| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: imx: Add a channel shutdown field
sashiko complained about possible teardown problem. The scenario
CPU 0 CPU 1
imx_mu_isr() imx_mu_shutdown()
imx_mu_xcr_rmw(priv, IMX_MU_RCR, 0, IMX_MU_xCR_RIEn(priv->dcfg->type, cp->idx));
imx_mu_specific_rx()
imx_mu_xcr_rmw(priv, IMX_MU_RCR, IMX_MU_xCR_RIEn(priv->dcfg->type, 0), 0);
free_irq()
The RX event remains enabled because in this short window the RX event
was disabled in ->shutdown() while the interrupt was active and then
enabled again by the ISR while ->shutdown waited in free_irq().
This race requires timing and if happens can be problematic on shared
handlers if the "removed" channel triggers an interrupt. In this case
the irq-core will shutdown the interrupt with the "nobody cared"
message.
Introduce imx_mu_con_priv::shutdown to signal that the channel is
shutting down. This flag is set with the lock held (by
imx_mu_xcr_clr_shut()). The unmask side uses imx_mu_xcr_set_act() which
only enables the event if the channel has not been shutdown and
serialises on the same lock. |
| In the Linux kernel, the following vulnerability has been resolved:
mailbox: imx: Use devm_pm_runtime_enable()
sashiko complained about early usage of the device while probe isn't
completed. This can be mitigated by delaying the pm_runtime_enable()
into the removal path instead doing it early. This ensures that in an
error case the device is removed (and imx_mu_shutdown()) before
pm_runtime_disable() so we don't have to do this manually.
For the order to work, lets move devm_mbox_controller_register() until
after the pm-runtime part. So the reverse order will be mbox-controller
removal followed by disabling pm runtime.
Use devm_pm_runtime_enable(), remove manual pm_runtime_disable()
invocations and move the pm_runtime handling in probe before
devm_mbox_controller_register(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Properly acquire queue buffers in CRIU restore
When kfd_queue_acquire_buffers() was split off from
set_queue_properties_from_user(), set_queue_properties_from_criu()
was missed. Thus, set_queue_properties_from_criu() is not
filling out the buffer fields of queue_properties, which
can come up when subsequent code expects them to be non-null.
Add the proper call to kfd_queue_acquire_buffers(), and also
use the right cast types in set_queue_properties_from_criu()
(which were missed at the same time)
(cherry picked from commit 88ed96abbbe27b70193544fbc1ee06448c274714) |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: stop exchanging reflink flags when exchanging mappings
When an exchange covers both files from offset 0 to i_disk_size,
xmi_can_exchange_reflink_flags() assumes every mapping moved and hands
the reflink flag over to the other file.
That assumption is wrong. A file can still own shared blocks past
i_disk_size, e.g. after EXCHANGE_RANGE_TO_EOF sets a smaller size
without unmapping anything. The flag is cleared anyway, and the next
write to such a block happens in place instead of CoW, corrupting the
other file that shares it.
Commit a23eca88448e ("xfs: fix exchange-range reflink flag clearing
issue with INO1_WRITTEN") fixed one instance of this. Rather than add
another special case, stop moving the flags.
xfs_exchmaps_ensure_reflink() already sets the flag on both inodes
before the exchange, so both just keep it.
Nothing sets CLEAR_INO{1,2}_REFLINK anymore. Intents logged by older
kernels may still carry them; recovery already masks them off, so they
stay in the log format mask and are ignored.
XFS_IOC_SWAPEXT has the same problem: it moves the reflink flag from
one inode to the other along with the extents. Just removing that is
not enough here: the exchange path flags both inodes up front in
xfs_exchmaps_ensure_reflink(), but swapext has no such step, so the
inode receiving the shared extents would be left without the flag.
Set it on both inodes instead, and make sure both have a CoW fork,
since an inode with the reflink flag is expected to have one.
The flag now stays until FALLOC_FL_UNSHARE_RANGE, xfs_scrub, or a
truncate to zero removes it. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: refuse an automount below a mount that is in no namespace
It's possible to add autmounts even when the parent mount isn't in the
mount namespace of the caller. The only requirement we have is that the
parent mount namespace must not be NULL, i.e., unmounted.
Problem is that clone_private_mount() has MNT_NS_INTERNAL which makes
that trivially true. So that passes the test and attach_recursive_mnt()
accepts that as a mount point and funny enough, count_mounts()
dereferences MNT_NS_INTERNAL. The problem is it is an error pointer...
So we can reach this in userspace via fanotify. A filesystem mark on the
lower filesystem of an overlay reports paths on the layer clone and
reading the event hands out a descriptor on it. For example with debugfs
as the lower layer it goes kaboom:
openat(evfd, "tracing", O_DIRECTORY)
Oops: general protection fault
KASAN: null-ptr-deref in range [0x1d0-0x1d7]
RIP: 0010:count_mounts+0x35/0x200
attach_recursive_mnt
finish_automount
And since that sleeping beauty happens under namespace_sem held for
writing every mount operation on the system blocks from then on.
Congrats.
Use is_mounted() instead which rejects unmounted and internal mounts
alike. The open fails with EINVAL just as it did before
clone_private_mount() used MNT_NS_INTERNAL. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: unhash a dentry before detaching the mounts on it
unlink(), rmdir() and rename() remove the entry from the filesystem,
call detach_mounts() on the entry with the inode locked and then call
d_delete() once the inode is unlocked.
The thing is that between detach_mounts() and d_delete() the dentry is
still hashed and positive. But after detach_mounts() nothing covers the
dentry anymore. A lookup that finds this dentry in the dcache can
uncover what the mounts hid.
That's a problem when unlinking files or directories that are
mountpoints in other mount namespaces. Everybody who had the underlying
entry covered can race the detach_mount() call until d_delete() has run.
The race window isn't all that small. It encompasses namespace_unlock()
with a full synchronize_rcu_expedited() grace period and the
inode_unlock() of the entry.
In my experiments three walkers that kept trying read an overmounted
file in 11938 of the 16140 unlinks that removed its mountpoint from a
bind mount of the filesystem within a minute.
Fun fact, d_invalidate() has the same ordering problem but gets it
right. It unhashes the dentry first and detaches the mounts afterwards.
Let's do the same in __detach_mounts():
- A lookup that hasn't found the dentry yet misses it in the dcache and
waits for the directory lock that the caller holds until the name is
gone for good.
- A lockless lookup that found it already fails the mount_lock check
while the dentry still counts as a mountpoint and the d_seq check once
it doesn't, and retries.
This fixes the lockless path. We still need to fix the reference count
lookup in a follow-up patch.
So d_drop() the dentry. The dentry stays positive and held but can't be
found anymore. Then proceed with the detach and unlink.
Reproducer:
The reads were counted with the program below, three walkers for 60 s
in a VM with 4 CPUs. The race window is stretched with the debug patch
pasted here. fs.detach_race_walk_us sleeps in lookup_fast() once it
found a mountpoint dentry and before its mounts are crossed.
fs.detach_race_unlink_us sleeps in vfs_unlink() between detach_mounts()
and d_delete().
// SPDX-License-Identifier: GPL-2.0
/*
* unlink_covered: unlink a file that is a mountpoint in a detached copy of
* its mount, against lookups that open it through that copy.
*
* A is a tmpfs with the file f1 (content SECRET_F) and the plain file
* MARK_A. A' is an open_tree(OPEN_TREE_CLONE) copy of A with MARK_A bound
* on A'/f1, held through an O_PATH fd on its root once the tree fd is
* closed. Walkers open f1 through that fd while the driver unlinks A/f1,
* where nothing is mounted on it. A walker may read MARK_A or get ENOENT.
* A read of SECRET_F is a hit: the name was found after its mount was
* gone. The lockless walks use openat2(RESOLVE_CACHED).
*
* usage: unlink_covered [-t seconds] [-w walkers]
*/
#ifndef _GNU_SOURCE
#define _GNU_SOURCE
#endif
#include <errno.h>
#include <fcntl.h>
#include <pthread.h>
#include <stdatomic.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/mount.h>
#include <sys/stat.h>
#include <sys/syscall.h>
#include <linux/openat2.h>
#ifndef __NR_open_tree
#define __NR_open_tree 428
#endif
#ifndef __NR_move_mount
#define __NR_move_mount 429
#endif
#ifndef __NR_openat2
#define __NR_openat2 437
#endif
#ifndef OPEN_TREE_CLONE
#define OPEN_TREE_CLONE 1
#endif
#ifndef OPEN_TREE_CLOEXEC
#define OPEN_TREE_CLOEXEC O_CLOEXEC
#endif
#ifndef MOVE_MOUNT_F_EMPTY_PATH
#define MOVE_MOUNT_F_EMPTY_PATH 0x00000004
#endif
#define WORK "/tmp/uc"
#define ADIR WORK "/A"
static int duration = 60, nwalkers = 3;
static atomic_int stop, writer_waiting;
static pthread_rwlock_t cur_lock = PTHREAD_RWLOCK_INITIALIZER;
static int cur_fd = -1; /* the root of A', -1 wh
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: don't let a pseudo dentry become the root of a mount
d_alloc_pseudo() hands out dentries for pipes, sockets and other files
that are never anyone's child or parent. They carry DCACHE_NORCU and
dentry_free() frees them right away because no lockless path walk can
ever reach them. That holds as long as such a dentry isn't the root of
a mount. But bind mounting /proc/self/fd/<fd> of such a file does
exactly that.
Most callers of alloc_file_pseudo() put their files on kernel-internal
mounts and may_copy_tree() refuses those. bpf_token_create() doesn't. It
places the token file on the bpffs mount the caller handed it and that
mount is in the caller's mount namespace so the clone goes through:
mount --bind /proc/self/fd/<token> <file>
open_tree(tokfd, "", AT_EMPTY_PATH | OPEN_TREE_CLONE) + move_mount()
__follow_mount_rcu() then loads ->mnt_root of that mount, reads d_seq
and d_flags of the dentry and only then checks mount_lock. The dentry
can be gone by then. The final mntput() of an unmounted parent unhooks
a child that stayed attached to it under mount_lock alone. When the
child's holder does the final put right after that the root is dput()
and freed immediately while a walker that found the mount hashed still
looks at it.
Refuse to clone a mount with a DCACHE_NORCU dentry as its root. Nothing
sensible can be done with a bind mount of a bpf token anyway. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: check the mounts before reading their parents in pivot_root()
path_pivot_root() reads the parents of new_root and of the caller's root
and checks whether they are shared before it checks that either mount is
in the caller's mount namespace. Only namespace_sem is held. That's fine
for a mount that is in the caller's mount namespace.
But new_root can be a file descriptor to a mount that has been unmounted
and that only the file descriptor keeps alive. If that mount stayed
attached to its parent when it was unmounted nothing pins the parent for
it. The final mntput() of the parent unhooks the children under
mount_lock alone and frees the parent afterwards:
pivot_root() close(fd), last ref on the parent
------------ ---------------------------------
ex_parent = new_mnt->mnt_parent
mntput_no_expire_slowpath()
__umount_mnt(new_mnt)
cleanup_mnt()
call_rcu()
IS_MNT_SHARED(ex_parent)
BUG: KASAN: slab-use-after-free in path_pivot_root+0xf1a/0x1840
Read of size 4 at addr ffff8881047382f8 by task pivot_widen/157
path_pivot_root+0xf1a/0x1840
__x64_sys_pivot_root+0x165/0x190
The same goes for the caller's root via chroot(). Both outcomes of the
check end in EINVAL so nothing but the read itself goes wrong. It's the
same thing commit bb4609405752 ("statmount: read the parent of an
unmounted mount under mount_lock") fixed for statmount().
Check that both mounts are in the caller's namespace before their
parents are read. Every path returns EINVAL either way. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: nl80211: check link is beaconing for color change
When trying to do a color change, validate that the link is
beaconing first, to avoid calling the driver with an invalid
link. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: hub: use shorter 120ms post resume hold for SS root hubs
Holding a USB3 hub PM runtime reference for 200ms at hub resume triggers
an AMD platform issue. Users running Android adb report crashes after
adb has been polling and waking up the USB subsystem once a second for
some time. Vendors are working on a solution. Disabling USB runtime PM
is one way to prevent this issue, but it is also proven that reducing the
hold time to 120ms in resume also mitigates it. See Link for more
details.
Reducing the hold time to 120ms for the USB3 roothub is in itself a valid
change and optimization, as the current 200ms is excessive: a root hub
has no upstream suspended hub whose wake propagation needs to be
accounted for, but still need some time for USB3 link training to
complete.
Keep the 200ms hold for external hubs that commit 8f5b7e2bec1c
("usb: hub: fix detection of high tier USB3 devices behind suspended
hubs") is intended for. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: sr: use skb_get_hash_net() in seg6_make_flowlabel()
Since commit d58e468b1112 ("flow_dissector: implements flow dissector
BPF hook") __skb_flow_dissect() needs a net pointer, either from
skb->dev, skb->sk, or since commit 3cbf4ffba5ee ("net: plumb network
namespace into __skb_flow_dissect") a caller provided pointer.
syzbot was able to reach seg6_make_flowlabel() with an skb having
neither skb->dev nor skb->sk set: a TIPC UDP bearer sends a discovery
message through an IPv4 route using seg6 encap, while
net.ipv6.seg6_flowlabel is set to 1.
seg6_make_flowlabel() already has a net pointer, use skb_get_hash_net().
WARNING: net/core/flow_dissector.c:1131 at __skb_flow_dissect+0x910/0x5368 net/core/flow_dissector.c:1126, CPU#0: syz.0.17/4930
Call trace:
__skb_flow_dissect+0x910/0x5368 net/core/flow_dissector.c:1126 (P)
__skb_get_hash_net+0xe0/0x29c net/core/flow_dissector.c:1903
skb_get_hash include/linux/skbuff.h:1663 [inline]
seg6_make_flowlabel+0xcc/0x1ec net/ipv6/seg6_iptunnel.c:132
__seg6_do_srh_encap+0x320/0xbf4 net/ipv6/seg6_iptunnel.c:161
seg6_do_srh+0x4b4/0xa44 net/ipv6/seg6_iptunnel.c:431
seg6_output_core+0x164/0x688 net/ipv6/seg6_iptunnel.c:681
seg6_output+0x44/0x1ac net/ipv6/seg6_iptunnel.c:744
lwtunnel_output+0x3d0/0x664 net/core/lwtunnel.c:356
dst_output include/net/dst.h:470 [inline]
ip_local_out+0x110/0x148 net/ipv4/ip_output.c:131
iptunnel_xmit+0x50c/0xd38 net/ipv4/ip_tunnel_core.c:97
udp_tunnel_xmit_skb+0x220/0x348 net/ipv4/udp_tunnel_core.c:187
tipc_udp_xmit+0x75c/0x9c0 net/tipc/udp_media.c:202
tipc_udp_send_msg+0x214/0x374 net/tipc/udp_media.c:274
tipc_bearer_xmit_skb+0x260/0x3b0 net/tipc/bearer.c:576
tipc_enable_bearer net/tipc/bearer.c:366 [inline]
__tipc_nl_bearer_enable+0xc90/0xfb0 net/tipc/bearer.c:1048
tipc_nl_bearer_enable+0x2c/0x48 net/tipc/bearer.c:1057
genl_family_rcv_msg_doit+0x1e4/0x2d4 net/netlink/genetlink.c:1114 |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Check kernel access when kernel callchains are requested
perf_event_open() currently gates perf_allow_kernel() only on
!attr.exclude_kernel.
However, users can still request kernel callchain collection with
attr.exclude_callchain_kernel == 0 even when attr.exclude_kernel == 1.
That still requires kernel profiling privilege, but the existing check
does not enforce it.
Update the permission check to call perf_allow_kernel() when either
kernel sampling is requested or kernel callchains are requested.
This keeps permission checks aligned with requested data and prevents
unprivileged use of kernel callchain capture. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: codecs: max98363: fix uninitialized stream_config->type
stream_config is not initialized before being passed to
sdw_stream_add_slave(). The type field may contain garbage and is
later copied to stream->type by sdw_config_stream().
Zero-initialize stream_config so type defaults to SDW_STREAM_PCM. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/fpsimd: signal: Forbid non-streaming SVE payload on SME-only systems
When system_supports_sme() is true but system_supports_sve() is false,
restoring a specifically crafted SVE signal context can result in the
task erroneously having non-streaming SVE state. Subsequent attempts to
manipulate the task's FPSIMD/SVE/SME state can result in a variety of
problems, including fatal EL1 UNDEFs.
In such configurations, the kernel always creates an SVE signal context
when delivering a signal, and this can only be in one of two states:
(1) SVE_SIG_FLAG_SM is set, and an SVE payload is present containing
streaming mode SVE state. The recorded VL is the task's live
streaming VL.
(2) SVE_SIG_FLAG_SM is clear, and an SVE payload is not present. The
FPSIMD context contains the non-streaming mode FPSIMD state. The
recorded VL is 0.
Currently restore_sve_fpsimd_context() correctly rejects cases where
SVE_SIG_FLAG_SM is set and an SVE payload is not present, but fails to
reject cases where SVE_SIG_FLAG_SM is clear and an SVE payload is
present. Consequently, restore_sve_fpsimd_context() can place the task
in a state where it has non-streaming SVE state even when this is not
supported by HW.
For example, this can cause a later EL1 UNDEF when the kernel attempts to
restore the task's ZCR_EL1 value:
| # ./sme-sigcontext-to-sve
| Internal error: Oops - Undefined instruction: 0000000002000000 [#1] SMP
| Modules linked in:
| CPU: 0 UID: 0 PID: 131 Comm: sme-sigcontext- Not tainted 7.3.0-rc1 #1 PREEMPT
| Hardware name: linux,dummy-virt (DT)
| pstate: 61402009 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
| pc : fpsimd_restore_current_state+0x258/0x458
| lr : exit_to_user_mode_loop+0xb8/0x188
| sp : ffff80008056be40
| x29: ffff80008056be40 x28: fff00000c1670000 x27: 0000000000000000
| x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000
| x23: ffff80008056bec0 x22: 0000000000000008 x21: 0000000000000040
| x20: 0000000000000081 x19: 0000000008800010 x18: 0000000000000000
| x17: 0000fffffd412570 x16: 0000000000001000 x15: 0000fffffd4123b0
| x14: 0000fffffd412780 x13: 0000fffffd412be8 x12: 0000000047435300
| x11: 0000fffffd412570 x10: 0000000000000000 x9 : 0000000045585401
| x8 : fff00000c18a6c44 x7 : 0000000000000000 x6 : 0000000000000002
| x5 : 0000000000000002 x4 : ffff800080568000 x3 : 0000000000000001
| x2 : 0000000008800010 x1 : fff00000c1670000 x0 : 0000000008800000
| Call trace:
| fpsimd_restore_current_state+0x258/0x458 (P)
| exit_to_user_mode_loop+0xb8/0x188
| el0_svc+0x1cc/0x1d0
| el0t_64_sync_handler+0xa0/0xe4
| el0t_64_sync+0x198/0x19c
| Code: d5384101 f9400020 53175c03 36b80de0 (d5381202)
| ---[ end trace 0000000000000000 ]---
| Kernel panic - not syncing: Oops - Undefined instruction: Fatal exception in interrupt
| Kernel Offset: 0x291fb1000000 from 0xffff800080000000
| PHYS_OFFSET: 0x40000000
| CPU features: 0x0,00000000,0052802f,ffb88f43,3afcf73f
| Memory Limit: none
Rework restore_sve_fpsimd_context() to reject cases where
SVE_SIG_FLAG_SM is clear and an SVE payload is not present. As
parse_user_sigframe() rejects SVE signal frames when neither SVE nor SME
are supported, it isn't necessary for restore_sve_fpsimd_context() to
handle the case where neither are supported. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: ma35d1: Fix clock reference leak in ma35d1serial_probe()
of_clk_get() returns a clock with a reference that has to be released
with clk_put(). ma35d1serial_probe() never does that, so the reference
is leaked on the probe error paths and also when the port is removed.
Release it on the error paths and in ma35d1serial_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: remove stale channels from all sessions on teardown
ksmbd_sessions_deregister() removes a connection's channels from other
sessions' channel lists only while conn->binding is still set:
if (conn->binding) {
hash_for_each_safe(sessions_table, ...)
ksmbd_chann_del(conn, sess);
}
conn->binding is a transient flag: it is cleared once a binding
SESSION_SETUP completes, and also by a subsequent non-binding
SESSION_SETUP on the same connection (a reauthentication on a bound
channel, or a new SessionId==0 setup). A connection that has bound a
channel into another session's ksmbd_chann_list and then clears
conn->binding leaves that channel behind when it disconnects: the
channel, whose chann->conn points at the now freed struct ksmbd_conn,
stays on the owner session's list.
When the owning connection later tears down, the second loop
dereferences the stale channel:
xa_for_each(&sess->ksmbd_chann_list, chann_id, chann)
if (chann->conn != conn)
ksmbd_conn_set_exiting(chann->conn); /* freed */
which is a use-after-free write into the freed ksmbd_conn (the same
stale channel is also walked by show_proc_session() through /proc). The
session is leaked as well, because its channel list never empties.
Remove the conn->binding gate so a connection always removes its
channels from every session on teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
host1x: bus: Fix missing ops null check in error teardown
In host1x_device_init(), the error teardown paths do not check
client->ops before dereferencing it, unlike the forward init paths
which correctly guard with 'client->ops &&'. This can result in a
NULL pointer dereference if client->ops is NULL.
Fix by adding the missing client->ops check in both the teardown
and teardown_late labels. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v4: Don't advertise VLPIs if no ITS is probed
When accidentally setting “kvm-arm.vgic_v4_enable=1” on a system that has
no MSI controller device tree node and GICv4, it results a panic as
“gic_domain” is NULL and the kernel attempts to access it.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028
Mem abort info:
ESR = 0x0000000096000006
CPU: 1 UID: 0 PID: 295 Comm: lkvm-static Not tainted 7.1.0-rc4-ge3f15ad3970e #5 PREEMPT
Hardware name: linux,dummy-virt (DT)
pstate: 81402005 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : __irq_domain_instantiate+0x1d4/0x578
lr : __irq_domain_instantiate+0x1cc/0x578
Set vLPI support to false at init time if the host has no ITS, so it
propagates properly to kvm_vgic_global_state.has_gicv4. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v5: Immediately exec priority drop following activate
With GICv5 an interrupt of equal or lower priority cannot be signalled
until there has been a priority drop. This is done via the GIC CDEOI
system instruction. Once this has been executed, the hardware is able
to signal the next interrupt if there is one.
As all interrupts are programmed to have the same priority, no new
interrupts can be signalled until the priority drop has happened. This
can cause issues when, for example, an interrupt remains active while
a long running process takes place, such as when injecting a physical
interrupt into a guest VM in software.
The GICv5 driver has so far done the priority drop as part of
irq_eoi(), i.e., at the same time as deactivating the interrupt. This
means that any long running process (or VM) could block incoming
interrupts, effectively causing a denial of service for all other
interrupts.
Rather than doing the EOI as part of irq_eoi() (which the name would
suggest would be a good place for it), move it to happen immediately
after acknowledging an interrupt in the main GICv5 interrupt
handler. The deactivation of interrupts (GIC CDDI) remains implemented
as part of irq_eoi(), which means that the same interrupt cannot be
signalled a second time until deactivated by software. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: handle set_blocksize failures
ntfs3 uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call. |
