| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject pkt arguments in mutating subprogs
The verifier tracks changes in how PTR_TO_PACKET registers'
bounds are modified across subprog boundaries. PTR_TO_PACKET
registers are actually passed as PTR_TO_MEM, which is assumed
valid for the entire call. This is not the case with packet memory,
where a pskb_* call may invalidate its memory region.
Reject BPF code that passes PTR_TO_PACKET pointers to subprogs that
may mutate a packet. We cannot pass the pointer as a true PTR_TO_PACKET
because we would also need to somehow pass the PTR_TO_PACKET_META
or PTR_TO_PACKET_END to the subprog. Since we cannot avoid representing
the pointer in the subprog as PTR_TO_MEM, only permit it if the
subprog is guaranteed not to mutate the packet. |
| The Web add-on's HTTP server dereferences and releases an uninitialized pointer when it detects a `Content-Length` underflow while processing a `PUT` request. The condition is reachable by an unauthenticated remote client with a single malformed request. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmgenet: stop Tx NAPI before disabling the queues
bcmgenet_netif_stop() and the Wake-on-LAN branch of bcmgenet_suspend()
both disable the Tx queues first and stop Tx NAPI several steps later. A
completion in flight calls netif_tx_wake_queue() in between, and nothing
stops the queue again, so a transmit can reach the rings after they have
been freed.
Close is safe because dev_deactivate_many() stops the qdisc first.
bcmgenet_suspend() does not, so stop Tx NAPI before the queues on both
paths.
KASAN on a Raspberry Pi CM4, driven from an MTU change because suspend
freezes user space before the callback runs:
BUG: KASAN: use-after-free in bcmgenet_xmit+0x17f8/0x2258
Write of size 8 at addr ffffff8055844a68 by task ksoftirqd/0/14
bcmgenet_xmit+0x17f8/0x2258
dev_hard_start_xmit+0x13c/0x588
sch_direct_xmit+0x108/0x340
__dev_queue_xmit+0x1190/0x3848 |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: Fix race condition in accept_queue lifecycle
In nfc_llcp_socket_release(), sockets and listener accept queues are
walked under the local sockets rwlock and bh_lock_sock(). However,
bh_lock_sock() does not synchronise against process-context lock_sock()
held by nfc_llcp_accept_dequeue() during accept(). Because
socket_release() does not check sock_owned_by_user(), both paths can
concurrently unlink and release the same child socket, resulting in
use-after-free or a NULL pointer dereference of child->parent in
nfc_llcp_accept_unlink().
Fix this synchronisation race by having nfc_llcp_socket_release() use
process-context lock_sock() instead of bh_lock_sock():
1. Pop sockets from the local sockets list under the write lock using
nfc_llcp_sock_list_pop() so lock_sock() can be acquired without
holding the rwlock.
2. Because lock_sock() can sleep, defer the final release of the
nfc_llcp_local structure to a workqueue (release_work). This avoids
a sleeping-in-atomic bug when the last local reference is dropped
from softirq context. Additionally, hold a single device reference
on local from registration until final destruction.
3. In nfc_llcp_local_get(), use kref_get_unless_zero() to prevent
resurrecting a local object whose teardown has been scheduled.
4. In llcp_sock_accept(), verify that the listener socket state is still
LLCP_LISTEN after waking from schedule_timeout() to prevent hangs if
the listener is closed concurrently.
5. When unlinking unaccepted child sockets during listener release,
unlink them from local->sockets, call sock_orphan(), and drop their
initial sk_alloc creation reference via sock_put().
6. Make nfc_llcp_accept_unlink() idempotent by guarding parent access with
a NULL check. |
| In the Linux kernel, the following vulnerability has been resolved:
net: spacemit: clear TX descriptor on fragment mapping failure
emac_tx_mem_map() writes TX_DESC_0_OWN into the ring descriptor for
every slot beyond old_head as soon as that slot's memset()'d local
copy is committed with "*tx_desc_addr = tx_desc", i.e. before the
buffers for that slot have necessarily all been mapped successfully.
If emac_tx_map_frag() then fails on a later fragment, the err_free_skb
path calls emac_free_tx_buf() to unmap and drop the skb, but leaves
the already-written descriptor memory untouched, and tx_ring->head is
never advanced past old_head (the "tx_ring->head = head" store is
skipped by the goto).
So a slot between old_head and the rolled-back head can be left with
TX_DESC_0_OWN set and buffer_addr_{1,2} pointing at DMA mappings that
emac_free_tx_buf() just tore down, while software considers that slot
free again. The next successful emac_tx_mem_map() call only rebuilds
old_head itself; if the DMA engine auto-advances into the following
descriptor once it finishes old_head's packet, it will fetch that
stale, already-unmapped address.
emac_tx_clean_desc() already treats emac_free_tx_buf() and clearing
the descriptor as a pair when reclaiming completed descriptors; do
the same in the mapping failure path. |
| Pillow is a Python imaging library. From 11.3.0 until 13.0.0, Pillow has a heap use-after-free when libtiff rejects a tag while encoding TIFF data to an in-memory buffer. When an application saves attacker-influenced TIFF tags to BytesIO, libtiff can reject a tag during encoding in ImagingLibTiffEncode; the error path then frees the output buffer without closing or clearing the TIFF handle, and later cleanup flushes through the write callback into freed memory, which can crash the process and may enable code execution. This issue is fixed in version 13.0.0. |
| Untrusted pointer dereference in Windows Network File System allows an authorized attacker to disclose information locally. |
| Untrusted pointer dereference in Windows Storage Port Driver allows an unauthorized attacker to elevate privileges with a physical attack. |
| Untrusted pointer dereference in Windows NTFS allows an authorized attacker to elevate privileges locally. |
| when EAP runs with -secmgr, the openjdk-orb's JDKBridge honours attacker-supplied CDR codebase URLs during object unmarshalling on :3528, allowing an unauthenticated attacker to load and instantiate arbitrary classes from a remote URL in the server JVM before EJB security interceptors run. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: do not dissolve gigantic pages without runtime support
dissolve_free_hugetlb_folio() doesn't check
hstate_is_gigantic_no_runtime(h) though remove_hugetlb_folio()/
update_and_free_hugetlb_folio() silently bail for such folios, so it frees
a still-listed folio and, on vmemmap restore failure, the
add_hugetlb_folio() rollback corrupts the free list. |
| In the Linux kernel, the following vulnerability has been resolved:
writeback: report a Tasks-RCU quiescent state per cgwb drain pass
cleanup_offline_cgwbs_workfn() drains a dying cgwb by calling
cleanup_offline_cgwb() until it returns false, with a cond_resched()
between passes. On a CONFIG_PREEMPTION kernel that cond_resched() does
nothing: _cond_resched() is a plain "return 0", and under PREEMPT_DYNAMIC
the full and lazy modes disable it. Since commit 7dadeaa6e851 ("sched:
Further restrict the preemption modes") those are the only two models on
the architectures with PREEMPT_LAZY support, arm64 and x86 among them, so
the drain loop never reports a Tasks-RCU quiescent state.
A worker draining a cgwb with millions of attached inodes runs for
minutes. On a 6.18 arm64 host in lazy mode the cgwb worker drained one
dying cgroup's writeback domain for over 11 minutes. A BPF program unlink
(bpf_trampoline_unlink_prog -> bpf_trampoline_update ->
unregister_ftrace_direct -> ftrace_shutdown -> synchronize_rcu_tasks())
waited on that grace period while holding the trampoline mutex, 42 tasks
queued behind it in D state, and the hung task detector fired at 614 s and
panicked the host. Any BPF or ftrace detach during a long drain inherits
the drain's length.
Fix this by calling cond_resched_tasks_rcu_qs() so we do not stall out
anybody who calls sycnrhonize_rcu_tasks(). We put this in a do { } while
loop because if we have many small cgroups cleanup_offline_cgwb() will
return false and we will never call cond_resched_tasks_rcu_qs(), creating
the same problem. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Derive SCX_RQ_IN_WAKEUP from the core enqueue flags
schedule_deferred_locked() skips scheduling a deferred action while
SCX_RQ_IN_WAKEUP is set and relies on the task_woken_scx() call that follows
a wakeup enqueue to run it. enqueue_task_scx() sets the flag from the merged
enqueue flags, which include the flags stashed for a remote activation.
move_remote_task_to_local_dsq() thus sets SCX_RQ_IN_WAKEUP on the
destination rq when the moved task was woken up, although no
task_woken_scx() follows that activation.
An IMMED insert into a busy destination requests a local reenqueue during
that enqueue. The request gets linked but not scheduled and stays pending
until an unrelated wakeup or preemption on that CPU runs the deferred
actions. The IMMED task sits behind the running task in the meantime. If
nothing runs them before the scheduler is disabled, the request outlives the
scheduler and points into its freed per-cpu area, which the next scheduler
dereferences from run_deferred().
Test the core enqueue flags for the wakeup bit. Only the core's wakeup path
is followed by task_woken_scx(). |
| In the Linux kernel, the following vulnerability has been resolved:
RISC-V: KVM: Synchronize hrtimer callback during teardown
The non-Sstc hrtimer callback clears next_set before its final uses of
the enclosing vCPU. If teardown observes next_set as false while the
callback is still running, kvm_riscv_vcpu_timer_cancel() skips
hrtimer_cancel() and kvm_destroy_vcpus() can free the vCPU before the
callback enters kvm_riscv_vcpu_set_interrupt().
A guest can arm the timer with SBI TIME and request shutdown with SBI
legacy shutdown or SRST. A VMM that honors KVM_EXIT_SYSTEM_EVENT and
destroys the VM supplies the teardown side of the race; no post-launch
host ioctl is needed to arm or request teardown.
On upstream master 62cc90241548, generic KASAN reported:
BUG: KASAN: slab-use-after-free in do_raw_spin_lock
Write of size 4 at addr ff60000005e58898
kvm_riscv_vcpu_set_interrupt
kvm_riscv_vcpu_hrtimer_expired
__hrtimer_run_queues
hrtimer_interrupt
The object was allocated by KVM_CREATE_VCPU and freed concurrently by:
kvm_destroy_vcpus
kvm_arch_destroy_vm
kvm_destroy_vm
__fput
For deterministic validation, I added mdelay(1000) immediately after
the existing next_set = false assignment. This only widens the
existing post-clear callback window. A no-delay trace build naturally
reached the callback-after-teardown-start/before-deinit ordering in 12
of 200 runs, but 1,500 stock-kernel stress iterations did not produce a
KASAN report, so natural reproduction is timing-sensitive.
Always invoke hrtimer_cancel() for an initialized timer. Preserve the
existing -EINVAL result when the timer is no longer set, but only after
synchronizing with a running callback.
With this patch, hrtimer_cancel() blocked for the full widened callback
window before vCPU destruction. KASAN reported no error in 100
fixed-and-widened runs or 200 fix-only timing-sweep runs. |
| In the Linux kernel, the following vulnerability has been resolved:
packet: use ubuf_info completion for TX_RING packets
tpacket_snd sends skbs with frags pointing into its ring slots. Slots
are released when skb->destructor is called.
A call to skb_orphan calls skb->destructor before the skb is freed.
This can cause the slot to be reused while still linked into the skb.
Switch to standard zerocopy completion (ubuf_info) so the slot is only
released once all references to the payload are freed or copied.
Restore skb->destructor to standard sock_wfree.
The ubuf_info completion callback can be called with a NULL skb, but
only from net_zcopy_put and related API, used by zerocopy implementations
that hold their own reference on the uarg, such as MSG_ZEROCOPY. This
uarg is only ever completed from skb_zcopy_clear, so skb is always set.
To prevent userspace from aliasing in-flight state on shared ring
slots, allocate tpacket_uarg per packet, rather than per slot. This
adds a small allocation to the transmit path. Use standard kmalloc to
allow backporting to stable kernels.
The uarg holds an sk_wmem_alloc reference, rather than an sk_refcnt
reference. packet_free_tx_ring waits on sk_wmem_alloc before freeing
the ring pages. Always allocate vec->deferred for tx_ring so page-backed
rings also wait on sk_wmem_alloc when skb_copy_ubufs drops page refs
before calling tpacket_ubuf_complete.
Drop the tx_ring.pg_vec test that tpacket_destruct_skb performed before
accessing the slot. The sk_wmem_alloc reference now guarantees that the
slot is valid. The test is also not sufficient by itself, as it reads
pg_vec without pg_vec_lock, so it can race with packet_set_ring.
As a result a slot is released when its payload is copied, which can
be before transmission (e.g., in skb_orphan_frags_rx). If copied
before skb_tx_timestamp() is called, no slot timestamp is recorded,
similar to when skb_orphan() was called early in the datapath before
this patch.
Revert the now unused previous skb_zcopy_.._nouarg infra.
Depends on commit 992cc9f94ca9 ("net/packet: defer vmalloc TX_RING
free until skbs finish"). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix use-after-free and multi-container gap in kfd_dev_mapping
kfd_dev_mapping caches the address_space of the first /dev/kfd opener
so that the GPU reset path can call unmap_mapping_range() to zap all
userspace mappings of doorbell and MMIO ranges. This design has two
bugs that both manifest under SRIOV with multiple containers:
1. Use-after-free / rwsem deadlock. The cached pointer refers to an
inode owned by the first opener's container. When that container
exits and its inode is released, kfd_dev_mapping becomes a dangling
pointer. A subsequent GPU reset dereferences it inside
unmap_mapping_range(), which takes i_mmap_rwsem on the freed inode,
causing a hard hang observable as an uninterruptible rwsem wait.
2. Multi-container gap. Only the first opener's address_space is cached;
VMAs created by later openers live in a different address_space and
are never reached by unmap_mapping_range(). After a GPU reset those
stale mappings keep doorbell and MMIO pages accessible to guest
userspace with no GPU behind them, risking PCIe transaction timeouts
and NMI panics.
Fix both bugs with the same approach used by DRM core (drm_drv.c):
create a private pseudo-filesystem at module init time and allocate one
anonymous inode from it. In kfd_open() redirect every opener's
file->f_mapping to that inode's address_space. The inode is
module-owned, lives exactly as long as the amdgpu module, and collects
VMAs from all openers in one address_space. A single
unmap_mapping_range() call in the reset path then correctly reaches
every container's mappings with no dangling pointer risk.
The hang manifests as an NMI backtrace on the GPU reset workqueue stuck
spinning in rwsem_down_read_slowpath() with a corrupted i_mmap_rwsem:
Workqueue: amdgpu-reset-dev xgpu_ai_mailbox_flr_work [amdgpu]
Call Trace:
<TASK>
kvm_wait+0x1f/0x40
__pv_queued_spin_lock_slowpath+0x31d/0x3a0
_raw_spin_lock_irq+0x51/0x80
rwsem_down_read_slowpath+0xb3/0x550
down_read+0x48/0xd0
unmap_mapping_range+0x71/0x140
kfd_dev_unmap_mapping_range+0x5b/0x140 [amdgpu]
amdgpu_amdkfd_clear_kfd_mapping+0xd8/0x190 [amdgpu]
amdgpu_device_gpu_recover+0x232/0x450 [amdgpu]
xgpu_ai_mailbox_flr_work+0xb5/0xc0 [amdgpu]
process_one_work+0x18e/0x3e0
worker_thread+0x2e3/0x420
kthread+0x10a/0x230
(cherry picked from commit 1128b4a52de1572e87431de837fd9850cb99542c) |
| In the Linux kernel, the following vulnerability has been resolved:
rds: ib: Clear the sg list when mapping an MR fails
rds_ib_map_frmr() stores the caller's scatterlist in the MR before DMA
mapping and registration can fail. On failure, __rds_rdma_map() unpins
the pages and frees the scatterlist, but rds_ib_free_frmr() can still
return the MR to the pool with the stale pointer set.
This leaves the pool with a dangling scatterlist and can lead to local
privilege escalation. KASAN detects the resulting use-after-free when the
MR is later torn down:
BUG: KASAN: slab-use-after-free in __rds_ib_teardown_mr
Read of size 8
Call Trace:
__rds_ib_teardown_mr
rds_ib_unreg_frmr
rds_ib_flush_mr_pool
rds_ib_flush_mrs
rds_free_mr
rds_setsockopt
Store the scatterlist in the MR only after DMA mapping succeeds. If DMA
mapping fails, return directly while the MR fields remain clear; the caller
keeps ownership of the scatterlist and its pinned pages. If a later
registration step fails, unmap the scatterlist and clear the MR fields
before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Delay freeing of shadow S2 structures until VM destruction
We free the shadow S2 structures from kvm_arch_flush_shadow_all(), which
is a Bad Idea(tm). Freeing the page tables is fair game (this is what
this callback is for), but freeing the container that could still be
referenced by another part of the system is not great.
Instead, grow separate destructors that gets called when we tear the VM
down for good. From there, we can nuke both the individual MMUs as well
as the global array that points to them, safe in the knowledge that the
vcpus themselves have been destroyed already. |
| In the Linux kernel, the following vulnerability has been resolved:
kprobes: Fix permanent hang when flushing the kprobe optimizer
Writing 0 to /proc/sys/debug/kprobes-optimization while a kprobe is
jump-optimized never returns. The writer sleeps in D state forever with
kprobe_sysctl_mutex held, so any later read or write of that sysctl
hangs as well. For example, with vfs_read+9 as an optimizable address
in this build:
# cd /sys/kernel/tracing
# echo 'p:myprobe vfs_read+9' >> kprobe_events
# echo 1 > events/kprobes/myprobe/enable
# # wait until /sys/kernel/debug/kprobes/list shows [OPTIMIZED]
# echo 0 > /proc/sys/debug/kprobes-optimization
INFO: task sh:246 blocked for more than 10 seconds.
Call Trace:
<TASK>
__schedule+0x1176/0x4f70
schedule+0xdc/0x2c0
schedule_timeout+0x17b/0x260
wait_for_completion+0x173/0x3c0
wait_for_kprobe_optimizer_locked+0xbc/0x130
proc_kprobes_optimization_handler+0x156/0x1b0
proc_sys_call_handler+0x324/0x490
vfs_write+0x52d/0xfe0
ksys_write+0xff/0x200
do_syscall_64+0x106/0x630
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
...
INFO: task cat:265 is blocked on a mutex likely owned by task sh:246.
wait_for_kprobe_optimizer_locked() reinitializes optimizer_completion,
asks the optimizer thread to flush and sleeps in wait_for_completion().
The thread drains the (un)optimizing lists, but calls complete() only
if completion_done() is true, i.e. if the completion is already done,
which never happens while someone waits. disarm_all_kprobes() and
kprobe_trace_self_tests_init() wait the same way.
Calling complete() unconditionally would not be enough: the waiter
drops kprobe_mutex while it sleeps, and nothing else serializes the
sysctl handler against the debugfs "enabled" file. A second flusher
that still finds the lists non-empty, e.g. because a disabled probe is
queued for unoptimizing, reinitializes the completion under the first:
sysctl write debugfs "enabled" write
unoptimize_all_kprobes()
wait_for_kprobe_optimizer_locked()
init_completion(c)
mutex_unlock(&kprobe_mutex)
wait_for_completion(c)
disarm_all_kprobes()
wait_for_kprobe_optimizer_locked()
init_completion(c)
// c->wait is reset, the first
// waiter is off the queue
mutex_unlock(&kprobe_mutex)
wait_for_completion(c)
kprobe_optimizer()
complete(c)
// wakes the debugfs writer only
where c is &optimizer_completion. Lining up the two writes during an
optimizer pass loses the sysctl writer this way.
Replace the completion with a counter of optimizer passes, bumped at the
end of each pass and signalled with wake_up_var_locked(), both under
kprobe_mutex. A flusher samples the count and waits with
wait_var_event_mutex(), which drops kprobe_mutex only while sleeping, so
a new count means a whole pass ran in the meantime. Nothing is
reinitialized, so several flushers can sleep in the wait at once. |
| In the Linux kernel, the following vulnerability has been resolved:
ipe: fix use-after-free when auditing a newly loaded policy
new_policy() audits the policy after ipe_new_policyfs_node() publishes it
and drops the new directory's inode lock. A concurrent delete can free
the policy while ipe_audit_policy_load() is still using it.
Audit the successful load under that lock.
[FW: remove model name according to latest guideline] |
