| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A buffer overflow vulnerability in the PAPI protocol of HPE Networking AOS-10 could allow an unauthenticated adjacent attacker to access sensitive information. Successful exploitation could allow an attacker to retrieve information which could be used to potentially gain further access to network services supported by AOS-10, and to interrupt the normal operation of the affected service. |
| OpenReception's appointment booking software provides an end-to-end encrypted appointment booking platform. Prior to version 2.2.1, an attacker who captures a pending invite token can replay it to obtain a passkey-registration credential and register their own passkey on the invited account, taking control of that account. For a staff or tenant-admin invite this yields access to the tenant context tied to that account. This issue has been patched in version 2.2.1. |
| ConnMan through 2.0 has a stack-based buffer overflow via a DHCPv6 Reply message. This occurs in get_domains in gdhcp/client.c. It copies a fixed NS_MAXDNAME (1025) bytes from a DHCPv6 DOMAIN_LIST (option 24) value into a 1026-byte stack buffer dns_name regardless of the actual option length, then walks DNS labels with an unbounded "c += jump + 1" loop. A crafted DHCPv6 REPLY with a DOMAIN_LIST option of >= 1025 non-zero bytes makes the label walk leave the buffer and read/write '.' past its end in attacker-chosen strides. An on-link attacker can trigger this without authentication via a forged Router Advertisement (O=1) and a forged DHCPv6 REPLY matching xid/CLIENTID with a long DOMAIN_LIST. The impact is unauthenticated on-link crash of connmand (runs as root). This was introduced in bb06c47. |
| Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to 42.11.16, 43.8.1, 44.9.1, and 45.0.0-beta.6, Electron does not block compromised eMudhra intermediate certificates in Chromium networking, Node.js tls, Node.js https, or Node.js fetch. An attacker who holds a certificate issued through one of these intermediates and can intercept network traffic can impersonate a TLS server to an affected application. This issue is fixed in versions 42.11.16, 43.8.1, 44.9.1, and 45.0.0-beta.6. |
| virtualenv is a tool for creating isolated virtual python environments. From 21.14.9 until 21.14.13, the bash bin/activate script can copy an attacker-controlled --prompt value into PS1 without escaping dollar signs or backticks when both promptvars and POSIX mode are disabled during activation. Re-enabling promptvars, running set -o posix, or starting an interactive child bash that inherits the exported PS1 can then expand command substitution in the stored VIRTUAL_ENV_PROMPT value and execute commands as the user who activates the environment. This issue is fixed in version 21.14.13. |
| Twisted is an event-based framework for internet applications, supporting Python 3.6+. Prior to 26.10.0rc1, the twisted.words.xish.domish ExpatElementStream parser allows an unauthenticated remote peer to keep a container element open while continuously adding child elements. The parser retains the unfinished stanza as an in-memory tree without a byte or element-count limit, and XMPP pre-authentication stream parsing exposes this behavior before credentials are accepted. A single connection can therefore exhaust server memory and terminate the process. This issue is fixed in version 26.10.0rc1. |
| Twisted is an event-based framework for internet applications, supporting Python 3.6+. Prior to 26.10.0rc1, twisted.words.protocols.irc.IRC.dataReceived retains all bytes received without a line feed in its per-connection buffer and applies no maximum line length. The twisted.words.service.IRCUser server subclass inherits this behavior, and buffering occurs before PASS, NICK, or USER authentication commands. An unauthenticated connection can continuously grow the buffer until the shared server process runs out of memory and drops all users. This issue is fixed in version 26.10.0rc1. |
| Twisted is an event-based framework for internet applications, supporting Python 3.6+. Prior to 26.10.0rc1, twisted.conch.telnet.Telnet.dataReceived appends every byte received after IAC SB to a persistent subnegotiation buffer until IAC SE is received, without applying a maximum length. Telnet option negotiation occurs before authentication, so an unauthenticated peer can omit the terminator and continuously grow the buffer. The resulting memory exhaustion can terminate the process and every service it hosts. This issue is fixed in version 26.10.0rc1. |
| OpenReception's appointment booking software provides an end-to-end encrypted appointment booking platform. Prior to version 2.0.0, the account-confirmation link in emails is built from the request Host header, with no allowlist. The unauthenticated POST /api/auth/resend-confirmation rotates a pending invitee's confirmation token and emails a link whose host comes from the request. An attacker who sends one resend-confirmation with Host: attacker.example and a pending invitee's email causes that invitee to receive a confirmation email whose only link points to the attacker. If the invitee clicks, the one-time confirmation token reaches the attacker, who then confirms the account on the real tenant domain and registers a passkey they control, taking over the account before the legitimate invitee ever uses it. All released versions through v1.1.0 are affected; no patched version exists yet. Reaching the app with a spoofed Host depends on the front proxy: the stock Caddy catch-all forwards it, while an operator who configures explicit per-tenant proxy blocks is not affected (see Details 4). The invite path builds links from the trusted tenant.domain (invite/+server.ts:204-210); the resend-confirmation path builds them from the request Host. This issue has been patched in version 2.0.0. |
| OpenReception's appointment booking software provides an end-to-end encrypted appointment booking platform. In versions 2.1.0 and prior, a returning client's six-digit booking PIN can be brute-forced online in the victim tenant. A successful guess yields the client's booking access token, granting access to that client's appointment tunnel, which holds their end-to-end-encrypted appointment data, and the ability to act as the client, for example adding or cancelling appointments in the tunnel. The bypass is cross-tenant: state owned by one tenant removes an authentication protection of a different tenant. This crossing of the tenant boundary is the basis for the scope-changed vector. At time of publication, there are no publicly available patches. |
| AstronRPA through 1.1.6 contains an authentication bypass vulnerability in the OpenResty gateway's auth_handler.lua that accepts any Bearer token without validation. Unauthenticated attackers can send arbitrary Bearer values to reach /api/resource/ and /api/rpa-ai-service/ routes and spoof X-User-Id or user_id headers to act as any user. |
| Pillow is a Python imaging library. From 11.0.0 until 13.0.0, Exif.load() in src/PIL/Image.py repeatedly slices the remaining EXIF data while it begins with the six-byte Exif header. src/PIL/PngImagePlugin.py accepts an uncapped PNG eXIf chunk, so a file filled with repeated headers causes a new shrinking copy on every iteration and quadratic CPU work. The condition is reachable through Image.getexif(), Image._getexif(), and ImageOps.exif_transpose(), including common photo-upload rotation workflows. This issue is fixed in version 13.0.0. |
| The MCTP-over-I2C+GPIO target binding in subsys/pmci/mctp/mctp_i2c_gpio_target.c emulates a small pseudo-register file, where the bus controller first writes a register number and then writes or reads payload bytes. The selected register (b->reg_addr) and the data-phase flag (b->rxtx) were never cleared when the controller issued an I2C STOP, so after a completed transfer the target still had a data register selected while the packet buffer that register refers to had already been consumed and set to NULL by mctp_i2c_gpio_target_stop().
A controller on the bus can re-enter the same branch of mctp_i2c_gpio_target_stop() with a NULL buffer using two ordinary transactions and no authentication: first a normal packet write to MCTP_I2C_GPIO_RX_MSG_ADDR followed by STOP (which delivers and frees b->rx_pkt), then a bare read transaction followed by STOP. The failing read_requested() call leaves the stale state untouched and the I2C driver still delivers the STOP callback, which then calls mctp_bus_rx() with a NULL packet. The symmetric case exists on the transmit side, where the stale MCTP_I2C_GPIO_TX_MSG_ADDR selection dereferences b->tx_pkt->end after b->tx_pkt has been cleared and additionally signals b->tx_complete a second time, causing the next outbound packet to be dropped.
The dereference happens in the I2C target interrupt handler, so on any target that traps accesses to address 0 the result is a fatal exception and a device reset or halt — a denial of service inflicted by any device able to act as controller on the shared management bus (for example compromised firmware on a peer MCTP endpoint or on the BMC). On parts where address 0 is readable, the impact degrades to a malformed packet buffer being handed to the MCTP stack and lost transmit packets. No attacker-controlled value is written and no confidentiality or integrity boundary is crossed.
The fix resets b->reg_addr to MCTP_I2C_GPIO_INVALID_ADDR and clears b->rxtx at every STOP, so a new register must be selected before any data phase can run again. Only builds that opt into the experimental CONFIG_MCTP subsystem with CONFIG_MCTP_I2C_GPIO_TARGET=y are affected. |
| The kernel helper z_waitq_head() (kernel/include/wait_q.h) reads the head of a thread wait queue, but on SMP systems it was called from several places without holding the scheduler spinlock _sched_spinlock that serializes wait-queue mutation. The consequential call site is z_timer_expiration_handler() in kernel/timer.c, which held only the timer subsystem lock timer_lock while reading timer->wait_q and then unpending, setting the return value of, and readying the thread it obtained. halt_thread() in kernel/sched.c removes an aborted thread from its wait queue while holding only _sched_spinlock, so the two paths are not mutually exclusive.
When the last waiter is removed on another CPU inside that window, sys_dlist_peek_head() can return the list sentinel — a pointer into the k_timer object itself — typed as a struct k_thread * (with CONFIG_WAITQ_SCALABLE, rb_get_min() can return an arbitrary node of a tree being restructured), or it can return a pointer to a thread that has already been unpended and, for dynamically allocated threads, freed. The handler then calls unpend_thread_no_timeout(), which performs a sys_dlist_remove() through pointers read from that object, and arch_thread_return_value_set(), which writes unconditionally through the pointer.
The result is out-of-bounds and use-after-free writes in supervisor context, plus scheduler state corruption; a milder outcome is a thread that has re-pended elsewhere being woken with a success return value from an unrelated blocking call. All of the primitives needed to drive the interleaving — k_timer_start(), k_timer_status_sync(), k_thread_create() and k_thread_abort() — are system calls, so with CONFIG_USERSPACE enabled an unprivileged user-mode thread can attempt the race against kernel-owned data.
Exploitation requires a multi-CPU build (CONFIG_MP_MAX_NUM_CPUS greater than one; the affected region is a no-op on uniprocessor targets), local code execution, and winning a narrow timing window, so the practical outcome is most often a kernel crash rather than controlled corruption. The fix splits the helper into z_waitq_head_locked() for callers that already hold the scheduler spinlock and a z_waitq_head() that acquires it, and brings the timer expiration handler's head read, unpend and ready under a single LOCK_SCHED_SPINLOCK region. |
| GraphQL-core is a Python port of the GraphQL.js reference implementation. From 3.0.0 until 3.2.12 and 3.3.0rc1, the OverlappingFieldsCanBeMerged rule in specified_rules repeatedly compares fields that share response names and recursively re-compares flattened inline fragments during the validation phase. The prior named-fragment memoization does not cover this path, so nested repeated inline fragments can drive quadratic and worst-case O(n²·m²) CPU work before any resolver or AST-based depth or complexity control runs. An unauthenticated remote attacker can submit a shallow, highly compressible GraphQL query that pins a worker process and can saturate a multi-worker service. This issue is fixed in versions 3.2.12 and 3.3.0rc1. |
| The user-mode verifier for the peci_transfer() system call, z_vrfy_peci_transfer() in drivers/peci/peci_handlers.c, checked only the device object permission and copied the caller-supplied struct peci_msg with k_usermode_from_copy(). That copy validates the outer structure only; the buf pointers and len values inside the embedded struct peci_buf members tx_buffer and rx_buffer remained fully caller-controlled and were passed unchecked to the driver.
Every in-tree PECI driver dereferences those pointers in supervisor mode: peci_npcx_transfer() in drivers/peci/peci_npcx.c and peci_it8xxx2_transfer() in drivers/peci/peci_ite_it8xxx2.c copy hardware bytes into rx_buffer.buf[i] and read command bytes out of tx_buffer.buf[i], and peci_xec_read()/peci_xec_write() in drivers/peci/peci_mchp_xec.c do the same with no bound on rx_buffer.len at all. A user-mode thread that has been granted the PECI device object — the normal way an application exposes a device under CONFIG_USERSPACE — could therefore point rx_buffer.buf at kernel data structures and have the driver write hardware-supplied bytes there, or point tx_buffer.buf at kernel memory and have its contents pushed onto the PECI/eSPI out-of-band bus.
The impact is a full user-mode-to-kernel escape: an arbitrary kernel write primitive (integrity and, through it, code execution at supervisor privilege), an arbitrary kernel read disclosed to a PECI bus observer, and a trivially reachable supervisor-mode fault if an unmapped address is supplied. Exploitation requires CONFIG_USERSPACE=y, one of the PECI drivers enabled (CONFIG_PECI_NPCX, CONFIG_PECI_XEC or CONFIG_PECI_ITE_IT8XXX2), and local code execution in a user-mode thread holding the PECI device.
The fix adds K_SYSCALL_MEMORY_READ() and K_SYSCALL_MEMORY_WRITE() checks over the two embedded buffers, with a size_add_overflow() guard on the frame-check-sequence byte accounted for in the RX length. |
| A weakness has been identified in oretnom23 php-travel-agency-system. This issue affects some unknown processing of the file admin/update.php. This manipulation of the argument action/full_name/visa_no/hiden/title/description/page_id/user causes sql injection. The attack may be initiated remotely. The exploit has been made available to the public and could be used for attacks. This product uses a rolling release model to deliver continuous updates. As a result, specific version information for affected or updated releases is not available. The project was informed of the problem early through an issue report but has not responded yet. |
| toml-node is a TOML parser for Node.js and the browser. Prior to 5.0.1, the toml.parse() compiler's addTableArray() function in lib/compiler.js rescans the complete assignedPaths and valueAssignments bookkeeping sets for every array-of-tables header. Distinct [[name]] paths are not pruned, so a document with many such headers causes quadratic synchronous work and can block the Node.js event loop, denying service to other operations in the process. This issue is fixed in version 5.0.1. |
| Apache Traffic Server 9.2.15, 10.1.4 and 10.2.0 write one unthrottled diagnostic log line for every internal @ header they strip, so a request carrying many such headers makes the proxy write far more log data than the request contains.
This issue affects Apache Traffic Server: 9.2.15, 10.1.4, 10.2.0.
Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue. |
| Apache Traffic Server can be used to exhaust an HTTP/1.1 origin's worker pool via a malformed padded HTTP/2 DATA frame.
This issue affects Apache Traffic Server: from 8.0.0 through 8.1.11, from 9.0.0 through 9.2.15, from 10.0.0 through 10.1.4, 10.2.0.
Users are recommended to upgrade to version 9.2.16, 10.1.5, or 10.2.1, which fix the issue. |
