| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Convoy is a cloud native webhooks gateway. Prior to 26.6.8, Convoy's GET /api/v1/projects/{projectID}/sources/{sourceID} endpoint authorizes access to the project in the URL, but Handler.GetSource calls sources.Service.FindSourceByID() and fetches the Source only by sourceID without confirming that its ProjectID matches the authorized project. An authenticated user or project-scoped API key holder can substitute another tenant's Source identifier and receive that Source's complete record, including unredacted AMQP, Kafka, SQS, or Google PubSub credentials. The list endpoint remains project-scoped; the single-item Source lookup is affected. This issue is fixed in version 26.6.8. |
| The Tutor LMS – eLearning and online course solution plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 4.0.8 via the 'student_id' parameter due to missing validation on a user controlled key. This makes it possible for authenticated attackers, with subscriber-level access and above, to disclose the email address and Tutor profile phone number of arbitrary WordPress users, including Administrators, by iterating over user IDs via the student_id parameter. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Drop scalar id on sign-extending narrowing stack fills
When a spilled scalar is filled back with a sign-extending narrowing load
(BPF_MEMSX), check_stack_read_fixed_off() copies the spilled register
including its scalar id, but coerce_reg_to_size_sx() then sign-extends the
filled register's value. If the same slot is also filled with a plain
zero-extending load (BPF_MEM), both destination registers share the id yet
hold different values. A later 'if <zext-reg> == const' then refines the
sign-extended register through sync_linked_regs() to a value it does not
have at runtime (e.g. the verifier believes 0x80000000 while the register
is 0xffffffff80000000), which can be turned into an out-of-bounds access.
Drop the shared scalar id at the sign-extension site in check_mem_access()
when sign extension actually changes the value, mirroring the BPF_MOVSX
handling in check_alu_op() (no_sext = reg_umax < 2^(size*8-1)). |
| vm2 (npm) versions 3.12.0 and earlier contain a sandbox escape in `VM` and `NodeVM`. When an embedder exposes a host API that returns a host-realm Promise, the bridge's rejection sanitizer (hostPromiseSanitizeReject / makeSanitizedPromiseCallback / normalizeHostPromiseCallbacks in lib/bridge.js) only wraps `then`/`catch` rejection slots that hold a function, and the sandbox-side `Symbol.species`/`.then` neutralization is installed only on the sandbox intrinsic `Promise.prototype`, so it never applies to a host Promise. Code running inside the sandbox can overwrite `p.constructor[Symbol.species]` on the host Promise and then call `p.then()` with no `onRejected` handler; V8 substitutes its internal Thrower, which re-throws the raw host rejection value into a resolve/reject closure captured by the attacker. This delivers an unsanitized, fully functional bridge proxy of the host object to sandboxed code, bypassing handleException and hostPromiseSanitizeReject. If the rejection value is host-pivotable (for example a host `process` object), this results in arbitrary code execution on the host. Fixed in 3.12.1. |
| snipe-it before 8.7.0 contains an incorrect calculation vulnerability in checkout request handling that allows authenticated users to corrupt the assets.requests_counter through duplicate submissions and cancellations without active requests. Attackers can repeatedly call cancel endpoints without active requests to drive the counter negative, or submit duplicate checkout requests to inflate the counter, misrepresenting pending demand in the admin queue. |
| The Appointment Booking Plugin – LatePoint | Calendar & Scheduling for WordPress plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 5.6.9 via the set_customer_object due to missing validation on a user controlled key. This makes it possible for unauthenticated attackers to enumerate arbitrary customer records and disclose personally identifiable information - including first name, last name, email address, and phone number - by iterating the customer[id] parameter. This issue is exploitable only when the site is configured with customer authentication disabled (guest checkout enabled). |
| IBM WebSphere Application Server 9.0, and 8.5 could allow a remote attacker to obtain sensitive information about the file system through the FileTransfer servlet. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: 9483/1: select HAVE_POSIX_CPU_TIMERS_TASK_WORK
Commit c6e61c06d606 ("ARM: 9463/1: Allow to enable RT") enabled PREEMPT_RT
on ARM but did not select HAVE_POSIX_CPU_TIMERS_TASK_WORK. This leaves
CONFIG_POSIX_CPU_TIMERS_TASK_WORK disabled, so CPU timers expire in hard
IRQ context.
On PREEMPT_RT this makes run_posix_cpu_timers() take the sleeping
sighand->siglock:
BUG: sleeping function called from invalid context at spinlock_rt.c:48
rt_spin_lock from lock_task_sighand
lock_task_sighand from run_posix_cpu_timers
run_posix_cpu_timers from update_process_times
ARM handles TIF_NOTIFY_RESUME on all return-to-user paths, including v7-M.
ARM32 KVM host support was removed by commit 541ad0150ca4 ("arm: Remove
32bit KVM host support"), so the select need not be conditional on KVM.
Select it to defer POSIX CPU timer expiry to task context.
Reproduced with setrlimit(RLIMIT_CPU, ...) and a busy loop. The same path
is used by setitimer(ITIMER_PROF or ITIMER_VIRTUAL) and POSIX CPU timers
created with timer_create(). |
| In the Linux kernel, the following vulnerability has been resolved:
liveupdate: Remember FLB retrieve() status
LUO keeps track of successful retrieve attempts on an FLB. It does so
to avoid multiple retrievals of the same FLB. Multiple retrievals cause
problems because once the FLB is retrieved, the serialized data
structures are likely freed and the FLB is likely in a very different
state from what the code expects.
All this works well when retrieve succeeds. When it fails,
luo_flb_retrieve_one() returns the error immediately, without ever
storing anywhere that a retrieve was attempted or what its error code
was. If the user attempts to retrieve another file registered with the
same FLB, LUO will attempt to call the FLB's retrieve() callback again.
The retry is problematic for much of the same reasons listed above. The
FLB is likely in a very different state than what the retrieve logic
normally expects (e.g. some KHO pages may have already been restored and
freed).
There is no sane way of attempting the retrieve again. Remember the
error retrieve returned and directly return it on a retry.
This is done by changing the retrieved bool to a retrieve_status
integer. A value of 0 means retrieve was never attempted, a positive
value means it succeeded, and a negative value means it failed and the
error code is the value.
This is similar to commit f85b1c6af5bc ("liveupdate: luo_file: remember
retrieve() status") which did the same for LUO files. |
| In the Linux kernel, the following vulnerability has been resolved:
media: qcom: iris: handle runtime PM resume failure in core deinit
Check the return value of pm_runtime_resume_and_get() in
iris_core_deinit().
If runtime PM resume fails, skip hardware power-off operations but
still perform software teardown and state transition. Also skip the
corresponding pm_runtime_put_sync() call to avoid unbalanced runtime
PM references. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject programs with inlined helpers if JIT is not available
When an architecture (such as LoongArch, ARM64, and RISC-V) implements
bpf_jit_inlines_helper_call(), the verifier skips rewriting the helper
call offset (insn->imm) in bpf_do_misc_fixups(). This is because the
helper is expected to be inlined by the JIT compiler later. Therefore,
insn->imm remains as the raw helper enum ID.
However, if JIT is disabled at runtime (net.core.bpf_jit_enable=0) or
if JIT compilation fails dynamically (e.g., due to OOM), the program
falls back to the BPF interpreter.
When the interpreter executes (__bpf_call_base + insn->imm) with the
unpatched raw ID, it jumps into an invalid address space, triggering
an instruction alignment fault or a kernel panic.
Although these helpers have valid C implementations in the kernel, the
omission of offset rewriting makes runtime interpreter fallback fatal.
Fix this by setting 'prog->jit_required = 1' when helper call rewriting
is skipped for JIT inlining. This ensures that such programs are safely
rejected if JIT is not available, preventing the runtime kernel panic. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix vmlinux BTF prep race in bpf_get_btf_vmlinux
bpf_get_btf_vmlinux() lazily parses the vmlinux BTF under the
bpf_verifier_lock, but publishes the result through a plain store
and re-checks it through a plain lockless load. Nothing orders
the stores initializing the struct btf inside btf_parse_vmlinux()
against the store publishing the pointer: On a weakly ordered
arch, a concurrent first-time caller taking the lockless fast
path could in principle observe the pointer before the parsed
contents are visible. The mutex_unlock() does not help such a
reader given it only synchronizes with a later acquisition of the
same lock. Thus, publish the pointer with smp_store_release()
and read it on the fast path with smp_load_acquire().
Acquire semantics are needed rather than a dependency-ordered
READ_ONCE(): btf_parse_vmlinux() also populates globals outside
the returned object (e.g. bpf_ctx_convert.t). An address
dependency would only order accesses performed through the
pointer and not cover other globals. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: dac: ad5686: missing NULL check on match data
Verify that chip_info pointer is not NULL. If a user binds the driver
using driver_override via sysfs with a device name not present in the
id_table or of_match_table, match data will be NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: Serialize channel state checks
pause() and resume() read and update channel state without holding vc.lock,
while the interrupt handlers update the same state under it. Take the same
lock around those state checks so that request, status, and configured stay
consistent.
For example, pause() can observe EDMA_ST_BUSY right before the interrupt
handler completes the final descriptor and moves the channel to
EDMA_ST_IDLE, and then record EDMA_REQ_PAUSE on an already idle channel. No
further interrupt will acknowledge the request, and since issue_pending()
requires EDMA_REQ_NONE, the channel is wedged for good: terminate_all()
leaves the stale request behind, so even reconfiguring the channel does not
recover it.
issue_pending() already runs under vc.lock, but it tests configured before
taking it. Move that test under the lock as well, so configured, request,
and status are evaluated as one channel-state snapshot. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: bcm-vk: Use acquire/release for msgq_inited
bcm_vk_sync_msgq() fills the message queue information and then sets
msgq_inited. Readers call bcm_vk_drv_access_ok() before accessing the
message queues and their cached queue information.
atomic_set()/atomic_read() do not order those accesses. A reader can see
msgq_inited set while still seeing stale queue information. Use release
when publishing the initialized queues and acquire when checking the gate.
Keep the clear in bcm_vk_blk_drv_access() as atomic_set(). It closes the
gate and does not publish queue state to readers. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Avoid possible memory reclaim deadlock in TX EQTR context
TX EQTR may run while devfreq gear scaling has quiesced the UFS
tagset. In that context, functions ufshcd_tx_eqtr(), __ufshcd_tx_eqtr()
and ufs_qcom_get_rx_fom() allocate memory with GFP_KERNEL. If direct
reclaim is triggered, reclaim/writeback can depend on I/O to UFS
device. Because the queue is quiesced, this can cause deadlock.
Use memalloc_noio_save/restore() in ufshcd_tx_eqtr() to cover all
allocations in the TX EQTR call tree, including:
- params->eqtr_record in ufshcd_tx_eqtr()
- eqtr_data in __ufshcd_tx_eqtr()
- params in ufs_qcom_get_rx_fom()
This is preferred over tagging individual call sites with GFP_NOIO, as it
automatically covers any future allocations added anywhere in the call tree
without requiring each caller to be aware of this constraint.
[mkp: fix label as suggested by Bart] |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: keembay - Fix AEAD unregister count in error path
register_aes_algs() registers the AEAD algorithms before registering the
skcipher algorithms. If skcipher registration fails, the function unwinds
the earlier AEAD registration with crypto_engine_unregister_aeads(), but it
passes ARRAY_SIZE(algs), which is the skcipher table size.
Use ARRAY_SIZE(algs_aead) for the AEAD unwind path so the unregister helper
iterates over the same table that was registered. Also clarify the nearby
comment: the crypto registration helpers clean up algorithms registered
within the same call, while this function must still unwind earlier
successful registration steps. |
| In the Linux kernel, the following vulnerability has been resolved:
leds: lp5860: Fix a potential double-unlock
In lp5860_device_init(), if lp5860_init_dt() fails, an already unlocked
mutex is unlocked another time.
Slightly rework how the lock is taken/released to avoid this potential
double unlock. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: camcc-sc8280xp: unregister CAMCC_GDSC_CLK
With the introduction of sync_state support in the clk and pmdomain
subsystems, the following warning happens when the unused clocks are
shutdown in camcc-sc8280xp:
[ 15.408367] titan_top_gdsc status stuck at 'on'
[ 15.408429] WARNING: drivers/clk/qcom/gdsc.c:178 at gdsc_toggle_logic+0x14c/0x160, CPU#2: kworker/u32:1/14
[ 15.408462] Modules linked in: bnep vfat fat ath11k_pci(+) ath11k mac80211 cfg80211 mhi libarc4 snd_soc_wcd938x snd_soc_wcd938x_sdw snd_soc_wcd_classh hci_uart snd_soc_wcd_common
snd_soc_sc8280xp soundwire_qcom snd_soc_wcd_mbhc snd_soc_qcom_sdw slimbus snd_soc_qcom_common regmap_sdw btqca btrtl qcom_camss soundwire_bus btbcm btintel snd_soc_sdca snd_soc_lpass_wsa_macro
bluetooth snd_soc_lpass_tx_macro snd_soc_lpass_va_macro snd_soc_lpass_rx_macro snd_soc_hdmi_codec snd_soc_lpass_macro_common videobuf2_dma_sg ov5675 v4l2_fwnode videobuf2_memops
qcom_spmi_adc5 snd_soc_core qcom_spmi_adc_tm5 videobuf2_v4l2 snd_seq snd_seq_device videobuf2_common v4l2_async qcom_vadc_common qcom_spmi_temp_alarm pm8941_pwrkey industrialio videodev
snd_compress rfkill ac97_bus snd_pcm_dmaengine qcom_tsens mc qcom_edac snd_pcm pci_pwrctrl_pwrseq qcom_cpufreq_hw snd_timer snd qcomtee soundcore tee leds_gpio joydev binfmt_misc zram
lz4hc_compress governor_simpleondemand panel_edp msm xhci_plat_hcd nvme nvme_core dwc3 qcom_pm8008_regulator
[ 15.408688] ucsi_glink nvme_keyring nvme_auth pmic_glink_altmode udc_core typec_ucsi aux_hpd_bridge qcom_battmgr ulpi ubwc_config socinfo ocmem drm_gpuvm qcom_q6v5_pas drm_exec
qcom_pil_info leds_qcom_lpg gpu_sched led_class_multicolor rtc_pm8xxx qcom_pbs qcom_common drm_display_helper qcom_pon qcom_glink_smem qcom_glink ghash_ce pwrseq_qcom_wcn gpio_sbu_mux
qcom_stats phy_qcom_qmp_combo qcom_q6v5 gf128mul cec dispcc_sc8280xp phy_qcom_edp camcc_sc8280xp i2c_qcom_cci qcom_sysmon drm_dp_aux_bus mdt_loader aux_bridge qcom_pm8008 i2c_hid_of_elan
dwc3_qcom_legacy llcc_qcom icc_bwmon gpi typec qcom_refgen_regulator phy_qcom_qmp_usb nvmem_qfprom qcom_ipcc phy_qcom_snps_femto_v2 gpucc_sc8280xp pinctrl_sc8280xp_lpass_lpi qcom_hwspinlock
pinctrl_lpass_lpi lpasscc_sc8280xp qrtr qcom_aoss pmic_glink pdr_interface phy_qcom_qmp_pcie qcom_smd qcom_pdr_msg icc_osm_l3 qcom_wdt qmi_helpers qcom_rng smp2p rpmsg_core gpio_keys pwm_bl
smem hid_multitouch fuse i2c_dev
[ 15.408928] CPU: 2 UID: 0 PID: 14 Comm: kworker/u32:1 Not tainted 7.1.0+ #2 PREEMPT(lazy)
[ 15.408937] Hardware name: LENOVO 21BX0016US/21BX0016US, BIOS N3HET88W (1.60 ) 03/14/2024
[ 15.408942] Workqueue: pm pm_runtime_work
[ 15.408959] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 15.408967] pc : gdsc_toggle_logic+0x14c/0x160
[ 15.408978] lr : gdsc_toggle_logic+0x14c/0x160
[ 15.408987] sp : ffff8000800f3b40
[ 15.408991] x29: ffff8000800f3b40 x28: 0000000000000000 x27: 0000000000000000
[ 15.409003] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
[ 15.409014] x23: 0000000000000000 x22: 0000000000000001 x21: ffffa33f298fca88
[ 15.409024] x20: 0000000000000000 x19: ffffa33f298fc5b0 x18: 00cd15db75dacefd
[ 15.409035] x17: 000000040044ffff x16: ffffa33f3b1a3d88 x15: 726f776b80000002
[ 15.409045] x14: ffffffffffffffff x13: 0000000000000028 x12: 0101010101010101
[ 15.409056] x11: 7f7f7f7f7f7f7f7f x10: fefeff3039313274 x9 : ffffa33f3a5edafc
[ 15.409067] x8 : ffff8000800f3780 x7 : 0000000000000001 x6 : 0000000000000001
[ 15.409078] x5 : ffff000bf3ca1288 x4 : 0000000000000000 x3 : ffff5cccb6a3f000
[ 15.409088] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000080ae0000
[ 15.409098] Call trace:
[ 15.409103] gdsc_toggle_logic+0x14c/0x160 (P)
[ 15.409115] gdsc_disable+0x4c/0x190
[ 15.409126] _genp
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/lima: call drm_mm_init() with a valid allocation range
lima_vm_create() is currently run before va_start and va_end are set up,
meaning they are both 0. lima_vm_create() runs drm_mm_init() with them
as arguments for the allocator, and if DRM_DEBUG_MM is enabled the
DRM_MM_BUG_ON check in drm_mm_init then fires, as seen here on
exynos4412-odroid-u2:
[ 1.736297] ------------[ cut here ]------------
[ 1.740370] kernel BUG at drivers/gpu/drm/drm_mm.c:931!
[ 1.745574] Internal error: Oops - BUG: 0 [#1] SMP ARM
[ 1.750697] Modules linked in:
[ 1.753734] CPU: 0 UID: 0 PID: 41 Comm: kworker/u16:1 Not tainted 7.0.10-postmarketos-exynos4 #11 PREEMPT
[ 1.763372] Hardware name: Samsung Exynos (Flattened Device Tree)
[ 1.769446] Workqueue: events_unbound deferred_probe_work_func
[ 1.775261] PC is at drm_mm_init+0x9c/0xa4
[ 1.779339] LR is at lima_vm_create+0x144/0x17c
[ ... ]
Fix the issue by moving the lima_vm_create() call after va_start and
va_end are set up. |
