
[ 26.578034] worker_thread+0x4ad/0xb40
[ 26.578283] kthread+0x34f/0x450
[ 26.578501] ret_from_fork+0x563/0x800
[ 26.578752] ret_from_fork_asm+0x1a/0x30
[ 26.579012]
[ 26.579124] Freed by task 237:
[ 26.579335] kasan_save_stack+0x24/0x50
[ 26.579596] kasan_save_track+0x14/0x30
[ 26.579855] kasan_save_free_info+0x3a/0x60
[ 26.580131] __kasan_slab_free+0x43/0x70
[ 26.580388] kfree+0x321/0x500
[ 26.580591] nvme_ns_head_chr_release+0x39/0x50
[ 26.580883] __fput+0x352/0xa70
[ 26.581095] fput_close_sync+0xd8/0x190
[ 26.581350] __x64_sys_close+0x79/0xd0
[ 26.581595] do_syscall_64+0x117/0x6b0
[ 26.581842] entry_SYSCAL
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Skip detached progs in trampoline images that are still in use
bpf_tramp_image_put() makes sure a trampoline image is not freed while
a task may still be running in it, but nothing similar is done for the
progs called by that image. Detach drops the last prog reference right
away and the prog is freed after grace periods, on the basis that a
task still in the traced function skips the fexit progs once the nop at
ip_after_call is patched to a jump.
That leaves out a task sleeping in a sleepable prog that runs before
the detached one, which no grace period waits for:
CPU 0 CPU 1
in image I, sleeping in prog S
detach P from I's trampoline
-> new image, bpf_tramp_image_put(I)
bpf_prog_put(P), last ref
grace periods, P freed
back from S
__bpf_prog_enter(P)
call P->bpf_func
If S and P are fexit progs the task is already past the patched jump,
and fentry only images don't have one. On x86 this is an int3 in
poisoned bpf_prog_pack memory:
Oops: int3: 0000 [#1] SMP NOPTI
CPU: 18 UID: 0 PID: 94573 Comm: x169 Not tainted 6.18.44 #1 PREEMPT(lazy)
RIP: 0010:0xffffffffc0601d8d
Call Trace:
<TASK>
? bpf_trampoline_6442515411+0x1a4/0x21b
bpf_lsm_bprm_committed_creds+0x5/0x10
security_bprm_committed_creds+0x5f/0x70
begin_new_exec+0x2d6/0x410
...
We hit this in production when progs attached through trampolines got
detached while their hooks were busy, and it was independently found
with a fuzzer and KASAN.
Have the JITs emit a patchable nop in front of each prog call sequence
and record it in the image. When a prog is detached, patch its nop to a
jump over the call sequence. Progs that stay attached keep running for
the tasks that are in the image, and ip_after_call isn't needed anymore.
The task can be in any image that isn't freed yet, not only in the
current one. It sleeps in image I1 that calls S, P and Q, then P is
detached and the trampoline moves to image I2, then Q is detached and
its call is still in I1. So the trampoline keeps a list of its images
until they are freed, and detaching a prog patches its nop in all of
them. Images hold a reference on the trampoline for that long.
On riscv and loongarch a jump of any range takes several instructions,
and a task preempted in the middle of them could resume into half of the
new sequence. The nop is a single instruction there, patched to a near
branch through arch_bpf_trampoline_skip().
With the extra nops, BPF_MAX_TRAMP_LINKS progs no longer fit in a page
on x86 and arm64 (and already didn't on powerpc), so lower the limit
there like s390 does. |
| A flaw was found in the X.Org Server. When a window is removed during an active gesture, the server fails to clean up references to the destroyed window in its gesture tracking data. A local attacker can exploit this flaw to cause a use-after-free condition—where the system accesses memory after it has been released—potentially leading to unauthorized information disclosure or a denial of service (DoS). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, arm64: set up the frame pointer for the exception callback
A program acting as exception boundary saves all callee-saved registers,
so build_prologue() takes the exception_cb path and never calls
push_callee_regs(). That is the only place find_used_callee_regs() runs,
and with it the only place ctx->fp_used is set, so the callback prologue
does not emit the
mov x25, sp
that points BPF_REG_FP at the frame the callback runs on. x25 keeps
whatever it held when bpf_throw() was called. If the throw came from a
subprogram that uses its own BPF stack, that is the subprogram's frame
pointer, and since the subprogram never returns it never restores x25
either.
Stack accesses through BPF_REG_FP are rewritten to be stack pointer
relative, so those still land in the callback's own frame. Materializing
the register does not: a callback that passes the address of a local
variable to a helper hands over an address in the dead subprogram's
frame. That address is below the callback's stack pointer by then, and
the helper's own call chain covers it, so the helper can write over its
own return address. 0x1234 below is the value the helper was asked to
store:
pc : 0x1234
lr : 0x1234
Call trace:
0x1234 (P)
bpf_test_run+0x188/0x3e0
bpf_prog_test_run_skb+0x47c/0x998
__sys_bpf+0xbdc/0xdd8
Kernel panic - not syncing: Oops: Fatal exception in interrupt
Set ctx->fp_used on the exception callback path so that the existing code
further down sets x25 from the stack pointer. The epilogue restores it
from the main program's save area along with the other callee-saved
registers, as it already does. x86 sets the frame pointer for the
callback from the argument it is passed, and powerpc computes it from
the stack pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: clear stale buf->page after recycling on skb build failure
In stmmac_rx(), when napi_build_skb() fails the descriptor page is
recycled back to the page pool with page_pool_recycle_direct(), but
buf->page is left pointing at the recycled page, unlike every other
consumption site in the function which clears the pointer after handing
the page away.
With the stale pointer stmmac_rx_refill() skips the replacement
allocation and programs the already-recycled page back into the RX
descriptor.
Clear buf->page on the napi_build_skb() failure path to keep the buffer
lifecycle consistent with the other consumption sites. |
| In the Linux kernel, the following vulnerability has been resolved:
ipe: protect the dm-verity root hash with RCU
ipe_bdev_setintegrity() frees the old root hash when dm-verity publishes
a new one on ->preresume, while policy evaluation can still be
dereferencing it.
Protect the root hash with RCU. The evaluation path already runs under
rcu_read_lock().
[FW: remove model name according to latest guideline] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: RCU-free the scheduler-containing nouveau_sched
struct nouveau_sched embeds a struct drm_gpu_scheduler (base).
nouveau_sched_destroy() calls nouveau_sched_fini() (which does
drm_sched_fini(&sched->base)) and then frees the object with plain
kfree(sched).
drm_sched_fence_get_timeline_name() returns fence->sched->name, and the
scheduler fence keeps a .release callback so it is not ops-detached on
signalling. A finished fence exported to userspace via drm_syncobj /
sync_file therefore keeps pointing at &sched->base after nouveau_sched_destroy(),
and a later get_timeline_name() -- reachable unprivileged through
SYNC_IOC_FILE_INFO -- dereferences freed memory (KASAN slab-use-after-free
read).
Per the dma-fence lifetime contract the exporter must keep the data backing a
signalled fence alive for an RCU grace period. Free the scheduler-containing
object with kfree_rcu() instead of kfree(). |
| In the Linux kernel, the following vulnerability has been resolved:
HID: alps: fix use-after-free on input2 registration failure
alps_input_configured() stores data->input2 before calling
input_register_device(). If registration fails, input_free_device()
frees the input device but data->input2 still points to the freed memory.
alps_input_configured() calls hid_hw_open() before allocating input2, so
URBs are already active and raw_event can fire during the failure window.
A U1_SP_ABSOLUTE_REPORT_ID report arriving then causes u1_raw_event()
to dereference the freed data->input2 -> use-after-free.
Fix by only storing input2 into drvdata after successful registration
and adding a NULL guard in the raw_event path. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: npu: cancel wdt_work after releasing the WDT IRQ
airoha_npu_remove() calls cancel_work_sync() on each core's wdt_work,
but the watchdog IRQ that queues it is requested with devm_request_irq()
and is freed only after .remove() returns. airoha_npu_wdt_handler() can
therefore schedule_work() again once the cancel has returned. struct
airoha_npu, which contains the work, is devm_kzalloc()'d and is freed in
that same unwind, so the late work dereferences freed memory.
Register the work with devm_work_autocancel() before devm_request_irq()
and drop .remove(). Devres runs in reverse order, so the IRQ is freed
before cancel_work_sync(), including when probe fails. A cancel left in
.remove() cannot get that order. Initializing the work first also stops
a pending watchdog interrupt from queuing an uninitialized work item.
Probe currently calls INIT_WORK() only after devm_request_irq().
This issue was identified during our ongoing static-analysis research
while reviewing kernel code. |
| A flaw was found in xorg-x11-server. A use-after-free vulnerability, where the application accesses memory after it has already been released, occurs in the Present extension because window notification entries are not properly unlinked before cleaning up window resources. An authenticated local X client can exploit this flaw by creating cross-window notifications and subsequently destroying the target window. Successful exploitation primarily results in a Denial of Service (DoS) via an X server crash, and may potentially lead to information disclosure. |
| A flaw was found in xorg-x11-server. A local user can exploit a use-after-free condition—where the software attempts to access memory after it has been freed—by establishing a passive input grab and removing an input device. When subsequent input events are processed, the server dereferences the dangling device pointer. This flaw can lead to arbitrary code execution or a Denial of Service (DoS) via an X server crash. |
| ImageMagick 7.1.2-30 before 7.1.2-32 contains a use after free vulnerability in the WBINFO decoder that occurs when a memory allocation fails during image decoding. Attackers can supply a crafted image that, when decoded under memory allocation failure conditions, causes freed memory to be reused, crashing the application. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: free inet_opt and ireq_opt after an RCU grace period
tcp_v4_syn_recv_sock() transfers ownership of ireq->ireq_opt to the
child socket (newinet->inet_opt) without copying it.
Another cpu can concurrently process a retransmitted SYN for the same
request socket, and send a SYNACK from tcp_check_req().
tcp_v4_send_synack() and inet_csk_route_req() read ireq->ireq_opt
under rcu_read_lock() only, and ip_build_and_send_pkt() and
ip_options_build() then read opt->optlen twice.
Note that the SYNACK timer itself is not an issue: it holds a
reference on its request socket, and inet_csk_reqsk_queue_drop()
calls timer_delete_sync() before the child can be freed.
Since commit 079096f103fa ("tcp/dccp: install syn_recv requests
into ehash table"), request sockets are processed without holding
the listener lock, so nothing prevents the child socket from being
freed while the SYNACK is still being built. TCP child sockets do
not have SOCK_RCU_FREE, and inet_sock_destruct() frees inet_opt
with a plain kfree(), leading to a use-after-free in
ip_options_build().
A similar issue exists with request socket migration
(net.ipv4.tcp_migrate_req=1, or a BPF_SK_REUSEPORT_SELECT_OR_MIGRATE
program). reqsk_timer_handler() clones the request socket with
inet_reqsk_clone(), so that the old request socket and its clone
share the same ireq_opt, then reqsk_migrate_reset() clears the
pointer in the old one. Another cpu holding a reference on the old
request socket can still be using these options (sending a SYNACK,
or creating a child in tcp_v4_syn_recv_sock()) when the clone is
freed, and tcp_v4_reqsk_destructor() also uses a plain kfree().
Readers already use RCU, and other paths replacing inet_opt
(do_ip_setsockopt(), cipso_v4_sock_setattr()...) already use
kfree_rcu(). Use kfree_rcu() in inet_sock_destruct() and
tcp_v4_reqsk_destructor() as well.
IPv6 is not affected by the first issue, because tcp_v6_syn_recv_sock()
duplicates the options. tcp_v6_reqsk_destructor() has the same
migration issue with ipv6_opt, which is only set by CALIPSO. This
will be addressed in a separate patch. |
