| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in grub2. When reading a symbolic link's name from a UFS filesystem, grub2 fails to validate the string length taken as an input. The lack of validation may lead to a heap out-of-bounds write, causing data integrity issues and eventually allowing an attacker to circumvent secure boot protections. |
| A flaw was found in grub2. When reading tar files, grub2 allocates an internal buffer for the file name. However, it fails to properly verify the allocation against possible integer overflows. It's possible to cause the allocation length to overflow with a crafted tar file, leading to a heap out-of-bounds write. This flaw eventually allows an attacker to circumvent secure boot protections. |
| A flaw was found in grub2. The calculation of the translation buffer when reading a language .mo file in grub_gettext_getstr_from_position() may overflow, leading to a Out-of-bound write. This issue can be leveraged by an attacker to overwrite grub2's sensitive heap data, eventually leading to the circumvention of secure boot protections. |
| When reading the language .mo file in grub_mofile_open(), grub2 fails to verify an integer overflow when allocating its internal buffer. A crafted .mo file may lead the buffer size calculation to overflow, leading to out-of-bound reads and writes. This flaw allows an attacker to leak sensitive data or overwrite critical data, possibly circumventing secure boot protections. |
| A flaw was found in grub2. A specially crafted JPEG file can cause the JPEG parser of grub2 to incorrectly check the bounds of its internal buffers, resulting in an out-of-bounds write. The possibility of overwriting sensitive information to bypass secure boot protections is not discarded. |
| An out-of-bounds write flaw was found in X.Org and Xwayland. The function GetBarrierDevice() searches for the pointer device based on its device ID and returns the matching value, or supposedly NULL, if no match was found. However, the code will return the last element of the list if no matching device ID is found, which can lead to out-of-bounds memory access. |
| A heap overflow flaw was found in X.Org and Xwayland. The computation of the length in XkbSizeKeySyms() differs from what is written in XkbWriteKeySyms(), which may lead to a heap-based buffer overflow. |
| A buffer overflow flaw was found in X.Org and Xwayland. The code in XkbVModMaskText() allocates a fixed-sized buffer on the stack and copies the names of the virtual modifiers to that buffer. The code fails to check the bounds of the buffer and would copy the data regardless of the size. |
| A heap-based buffer overflow flaw was found in the rsync daemon. This issue is due to improper handling of attacker-controlled checksum lengths (s2length) in the code. When MAX_DIGEST_LEN exceeds the fixed SUM_LENGTH (16 bytes), an attacker can write out of bounds in the sum2 buffer. |
| The TIFF decoder can panic when decoding an invalid image with an out-of-bounds strip offset. |
| An unauthenticated
out-of-bounds write vulnerability exists in onvif.cgi in GeoVision GV-LPC2011
and GV-LPC2211 V1.12 and earlier. The vulnerability is caused by insufficient
bounds checking when processing HTTP request body data. A remote attacker may
exploit this vulnerability by sending a crafted request with excessive input,
causing memory corruption and resulting in a denial of service. |
| A flaw was found in GraphicsMagick's Photo CD (PCD) decoder. A remote attacker could exploit this vulnerability by providing a specially crafted PCD file. This could lead to an out-of-bounds write, corrupting memory and potentially causing a denial of service or other unpredictable system behavior. |
| dsp_mmap_single() validated the requested mapping by checking the sum of the user-supplied offset and length against the buffer size. This addition could overflow, so that a large offset and length wrapped around and passed the check. The offset was then narrowed from 64 to 32 bits when converted to a buffer address, yielding a mapping that extended past the audio buffer into unrelated kernel memory.
The /dev/dsp device nodes are world-accessible by default. On a system with an audio device, either issue allows an unprivileged local user to read and write kernel memory, which can be used to escalate privileges, potentially gaining full control of the affected system. At a minimum, an attacker can crash the kernel, resulting in a Denial of Service (DoS). |
| libssh2 through 1.11.1 reads an attacker-controlled 32-bit attribute count from a publickey-subsystem response and uses it in the allocation num_attrs * sizeof(libssh2_publickey_attribute) without bounds checking, so on 32-bit platforms the multiplication overflows to an undersized buffer. A malicious SSH server can then drive the attribute-parsing loop to write past the allocation, causing a heap buffer overflow in a connecting libssh2 client. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Add buffer overflow check in MS get_info_ioctl
Add validation that the info size returned from the metric stream info
query is not exceeded when checked against the allocated buffer size.
If the firmware returns a size larger than the buffer, reject the
operation with -EOVERFLOW instead of proceeding with an incorrect
buffer copy. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mvpp2: limit XDP frame size to the RX buffer
mvpp2 has short and long BM pools, and short pool buffers can be smaller
than PAGE_SIZE. The XDP path nevertheless initializes every xdp_buff with
PAGE_SIZE as frame size.
XDP helpers use frame_sz to validate tail growth and to derive the hard
end of the data area. Advertising PAGE_SIZE for short buffers can let
bpf_xdp_adjust_tail() grow a packet past the real allocation, corrupting
memory or later tripping skb tailroom checks.
Initialize the XDP buffer with bm_pool->frag_size so XDP tailroom matches
the actual buffer backing the packet. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: kl5kusb105: fix bulk-out buffer overflow
klsi_105_prepare_write_buffer() is called by the generic write path
with the bulk-out buffer and its size (bulk_out_size, 64 bytes). It
stores a two-byte length header at the start of the buffer and copies
the payload from the write fifo starting at buf + KLSI_HDR_LEN, but
passes the full buffer size as the number of bytes to copy:
count = kfifo_out_locked(&port->write_fifo, buf + KLSI_HDR_LEN,
size, &port->lock);
When the fifo holds at least size bytes, size bytes are copied starting
two bytes into the size-byte buffer, writing KLSI_HDR_LEN bytes past its
end. Copy at most size - KLSI_HDR_LEN bytes instead, leaving room for
the header as safe_serial already does.
Writing bulk_out_size or more bytes to the tty triggers a slab
out-of-bounds write, observed with KASAN by emulating the device with
dummy_hcd and raw-gadget:
BUG: KASAN: slab-out-of-bounds in kfifo_copy_out+0x83/0xc0
Write of size 64 at addr ffff888112c62202 by task python3
kfifo_copy_out
klsi_105_prepare_write_buffer [kl5kusb105]
usb_serial_generic_write_start [usbserial]
Allocated by task 139:
usb_serial_probe [usbserial]
The buggy address is located 2 bytes inside of allocated 64-byte region
The out-of-bounds write no longer occurs with this change applied. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ethosu: fix OOB write in ethosu_gem_cmdstream_copy_and_validate()
The command stream parsing loop increments the index variable a second
time when a 64-bit command word is encountered (bit 14 set), but does
not re-check the loop bound before writing the second word:
for (i = 0; i < size / 4; i++) {
bocmds[i] = cmds[0];
if (cmd & 0x4000) {
i++;
bocmds[i] = cmds[1]; /* unchecked */
}
}
The buffer bocmds is backed by a DMA allocation of exactly size bytes
from drm_gem_dma_create(ddev, size), giving valid indices [0, size/4-1].
When i == size/4 - 1 on entry to an iteration and bit 14 of cmds[0] is
set, bocmds[size/4-1] is written in bounds, i is then incremented to
size/4, and bocmds[size/4] writes four bytes past the end of the
allocation.
Userspace controls both the buffer contents and the size argument via
the ioctl, making this a userspace-triggerable heap out-of-bounds write.
Fix by checking the incremented index against the buffer bound before
the second write and returning -EINVAL if the buffer is too small to
contain the extended command. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2/dlm: validate qr_numregions in dlm_match_regions()
Patch series "ocfs2/dlm: fix two bugs in dlm_match_regions()".
In dlm_match_regions(), the qr_numregions field from a DLM_QUERY_REGION
network message is used to drive loops over the qr_regions buffer without
sufficient validation. This series fixes two issues:
- Patch 1 adds a bounds check to reject messages where qr_numregions
exceeds O2NM_MAX_REGIONS. The o2net layer only validates message
byte length; it does not constrain field values, so a crafted message
can set qr_numregions up to 255 and trigger out-of-bounds reads past
the 1024-byte qr_regions buffer.
- Patch 2 fixes an off-by-one in the local-vs-remote comparison loop,
which uses '<=' instead of '<', reading one entry past the valid range
even when qr_numregions is within bounds.
This patch (of 2):
The qr_numregions field from a DLM_QUERY_REGION network message is used
directly as loop bounds in dlm_match_regions() without checking against
O2NM_MAX_REGIONS. Since qr_regions is sized for at most O2NM_MAX_REGIONS
(32) entries, a crafted message with qr_numregions > 32 causes
out-of-bounds reads past the qr_regions buffer.
Add a bounds check for qr_numregions before entering the loops. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix listxattr handling when the buffer is full
[BUG]
If an OCFS2 inode has both inline and block-based xattrs, listxattr()
can return a size larger than the caller's buffer when the inline names
consume that buffer exactly.
kernel BUG at mm/usercopy.c:102!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:usercopy_abort+0xb7/0xd0 mm/usercopy.c:102
Call Trace:
__check_heap_object+0xe3/0x120 mm/slub.c:8243
check_heap_object mm/usercopy.c:196 [inline]
__check_object_size mm/usercopy.c:250 [inline]
__check_object_size+0x5c5/0x780 mm/usercopy.c:215
check_object_size include/linux/ucopysize.h:22 [inline]
check_copy_size include/linux/ucopysize.h:59 [inline]
copy_to_user include/linux/uaccess.h:219 [inline]
listxattr+0xb0/0x170 fs/xattr.c:926
filename_listxattr fs/xattr.c:958 [inline]
path_listxattrat+0x137/0x320 fs/xattr.c:988
__do_sys_listxattr fs/xattr.c:1001 [inline]
__se_sys_listxattr fs/xattr.c:998 [inline]
__x64_sys_listxattr+0x7f/0xd0 fs/xattr.c:998
...
[CAUSE]
Commit 936b8834366e ("ocfs2: Refactor xattr list and remove
ocfs2_xattr_handler().") replaced the old per-handler list accounting
with ocfs2_xattr_list_entry(), but it kept using size == 0 to detect
probe mode.
That assumption stops being true once ocfs2_listxattr() finishes the
inline-xattr pass. If the inline names fill the caller buffer exactly,
the block-xattr pass runs with a non-NULL buffer and a remaining size of
zero. ocfs2_xattr_list_entry() then skips the bounds check, keeps
counting block names, and returns a positive size larger than the
supplied buffer.
[FIX]
Detect probe mode by testing whether the destination buffer pointer is
NULL instead of whether the remaining size is zero.
That restores the pre-refactor behavior and matches the OCFS2 getxattr
helpers. Once the remaining buffer reaches zero while more names are
left, the block-xattr pass now returns -ERANGE instead of reporting a
size larger than the allocated list buffer. |
