Export limit exceeded: 413887 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26033 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98604 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 3.1 Low |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: replace bind when learning local endpoint struct ovpn_bind is published through peer->bind with RCU, but local endpoint learning updates bind->local in place under peer->lock. UDP TX reads the field without that lock. In particular, a concurrent IPv6 update can therefore result in a torn address read. Use ovpn_peer_reset_sockaddr to publish a replacement bind when learning a new local endpoint, just as a remote endpoint change does. Preserve the current remote address and reset the dst cache only after the new bind has been published successfully. Track remote endpoint changes separately so that float notification and transport-address rehashing remain limited to actual peer floats. | ||||
| CVE-2026-98606 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: release the GEM object on virtio_gpu_vram_create() errors virtio_gpu_vram_create() frees the object with a bare kfree(vram) on both error paths after drm_gem_private_object_init() has run, and on the second one after drm_gem_create_mmap_offset() has linked obj->vma_node into the device's VMA offset manager. The freed object stays in that interval tree, so a later lookup or insertion walks freed memory, and the dma_resv and gpuva lock are never destroyed. Call drm_gem_object_release() before kfree() on both paths. | ||||
| CVE-2026-98609 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 2.5 Low |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: fix object leak when drm_gem_handle_create() fails virtio_gpu_gem_create() owns the reference taken by virtio_gpu_object_create(). On the drm_gem_handle_create() error path it calls drm_gem_object_release() instead of dropping that reference. drm_gem_object_release() is the inverse of drm_gem_object_init() and does not touch the reference count or call obj->funcs->free(), so it is only correct as the last step of a destructor, as in virtio_gpu_cleanup_object(). Using it here leaves the bo at refcount 1 with no remaining reference, so virtio_gpu_free_object() never runs and the shmem pages, sg table and virtio_gpu_object are leaked. Since virtio_gpu_object_create() has already set bo->created, VIRTIO_GPU_CMD_RESOURCE_UNREF is not queued either, leaking the host-side resource and the resource id. drm_gem_handle_create_tail() drops the handle reference on all of its internal error paths, so the caller only has to drop its own. Use drm_gem_object_put(), matching the success path below. | ||||
| CVE-2026-98613 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Bound ownership depth through local kptrs and graph roots Program-allocated objects can own other local objects through referenced kptrs. bpf_obj_free_fields() follows those pointers through __bpf_obj_drop_impl() synchronously, before the object storage is freed through RCU. A self-referential local kptr type therefore permits arbitrarily deep object chains, and dropping the head can exhaust the kernel stack. Long acyclic type chains have the same problem. btf_check_and_fixup_fields() still assumes referenced kptrs only point to kernel types and checks ownership through list and rbtree roots only. Its existing rule is sufficient for graph-only cycles: the target of each graph edge must contain a node, so every type in a cycle has both a root and a node. The rule rejects such a type owning another root, breaking every cycle. It also limits graph-only chains to three types, or two if the first type contains a node, and conservatively rejects longer acyclic chains. The missing local-kptr edges, rather than a missed graph-only cycle, are the bug introduced by support for bpf_kptr_xchg() into local kptrs. Replace that restriction with one bounded ownership walk covering graph roots and local referenced kptrs. Run it after all BTF records have been fixed up, reject cycles and paths deeper than eight record-bearing types, and cache each type's suffix depth while checking it against the remaining budget. This also permits the longer acyclic graph-only layouts rejected by the old rule; update their existing BTF tests accordingly. Keep the bound independent of MAX_CALL_FRAMES because recursive destruction can run below a BPF call chain. A plain local pointee without special-field metadata adds only a final non-recursing drop. Non-owning kptrs and kernel-BTF kptrs do not recurse through local records and remain outside the walk. Include local percpu-kptr edges too, although allocation of percpu objects with special fields is currently forbidden, so that relaxing that restriction cannot bypass the ownership bound. btf_check_and_fixup_fields() continues to initialize graph_root.value_rec, including for separately allocated map records. The ownership relationships belong to immutable program BTF and only need validation at BTF load time. | ||||
| CVE-2026-98616 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: reset num_napi when the napi vectors are freed fbn->num_napi is the count of live napi vectors, each of which owns an IRQ. The PM path had freed them without clearing the count. fbnic_pm_suspend() tears the datapath down via ndo_stop() and frees the IRQs, but leaves netif_running() true so resume knows to re-open. Resume rebuilds the datapath in __fbnic_pm_resume() and fbnic_reset_queues() sets num_napi and __fbnic_open() re-allocates the vectors. When the datapath is torn down but never rebuilt, num_napi is left pointing at freed vectors under 2 different scenarios: - a PCIe error recovery that fails (fbnic_err_slot_reset() -> __fbnic_pm_resume() returns an error -> PCI_ERS_RESULT_DISCONNECT), so .resume never runs; or - an __fbnic_open() that fails partway on resume and unwinds, freeing the vectors after fbnic_reset_queues() has already set num_napi. The netdev is then running with num_napi > 0 but napi[] freed, and the eventual remove/unbind close re-enters fbnic_down() -> fbnic_dbg_down() and dereferences the freed vectors: BUG: kernel NULL pointer dereference, address: 0000000000000210 RIP: fbnic_dbg_down+0x28 Clear num_napi when the vectors are freed: in the suspend teardown (a good resume re-establishes it before __fbnic_open()) and on the resume open failure. A redundant ndo_stop() then walks an empty napi[]. The normal ndo_stop() down/up cycle is untouched and keeps num_napi for the next ndo_open(). | ||||
| CVE-2026-98617 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: eth: fbnic: use the Rx queue napi pointer to find the napi vector The queue management ndos pick the napi vector for an Rx queue with: nv = fbn->napi[idx % fbn->num_napi]; The issue is this is only correct in the cases where there are no standalone Tx vectors. In those cases we were allocating the Tx vectors first and then the Rx so the queues would be pointing to Tx NAPI vectors instead of the Rx ones. The mapping the ndos want is already recorded. fbnic_set_netif_napi() publishes it with netif_queue_set_napi(), which stores the napi pointer in netdev_rx_queue.napi, and fbnic_reset_netif_napi() clears it again. Both run under the netdev instance lock that the queue management ndos also hold, so the pointer can be read directly. Use it and drop the divide. The pointer is NULL exactly while the datapath is down, so fbnic_queue_mem_alloc() can reject that case rather than reaching into freed state: netdev_rx_queue_restart() calls it before it tests netif_running(), and fbnic_pm_suspend() leaves netif_running() true across a PCIe recovery that never completes, so a queue restart can arrive after fbnic_stop() has freed the rings and the vectors. fbnic_stop() clears the association in fbnic_reset_netif_queues() before fbnic_free_napi_vectors(), so the NULL is always published first. fbnic_queue_start() and fbnic_queue_stop() need no check of their own, as netdev_rx_queue_reconfig() only reaches them once fbnic_queue_mem_alloc() has succeeded under the same instance lock. | ||||
| CVE-2026-98619 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ethtool: keep rtnl_lock for the ioctl self test An offline self test that brings the interface down and back up with netif_close() / netif_open() requires rtnl_lock for both. Since the ethtool IOCTL path became rtnl-optional for ops-locked drivers, the ETHTOOL_TEST ioctl runs holding only the netdev instance lock, so on an ops-locked driver the self test now tears the device down without rtnl_lock. With lockdep this reproduces deterministically on every offline self test on such a driver; note the sole lock held is the instance lock, not rtnl: WARNING: suspicious RCU usage net/core/netpoll.c:207 suspicious rcu_dereference_protected() usage! 1 lock held by ethtool/107: #0: (&dev->lock){+.+.}, at: dev_ethtool Call Trace: netpoll_poll_disable __dev_close_many netif_close_many netif_close fbnic_self_test dev_ethtool_locked dev_ethtool dev_ioctl sock_ioctl __x64_sys_ioctl Without lockdep the same condition trips ASSERT_RTNL() in __dev_close_many() / __dev_open(); that check only samples the global rtnl state, so it can be masked by a concurrent rtnl holder, but the device is still being reconfigured without the lock it requires. The ethtool self_test is a legacy ioctl-only command, so an ETHTOOL_TEST case is only needed on the ioctl path. Add an opt-in bit for drivers whose self test needs rtnl_lock and set it on the ops-locked drivers whose offline self test tears the interface down and up: - fbnic (ops-locked via queue_mgmt_ops): fbnic_self_test() offline path uses netif_close() / netif_open(). - bnxt (ops-locked via queue_mgmt_ops): bnxt_self_test() offline path goes through bnxt_close_nic() / bnxt_half_open_nic() / bnxt_half_close_nic() / bnxt_open_nic(), which close and reopen the device. | ||||
| CVE-2026-98620 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: unregister net_devices in case of probe failure If register_netdev() fails for one of the MTK_MAX_DEVS devices in mtk_probe(), the error path jumps to err_deinit_ppe, skipping mtk_unreg_dev(). The previously registered net_devices are then freed by mtk_free_dev() while still in NETREG_REGISTERED state, hitting the BUG_ON(dev->reg_state != NETREG_UNREGISTERED). Route the register_netdev() failure to err_unreg_netdev so the net_devices registered so far are properly unregistered before being freed. | ||||
| CVE-2026-98622 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: don't WARN on benign flow_offload_alloc() failure flow_offload_alloc() returns NULL when the conntrack entry is dying (e.g. raced with a conntrack flush) or when the GFP_ATOMIC allocation fails; both are expected under load and neither is a kernel bug. This path runs from softirq on every committed packet, so with panic_on_warn=1 an unprivileged user can panic the box just by racing a conntrack flush against a `tc ... action ct commit` classifier. Reproduced with a custom repro under QEMU: a small, fixed set of UDP flows through `tc filter ... action ct commit` on lo, raced against threads flooding bare ctnetlink CT_DELETE (flush) requests. Hits WARNING: net/sched/act_ct.c:437 (tcf_ct_flow_table_add(), inlined into tcf_ct_act() in this build) within ~15s on the unpatched kernel; same setup is clean on the patched kernel. The fix itself is behavior-preserving: both branches already did `goto err_alloc` before and after, only the WARN is removed. | ||||
| CVE-2026-98625 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: publish HW_DEAD after worker is done flow_offload_work_del() sets NF_FLOW_HW_DEAD before the work handler clears NF_FLOW_HW_PENDING. Once a flow is both HW_DYING and HW_DEAD, a concurrent garbage collection pass can remove it and schedule it for RCU freeing. The offload worker holds neither an RCU read lock nor a reference to the flow. If it is preempted after publishing HW_DEAD, the RCU callback can free the flow before the worker resumes and clears HW_PENDING, resulting in a use-after-free. Move HW_DEAD publication to the common worker epilogue after the pending bit is cleared, making it the final flow access by destroy work. Order all preceding flow accesses before publishing the bit that allows garbage collection to free the object. | ||||
| CVE-2026-98627 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 6.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve packet pointer class displacement in regsafe() regsafe() maps packet pointer IDs between states and checks that each current register range is a subset of the corresponding explored register range. It does not, however, preserve the displacement between registers that share a packet pointer ID. This is unsound because packet range is shared by ID. A bounds check on one class member updates every member, and a later access can consume the range through another member. Commit 022ac0750883 ("bpf: use reg->var_off instead of reg->off for pointers") folded the fixed pointer offset into r64 and removed the old off equality check, so two individually narrower registers can prune even when their displacement has changed. The explored path can then license an out-of-bounds packet access on the pruned path. Require matching range bases for packet pointers with an ID. Together with the existing ID mapping, this preserves the displacement between members of each packet-pointer class without adding per-ID state. Packet pointers without an ID remain unaffected. | ||||
| CVE-2026-98628 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Make post-verification instruction rewrites killable After do_check() returns, the verifier runs several instruction rewrite passes. Some of them patch or remove one instruction at a time. Each operation moves the remaining instruction and auxiliary-data arrays and adjusts all branch offsets, making the overall work quadratic in the program length. A privileged loader can submit 131072 unconditional jumps by zero followed by a valid return. Verification finishes quickly, but bpf_opt_remove_nops() then spends a long time removing each jump separately. Since this post-verification work neither checks for signals nor reschedules, a pending SIGKILL cannot terminate the task until the rewrite finishes. Make bpf_patch_insn_data() and verifier_remove_insns() common cancellation and rescheduling points. These helpers run from BPF_PROG_LOAD process context, and bpf_patch_insn_data() can already sleep while reallocating auxiliary data. Report interrupted constant blinding as -EINTR and propagate it through both JIT paths, including kernels that permit interpreter fallback. Other blinding failures retain the existing fallback behavior. This does not reduce the quadratic cost of the rewrite passes, but it makes the work preemptible and allows a killed loader to be torn down promptly. | ||||
| CVE-2026-98635 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 6.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: block: Fix zones_cond out-of-bounds write on zone report blk_revalidate_disk_zones() sizes the zones_cond array from the disk capacity and zone size, but the index used by blk_revalidate_zone_cond() comes from the device-driven report_zones() walk and is never checked against the array size. A device reporting more zones than fit the array makes blk_zone_set_cond() write out of bounds. One way to reach this is a zone count exceeding 32 bits: both blk_revalidate_zone_args.nr_zones and struct zoned_disk_info.nr_zones are unsigned int, so a disk advertising more than UINT_MAX zones (e.g. 2^32 + 1024 zones of one 512-byte logical block) gets its zone count truncated to a small value, undersizing the array while the report walk keeps counting upward. Check the index against the array size before storing the zone condition, and refuse to revalidate when the zone count does not fit 32 bits. | ||||
| CVE-2026-98638 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Validate the SVE vector length in pkvm_vcpu_init_sve() pkvm_vcpu_init_sve() clamps only the upper bound of the host-provided sve_max_vl, so an invalid vector length reaches sve_state_size_from_vl() and the WARN_ON() there, which is fatal at EL2. The existing !sve_state_size test rejects such a length, but only after the macro has run. Check sve_vl_valid() before deriving the state size. A valid length cannot yield a zero size, so the !sve_state_size test goes with it. | ||||
| CVE-2026-98644 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Avoid soft lockup in __htab_map_lookup_and_delete_batch() __htab_map_lookup_and_delete_batch() has no rescheduling point. The batch count bounds how many entries are copied out, not how many buckets are visited, so one BPF_MAP_LOOKUP_BATCH call can walk the map end to end. The empty-bucket fast path is worse: it stays inside a single rcu_read_lock() / bpf_disable_instrumentation() section for any run of consecutive empty buckets. That holds up on small maps, but it falls apart at scale. On a 144-CPU arm64 host running a CONFIG_PREEMPT_NONE kernel, periodic BPF_MAP_LOOKUP_BATCH calls against an LRU hash map with 16,777,216 buckets held a CPU inside the batch op for 77+ seconds and triggered the soft lockup watchdog. Commit 75134f16e7dd ("bpf: Add schedule points in batch ops") fixed this same problem in the generic batch ops, but not in this htab-native path, which every htab-based hash map variant uses for its lookup[_and_delete] batch ops. Complete that fix here. Leave the critical section after 64 consecutive empty buckets, call cond_resched_tasks_rcu_qs(), and resume at the saved bucket cursor. No locks are held at that point, and resuming from the cursor is already the function's behavior for non-empty buckets. Add the same call to the per-bucket loop after copy_to_user(), where every lock has been dropped. cond_resched_rcu() is not enough here: sleeping with bpf_prog_active elevated makes tracing programs on that CPU silently skip their invocations. Plain cond_resched() is not enough either. It is a no-op under PREEMPT and PREEMPT_LAZY, the only models arm64 and x86 have offered since commit 7dadeaa6e851 ("sched: Further restrict the preemption modes"). It is also never a Tasks RCU quiescent state, in any model: the reschedule counts as a preemption. The walking task stays a holdout and stalls every synchronize_rcu_tasks() caller, ftrace and BPF trampoline teardown included, until the syscall returns [1]. cond_resched_tasks_rcu_qs() is the usual tool for that [2]. It reports the quiescent state at each yield and still reschedules as cond_resched() does on PREEMPT_NONE and PREEMPT_VOLUNTARY kernels. | ||||
| CVE-2026-98666 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: gyro: adis16136: fix unprotected debugfs reads The serial_number file operations are open coded and never call debugfs_file_get(), which debugfs_create_file_unsafe() requires. debugfs_remove_recursive() therefore does not wait for a read in progress, and unbind frees the iio_dev underneath it. Use debugfs_create_file() instead. | ||||
| CVE-2026-98667 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: frequency: adf4377: Fully initialize clk_init_data and clk_parent_data The clk_init_data structure contains several mutually-exclusive members for different methods to specify the possible parents of a clock, prompting drivers to initialize only the members they need. However, not initializing all members may cause subtle issues, which are only exposed when CONFIG_INIT_STACK_ALL_PATTERN or CONFIG_INIT_STACK_NONE is enabled. adf4377_clk_register() fills in init.parent_data, and assumes that init.parent_names is NULL. However, the latter is uninitialized, and thus may cause a crash. Similarly, adf4377_clk_register() fills in only parent_data.fw_name, leaving other members of the clk_parent_data structure uninitialized. Make sure all members are fully initialized, to fix such bugs, and to avoid future breakage when converting drivers to a different method for specifying the parents. | ||||
| CVE-2026-98642 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix UAF due to concurrent consumption of ttrace lists in alloc_bulk Syzkaller repeatedly triggered UAF splats related to nodes in waiting_for_gp_ttrace within the bpf memalloc: BUG: KASAN: slab-use-after-free in llist_del_first+0x85/0x110 lib/llist.c:61 Read of size 8 at addr ffff8881572cd080 by task syz.4.470/5112 ... llist_del_first+0x85/0x110 lib/llist.c:61 alloc_bulk+0x193/0x460 kernel/bpf/memalloc.c:229 bpf_mem_refill+0x386/0x560 kernel/bpf/memalloc.c:436 Freed by task 14: ... __free_rcu kernel/bpf/memalloc.c:281 [inline] __free_rcu_tasks_trace+0x48/0xd0 kernel/bpf/memalloc.c:291 rcu_tasks_invoke_cbs+0x1ec/0x3e0 kernel/rcu/tasks.h:571 rcu_tasks_one_gp+0x13d/0x220 kernel/rcu/tasks.h:621 rcu_tasks_kthread+0xf3/0x120 kernel/rcu/tasks.h:651 The reason is that the UAF occurs after the RCU Tasks Trace GP expires: when the __free_rcu() callback runs, there is no synchronization protecting llist_del_all() against concurrent alloc_bulk() operating on waiting_for_gp_ttrace, leading to the race condition below: CPU0 CPU1 __free_rcu (RCU Tasks Trace callback) alloc_bulk llist_del_first(&c->waiting_for_gp_ttrace) entry = smp_load_acquire(&head->first); do { if (entry == NULL) return NULL; free_all(llist_del_all(&c->waiting_for_gp_ttrace)) llist_for_each_safe(pos, t, llnode) free_one(pos); next = READ_ONCE(entry->next); <-- trigger UAF } while (!try_cmpxchg(&head->first, &entry, next)); In addition, there is also a theoretical race condition on the free_by_rcu_ttrace list. This race requires two preconditions: an in-flight Tasks Trace GP keeping c->call_rcu_ttrace_in_progress == 1, and concurrent cross-CPU frees repopulating c->free_by_rcu_ttrace with new nodes. Under these conditions, the following scenario triggers UAF: // CPU0 // irq work is still busy (on PREEMPT_RT) alloc_bulk() llist_del_first(&c->free_by_rcu_ttrace) entry = smp_load_acquire(&head->first); do { if (entry == NULL) return NULL; // CPU1 bpf_mem_alloc_destroy() WRITE_ONCE(c->draining, true) // wait for CPU0 irq_work_sync() // CPU2 do_call_rcu_ttrace(tgt(CPU0)) if (c->draining) { llist_del_all(&c->free_by_rcu_ttrace) free_all() } // CPU0 continue next = READ_ONCE(entry->next); <-- trigger UAF while (!try_cmpxchg(&head->first, &entry, next)); Fix this by introducing a raw spinlock to synchronize the concurrent consumption on waiting_for_gp_ttrace and free_by_rcu_ttrace. | ||||
| CVE-2026-98643 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 2.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix out-of-bounds read of rtt_min in sock_ops A sockops prog reading skops->rtt_min never checks the sk type: on the tcp_conn_request() path sock_ops->sk is a request_sock (non-full), and the ctx rewrite casts it to a tcp_sock (full) and reads rtt_min past the end of the request_sock, returning dirty adjacent memory. SEC("sockops") int prog(struct bpf_sock_ops *skops) { switch (skops->op) { case BPF_SOCK_OPS_RWND_INIT: leak = skops->rtt_min; /* reads the request_sock OOB */ ... } } For instance one such read returned rtt_min=0xffff8881, the high half of a leaked kernel pointer. Guarding that cast is exactly what SOCK_OPS_GET_FIELD() does -- it checks is_locked_tcp_sock and returns 0 when sock_ops->sk is not a locked full socket. Every other tcp_sock field in sock_ops goes through it; rtt_min is the only one open-coded, so it skips the check. Read rtt_min through SOCK_OPS_GET_FIELD() too. rtt_min is a bit special: it is a struct minmax and we only want the current min, so pass rtt_min.s[0].v. That is equivalent to the old hand-computed offset offsetof(struct tcp_sock, rtt_min) + sizeof_field(struct minmax_sample, t) (s[0] sits at rtt_min + 0 and .v at + sizeof(.t), i.e. what minmax_get() returns), so the loaded field is unchanged and only the full-sock guard is added. The two BUILD_BUG_ON()s that protected the hand-computed offset are no longer needed. Before patch: 0: r1 = *(u64 *)(r1 +0) ; r1 = skops->sk 1: r1 = *(u32 *)(r1 +2324) ; ((tcp_sock *)sk)->rtt_min.s[0].v After patch: 0: *(u64 *)(r1 +56) = r9 1: r9 = *(u8 *)(r1 +50) ; is_locked_tcp_sock 2: if r9 == 0 goto pc+4 ; not a locked full sock -> 0 3: r9 = *(u64 *)(r1 +56) 4: r1 = *(u64 *)(r1 +0) ; r1 = skops->sk 5: r1 = *(u32 *)(r1 +2324) ; rtt_min.s[0].v 6: goto pc+2 7: r9 = *(u64 *)(r1 +56) 8: r1 = 0 | ||||
| CVE-2026-98646 | 1 Linux | 1 Linux Kernel | 2026-10-22 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Skip cond_resched() in inet_csk_listen_stop() under BPF context bpf_sock_destroy() runs from the tcp iterator, under rcu_read_lock(). If the sock is a listener that still has children in its accept queue, tcp_abort() ends up in inet_csk_listen_stop() and the cond_resched() there trips the debug check: BUG: sleeping function called from invalid context at net/ipv4/inet_connection_sock.c:1523 in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 628, name: test_progs preempt_count: 0, expected: 0 RCU nest depth: 1, expected: 0 locks held by test_progs/628: 3, last CPU#3: #0: ffff8881158cee18 (&p->lock){+.+.}-{4:4}, at: bpf_seq_read+0x56/0x1210 #1: ffff8881106bb858 (sk_lock-AF_INET6){+.+.}-{0:0}, at: bpf_iter_tcp_seq_show+0x32b/0x4b0 #2: ffffffffb435af20 (rcu_read_lock){....}-{1:3}, at: bpf_iter_run_prog+0x46b/0xde0 CPU: 3 UID: 0 PID: 628 Comm: test_progs Tainted: G W 7.2.0+ #65 PREEMPT Tainted: [W]=WARN Call Trace: <TASK> dump_stack_lvl+0xc1/0xf0 dump_stack+0x10/0x20 __might_resched+0x3d2/0x610 inet_csk_listen_stop+0x7b/0xbf0 tcp_abort+0x23b/0x3b0 bpf_sock_destroy+0xfc/0x140 bpf_prog_448133d24601754f_iter_tcp6_server+0x81/0x8a bpf_iter_run_prog+0x538/0xde0 bpf_iter_tcp_seq_show+0x26b/0x4b0 bpf_seq_read+0x424/0x1210 vfs_read+0x197/0xe40 ksys_read+0x119/0x240 __x64_sys_read+0x72/0xc0 x64_sys_call+0x647/0x27e0 do_syscall_64+0xe5/0x610 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fad39b28aca RSP: 002b:00007ffc381c61c0 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 00007ffc381c6a88 RCX: 00007fad39b28aca RDX: 0000000000000032 RSI: 00007ffc381c6250 RDI: 0000000000000014 RBP: 00007ffc381c61e0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003 R13: 0000000000000000 R14: 000055f077c1bbb0 R15: 00007fad3a0f3000 </TASK> The commit that added the kfunc already guards lock_sock() in tcp_abort() and udp_abort() with has_current_bpf_ctx(), but missed the listener path. Do the same for the cond_resched(). The loop runs inside the iterator's rcu_read_lock(), it must not reschedule or report a quiescent state there. | ||||