| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability classified as critical has been found in Multilaser Sirius RE016 MLT1.0. Affected is an unknown function of the file /cgi-bin/cstecgi.cgi of the component Password Change Handler. The manipulation leads to improper authentication. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Himmelblau is an interoperability suite for Microsoft Azure Entra ID and Intune. A vulnerability present in versions 0.9.10 through 0.9.16 allows a user to authenticate to a Linux host via Himmelblau using an *invalid* Linux Hello PIN, provided the host is offline. While the user gains access to the local system, Single Sign-On (SSO) fails due to the network being down and the inability to issue tokens (due to a failure to unlock the Hello key). The core issue lies in an incorrect assumption within the `acquire_token_by_hello_for_business_key` function: it was expected to return a `TPMFail` error for an invalid Hello key when offline, but instead, a preceding nonce request resulted in a `RequestFailed` error, leading the system to erroneously transition to an offline success state without validating the Hello key unlock. This impacts systems using Himmelblau for authentication when operating in an offline state with Hello PIN authentication enabled. Rocky Linux 8 (and variants) are not affected by this vulnerability. The problem is resolved in Himmelblau version 0.9.17. A workaround is available for users who cannot immediately upgrade. Disabling Hello PIN authentication by setting `enable_hello = false` in `/etc/himmelblau/himmelblau.conf` will mitigate the vulnerability. |
| Himmelblau is an interoperability suite for Microsoft Azure Entra ID and Intune. Himmelblau versions 0.9.0 through 0.9.14 and 1.00-alpha are vulnerable to a privilege escalation issue when Entra ID group-based access restrictions are configured using group display names instead of object IDs. Starting in version 0.9.0, Himmelblau introduced support for specifying group names in the `pam_allow_groups` configuration option. However, Microsoft Entra ID permits the creation of multiple groups with the same `displayName` via the Microsoft Graph API—even by non-admin users, depending on tenant settings. As a result, a user could create a personal group with the same name as a legitimate access group (e.g., `"Allow-Linux-Login"`), add themselves to it, and be granted authentication or `sudo` rights by Himmelblau. Because affected Himmelblau versions compare group names by either `displayName` or by the immutable `objectId`, this allows bypassing access control mechanisms intended to restrict login to members of official, centrally-managed groups. This issue is fixed in Himmelblau version **0.9.15** and later. In these versions, group name matching in `pam_allow_groups` has been deprecated and removed, and only group `objectId`s (GUIDs) may be specified for secure group-based filtering. To mitigate the issue without upgrading, replace all entries in `pam_allow_groups` with the objectId of the target Entra ID group(s) and/or audit your tenant for groups with duplicate display names using the Microsoft Graph API. |
| A vulnerability was found in knightliao Disconf 2.6.36. It has been classified as critical. This affects an unknown part of the file /api/config/list of the component Configuration Center. The manipulation leads to improper authentication. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. |
| CWE-287: Improper Authentication vulnerability exists that could cause Denial of access to the web interface
when someone on the local network repeatedly requests the /accessdenied URL. |
| passport-wsfed-saml2 provides passport strategy for both WS-fed and SAML2 protocol. A vulnerability present starting in version 3.0.5 up to and including version 4.6.3 allows an attacker to impersonate any user during SAML authentication by tampering with a valid SAML response. This can be done by adding attributes to the response. Users are affected specifically when the service provider is using `passport-wsfed-saml2` and a valid SAML Response signed by the Identity Provider can be obtained. Version 4.6.4 contains a fix for the vulnerability. |
| An attacker can bypass authorization checks and force a Step CA ACME or SCEP provisioner to create certificates without completing certain protocol authorization checks. |
| An authentication bypass vulnerability has been found in Thesamur's AutoGPT. This vulnerability allows an attacker to bypass authentication mechanisms. Once inside the web application, the attacker can use any of its features regardless of the authorisation method used. |
| Incorrect authentication vulnerability in OpenSIAC, which could allow an attacker to impersonate a person using Cl@ve as an authentication method. |
| An issue was discovered in the COROS application through 3.8.12 for Android. Bluetooth pairing and bonding is neither initiated nor enforced by the application itself. Also, the watch does not enforce pairing and bonding. As a result, any data transmitted via BLE remains unencrypted, allowing attackers within Bluetooth range to eavesdrop on the communication. Furthermore, even if a user manually initiates pairing and bonding in the Android settings, the application continues to transmit data without requiring the watch to be bonded. This fallback behavior enables attackers to exploit the communication, for example, by conducting an active machine-in-the-middle attack. |
| FACTION is a PenTesting Report Generation and Collaboration Framework. Authentication is bypassed when an attacker registers a new user with admin privileges. This is possible at any time without any authorization. The request must follow the validation rules (no missing information, secure password, etc) but there are no other controls stopping them. This vulnerability is fixed in 1.4.3. |
| Scratch-Coding-Hut.github.io is the website for Coding Hut. The website as of 28 February 2025 contained a sign in with scratch username and password form. Any user who used the sign in page would be susceptible to any other user signing into their account. As of time of publication, a fix is not available but work on a fix is underway. As a workaround, users should avoid signing in. |
| MinIO is a high performance object storage. Starting in RELEASE.2024-06-06T09-36-42Z and prior to
RELEASE.2025-02-28T09-55-16Z, a bug in evaluating the trust of the SSH key used in an SFTP connection to MinIO allows authentication bypass and unauthorized data access. On a MinIO server with SFTP access configured and using LDAP as an external identity provider, MinIO supports SSH key based authentication for SFTP connections when the user has the `sshPublicKey` attribute set in their LDAP server. The server trusts the client's key only when the public key is the same as the `sshPublicKey` attribute. Due to the bug, when the user has no `sshPublicKey` property in LDAP, the server ends up trusting the key allowing the client to perform any FTP operations allowed by the MinIO access policies associated with the LDAP user (or any of their groups). Three requirements must be met in order to exploit the vulnerability. First, the MinIO server must be configured to allow SFTP access and use LDAP as an external identity provider. Second, the attacker must have knowledge of an LDAP username that does not have the `sshPublicKey` property set. Third, such an LDAP username or one of their groups must also have some MinIO access policy configured. When this bug is successfully exploited, the attacker can perform any FTP operations (i.e. reading, writing, deleting and listing objects) allowed by the access policy associated with the LDAP user account (and their groups). Version 1.2.0 fixes the issue. |
| Ratify is a verification engine as a binary executable and on Kubernetes which enables verification of artifact security metadata and admits for deployment only those that comply with policies the user creates. In a Kubernetes environment, Ratify can be configured to authenticate to a private Azure Container Registry (ACR). The Azure workload identity and Azure managed identity authentication providers are configured in this setup. Users that configure a private ACR to be used with the Azure authentication providers may be impacted by a vulnerability that exists in versions prior to 1.2.3 and 1.3.2. Both Azure authentication providers attempt to exchange an Entra ID (EID) token for an ACR refresh token. However, Ratify’s Azure authentication providers did not verify that the target registry is an ACR. This could have led to the EID token being presented to a non-ACR registry during token exchange. EID tokens with ACR access can potentially be extracted and abused if a user workload contains an image reference to a malicious registry. As of versions 1.2.3 and 1.3.2, the Azure workload identity and Azure managed identity authentication providers are updated to add new validation prior to EID token exchange. Validation relies upon registry domain validation against a pre-configured list of well-known ACR endpoints. EID token exchange will be executed only if at least one of the configured well-known domain suffixes (wildcard support included) matches the registry domain of the image reference. |
| A vulnerability was identified in the NVDA Remote (version 2.6.4) and Tele NVDA Remote (version 2025.3.3) remote connection add-ons, which allows an attacker to obtain total control of the remote system by guessing a weak password. The problem occurs because these add-ons accept any password entered by the user and do not have an additional authentication or computer verification mechanism. Tests indicate that more than 1,000 systems use easy-to-guess passwords, many with less than 4 to 6 characters, including common sequences. This allows brute force attacks or trial-and-error attempts by malicious invaders. The vulnerability can be exploited by a remote attacker who knows or can guess the password used in the connection. As a result, the attacker gains complete access to the affected system and can execute commands, modify files, and compromise user security. |
| A misconfigured query in UniFi Network (v9.1.120 and earlier) could allow users to authenticate to Enterprise WiFi or VPN Server (l2tp and OpenVPN) using a device’s MAC address from 802.1X or MAC Authentication, if both services are enabled and share the same RADIUS profile. |
| An authentication bypass vulnerability was found in Videx's CyberAudit-Web. Through the exploitation of a logic flaw, an attacker could create a valid session without any credentials. This vulnerability has been patched in versions later than 9.5 and a patch has been made available to all instances of CyberAudit-Web, including the versions that are End of Maintenance (EOM). Anyone that requires support with the resolution of this issue can contact support@videx.com for assistance. |
| A flaw exists in the Windows login flow where an AuthContext token can
be exploited for replay attacks and authentication bypass. |
| Minion event bus authorization bypass. An attacker with access to a minion key can craft a message which may be able to execute a job on other minions (>= 3007.0). |
| Spring Cloud Config Server may not use Vault token sent by clients using a X-CONFIG-TOKEN header when making requests to Vault.
Your application may be affected by this if the following are true:
* You have Spring Vault on the classpath of your Spring Cloud Config Server and
* You are using the X-CONFIG-TOKEN header to send a Vault token to the Spring Cloud Config Server for the Config Server to use when making requests to Vault and
* You are using the default Spring Vault SessionManager implementation LifecycleAwareSessionManager or a SessionManager implementation that persists the Vault token such as SimpleSessionManager.
In this case the SessionManager persists the first token it retrieves and will continue to use that token even if client requests to the Spring Cloud Config Server include a X-CONFIG-TOKEN header with a different value.
Affected Spring Products and Versions
Spring Cloud Config:
* 2.2.1.RELEASE - 4.2.1
Mitigation
Users of affected versions should upgrade to the corresponding fixed version.
Affected version(s)Fix versionAvailability4.2.x4.2.2OSS4.1.x4.1.6OSS4.0.x4.0.10Commercial3.1.x3.1.10Commercial3.0.x4.1.6OSS2.2.x4.1.6OSS
NOTE: Spring Cloud Config 3.0.x and 2.2.x are no longer under open source or commercial support. Users of these versions are encouraged to upgrade to a supported version.
No other mitigation steps are necessary. |
